Blog

GM will recall more than 3.3 million vehicles in China for suspension defect

BEIJING (Reuters) - General Motors' joint venture in China, Shanghai GM, will recall more than 3.3 million Buick, Chevrolet and Cadillac vehicles stating Oct. 20 because of a defect with the suspension system, China's market regulator said on Saturday. GM Shanghai said in a text message to Reuters that the suspension arm may be deformed under extreme operating conditions, but there are no known casualties related to the issue. The recall includes cars produced between 2013 and 2018, the State Administration for Market Regulation said in a statement. GM will contact those affected and repair the vehicles free of charge, it said. (Reporting by Josephine Mason and Hallie Gu; additional reporting by Yilei Sun; Editing by Shri Navaratnam and Michael Perry)Related Video: Image Credit: Qilai Shen/Bloomberg via Getty Recalls Buick Cadillac Chevrolet Safety

Fast sedans and loose Tweets | Autoblog Podcast #555

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Associate Editor Reese Counts. Reese has been traveling a lot, and the two discuss his recent first drives of the 2019 Mercedes-AMG GT four-door and the 2019 Audi Q3. The pair also talk about the 2018 BMW X2 that's been in the office this week. Also on the agenda is the SEC's lawsuit against Elon Musk, Ola Kaellenius replacing Dieter Zetsche at Mercedes-Benz, Cadillac's move back to Detroit and the upcoming reveal of the 2019 BMW 3 Series at the Paris Motor Show.Autoblog Podcast #555 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2019 Mercedes-AMG GT four-door 2019 Audi Q3 2018 BMW X2 Elon Musk lawsuit New Mercedes-Benz CEO Cadillac is heading back to Detroit The new 3 Series debuts next week Feedback Email – Podcast@Autoblog.com Review the show on iTunes

Smart will show new electric concept in Paris

Smart, the Daimler-Benz city car brand, is 20 years old. Its first product, the City-Coupe was presented in fall 1998, based on earlier concepts designed in tandem with the Swiss watchmaker Swatch. The two decades have seen Smart produce different cars such as low-slung roadsters and four-door Forfours based on Mitsubishi running gear, but the tall and short city car is what Smart has always been about. The new concept, called Forease, retains the "classic" Smart appearance, just restyled for the next decade. The completely roofless Forease resembles an earlier limited-edition Smart production version, the slightly sandal-like 2002 Crossblade, but it's a fully electric vehicle unlike the Crossblade; later on in 2011, Smart also showed an electric concept called Forspeed. The Smart brand is turning electric-only in 2020, and the concept will herald that era. From 2017 on, Smart has already started selling solely electric cars in the U.S., Canada and Norway. According to the manufacturer, the Forease concept itself is an "uncompromised" and "uncomplicated" urban mobility vehicle, with both a cut-down windshield and a cut steering wheel. There are roll hoops behind the seats, molded into the rear structure. There is no roof at all, not even a temporary hardtop, so the HVAC system has been removed and the dashboard's vents have been filled in with extra displays. "The Smart Forease is proof that Smart thinks unconventionally. Its design is reduced and pure," said Gorden Wagener, Daimler AG's chief design officer. Related Video:

Infiniti Q60 Project Black S packs F1-derived hybrid twin-turbo V6

At the 2017 Geneva Motor Show, Infiniti unveiled the Project Black S, a souped-up version of the Q60 coupe that packed technology derived from the Renault Sport Formula 1 Team's race cars. Details were scarce. Aside from some F1-inspired bodywork, all we knew was that the twin-turbo V6 would be paired with a kinetic energy recovery system, or KERS for short. At next week's Paris Motor Show, Infiniti is bringing a new concept that's a bit more polished as well as some additional details about what rests under the hood. The car is still dubbed the Infiniti Project Black S. The car still packs a twin-turbocharged 3.0-liter V6 paired with an energy recovery system. Infiniti claims the car makes 563 horsepower, up from 400 in the Q60 Red Sport 400. The Project Black S should hit 60 mph in fewer than four seconds. The powertrain uses three motor generator units (MGU) and a single MGU-K that harvests brake energy. Two electric turbochargers harvest heat energy from the exhaust, meaning the car can gain energy both under braking and acceleration. Visually, there's not much that's changed from last year's Geneva concept. We only have one new photo, but to our eyes the only difference is a few yellow accents on the front bumper. We'll have to wait until next week's reveal for more photos. Related Video:

