1970 Buick Gsx Tribute on 2040-cars

Auto blog

1987 Buick Grand National was made to be Kevin Hart's 'Dark Knight'

The Meguiar's booth at the SEMA show isn't the only place comedian and actor Kevin Hart is combining cars and cinema, his "Michael Myers" 1969 Plymouth Road Runner brooding in the car care products pen, while his SpeedKore "Hellraiser" 1970 Dodge Charger also menaces. Hart bought a 1987 Buick GNX last year and put it on Instagram with the caption, "Sundays are perfect for old school drives…. If you know you know." Looks like old G-Bodies are perfect for restomod builds, too, which we all already knew, but this car isn't the GNX that featured on social media. This is the 1987 Buick Grand National, one step below the GNX and half the price at the time. It's nicknamed "Dark Knight" and it's one of the stars of the Magnaflow exhaust booth at SEMA. Going back to work with regular collaborators Dave Salvaggio of Salvaggio Design and Sean Smith, of course there's a lot involved in the overhaul. Still, we appreciate how the team stayed true to the ethos of the Grand National in ways that made the build more complicated than it already was. Take the engine. The original came with a 3.8-liter V6 wearing a single turbocharger to register an official output of 245 horsepower and 355 pound-feet of torque compared to the GNX's 276 hp and 320 lb-ft. Instead of swapping it for a V8, it's been replaced with the 3.6-liter twin-turbo V6 from the Cadillac CT4-V Blackwing. And instead of leaving both turbos on, the engine junkies plumbed a single turbo in a layout recalling the 1987 engine even as it cleans up the original Chutes 'n' Ladders mess of tubes. We didn't get an output rating for the setup. The Cadillac's twin-turbo mill makes 472 hp and 445 lb-ft. in the CT4-V Blackwing. We would bet Dark Knight's engine's pretty close to that with the single large turbo at the prow, plenty of juice for a car weighing 3,545 pounds. Exterior upgrades include a custom front fascia with a carbon fiber hood and splitter. The interior shows the same tasteful restraint, polished design and nicer materials draped over the stock 1980s layout. That shifter controls GM's 8L90 eight-speed automatic instead of the original four-speed auto.  Elsewhere, Salvaggio did the same here as with the Michael Myers Road Runner, creating a custom frame to increase rigidity and get the car closer to the ground on its 19-inch HRE wheels in the Buick's original weave look.

Buick's new logo ditches the ring, levels the shields

Buick's logo is about to receive a relatively major update. The new-look emblem appeared in a trademark filing in March 2022, and a leaked image posted on social media has given us a better look at the design that should appear on production cars in the not-too-distant future. Published on Instagram by an account called Buick_Saudi_Arabia, the photo shows what seems to be Buick's new logo on the middle of a steering wheel. The changes made aren't groundbreaking, but they're certainly noticeable. The ring is gone, and the red, white, and blue shields are separated from each other and positioned on the same level. As of writing, the shields are staggered and surrounded by a ring.           View this post on Instagram                       A post shared by Buick Saudi Arabia (@buick_saudi_arabia) One question that comes to mind is: why now? Buick has used its current logo for decades without significantly updating it, so what prompted the company to give the design a makeover? Several factors undoubtedly influenced this decision, but one that's worth shining light on is that the brand is no longer twinned with Germany-based Opel. For many years, some Opel-designed models made their way to the United States with Buick emblems on both ends. No one in Europe has heard of a Buick Regal; folks there know the sedan as the Opel Insignia. And, since the visual differences between these cars were often minor, using a Buick logo whose basic silhouette was similar to Opel's logo simplified the design process. Neatly integrating, say, Chevrolet's bowtie-shaped emblem into the Insignia's grille would have been harder, though more improbable acts of badge-engineering have been committed (the Ford Maverick was once a Nissan). General Motors sold Opel to PSA Peugeot-Citroen in 2017, and both carmakers are now part of Stellantis, so Buick's trans-Atlantic design ties have been cut. Losing the Opel connection gives Buick's design team more leeway to experiment with new ideas, like a revamped logo. Keep in mind that nothing is official yet. Full details and an explanation of what the new logo means should emerge soon. Why the shields? Buick isn't rooted in sword-fighting, so why have shields appeared on its cars for over 60 years? The answer, according to Buick, is relatively vague. What's certain is that the tri-shield logo didn't appear on Buick's early cars.

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.