2023 Cadillac Ct5 Sport on 2040-cars

Auto blog

2020 Cadillac CT5 prototype shows off more lighting details

The elusive 2020 Cadillac CT5 luxury sports sedan has once again been spotted by a spy photographer. This time, we get to see it from all angles, whereas last time we only saw it from the front. It still has quite a bit of fake body work, and it's very clear Cadillac still hopes you'll think this is a Charger, from the big hood scoop to the fake full-width taillights. Digging past those misdirects, we can find some new details about the car. First, the car's front lighting has developed further. There are production-ready headlights fitted that appear to have some sort of LED illumination. These production lights also fit the shape we saw on the last prototype, so they'll end high up on the body, extending slightly horizontally toward the grille. There's still a section that extends back along the fender, seeming to bridge the gap between current Cadillacs and the Escala concept from which this car takes inspiration. Another addition are the vertical LED accent lights. This is another trademark feature of both current Cadillacs and the Escala, but they were absent from the last prototype we saw. We also get a look at some of the grille's details. Instead of slats, this CT5 has a plastic mesh of small rectangles. The pattern is reminiscent of brickwork. These photos also give us our first look at the back of the CT5. It looks like a fairly typical Cadillac. It's much more conservative than the front end. There are some angular cutouts in the bumper to allow exhaust gases out. The taillights have the current Cadillac look with the top curving over the rear fender. We can't tell if there will be a horizontal element like on the Escala, due to the fake lights. We're expecting the CT5 to be shown sometime next year in time for the 2020 model year. Odds are it will use off-the-shelf Cadillac engines including the turbocharged 2.0-liter four-cylinder, naturally aspirated 3.6-liter V6, and the twin-turbo 3.0-liter V6. Now that Cadillac has revealed its twin-turbo 4.2-liter V8, we'll be interested to see if that shows up in a future CT5-V. Related Video: Featured Gallery Cadillac CT5 prototype spy shots View 23 Photos Image Credit: SpiedBilde Spy Photos Cadillac Luxury Sedan cadillac ct5 cadillac escala

Ghostbusters' Ecto-1 detailed in behind-the-scenes video

The Ghostbusters reboot is coming, ready or not. And along with a gender swap between the 'busters and their secretary, the team's trusty chariot, Ecto-1, is getting a refresh. It's still a specialized Cadillac, but that's where the similarities end, judging by the new featurette you see above. Instead of a 1959 Cadillac Miller-Meteor Ambulance, 2016's Ecto-1 is a 1982 Cadillac Deville. And instead of being built to keep people from dying, the new car is meant to transport the dead. Yep, it's a hearse. It's hard not to find some kind of hidden meaning there, but this video doesn't mention it. What we have learned here is that the way the new Ghostbusters acquire their vehicle is a little bit different than it was in the original film. In the 1984 version, Dr. Ray Stantz, played by Dan Aykroyd, bought the 1959 ambulance for $4,800 – the equivalent of $11,000 today – despite a litany of problems. It was clear in the film that Ecto-1 was dilapidated long before the Ghostbusters breathed life back into it. But in the new film, the team acquires Ecto-1 from the uncle of Patty Tolan – Leslie Jones' character. And based on the film featurette, it looks like it's in solid shape before the team adds its distinctive livery and logo. You can learn more about the car, see parts of the build process, and hear the cast and crew talk about it in this two-minute featurette. Ghostbusters hits theaters on July 15. Related Video:

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.