2019 Suzuki Jimny First Drive Review | Internet darling, real-world riot

FRANKFURT — Imagine a Mercedes G-Wagen hit with an incredible shrinking ray, and you'll not be far short of the new fouth-generation Suzuki Jimny, last sold in North America in the mid-1990s as the Samurai. The resemblance is astonishing, but there's enough of the Land Rover Defender, Toyota FJ, Honda Element and Jeep Wrangler in there, too, to keep Merc's copyright lawyers sitting on their hands. Cute as a family of otters in your bath, the new Jimny's proving the social-media hit of the fall, with online fan clubs starting, splintering and re-forming as they argue over which of the six new body colors is their favorite. Yet Jimny's no style pony. That lime green 'Kinetic Yellow' color might be the ultimate urban accessory, but it's formulated to make this tiny utility stand out in bad weather and on building sites. And in a world of fragile multi-clutch-based all-wheel-drive crossovers, Jimny is the real deal: body-on-frame construction, coil-sprung solid axles with three-link location at the rear and a panhard rod at the front, and a transfer-box set of crawler gears. And with entry, exit and breakover angles and ground clearance to rival that of a mountain ibex; this is a proper all-terrain automobile, just at five-eighths scale. It all started of course with Hope: the Japanese Hope Motor Company. Its OM360 was a 1960s Lilliputian take on the World War II Willys MB Jeep. Suzuki bought the design from Hope, and relaunched it with a new engine in 1970 as the first Jimny. Through three generations and 48 years, Jimny's been called variously: SJ; LJ; Farm Worker; Samurai; Gypsy; and Sierra. It's been rebadged as a Mazda and a Maruti, and has sold a total of 2.85 million across 194 countries, including at one time America, though the company pulled out of the U.S. car market in 2012. The outgoing third-generation Jimny had lost its way with a bland, wind-cheating design. The new Jimny is back to basics. Shortened by 1.2 inches, it's now 143.5 inches long, 64.8 inches wide, 67.9 inches high and runs on an 88.6-inch wheelbase. These bonsai dimensions are dictated by the Japanese Kei car, a size and taxation class aimed at tight urban spaces. The new car also gets a stronger, cross-braced ladder frame under the separate body isolated on eight rubber bobbins.

Fiat brings back throwback 1957 Edition for the 500

Fiat is bringing back its retro-styled 1957 Edition treatment for its 500 cabrio and hatchback models, an homage to the original 500, which debuted in 1957 as the Nuova Cinquecento. It's like a Vespa-ization of the little Italian subcompact. For an extra $995 and based on the Lounge trim, the 1957 Edition brings a new, retro fascia with throwback Fiat badging, white exterior mirrors and a choice of white, green or blue 16-inch retro-inspired wheels. You get a two-toned paint job with a white roof on hatchback versions and a black soft top on cabrio models, plus choice of three retro-inspired paint colors: celeste blue, chiaro (light green) and bianco ice (white). Inside, designers have contrasted a mostly ivory interior with marrone brown leather seats decorated with ivory accent stitching on the setbacks, perimeter and cushions. There are also ivory door-trim panels and a marrone brown leather shift boot with manual-transmission models. The steering wheel is wrapped in leather and continues the ivory-brown theme. It's accented with a retro Fiat badge. The Fiat 500 comes standard with the new 1.4-liter MultiAir Turbo engine, which boost output to 135 horsepower and 150 pound-feet of torque and features a sport-tuned exhaust. It's paired with a standard five-speed manual transmission or an optional six-speed automatic. The 1957 Edition was last available for the 2016 model year in a slightly different guise and price point. You can once again retro-pimp your 500 at dealerships starting this fall. Related Video: Featured Gallery Fiat 500 1957 Edition Image Credit: FCA Fiat Convertible Hatchback

