2008 Bmw M3 Sedan With Double Clutch, Adult Owned on 2040-cars

Auto blog

BMW celebrates 30 years of M5 with 600-hp super sedan

It's been 30 years since BMW rolled out the first M5, and while displacement and cylinder count may have fluctuated over those past three decades, output has only increased. The first-generation E28 M5 packed a 3.5-liter inline-six with 252 horsepower and 243 lb-ft of torque. The second-gen E34 model that followed added an extra 100 cc (and later 200 more) to produce 310 hp and 266 lb-ft. The E39 followed with a 4.9-liter V8 churning out 394 hp and 369 lb-ft, replaced by the award-winning 5.0-liter V10 in the E60 with its 500 hp and 380 lb-ft before BMW rolled out the latest model with a 4.4-liter V8, its twin turbos making up for the two dropped cylinders and 600 cc of displacement to produce 560 hp and 502 lb-ft of torque. But even that's being left in the dust by the new special edition you see here.
The 30th Anniversary Edition BMW M5 packs that same 4.4-liter twin-turbo V8, but cranks the output up to a nice, round 600 horsepower and a solid 516 lb-ft of torque to go with it. That makes it more powerful, not only than any M5 that's come before it, but also any of its rivals. The Jaguar XFR-S and Audi RS6 Avant (the latter only available as a wagon and not in North America) both lag behind this ultimate of Ultimate Driving Machines; only the Mercedes-Benz E63 AMG trumps it on torque (but not on power), with 531 lb-ft in stock form and 590 in the S-Model.
As a result, the 0-60 time drops from a quoted 4.2 seconds in the stock M5 to a scant 3.7 in the 30th Anniversary edition (just one tick behind that twistier E63 S). The special M5 also comes with the Competition Package as standard, as well as a dedicated control module for the Active M Differential, a special Frozen Dark Silver matte finish, 20-inch alloys and black chrome badges. Special badges abound inside as well, where you'll also find black leather and Alcantara upholstery and aluminum trim. There'll even be a dedicated one-day course offered to owners at The Thermal Club in Palm Springs, CA, to further sweeten the deal.

Watch the BMW i8 get wrung out on the Ring

Been wondering where the heck the reviews of the all-new, plug-in-hybrid BMW i8 have been? After all, the car isn't exactly new, having debuted in concept form way back in September of 2009. In August of last year, we even tested a prototype of the new supercar. Despite that, though, we still haven't gotten a crack at the actual vehicle that will be sold to the public.
Well, we're happy to tell you that we're currently testing the i8 and will have a proper review for you soon. If, however, you're just aching for some coverage of the low-slung plug-in, we have a short video of it in action around Germany's famed Nürburgring.
Despite it's three-cylinder, turbocharged gas engine, the i8 sounds pretty angry as it laps the Ring. That is, until it has a little bit of a breakdown. According to the guys that caught the car on video, it appeared the i8 had a minor brake issue, and was parked on the side of the track for a good 15 minutes, with the driver pumping the brakes. We should probably just take this as proof, then, that manufacturers are actually using the Ring for testing, and not just messing about.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.