2009 Buick Lucerne Cxl on 2040-cars

Auto blog

2021 Buick Envision's bold design means small space gains, a few big losses

So far, every preview we've had of the 2021 Buick Envision compels us to believe that it isn't playing in the same league as the current Envision, nor is it playing the same sport. The chiseled, crisp exterior is matched by an interior that, in pictures at least, sends a genuine premium message. GM Authority got early intel on dimensions for the new crossover, the numbers showing that the only close relationship between the current and the new Envision is in size. According to GMA, the 2021 Buick will be 185.5 inches long on a wheelbase of 109.4 inches, it'll stand 74.1 inches wide without mirrors, and 64.6 inches tall. Front and rear tracks are matched at 63.3 inches. That makes the new version 1.8 inches longer than the current five-seater, with a wheelbase stretched 0.9 inches, while width is 1.7 inches wider but overall height is 2.2 inches lower. The track has been expanded by 1.3 inches front and back. The four-trim lineup will be base, Preferred, Essence and Avenir. Buick's website pegs the current Envision at the single curb weight of 3,755 pounds. GMA writes that the new car comes in at 3,685 pounds in base form, or 3,932 in top Avenir trim. Those could all represent weights for front-wheel-drive models. AWD will be optional on all but the base 2021 Envision. The price for edgier design is a tiny cut in interior room in front. In the coming crossover, front headroom shrinks 0.4 inches to 39.6 inches, front legroom shrinks by 0.5 inches, front shoulder room goes down by 0.3 inches. Front hip room gains 0.7 inches, however, Occupants in the row behind get a tiny bit more space in two dimensions, rear headroom going up 0.4 inches, rear legroom by 1.8 inches, Rear shoulder room gets shaved 0.7 inches, and those haunches on the 2021 model take a bite out of rear hip room, that spec dropping by 5.7 inches to 47.4.  Cargo room sees a slight dip, too, there being 25.2 cubic feet of space behind the second-row of seats compared to 26.9 feet available now. The gap grows with the rear seats down, the coming Envision able to swallow 52.7 cubic feet behind the front row, the current Envision managing 60 cubic feet.  When product starts showing up on dealer lots, we're to expect a 2.0-liter turbocharged four-cylinder under the hood with 230 horsepower and 258 pound-feet of torque, shifting through GM's nine-speed automatic transmission. GMA believes pricing will start around $34,000, which would be about $500 more than the current Envision.    

Buick version of Equinox/Terrain CUV spied testing... with autonomous gear?

Let's get the most pressing bits of this story out of the way right off the bat: What we see here appears to be a new compact crossover from Buick. According to the spy photographer, this machine may be a little bit smaller on the outside than the current Chevrolet Equinox and GMC Terrain 'utes, which makes sense since recent rumors suggest GM's small crossovers will migrate to a new platform that will mark a convergence between the automaker's Delta (Chevy Cruze, Buick Verano) and Theta (Equinox, Terrain) platforms. This Buick would likely use this new D2UX platform.
We've been expecting Buick to unleash a crossover to slot between the very small Encore and the very large Enclave, and various rumors have indicated that the model may be known as either the Anthem or Envision. It's worth mentioning that Buick had planned, back in 2009, to release a vehicle in the compact CUV market, but abandoned those plans after a particularly poor reception.
And now for something completely different... Take another look at the spy shots above, and pay special attention to the cylindrical device mounted to the vehicle's roof. We can't say for sure what it is, but our spy photographer opines that it looks quite a bit like the 360-degree Lidar camera equipment used by Google for its autonomous cars. Is General Motors working with Google on autonomous car technology? We don't know, but you can definitely consider us intrigued.

Question of the Day: Best recipient for supercharged GM V6?

The good old Buick V6 engine was built from 1961 through 2008 (including a decade of production by Kaiser-Jeep) and went into way too many General Motors vehicles to list here. In 1991, the supercharged version of the 3800 was introduced, with a Roots-style Eaton blower on top, and now you can find these engines in just about every junkyard in North America. The 3800 shares a bellhousing pattern with the also-made-by-the-zillions GM 60° V6 engine, which means that it will install (with varying levels of sledgehammer clearancing and/or axle mix-and-matching) into plenty of GM vehicles that never received the 3800 from the factory. That means one thing: engine swaps! An excellent example of this is the 1992 Chevrolet Lumina APV "Dustbuster" minivan, which is a fully caged high-performance road-racing machine that features a supercharged 3800 and 5-speed manual transmission under its long, vacuum-cleaner-snout-like hood. The RaceVan, in Springfield Monorail livery, will compete this weekend at the Michigan 24 Hours of LeMons race with Autobloggers Mike Austin, David Gluckman, and Alex Kierstein at the wheel. My personal choice for supercharged 3800 power, though, has to be the Cadillac Cimarron, preferably the not-so-sought-after Cimarron d'Oro Edition. Some bashing and welding and cutting and pasting and this lightweight Cavalier sibling could have well over double its original horsepower. So, what's your blown 3800 engine-swap choice? Related Video: Auto News Buick GM v6 question of the day questions engine swap