Mazda hands over first factory-restored Miata

In August 2017, Mazda announced that it will be offering factory quality restoration work for the original, NA body Mazda MX-5 Miata introduced in 1989. The program also included parts support, as Mazda wants to underline how much the original Miata still means to it. The program was launched with exemplary work carried out on a Miata owned by Mazda, but the first customer car has now been finished. The first car was picked from 600 applications sent to Mazda. Out of all these cars needing factory certified work, the 1992 British Racing Green V-Special owned by retired tomato farmer Keiji Nishimoto was chosen to be the first. The Eunos-badged limited-edition car was bought new by Nishimoto, and he told Mazda the car had been instrumental in creating some wonderful road-trip memories. The V-Special edition came in a British roadster-style color combination: "Neo" green over tan leather, complete with a retro-style Nardi wood wheel. The car also has a front strut bar and a limited-slip differential. Nishimoto had already been planning to get his car restored, but getting it done by Mazda during the summer was even better. The car was finished in August, and it was officially handed over to its owner in September. To have owned and enjoyed a car for a quarter-century and getting a chance to experience it in as-new condition again must be a fantastic experience. Nishimoto says the car is now good for another 25 years of driving. For the time being, the TUV Rheinland certified restoration program is only available for Japanese customers. But since a large percentage of first-generation Miatas are still on the road, and a large percentage of those will need bodywork done in all the usual places, we would happily see Mazda reach out to European and American customers as well. Related Video:

Ram 2500/3500 Heavy Duty trucks rustle up more luxury with Rodeo Edition

Now there's an even more luxurious version of Ram's Heavy Duty 2500/3500 pickup called the Ram Rodeo Edition. This takes the already highly-appointed Laramie Longhorn heavy duty work truck and gives it even more features for the 2018 model year. On the outside you get body-colored bumpers and side-steps. For single-rear-wheel trucks you'll get 20-inch aluminum wheels, and dual-rear-wheel trucks will have 17-inch polished aluminum rims. The Longhorn name will stretch across the tailgate in a more subdued fashion than we thought it would have. A suede headliner is the main change over the base Longhorn on the inside. Functionality is where the your money really goes for the Ram Rodeo, because it'll come with the gooseneck trailer prep package and bed-view camera. In addition to that you'll get a rear air suspension to aid in load-leveling when hauling payload or a trailer. A set of skid plates and the Mopar bed step round out the Ram Rodeo Edition changes. You'll be able to get the Ram Rodeo with the crew cab or mega cab configurations. Both the 6.4-liter V8 and the 6.7-liter Cummins I6 diesel are fair game as well. A base 2500 Longhorn will run you $56,440 including destination, but the Ram Rodeo Edition starts at $62,485. The 3500 bumps that up to $72,955. Luxury trucks are not cheap. Ram says the Ram Rodeo Edition will be available in the third quarter of 2018, so essentially, they've arrived. Featured video:

Kia Soul EV spied, shows over 250-mile range

The upcoming Kia Soul EV has been spied again at the Nurburgring. This time, it was wearing substantially less camouflage, revealing a shape very similar to conventionally powered Kia Soul prototypes. We also get our first look at the compact hatchback's interior. The interior reveals that the Soul EV should have impressive driving range, too. We'll get to the design aspects of this prototype in a moment, but first we want to address the car's range, which is shown on the infotainment display. It clearly shows that this car had 92 percent of its charge remaining, with an estimated range of 437 kilometers, or about 271 miles. That's a lot of range, and it's also in keeping with the European range estimate for the Hyundai Kona Electric, which was 292 miles. We don't expect quite that much range in the U.S., since the Kona is rated for 258 miles under EPA testing. But this makes us think the Soul could have roughly the Kona's U.S. range, which would be impressive. This could also suggest that the Soul EV will have the same 201-horsepower electric motor as the Kona and the Kona's cousin, the Niro EV. It isn't just range that's revealed with this prototype. This example gives us the best look we've had yet at the little electric. It shows us that the Soul EV shares the same boxy shape, boomerang-shaped taillights, and full-width headlights of the gasoline models. There are some unique deviations, though. While the wide headlight section is the same shape as the internal combustion model, it actually appears to house the main illuminating lights. The other version puts the lights for forward illumination lower in the front fascia. On the Soul EV, these lower light pods are still there, but they appear to be for accent lighting, maybe turn signals or possibly fog lights. The large lower grille of the gasoline Soul is also virtually gone except for a small opening at the bottom. It will be interesting to see what Kia does with all this extra space. The interior is an evolutionary take on the current model. The biggest difference appears to be a revised infotainment system with a wider screen and buttons placed underneath, rather than on each side. This being the EV model, it has a little rotary knob for shifting rather than a lever, and the instrument panel shows a speedometer and a dial that provides power information. The doors seem to have some interesting metallic trim with swoopy patterns.

