2000 Cadillac Eldorado Etc Coupe 2-door 4.6l Hunter Green With Sunroof on 2040-cars

Auto blog

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.

2020 Cadillac CT5 loses the fake scoop

Well folks, the inevitable has happened. The 2020 Cadillac CT5 luxury sports sedan prototype has shed its hood scoop. Yes, we're as disappointed as you are that instead of being outrageous and brash, Cadillac is still going to try to be classy, understated and luxurious when it comes to its mainline models. And yes, we're being sarcastic here ... but there's a part of us that would kind of like to see the scoop survive. Anyway, the good news is that the scoop is only one of a few bits of fake bodywork and camouflage that the CT5 has shed. As such, we get our best look yet at the new Cadillac sedan, and it looks pretty good. The grille is very wide and not nearly as tall as the prominent prows of current Cadillacs. It actually doesn't even look as tall as the grille of the Escala concept that inspired the CT5's design. The profile of the CT5 isn't too radically different from existing Caddies, with a long hood and a short trunk. It is still a conventional sedan, though, and not a sedan-like hatchback like the Kia Stinger and Audi A5 Sportback and A7. This is evident by the open trunk lid our spy photographer caught. The taillights also continue to be slim and vertical, though we can't quite tell if they will have a horizontal elements at the bottom like on the XTS and XT4. The car also has very bold and thick angular exhaust tips. We expect the CT5 will go into production in 2019 as a 2020 model, and it will likely take the place of both the CTS and ATS, but not be much smaller than the CTS. It will likely use versions of existing Cadillac engines including the 2.0-liter turbo four-cylinder, naturally aspirated 3.6-liter V6, and twin-turbo 3.0-liter V6. We wouldn't rule out the 4.2-liter twin-turbo V8 for a potential CT5-V in the future. Related Video:

2019 Cadillac CT6-V preorders start at $89,785

Cadillac's top-of-range sedan will start at less than $90,000, just barely. At the North American International Auto Show in Detroit, Cadillac announced it is opening preorders for the 2019 CT6-V, which will start at $89,785. Keeping things exclusive, Cadillac has 275 preorder slots available to the U.S. market for the CT6-V. It will briefly join the ATS-V and the CTS-V to give Caddy a trio of powerful sedans before the ATS-V and CTS-V bow out after the 2019 model year to make way for new models. Cadillac offers less powerful V-Sport variants, as well. The CT6-V, formerly the CT6 V-Sport, uses a Cadillac-exclusive powertrain. The twin-turbo 4.2-liter V8 makes a claimed 550 horsepower and 627 lb-ft of torque. This engine is hand-built and nicknamed the "Blackwing." It is linked to a 10-speed automatic transmission, which puts power to the ground through Cadillac's all-wheel-drive system. As an added luxury perk to buying the CT6-V, Cadillac will include 2 days at the V-Performance Academy at Spring Mountain. The trip is essentially all expenses paid, with tuition and luxury accommodation part of the package. Cadillac estimates the first CT6-V models to arrive in mid-2019. Now, it was widely reported that the Detroit-Hamtramck production facility that builds the CT6 would be among those closed by GM. Cadillac President Steve Carlisle told Automotive News, however, that the company is exploring production alternatives to keep the flagship luxury sedan for sale in the United States. Apparently, it was never actually on the chopping block, and instead, officials at the time of the plant closure announcement failed to mention that CT6 production would be moved rather than cancelled. Where that new facility would be has yet to be announced, but Carlisle told Automotive News that moving production to China, where the CT6 Plug-In Hybrid is built, is "the least-preferred option." Related Video: