Blog

Audi workers are frustrated with 'disastrous' indecisiveness of top management

FRANKFURT (Reuters) - Audi's management board, including Chief Executive Rupert Stadler, has been sharply criticized by company managers, Bild am Sonntag reported on Sunday, citing an internal dossier. It said the executive board had shown no signals of a fresh start, change or readiness for the future, and that workers were frustrated with "disastrous" indecisiveness. Stadler has come under fire for how he has handled the fallout from parent company Volkswagen's diesel emissions scandal. Munich prosecutors have been investigating Audi on suspicion of fraud and criminal advertising in the United States, where the Volkswagen scandal broke in September 2015. Stadler only got a five-year contract extension last month because of an agreement among supervisory board members that he would not serve out his full term, two sources close to the company's supervisory board have told Reuters. An Audi spokesman said: "We deny plans to get rid of Stadler," adding that he declined to comment on the content of the dossier. Volkswagen is looking at rehiring the chief executive of General Motors' Opel, possibly to lead Audi, a source familiar with the matter told Reuters this month, following his resignation from Opel. Bild am Sonntag also quoted Oliver Blume, the head of Porsche, Volkswagen's sportscar division, as saying he had no interest in replacing Stadler. "I have a dream job and am very happy at Porsche. Nothing else comes into question for me." (Reporting by Georgina Prodhan; Editing by Nick Zieminski) Related Video:

FCA registers 'Cuda' trademark, but we wouldn't get our hopes up

It seems Chrysler has submitted a trademark with the US Patent and Trademark Office for the name "Cuda," as first reported by Motor1. Fans of Mopar will instantly recognize this as the abbreviated name of Plymouth's classic Barracuda muscle car, which occasionally bared the shortened nomenclature. Though this might seem like a sign that FCA is considering a revival of the beloved machine, we wouldn't get our hopes up. See, rumors of a 'Cuda or Barracuda revival have circulated pretty much since the moment Dodge showed the modern Challenger and when it went on sale. And some of those rumors have involved the re-registering of the 'Cuda trademark, even as far back as 2010. Over the years, each rumor died a quiet death as time went on and no 'Cudas appeared on dealer lots. There is one rumor that's recent enough to still have a slim chance of realization, circa 2015 to be exact. It predicts a smaller Challenger-based car called Barracuda that could appear as a Dodge in both coupe and drop-top versions. However, we doubt it will come true, since FCA doesn't exactly have a large development budget, and we're not sure what the company would have to gain by making another sports car to sell below the Challenger. Odds are, it would cannibalize sales from the older, completely developed, and thus more profitable Challenger. Really, this trademark filing is probably just a defensive move for Chrysler. It will ensure that no one else can slip in and snag the name for their own vehicle. It should also help ensure that Chrysler has the rights to use the name on other products such as memorabilia. Sorry to crush your dreams. Related Video: News Source: US Patent and Trademark Office via Motor1Image Credit: Chrysler Rumormill Chrysler Dodge Coupe Performance hemi cuda

2017 Audi A4: Allroad vs. sedan: We explain the differences

We're rotating 2017 Audi A4 models through our long-term fleet. First came the sedan, followed by the Allroad. They briefly overlapped in our garage. The Allroad is a slightly lifted 'estate' version of the sedan, but the differences go beyond that. We go into great depth in the video above. As you'll discover, there are small tweaks to the trim and styling, and larger changes involving the cargo space and pricing. Michael Austin and John Beltz Snyder explain it. Still need more info? Dive into all the A4 details using our comparison tool. Audi Long-Term Garage Crossover Wagon Luxury Videos Sedan

2018 Subaru Legacy starts at $23,055, Outback at $26,810

The midsize Subaru Legacy and Outback get a host of new updates for 2018. Both models get revised styling inside and out. Additionally, both models get some new standard features and revised suspension with the promise of improved ride and handling. As always, both come standard with all-wheel drive. The refreshed 2018 Subaru Legacy starts at $23,055 while a 2018 Subaru Outback will set you back at least $26,810, a bump of under $300 versus the outgoing models. Of course, both cars can be loaded up with a host of features and equipment. There are two engines available for each model, a 175 horsepower 2.5-liter flat four and a 256 horsepower 3.6-liter flat six. In the US, the only available transmission is a respectable but uninspiring CVT. Stepping up to the bigger engine isn't cheap. The top of the line Legacy 3.6R Limited starts at $32,805. The Outback 3.6R Limited starts at $36,310. There's a $39,605 Outback 3.6R Touring on top of that. Standard features on the base model are few, but moving up the range allows shoppers to add a number of features like Subaru's EyeSight safety suite, an 8-inch infotainment system, heated seats, mirrors, and windshield wipers, Bluetooth audio, LED lighting, and more. As the Outback is essentially a lifted Legacy wagon, standard features and trim levels generally mirror each other. Despite the rise of the crossover, the midsize sedan segment is still hugely popular and extremely cutthroat. The refreshed Legacy is right in the mix with the Toyota Camry, Honda Accord, Chevy Malibu, and the like with just hundreds of dollars separating the cars. The Outback is a bit harder to compare, as it's not quite a wagon but not quite a crossover. It's more expensive than most two-row crossovers like the Honda CR-V and Mazda CX-5, but offers more interior and cargo space. If you don't need a third row, the Outback undercuts models like the Chevrolet Traverse, Honda Pilot, Nissan Pathfinder, and Dodge Durango. Both the 2018 Subaru Legacy and Outback should go on sale later this year. Related Video: News Source: Subaru Subaru Crossover Wagon Sedan

Living up to its name | 2018 Ferrari 812 Superfast First Drive

What's in a name? In the case of the Ferrari 812 Superfast, a numerical reference to its 800-(metric) horsepower, 12-cylinder engine and a not-so-subtle hint at its capability for extreme rates of travel. Only Ferrari, notorious for joyously naming its flagship "LaFerrari," could get away with the moniker. But once you get past the super-obvious nomenclature, it becomes hard to argue with this on-the-nose model name. If you're lucky enough to have sampled the standard F12 and one of the 799 F12 TDFs offered to Ferrari's most loyal clients, you've got a pretty good idea of the 812 Superfast's personality, which involves a blend of the TDF's edginess and the F12's comfort and usability. Even within the rarified world of supercars, the 812's athleticism is impressive despite its veil of approachability. More power, to the tune of 789 horsepower (versus the TDF's 769) combined with weight loss of 132 pounds make it the highest-performance standard production model Ferrari in history. (For reference, the TDF trims an even more impressive 242 pounds, ditching niceties like sound insulation.) Along with mechanical and aerodynamic improvements, the elevated power-to-weight ratio enables it to hit 60 mph in 2.8 seconds and reach a top speed of 211 mph. The main attraction is, of course, the 6.5-liter V12, which boasts 75 percent new parts and undergoes a series of mods to raise its output while (thankfully) retaining its naturally aspirated soul. A stroked version of the F12's 6.3-liter mill, the V12 features new pistons, new con-rods, a reinforced crankcase, and a trick new direct-fuel-injection system that runs at a staggering 5,076 psi. The system is capable of changing the shape of fuel droplets as they're injected into the combustion chamber, adjusting for around-town drivability or balls-to-the-wall performance. A revised air intake system incorporates a new plenum and bigger air inlet with wider throttle valves for better breathing. Silver lining: CO2 emissions have been reduced thanks to the new injection system and reduced friction from new 5W50 engine oil. Each of the seven-speed dual-clutch transmission's gears has been shortened, which has the virtual effect of producing an extra 50 horsepower – as if the mighty V12 was wanting for oomph. Upshifts can now happen 30 percent quicker, and the engine's ability to rev-match for downshifts occurs 40 percent faster.

Sell your own: 2006 Hummer H3

This is part of an occasional look at cars for sale in Autoblog's classifieds. Want to sell your car? We make it easy and free. Quickly create listings with up to six photos and reach millions of buyers. Log in and create your free listings. At the time of the Hummer launch in 1992, America's mood was pretty good, we'd pushed Iraq out of Kuwait, and the economy headed for an uptick. It may not have been the best of times, but it was the perfect time to introduce a thirsty, in-your-face SUV. Regrettably, in the following decade we suffered 9/11, were waging two wars, and then the economic downturn struck. And despite the relative sanity offered by the smaller H3, GM entered into Chapter 11 in 2009 and killed off Hummer. With relatively few sold in the five model years it was offered, finding a clean H3 is a challenge. We like the H3's smaller footprint - relative to the huge H1 and Tahoe-based H2 - and the quirkiness of an inline 5-cylinder matched to a 5-speed manual. With this for-sale example, offered in Arkansas, you'll find mileage perfectly reasonable for a vehicle now 12 years old, and it looks clean. Despite its ruggedness, we'd get a pre-purchase inspection and negotiate on an asking price significantly above book. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Hummer Used Car Buying Ownership SUV Off-Road Vehicles

Junkyard Gem: 1982 Subaru BRAT

Like the AMC Eagle, the Subaru BRAT was a big sales hit in Colorado, much more than in the rest of North America, and you still see plenty of examples of both vehicles on Colorado streets ... and in Colorado wrecking yards. Here's a 1982 BRAT with camper shell that made it to age 35 before being forcibly retired. Based on the Subaru Leone (which was sold in the United States as "The Subaru"), the BRAT was a lightweight, four-wheel-drive truck that could slog through mud and snow, but didn't slurp gas quite as hard as other 4WD trucks. They rusted instantly in the Midwest and Northeast, but held together pretty well in the West. This one has the "Twin-Halo" sunroof setup. How much power do you need in a pickup? In 1982, 72 horses, from this 1,781cc boxer-four engine, were enough for BRAT buyers. Subaru evaded paying the Chicken Tax on early BRATs by installing jumpseats in the bed, which (legally speaking) made the BRAT a four-seat passenger car; like most BRATs that end up in junkyards, the jumpseats are long gone from this one. Many personal-injury lawsuits later, the jumpseats were nixed and BRAT buyers had to pay the tax. Note the Subaru-owner-stereotype-defying bumper stickers on the back window. It's faded and bent and worn out, but will provide parts for the many BRATs (and Leones) still roaming Colorado streets and trails. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In Australia, this truck was called the Brumby. Happy with the ride, Porky? This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the United States, Ruth Gordon pitched the BRAT. Related Video: Featured Gallery Junked 1982 Subaru BRAT View 14 Photos Auto News Subaru Automotive History Truck subaru brat

Audi A8's active suspension will even protect you in a crash

Audi has revealed yet another system of the upcoming Audi A8 that uses the car's 48-volt electrical system. In addition to a fancy stop-start function, the A8 will have a suspension that can be actuated by electric motors. At each corner of the car is a separate motor connected to an arm that can press down or pull up on the suspension. These motors are controlled by a computer that monitors the road with a camera to determine how the motors should react to improve ride quality and handling. In the instance of some kind of bump or other road imperfection, the car can actively raise the wheel that would go over that bump, to prevent it from upsetting the ride. When going through a corner, the car can direct the motors on the outside to push up to reduce lean, and the motors on the inside to push down to keep the tires pressed to the road. The system can also help keep the car level when stopping and starting. There's yet one more feature of the suspension that is rather interesting. In the event the car detects an impending side-impact crash, it can raise up the side that will be hit, to protect the occupants. By raising up that side, the car increases the chance that more of the energy from the impact will be absorbed by the side rails and floor, which are stronger than the doors and pillars. This nifty new suspension, and the aforementioned start-stop system, will be found on the next-generation Audi A8, which will be officially revealed on July 11. If you can't wait for that, apparently the car has a cameo in Spider-Man: Homecoming, which hits theaters on June 28. Related Video: Image Credit: Audi Audi Technology Emerging Technologies Luxury Videos Sedan 48-volt system