Cadillac moving back to Detroit after four years in New York City

After four years in New York City, The Wall Street Journal reports that Cadillac is moving its headquarters back to Detroit. This comes about four months after former head Johan de Nysschen was ousted from the automaker for a variety of reasons, including slumping sales and a product line not in concert with consumer tastes. It's also months after a Cadillac spokesperson told The Detroit Free Press that "It's 100 percent that we're staying [in New York City], that was never a question." Let's be clear about this, the move to New York was not Cadillac's biggest issue. As contributing editor James Riswick reminded us this morning, "the decision to sell three similarly sized large sedans, a variety of obsessive BMW-fighting cars, and only one crossover was not done while they were in New York." That was all planned years ago, before de Nysschen ever joined the company. He may not have righted the ship, but he didn't set it on its course. Note that the XT4, Caddy's second crossover after the SRX-replacing XT5, is just now hitting the market. The move to Manhattan was meant to give Cadillac more autonomy and put its leadership in a place where they could get a sense of what a luxury car buyer wants and needs. Detroit is great, but it can be an echo chamber, especially in a company as large and storied as General Motors. The problem is that Cadillac still relies heavily on Detroit and that poor communication was slowing development, according to the report. Steve Carlisle, a long-time GM employee, took over the brand after de Nysschen was let go. He and more than 100 others work in New York. Related Video:

Jim Hackett says metal tariffs costing Ford $1 billion in profits

Ford CEO Jim Hackett divulged in an interview with Bloomberg that the Trump administration's tariffs on metals imported from the European Union, Canada and Mexico have affected the automaker's balance sheet, adding that trade disputes need a quick resolution. "From Ford's perspective, the metals tariffs took about $1 billion in profit from us," Hackett told the outlet. "The irony is we source most of that in the U.S. today anyways. We're in a good place right now, but if it goes on longer there will be more damage." Hackett did not specify what period the $1 billion covered, but a Ford spokesman said the CEO was referring to internal forecasts at Ford for higher tariff-related costs in 2018 and 2019. President Trump in March announced his intention to enact 25 percent tariffs on steel imports and 10 percent on imported aluminum from the three trade zones as a way to protect the U.S. steel industry. The move sent U.S. automakers' stock prices plunging at a time when they were coming off weak monthly sales reports. Separately, President Trump has targeted China with two rounds of tariffs targeting a combined $260 billion worth of imports. China has responded by enacting 25-percent tariffs on U.S. goods including vehicle imports. In the interview, Hackett said that has hurt demand for Lincoln, which has found a growing market for its luxury vehicles in China, and made the price of the Lincoln MKC less attractive to Chinese buyers. The MKC is built at the company's Louisville, Ky. assembly plant. "We've had to move people in that factory to other operations because of that trade problem," he said. It's not clear what those moves entail or how many workers were involved. Autoblog sought comment from a Ford spokeswoman and will update this story if we hear back. Ford last month announced it was scrapping plans to import the Focus Active small crossover to the U.S. from China because of the new 25-percent tariffs on Chinese imports. Material from Reuters was used in this report Related Video:

Hyundai i30 Fastback N revealed, but still not for the U.S.

Hyundai just revealed a car that we won't get stateside, the i30 Fastback N. This four-door fastback gets the same N treatment as the i30 N hatchback, another fast Hyundai that isn't sold here. We all love a good hatchback, but the Fastback variant looks a bit more handsome and mature comparatively. It's hard not to like the lines, especially after hearing the loud, crackling exhaust that pops aggressively on the overrun. Just like the i30 N hatchback in Europe and the Veloster N we're getting here, the Fastback gets the 2.0-liter turbocharged four-cylinder with two power outputs available. The base N makes 246 horsepower and 260 pound-feet of torque, but the Performance package nets you 271 horsepower. It also has a temporary overboost feature that unleashes 279 pound-feet of torque for a limited period. It's almost the exact same power as the Veloster N, but that car is rated at 250 and 275 horsepower in its two trim levels. The Fastback N is said to get to 62 mph in 6.4 and 6.1 seconds respectively. A six-speed manual will remain as the only transmission offering for the time being. Hyundai hasn't officially mentioned it yet, but a video it released essentially confirms the presence of its electronic limited-slip differential for this car. We expect it to be offered as part of the Performance package like it is in the other N variants. The Fastback N is set to make its world debut at the 2018 Paris Motor Show, but Hyundai made an entertaining video of its World Rally Championship drivers racing about Denmark and released some preliminary info today. If you haven't heard the exhaust for any of Hyundai's N cars, then here's your chance; it's pretty awesome. View 26 Photos Featured video: Image Credit: Hyundai Paris Motor Show Hyundai Performance Sedan hyundai veloster n hyundai i30 n

British automakers take costly precautions as Brexit 'no deal' fears grow

LONDON — Carmakers in Britain have triggered some Brexit contingency plans, such as certifying models in the EU, and are working on redrawing production schedules and stockpiling more parts to defend against any loss of unfettered trade after Brexit. The moves are aimed at ensuring plants, which rely on the just-in-time delivery of tens of thousands of components, can keep operating after Brexit on March 29, but will add costs and bureaucracy which could risk their long-term viability. London and Brussels hope to agree a deal by the end of the year to avoid tariffs and trade barriers, but Prime Minister Theresa May's proposals have been criticized by both Brexiteers, who want a cleaner break from the bloc, and the European Union. McLaren Automotive is looking at having its cars certified by both a British and an EU agency to smooth sales. It is also planning to stockpile critical components and change shipments into the EU around Brexit if there is disruption. "I will sell a little more in January and February and plan to pick the volume up in May and give us a leaner period through the change point," Chief Executive Mike Flewitt told Reuters. BMW, which said last week it would move the annual summer-time shutdown of its British Mini plant next year to April, is looking for lorry parking areas and warehousing on both sides of the channel and is seeking to sign contracts to lease certain locations, a spokesman said. It is also investing in IT systems to handle any new red tape as carmakers estimate tens of thousands of new documents could be needed if tariffs and customs are imposed. The German carmaker's Brexit plans are costing millions of pounds, a source familiar with the matter told Reuters. But Honda, which builds 10 percent of Britain's 1.67 million cars at its Swindon plant in southern England, is not in the market to buy "huge amounts of warehousing space," its Europe boss Ian Howells told Reuters. "It's been a very precise calculation or estimation of what components need to be brought in," he said, adding the firm could also alter its output to sell more into the EU at the start of next year. Waste of money? Many British carmakers have also asked suppliers to look into how they would handle delays at ports, executives told Reuters, as thousands of parts, engines and finished models move between Britain and the continent every day.

McLaren 600LT First Drive Review | Longer, lighter and a lust for life

BUDAPEST, Hungary — There is no point when driving a McLaren 570S where you think, "Boy, this feels a bit soft, flabby and underpowered — what it really needs are some extra horses and a sharper setup." And yet that's exactly what McLaren has done for the 600LT, the brand's newest addition to the Sports Series and latest chapter in the "Longtail" story. Literally, this equates to nearly three inches of extra aero-enhanced bodywork and more power. Emotionally, it represents a lot more. Given that the previous installments were the F1 GTR and 675LT, you have some sense of where the 600LT sits, and the expectation it needs to live up to. Junior supercar or not, there's nothing babyish about this car's intent. My previous experience of McLaren Sports Series cars on track includes lapping Silverstone in the 570GT. On street-spec Pirelli P Zero tires and with steel brakes, this supposedly comfort-oriented model pulled 168 mph down Hangar Straight and is agile enough to shame supposedly track-focused supercars from a class above. Yet the 600LT has an extra 30 horsepower, carries significantly less weight, and wears semi-slick Trofeo R rubber on its spindly forged wheels. Figures include peak output of 592 horsepower, 0-60 mph in 2.8 seconds, 0-124 mph in 8.2 seconds and a top speed of 204 mph, and cornering speeds have increased compared to the more powerful and sophisticated 675LT. Just how sharp do they want to make this thing? The answer comes on another F1 track, this time the Hungaroring on the outskirts of Budapest. Before I'm allowed out in the LT, I get a handful of sighting laps in a 570S, until now the sharpest Sports Series in the range and already a formidably fast and agile car in its own right. Like any McLaren, it has a lovely combination of superb visibility, a driver-focused cockpit, pin-sharp controls and huge punch from the 3.8-liter, twin-turbocharged V8. Where others mask their forced induction, McLaren has always seemed proud to highlight the Millennium Falcon-style rush of boost, the trademark lack of curb weight offsetting any sense of low-rev lethargy. And sure enough, the 570S demands that its driver is on top of things. Greedy throttle applications require corrections at the wheel, while late braking from high speeds causes the rear axle to break loose, writhing about in marked contrast to the locked-down Super Series 650S or 720S. What can I expect to be different in the 600LT?