For thousands of US auto workers, the downturn is already here

LORDSTOWN, Ohio - Wall Street is fretting that the auto industry is heading for a downturn, but for thousands of workers at General Motors factories in the United States, the hard times are already here. Matt Streb, 36, was one of 1,200 workers laid off on Jan. 20 - inauguration day for President Donald Trump - when GM canceled the third shift at its Lordstown small-car factory here. Sales of the Chevrolet Cruze sedan, the only vehicle the plant makes, have nosedived as consumers switch to SUVs and pickup trucks. Streb is looking for another job, but employers are wary because they assume he will quit whenever GM calls him back. "I get it," said Streb, who has a degree in communications, "but it's frustrating." Layoffs at Lordstown and other auto plants point to a broader challenge for the economy in Midwestern manufacturing states and for the Trump administration. "This is about economics, not what Trump says. Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." The auto industry's boom from 2010 through last year was a major driver for manufacturing job creation. The fading of that boom threatens prospects for US industrial output and job creation that were central to Trump's victory in Ohio and other manufacturing states. "This is about economics, not what Trump says," said Robert Morales, president of United Auto Workers (UAW) union Local 1714, which represents workers at GM's stamping plant at Lordstown. "Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." Last week the Federal Reserve said factory output fell 0.4 percent in May, the second decline in three months, due partly to a 2 percent drop in motor vehicles and parts production. Mark Muro, a senior fellow at the Brookings Institution, has compiled data from government sources that show the auto industry punching higher than its weight in job creation in recent years - accounting for between 60 percent and 80 percent of all US manufacturing jobs added in 2015 and 2016. In the first quarter of this year, the auto industry accounted for less than 2 percent of the 45,000 manufacturing jobs created. "There's no argument with the idea that auto has been pulling the manufacturing sled up the mountain for the last three or four years," Muro said.

Nissan-Renault and game developer plan driverless ride-hailing

TOKYO - The Nissan and Renault alliance plans to launch driverless ride-hailing and ride-sharing services in coming years, as the automakers look beyond making and selling cars to survive an industry being quickly transformed by new services. Automakers are leveraging expertise in automated driving functions for mass-market cars to develop mobility services, as they compete with tech firms such as Alphabet Inc and Uber in the fast-growing "pay-per-ride" market which threatens to hit demand for car ownership. Ogi Redzic, head of Nissan-Renault's Connected Vehicles and Mobility Services division, said the alliance would begin self-driving services based on its electric cars "certainly within 10 years," though not likely before 2020. "We think that the big opportunity for us is in automation, electric vehicles and ride-sharing and hailing together," Redzic said in an interview on Thursday. Nissan and Renault join a small group of automakers aiming to enter the ride-hailing market, which Goldman Sachs last month estimated would grow eightfold by 2030 to be five times the size of the taxi market. Redzic said the Japanese and French partners were testing self-driving vehicles, and that any service would run on pre-mapped courses with predetermined pick-up and drop-off points. The two automakers are developing the system with Japanese game software maker DeNA Co Ltd and French public transport operator Transdev SA. German rival BMW AG is also testing autonomous vehicles for use in ride-hailing services, while Uber has been developing self-driving technology. U.S. tech firm nuTonomy Inc and ride services company Lyft Inc, which counts General Motors Co as a major shareholder, this month announced they would begin piloting an autonomous vehicle ride-hailing service in Boston. Redzic said to market a self-driving service, regulations need to change to allow driverless cars on roads. At the moment, most global jurisdictions do not expressly authorise vehicles to operate on regular roads without a driver. "It doesn't just depend on us," he said. "To become fully driverless you need laws to change." Reporting by Naomi TajitsuRelated Video:

Kia Motors again tops J.D. Power Initial Quality Study

Image Credit: J.D. Power charts Auto News Plants/Manufacturing Hyundai Kia study JD Power

A brief taste of Korea's latest dish | 2018 Hyundai Kona

Disclaimer: We were limited to a short 10-minute drive at Hyundai's research and development facility in Namyang, about a 90-minute drive from the South Korean Capital of Seoul. The closed loop didn't provide much in the way of road variation, and we reached a blistering top speed of 45 mph with all of three opportunities to use the brakes. The Kona we drove was a Korean-spec model. Suspension and steering tuning will be adjusted for the US, though we couldn't get a clear answer on what sort of changes that entails. Expect the US model to be a bit softer than what the Koreans and the Europeans will see, though we'll have to wait until a full first drive to be sure. Hyundai has been on a roll lately, releasing a series of solid if not exactly groundbreaking products, though until now they company was missing an entry into the ever-burgeoning B-segment crossover. For several years, compacts like the Honda HR-V and Mazda CX-3 have ruled the class, but Hyundai is going all-in on crossovers, with several new models on the horizon. The first one out of the gate is the Kona. In the next few years, we'll see a model that slots below the Kona and a large SUV that will sit above the Santa Fe. We got our first look at the new model at Hyundai's new Motorstudio, a place that's half interactive museum and half high-end conference space. The Kona's styling, a mix of original and derivative design elements, is sure to be divisive. The most standout feature is the plastic cladding that comes in either black or grey, depending on the body color. Hyundai is calling it armor. We just hope it's affordable to replace. The front wears Hyundai's cascading grille, an element that's making it's way across the automaker's lineup. It's flanked by what Hyundai is calling is calling composite headlights. It's a split design that places the slit-like turn signals above and separate from the actual headlights. It looks very similar to the current Jeep Cherokee, odd considering the controversy that model caused a few years ago. There's also a bit of Nissan Juke in there, though substantially toned down. You best get used to it, though, as design chief Luc Donckerwolke says it's the new face of the brand. Expect to see some variation making its way across the automaker's lineup. Not so with the rest of the Kona, as Donckerwolke said each model will get unique elements only found on that particular car. For the Kona, it's the armor.

Hyundai Veloster N spied hard at work at the Nurburgring

The first vehicle from Hyundai's N performance division, the i30 hatchback, is coming later this year. Sadly, that handsome little five door isn't bound for the US. While the Korean automaker won't confirm what will be coming to America in 2018, we're almost positive that the first model will be the next-gen Veloster. The car is well into development, and we now have some new photos of a shakedown at the Nurburgring. Pure facts are scarce, but based on what we know about the i30 we can make some educated guesses about the Veloster. The car will be powered by a 2.0-liter turbocharged inline-four making either about 250 horsepower or 280 with an optional performance pack. Power will be sent to the front wheels through a six-speed manual, though Hyundai hasn't ruled out a dual-clutch transmission for the future. Look for big wheels with sticky summer rubber to surround beefy Brembo brakes. Although every Veloster we've seen both in photos and in person has been covered with a decent amount of camouflage, we can see the car's basic outline. The car will still feature an asymmetrical door layout, with one on the driver's side and two on the passenger side. The large grille is now shaped like the corporate cascading grille. It's styled like a flat-bottomed version of Superman's "S" logo. While the standard and Turbo models will feature center-exit exhaust tips, the Veloster N pushes the exhaust to the corners of the bumper. Pricing and performance numbers haven't been revealed, but Hyundai is gunning straight for the Volkswagen GTI. In typical Hyundai fashion, it's likely to undercut the competition by a hair or two. Look for prices in the mid $20,000s when the Veloster N arrives next year. Expect a full reveal sometime this fall. Related Video: Featured Gallery 2018 Hyundai Veloster N spy shots Image Credit: Spied Bilde Design/Style Spy Photos Hyundai Hatchback Performance hyundai veloster turbo Hyundai N hyundai veloster n

Jaguar teases E-Pace crossover details - and price under $40K

So it turns out we'll be seeing the fully revealed Jaguar E-Pace much sooner than we expected. Jaguar announced the debut will occur on July 13, so we're less than a month away. The company also provided a teaser of the E-Pace's tail. It shows a fat rear fender and Jaguar's trademark taillight design. While many other companies would be content to release a teaser and nothing else, Jaguar actually provided a number of other interesting details. Among them is the powertrain. It will only be available with gasoline-powered engines and all-wheel drive. We're expecting it to use roughly the same powertrain combinations as the Land Rover Range Rover Evoque. The other big details are pricing and availability. The baby Jaguar SUV starts at $39,595, which is over $3,000 less than the entry-level F-Pace and the Range Rover Evoque. You'll also be able to bring one home from the dealer next year. Related Video: Image Credit: Jaguar Jaguar Crossover SUV Luxury jaguar e-pace

How Dodge is making sure dealers don't gouge Demon buyers

The Dodge Challenger SRT Demon is a ridiculous 840-horsepower, limited-production machine that we're sure many are eager to purchase. But, they're probably not excited at the prospect of the massive dealer markups that accompany rare, high-performance cars. Fortunately, Dodge is taking steps to make sure buyers aren't paying thousands of dollars extra to get a car early, and its main method is production priority. Dodge announced that cars purchased at or below the MSRP of $86,090 will be the first ones the company builds and delivers. If a dealer sells an allocated car for more than the sticker price, that car won't be built until the high-priority vehicles have been. Dodge will also ensure fair distribution of the 3,000 Demons it will build by limiting the number of orders a dealer can submit. Dealers will be allocated a certain number of cars, and the amount will be based on how many Challenger and Charger Hellcats the dealer has sold. This should also help prevent dealers from hoarding cars and slapping sky-high prices on them. Also, the fact that every Demon comes with a number plate with the buyers' name on it should help prevent dealers from buying cars for the lot to mark up. In addition to revealing these measures, Dodge announced that buyers will be able to submit an order for a Demon at an eligible dealer tomorrow, June 21. The only dealers eligible for Demon ordering are those that have sold more than one Hellcat in the past 12 months. Cars will begin production this summer, and deliveries will begin in the fall. Related Video: Featured Gallery 2018 Dodge Challenger SRT Demon: New York 2017 View 48 Photos Image Credit: Drew Phillips Dodge Car Buying Car Dealers Coupe Performance dodge demon

Almost Jeffersonian | 2017 Kia Optima Plug-In Hybrid Second Drive

On a drive of Kia's new Optima Plug-In Hybrid (in showrooms since April), we visited Thomas Jefferson's Monticello, our third president's sprawling estate in central Virginia. Even in the absence of Twitter, Jefferson enjoyed a restless curiosity about an array of subjects. While his day gigs – declaring independence and consummating the Louisiana Purchase – occupied much of his life, he always made time for intellectual pursuits and making daily life better, so we think he'd grasp the rightness of the Optima. In the science of the plug-in hybrid, there's little new. The combination of gas and electric motors is intended to reduce the carbon footprint of a conventional drivetrain. Add a motor, install more battery capacity and enable that battery to be recharged over a long lunch or overnight, and you have a plug-in hybrid with up to 29 miles of electric-only operation. With the gas tank included, you get roughly 600 miles of combined driving range. (That's DC to Atlanta, had Jefferson wanted to visit Atlanta.) Visually, there's little to distinguish this PHEV from a conventional Optima. Its alloy wheels are aerodynamically cleaner and front fascia less disruptive - and includes an active air flap, no less. The exterior design, though dated, still impresses. A spacious interior is what you'd expect from Kia. And so, regrettably, are some hard plastic surfaces. That plastic is appropriate in a $20,000 Soul, less so in a $40,000 Optima Plug-In. Nothing here is completely off-putting, and we've always liked Kia's integration of audio and A/C controls. But so much is good about the Optima that you expect something nicer as you slide behind the wheel. The front seats are both supportive and accessible. Our test vehicle, equipped with $5,250 of EX Technology, offered a panoramic sunroof, heated and ventilated front seats, a power front passenger seat with adjustable lumbar, and heated outboard rear seats. That same package also includes a bundle of safety technology, including a forward collision warning system, advanced smart cruise control, blind spot detection, lane departure warning, and rear cross traffic alert. A modern hybrid generates a lot of info, and learning to access it all will require more than the few hours we had in the car. Your economy – the Optima's innate efficiency and your driving style – is available at the push (or two) of a button. And you can choose from all-electric EV or hybrid mode by using Kia's Mode Select control.