Jaguar sets a lap record at a near-forgotten French race track

If asked to name any race track in France, most racing and car enthusiasts would probably answer the Circuit de la Sarthe, known for the 24 Hours of Le Mans. Then there's the famous Magny-Cours or Circuit Paul Ricard, but not everyone remembers the Circuit de Charade near Clermont-Ferrand. This challenging track has been called a "twistier and faster" version of the Nurburgring, and in its original five-mile form, it barely had any straights. Formula 1 races were held there in the late 1960s and early 1970s, but safety concerns saw the French Grand Prix moved to Paul Ricard for most of the 1970s and 1980s, alternating with Dijon-Prenois. Later on, the track was essentially halved during modernization work, and it's now largely used for track days. The full length circuit was last used in 1988. This history lesson about a seemingly forgotten French race track is due to one good reason: Jaguar has returned to the venue to set a lap time with a new, all-wheel drive XE. The flying lap of the full five-mile track was the first one in 30 years, and the 4-minute, 9-second lap time set by Belgian racing driver Vincent Radermecker now stands as a record. Due to changes and the fact that the track originally utilized parts of public roads, the lap now included two gateways and a roundabout. Unshockingly, those weren't around in its racing days. The comparisons with the Nurburgring are apt, as Radermecker's comment confirms. "I set the production (sedan) record at the Nurburgring in the XE SV Project 8 last year and this lap was every bit as demanding. The longest straight is barely 600 metres, so I can see why drivers used to call this the French Nurburgring." The Jaguar used for the record lap is an XE 300 Sport, which is powered by Jaguar's 300-horsepower 2.0-liter four-cylinder turbo engine. It hits 60 mph in 5.4 seconds, and the average speed on the Charade lap was 72 mph. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Jaguar XE record lap View 9 Photos Image Credit: Jaguar Jaguar Automotive History jaguar xe

Burt Reynolds' vehicles up for auction at Barrett-Jackson

Burt Reynolds' influence on car culture cannot be overstated. Be it "Smokey and the Bandit" or "Cannonball Run," his films inspired a generation of car enthusiasts. He died a few weeks back from cardiac arrest at age 82. This weekend, four vehicles from Reynolds' personal collection — three Pontiacs and a Chevy — will go up for auction at Barrett-Jackson in Las Vegas. It seems Reynolds had plans to sell the cars before he passed. He even filmed a short teaser for the auction and planned to attend the event himself. Three of the cars are Pontiac Trans Ams. Two are re-creations of the cars he drove in "Bandit" and the film "Hooper." Both are 1978 models. The third Trans Am is from 1984 and was used to promote Reynolds' USFL team, the Tampa Bay Bandits. The fourth vehicle is a 1978 Chevy R30 pickup truck. It's styled like the truck he drove in "Cannonball Run." None of the vehicles were actually used in the movies. But they were registered in his name, making them far more legitimate than some other movie-inspired clones. It's unclear how many Bandit Trans Ams Reynolds has owned over the years. Another car connected to him sold for $450,000 back in 2014. His death is sure to drive the price of these new cars even higher. Related Video: Image Credit: Barrett-Jackson Celebrities Chevrolet Pontiac Auctions Truck Coupe pontiac trans am burt reynolds