2018 Jaguar E-Pace (almost) revealed in new spy photos

Each time we've seen the Jaguar E-Pace out testing, it has been covered in a variety of fake plastic body parts to obscure the actual body. Finally, Jaguar relaxed its camouflage campaign, giving us the chance to see the car's bodywork almost entirely exposed. The only disguise this car was wearing was a form-fitting vinyl wrap. The test car in question confirms a number of our suspicions. The rear hatch is, indeed, extremely raked, which gives the vehicle a sportier look, though will surely reduce cargo capacity. If this crossover was coming from one of the German automakers, they would probably call this a "coupe." The front and rear fenders are also rather exaggerated, and the rear haunches are accented by a rising window line that ends in a pinched-off quarter window. The nose and tail of the crossover are pretty standard Jaguar. The layout of the lights and grilles are generally what you would find on its big brother, the F-Pace. The headlights appear to have some sort of LED arrangement as there are no clearly defined projector or reflector elements. Of course, there's no guarantee that these lights will be used across the line-up. They may just be a feature on higher trim levels. Now that we've also seen the car with so few covers and with production-ready sheet metal, we now expect to see the E-Pace fully revealed in person very soon, probably by the end of the year. It will likely be a 2018 model, and may share engines and drivetrains with the Land Rover Range Rover Evoque, since the body shape matches that of a vehicle with a transverse mounted engine. Related Video: Featured Gallery Jaguar E-Pace Spy Shots View 30 Photos Image Credit: KGP Photography Spy Photos Jaguar Crossover SUV Luxury jaguar e-pace

Kia finally unveils the all-new Stonic compact crossover

About a week after the global debut of the all-new Hyundai Kona compact crossover, sister company Kia rolls out its own B-segment fighter, the stylish Stonic. The two new models are going up against crossovers like the Honda HR-V, Toyota C-HR, Mazda CX-3, Nissan Juke, and Fiat 500X. This is a segment that's big on both style and practicality, and at first glance the Stonic fits both bills. We'll have to wait until this fall to get our hands on it. The Stonic is a handsome car, but its design isn't as bold as something like the Kona or the C-HR. The fascia looks like an updated version of the Kia Soul rather than a shrunken Sportage. The big rectangular eyes flank the corporate tiger nose grille, with a large lower air dam that hides the hardware for the active safety equipment. The profile once again eschews any ties to the Sportage, with hard character lines and a new C-pillar design. There is plastic cladding around the wheel wells and along the rocker panel. Like the Kona, the Stonic is available with a two-tone roof, but rather than being locked into a single color, the Stonic will offer five. That means there's a total of 20 paint combinations. Unlike the rest of the car, the rear of the Stonic pulls from other Kia SUVs. The taillights feature U-shaped LEDs, though there isn't a bod-width reflector like on the Sportage. There's a decent-sized rear spoiler and a faux skid plate on the bottom of the bumper. The hatch doesn't have a flat bottom, so we're curious if this will narrow the opening to the cargo area. The interior carries over the corporate design, with large, easy-to-reach buttons and knobs and large, clear gauges. There are body-colored accents on the dash, the console, and even the stitching on the seats. It's a simple way to brighten a dark cabin. The Stonic will get Apple CarPlay and Android Auto and will be available with heated front seats and keyless entry and ignition. All we have right now are details for the European model, so it's unclear what engines will make it to the US. Look for both the 147-horsepower 2.0-liter four-cylinder and the 175-horsepower turbocharged 1.6-liter four-cylinder to make an appearance. Both engines can be found in the Kona, paired to a six-speed automatic and a seven-speed dual-clutch transmission, respectively.

Next Hyundai Santa Fe carries Kona cues

Last week we showed you Hyundai's newest and smallest crossover, the Kona. This week, we bring you the newest version of Hyundai's largest crossover, the Santa Fe, albeit beneath much camouflage. There's a bigger connection between these two vehicles than just timing and size contrast, though. They appear to share some styling cues. We can see through the vinyl draperies on the nose and tell that it has an aggressive version of the Hyundai cascading grille, much like the Kona. It also has the slender top headlight element combined with larger, separate elements lower in the fascia, again like the little crossover. The camouflage also fits closely enough to the body to reveal that the main grille will be flanked by large vents that encompass the lower headlamps. We also see some Recaro racing seats through the windshield, but we doubt those will make production. Prove us wrong, Hyundai! Moving to the sides and tail, there are fewer details to discern. The size looks similar to the current model, and the roofline and window lines also look similar. The rear taillights do look slimmer than those on the present Santa Fe. As for when we may see this updated Santa Fe, we wouldn't expect a reveal until next spring at the earliest, possibly next fall, as a 2019 model. The reason for this is primarily the fact that the current Santa Fe was just refreshed for 2017, so Hyundai will likely give that update a little bit of breathing room. Related Video: Featured Gallery 2019 Hyundai Santa Fe Spy Shots View 10 Photos Image Credit: CarPix Spy Photos Hyundai Crossover Economy Cars hyundai santa fe

2018 Cadillac XTS does its best CT6 impression

Although the Cadillac sedan lineup almost exclusively consists of rear-drive sedans, one last bastion of the old front-drive Caddy exists in the XTS. And it looks like the old-school XTS isn't going anywhere, since it just got a refresh that makes it look more like the CT6 and the CTS. This of course is a bit ironic considering the fact that the CT6 will look different in the near future. Until then, though, this update does make the XTS look more up-to-date. The main part of the headlights end higher up on the front fascia, while a strip of LED accent lights waterfall down the front bumper. The grille has slightly more sculpted slats, and the front badge has been scaled down a bit. There are no longer creases that unify the main grille and the lower one in the bumper, which help the car appear lower and wider than the outgoing model. At the back, the license plate position has been moved down to the bumper, and the trunk lid has more lines and creases. The taillights now have horizontal elements that extend toward the middle of the car. The exhaust finishers and the reverse light also look larger and more prominent now. The refreshed XTS also brings a couple of new trim options. There are new wheel designs both in 19- and 20-inch sizes. Inside, XTS buyers will be able to choose from three new color and upholstery combinations. Two of them, however, are exclusive to the Platinum trim level and come with semi-aniline leather seats. There's not really anything new mechanically with the 2018 XTS. The only major change seems to be a new tire design that is quieter and provides a smoother ride. Otherwise, the XTS will remain available with either the standard 3.6-liter V6 making 304 horsepower, or the optional 410-horsepower twin-turbocharged 3.6-liter V6 in the V-Sport model. The standard engine comes with either front-wheel drive or all-wheel drive, and the V-Sport is only available with all-wheel drive. Pricing has yet to be released for the 2018 model year. Related Video: Featured Gallery 2018 Cadillac XTS Image Credit: Cadillac Cadillac Luxury Sedan cadillac xts

FCA denies report it's pulling Chrysler brand from Japan

TOKYO - Fiat Chrysler Automobiles denied it had decided to pull the plug on the Chrysler brand in Japan, after local media reported it was planning to stop selling the US cars in the country as early as next year following years of poor sales. "Although FCA Japan has already announced its intention to concentrate its resources on the Jeep brand ahead, no decisions have been made regarding (the) Chrysler brand," the automaker said ion Monday. The Nikkei business daily reported that the European-US automaker, which also sells the Jeep, Fiat, Alfa Romeo, and Abarth brands in Japan, was close to deciding to throw in the towel on the Chrysler brand, which posted sales of less than 300 vehicles in 2016, having fallen steadily since around 2000 and are about a tenth of what they were a decade ago. FCA sells only one Chrysler model in Japan, the full-size 300s sedan, which is sold at the company's Jeep dealerships. FCA's Fiat brand, which includes smaller models, and its Jeep brand have been growing in the country. Last year they sold around 6,700 and 9,400 units, respectively, making them top 10-selling foreign branded vehicles in the Japanese market. However, foreign cars constitute a small portion of the total Japanese auto market, which is dominated by domestic brands. Last year, 295,000 foreign-branded new cars were sold in the country, roughly one-tenth of total new vehicle sales. Reporting by Naomi TajitsuRelated Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2017 Chrysler 300S Sport Appearance Package: New York 2016 View 12 Photos Auto News Chrysler Fiat Jeep Sedan FCA

EPA suspected Fiat Chrysler of using 'defeat device' in 2015

U.S. regulators told Fiat Chrysler Automobiles in November 2015 that they suspected some of the automaker's vehicles were equipped with secret software allowing them to violate emission control standards, according to emails disclosed on Friday. The U.S. Environmental Protection Agency and California Air Resources Board accused Fiat Chrysler in January of using the software, known as a "defeat device," to illegally allow excess diesel emissions in 104,000 Jeep Grand Cherokees and Dodge Ram 1500 trucks built between 2014 and 2016. Byron Bunker, director of the EPA's Transportation and Air Quality compliance division, said in a January 2016 email to Fiat Chrysler, obtained by Reuters under the Freedom of Information Act, that he was "very concerned about the unacceptably slow pace" of the automaker's efforts to explain high nitrogen oxide emissions from some of its vehicles. Nitrogen oxide is linked to smog formation and respiratory problems. Bunker's email said the EPA had told Fiat Chrysler officials at a November 2015 meeting that at least one auxiliary emissions control device on the car maker's vehicles appeared to violate the agency's regulations. Mike Dahl, head of vehicle safety and regulatory compliance for Fiat Chrysler's U.S. unit, responded in a separate email that the company was working diligently and understood the EPA's concerns. He added that if the EPA identified Fiat Chrysler vehicles as containing defeat devices it would result in "potentially significant regulatory and commercial consequences." The documents redacted the vehicles named, but two officials briefed on the matter said they referred to diesel models. The EPA's November 2015 meeting with Fiat Chrysler came two months after Volkswagen AG, mired in a major tailpipe emissions scandal, admitted to installing secret defeat device software in hundreds of thousands of U.S. diesel cars to make them appear cleaner than they were on the road.

Infiniti QX60 AWD vs. Mazda CX-9 Signature

In certain ZIP codes around Dallas, Chevy's Suburban remains the Official SUV of Texas, but Infiniti's QX60 could be the Official Crossover. The Pathfinder-based three-row is everywhere. And while its popularity is based on transporting kids and their stuff, the QX60 is a more urban Suburban. Mazda's CX-9 is not as ubiquitous as the QX60 in McMansion driveways, but it has been making inroads into the near-luxury segment with its near-luxury spec. The CX-9's second generation has obviously upscale intent, in the sheetmetal and throughout the top-line Signature interior. And the prices of these two cars are surprisingly close. INFINITI QX60 AWD: The sheetmetal differentiating Infiniti's QX60 from its volume-oriented Nissan donor is attractive. The changes are subtle, and in profile the Pathfinder and Infiniti are almost identical, but the eye is drawn to the differences in the grille and D-pillar. The Infiniti has a luxury vibe with a more athletic stance. The QX60's interior surfaces seem upscale, but if you want wood it will cost you. In "building our own" and opting for graphite leather with maple trim, the wood requires another $12,000(!) of mandatory packages, including Infiniti's Premium and Premium Plus packages ($1,800 and $2,900, respectively) and $7,300 of Deluxe Tech. So, wood? We wouldn't. But if you do, know the QX60 won't match the larger QX80 in presence or passion, but it is certainly something beyond a rebadged Pathfinder. For you and your passengers, there is 156 cubic feet of interior room; with the second and third rows folded, you can accommodate 76 cubic feet of cargo. Like in most crossovers, that third row is best used by young kids, but taking six adults to lunch won't require too much gymnastics – or chiropractics. On the road, the QX60 is known more for comfort than composure; this isn't an old Buick, but neither is it a BMW. Nissan's 3.5 liter V6 produces generous power (295 horsepower and 270 pound-feet of torque), but it's transmitted to either the front wheels or all wheels via a CVT (continuously variable transmission). Nissan has tried to mitigate the quirkiness, but it's a CVT all the same. At a well-equipped base of $44,000, we like the QX60. But start adding options, and you can approach $60,000, which is real money even in the better ZIP codes. MAZDA CX-9 SIGNATURE: This, ladies and gentlemen, is dramatic. Mazda has absolutely nailed it. Using Mazda's KODO design language on a large platform could have gone wrong.

Jaguar E-Pace has an F-Type-inspired interior

Jaguar continues to test its new small crossover, tentatively dubbed E-Pace, and that means our spy photographers continue to capture it in the wild. This time, we got some photos of the interior. From what we can see, it follows in the footsteps of the the F-Type sports car, rather than Jaguar's sedans and larger F-Pace crossover. From the air vents down, the center stack gently slopes toward the shifter. It also has a large grab handle on the passenger side like that in the F-Type. This also makes the center stack feel more driver-centric. The shifter is also F-Type-inspired. While the Jaguar sedans and the F-Pace use a motorized dial that rises from the center console for shifting, the F-Type uses a conventional lever, as does this E-Pace. These interior design choices seem to indicate that Jaguar will market this E-Pace as being a sportier Jaguar than its existing lineup. Our spy photographer also caught this E-Pace prototype with the hatch up. This clearly shows that the E-Pace will have a radically raked rear window. Matched with the voluptuous rear fenders, the E-Pace should have a very aggressive look. As a side note, the open hatch also reveals that there are at least one or two members of the Jaguar team that like Budweiser. We still expect a reasonably long wait until the E-Pace makes its full debut, likely sometime next year at the earliest. We're also expecting the crossover to have a front-wheel-drive-based all-wheel-drive system like the Range Rover Evoque, and it may even use the Evoque platform. While not a bad platform or drive system, most any car enthusiast or journalist would agree that a rear-wheel drive platform would be more naturally sporty and in keeping with this car's interior and possible marketing. Related Video:

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

Scuderia Corsa ready to recapture glory at Le Mans

There's nothing else in this world like endurance car racing. Be it a relatively short race like the 6 Hours of Nurburgring or 24-hour endeavors like Le Mans or Daytona, drivers and cars alike are put through long and grueling racing that either ends in triumph or heartbreak. At this year's Detroit Grand Prix, we had a chance to sit down with Scuderia Corsa drivers Alessandro Balzan and Christina Nielsen just hours before they left for France to participate in first practice for the 24 Hours of Le Mans. Scuderia Corsa competes in the IMSA WeatherTech Sportscar Championship team in the GT Daytona class. This is the second year Balzan and Nielsen have partnered, and the relationship has been fruitful. The pair won the class championship in 2016 and are currently sitting in second for 2017. Despite being in the sport longer, this will be Balzan's first attempt at Le Mans. The pair will be joined by American Bret Curtis in the race, usually racing against Balzan and Nielsen behind the wheel of a BMW. "There's a lot to prepare for with this race," Balzan said. "Christina raced there last year, so she's helping me prepare. It's not like any other race, even something like Daytona. There's a lot of preparation that goes into this race." Everything from food intake to sleep schedules has to be adjusted and set appropriately. There's 24 hours of on-track action bookended by pre-race prep and a post-race cool down. Your body and mind must adjust accordingly, and it's not as simple as drinking a few cups of coffee and munching on an energy bar. Scuderia Corsa is the defending class champion at Le Mans, though not with Nielsen behind the wheel. The team is backed by Ferrari and competes with 488 GT3s, a stripped out, lightweight, race-only version of the 488 GTB. The cars share a version the 3.9-liter turbocharged V8, but the rest of the car has been extensively modified, bearing little resemblance beyond styling. "The cars don't share much with the regular car," Balzan said. The interior is all removed and the suspension and aero are all different. It looks similar, but it's really changed. It drives like a totally different car." That's par for the course with GT cars. While they might share more in common with road cars than something like the Porsche 919 Hybrid prototype, the world of race cars and production cars are far removed. That said, Balzan and Nielsen both enjoy the road car correlation.

First Hyundai N car coming to US in 2018, and we think we know what it is

SEOUL, South Korea - At the worldwide debut for the all-new Hyundai Kona compact crossover in South Korea, a group of journalists was given a sneak peek at Hyundai's new N performance car division. The group, led by Albert Biermann, has been tasked with giving Hyundai a performance image beyond the occasional car like the Genesis coupe or Veloster Turbo. Its first project, the i30 N, is nearly complete. Unfortunately, it's not coming to the US, though we will be getting our very own N car sometime next year. Now, Biermann and Hyundai will not say what that car is, but all signs point to the Veloster. Hyundai won't comment on future products, but we saw at least three distinct versions of the Veloster testing at Namyang during our visit. There was a standard model with center-mounted trapezoidal exhaust tips. There was a turbo-badged model with two round center-mounted exhaust tips. Finally, we saw what is surely the N model. This had a hidden N badge in the grille (in the same place as the i30 Ns that we saw) and exhaust tips that were pushed to the corners of the bumper. We weren't allowed to take photos of anything, but the new Veloster has the same basic asymmetric shape as before, as seen in some spy photos. The interior looks to be similar to the i30, with a floating infotainment display and a clean and simple layout. Unfortunately, most of the exterior was still covered in camouflage. Despite the parade of cars, there was nothing on the exterior that we haven't seen in spy photos. Other details are scarce, but look for the turbo model to retain the 1.6-liter turbocharged inline four, good for at least 200 horsepower. That should give the N model plenty of breathing room. We believe it will get the same engine as the i30 N, meaning a 2.0-liter turbocharged inline-four making at least 250 horsepower, possibly more. While we didn't get a chance to drive the i30 N, the cars made all the right noises when blasting about. According to Biermann, it was the sound of tuned Hondas and Kias blasting about Hyundai's R&D facility that really kicked things off with N. Engineers were buying other cars since there wasn't much on offer. Hyundai wanted to give people cars they could track and tune and be just as fast as the competition. We have high hopes for both the Veloster N and the N division as a whole. Biermann was formerly the vice president of engineering for BMW's M division and was in charge of the development of the M3, M4, and M6.

Lincoln MKC crossover adopts the Continental's grille

The last vestiges of the controversial split Lincoln grille are slowly being removed as the company revamps its lineup. It started with the MKZ and Continental, with the most recent rhinoplasty recipient being the Navigator. Now, based on spy shots, it looks like the MKC crossover will be the fourth to get the new corporate grille. Under the heavy vinyl coverings, we can clearly see the proud Continental-inspired grille. We can also see that it will feature the same chrome mesh with Lincoln badge-shaped openings found on other cars with the grille design. We can also assume that the headlights will receive a substantial refresh, but the lower bumper doesn't look particularly different. The rest of this prototype MKC looks the same as the existing model. The back is covered, which indicates that the taillights may be updated. We wouldn't expect a radically different look, since the MKC already has a full-width taillight treatment. We also noticed that the wheels appear to be inspired by the cool turbine wheels of the Navigator. Whatever the other changes are, we'll probably see them soon. This is clearly just a refresh, and so there's a good chance we'll see the production model revealed by the end of the year, or early next year at the latest. Related Video:

Sell your own: 2003 Lexus SC 430

This is part of an occasional look at what's for sale on Autoblog. Looking to sell your car? We make it easy and free. Quickly create listings with up to six photos and reach millions of buyers. Log in and create your free listings. At the Lexus SC 430 preview - in the spring of 2000 - the disappointment among automotive journalists was palpable. Lexus had taken the truly captivating design of the first-generation SC and essentially disregarded it, replacing the earlier architecture with one drawn by Toyota's team in Europe. The contrast wasn't as strong (or dysfunctional) as when the Jag E-Type morphed into the most unfortunate XJ-S in 1976, but it was close. Some seven years after production of the SC 430 ended, however, a coupe/convertible prospect has the benefit of both hindsight and nostalgia. Lines that once looked almost awkward when juxtaposed against the first SC are softened by time. And while the SC 430's retractable roof wasn't the first execution of a coupe/convertible hardtop, you can assume it works more predictably than its German counterparts. While purportedly seating four, this is a tight 2+2. But with V8 power and a 3,800 pound curb weight, the SC 430 is a substantive, comfortable way of propelling yourself down the road; think of it as a Miata for those wearing 'plus' sizes. This for-sale example, with 165,000 miles, is well-used, and its $9K asking price is at the top of the dealer range. But if you like its color and equipment, a well-maintained Lexus should - and could - give you another 100,000 miles of reliable service. Related Video:

The origins of the Jeep Wave | The Exposition

Jeep culture is tight-knit community of passionate enthusiasts with plenty of interesting stories and traditions, like the Jeep Wave. But how did the Jeep Wave start? Episode 2 of The Exposition looks at some theories behind the origin of this driving ritual. Show full video transcript text [00:00:00] Get behind the wheel of a Jeep, and you'll hopefully notice the other Jeep owners waving at you as you pass by. It's kind of cool actually, but one thing we couldn't help wonder is, where and how did this wave start? If you've never heard of the Jeep Wave, don't worry, you're not alone. For example, my friend James - that's James. Back in 2013 he bought his first Jeep. Like many new young Jeep owners, he had no idea about the wave. He quickly caught on, though. [00:00:30] So where did it start? Oddly enough, I was only able to find three pretty convincing theories. Theory One - The wave started in WWII as a way for soldiers to acknowledge each other while driving by on patrol. Theory No. 2 - The wave began after the war. Which also makes sense. Since civilian Jeep owners were most likely returning veterans who already appreciated the car, the wave was a way to acknowledge each other's service. [00:01:00] Theory No. 3 is the wave started much later, in the 70s when off-roading really took off. Kind of a way to salute a kindred spirit out looking for adventure. Now, there is an unspoken rule of who waves first. The rule is, the younger Jeep always salutes the older one. Or if you have a stock Jeep you must wave to a modified Jeep first. These are interesting theories, but one thing's for sure, the Jeep wave is a unique tradition. The next time you drive a Jeep, be sure to wave as you pass another by. Related Video: Jeep Automotive History Ownership SUV Off-Road Vehicles Classics Videos