Mil-Spec built a one-off, track-ready Hummer H1

Mil-Spec is one of the latest companies looking for success with restored and modified versions of iconic vehicles. Rather than Porsche 911s or '60s trucks and SUVs, its canvases are Hummer H1s. The customer vehicles are big, brash off-road machines, but that's not all the company is capable of. We recently learned that the crew over there built a Hummer H1 meant for race track use, and it is amazing. The base vehicle is a four-door convertible pickup truck, and Mil-Spec thoroughly changed the suspension. It has custom coilovers with stiff springs, and the entire suspension geometry has been revised. Overall, it was lowered a stunning seven inches compared with a stock H1. The H1's in-board brakes now feature six-piston brake calipers, and the wheels are wrapped in low-profile Pirelli P-Zero tires. Also impressive is the fact that the truck still has a part-time four-wheel-drive system. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Under the hood is a 6.6-liter Duramax diesel V8 similar to that in the customer models. But this one has been tuned all the way up to 800 horsepower and 1,500 pound-feet of torque. This engine also plays a role in this truck's origins. Apparently the truck was used for final powertrain testing and development. But it was also built to highlight the company's capabilities. If you want one of these, well, you can't have one. At least not yet. We asked a Mil-Spec representative, and he told us that there are no plans for offering track-oriented H1s. That's understandable, since the company is still working through building and selling its initial run of 12 off-road-ready vehicles. He did say the truck has generated a lot of interest, though. So, maybe when the company has time, and if a really wealthy buyer really wanted one, maybe the Mil-Spec could work something out. But at least in the meantime, the company is sticking to tall, chunky-tired H1s. Related Video:

Lotus wants to find its first car, built by Colin Chapman

Lotus is looking for the first car its founder ever built. The Lotus Mark I, a trials special Colin Chapman built in a small garage in London in 1948, has been lost to history and the company has been trying to find it for ages. As Lotus is 70 this year, the first Lotus would be quite the icing on its birthday cake. Colin Chapman constructed the first Lotus in a garage that belonged to his girlfriend's parents, at the age of 20. The car was reportedly an instant competition success, but Chapman's competitive spirit meant he soon started on the car's successor, the Mark II, and sold the Mark I in November 1950 for GBP135 after advertising it in Motor Sport magazine. Both the Mark I and II were based on Austin 7 hardware, but the latter used different Ford engines while the Mark I retained an Austin 7 engine. Experiments with lightening the vehicle and developing a better suspension design were Lotus hallmarks from the very beginning, as the car needed to beat Britain's rough rally terrain and have enough grunt to climb hills. Lotus Engineering was set up in 1952, later spawning Team Lotus that started out in Formula 1 by the end of the 1950s — and the rest is history. But Lotus owes everything to the humble Mark I. "The Mark I is the holy grail of Lotus' history," Clive Chapman, Colin's son explains. "It's the first time that my father was able to put his theories for improved performance into practice when designing and building a car. To locate this landmark Lotus, as we celebrate the 70 th anniversary, would be a monumental achievement. "We want fans to take this opportunity to look in every garage, shed, barn and lock up they're allowed to," added Chapman. "It's even possible that the Mark I was shipped from the UK, and we'd love to know if it survives in another country." This means the first Lotus could even reside in the United States, if it is still in one piece. Related Video: Featured Gallery 1948 Lotus Mark I News Source: Lotus CarsImage Credit: Colin Chapman Foundation Lotus Automotive History Convertible Classics

Hyundai returns to spark-compression engines with $5 million grant

Ed note: This version adds comment from a Hyundai spokeswoman. Hyundai said Monday it has won a grant worth $4.95 million from the U.S. Department of Energy to support research and development for an advanced, mixed-mode gasoline spark-compression engine, meaning the Korean automaker appears to be back at it in its quest to develop a fuel-efficient, low-emissions gasoline compression engine that can catch the likes of Mazda's Skyactiv-X. Hyundai says the three-year grant will leverage existing work with advanced valve train and previous DOE-funded technologies. Hyundai previously was working on its own HCCI — short for homogeneous charge compression ignition — project, developing a Gasoline Direct-Injection Compression engine with help from Delphi that used supercharging and turbocharging, a high compression ratio and fully variable valve train. But it has never come to fruition, reportedly due in large part to added costs. Hyundai spokeswoman Michele Tinson said the grant will support a new project for the automaker. "It's a departure from the past efforts forging a new direction forward for Hyundai where the fuel and engine combustion modes can be optimized to meet new targets," she said. Tinson said the GDCI project is completing its third round of DOE funding. Hyundai in December said it plans to release 38 environmentally friendly vehicles along with its affiliate Kia, and using a variety of technologies, by 2025. Hyundai alone will account for 18 of them. The aim is to use the spark-compression engines for conventional gasoline-powered vehicles, plug-in hybrids and mild hybrids. "The opportunity to explore mixed-mode engine technology through the DOE's grant signifies Hyundai's commitment to advanced research technology and compression engines," John Juriga, director of powertrain technologies at Hyundai America's Technical Center near Ann Arbor, Mich., said in a statement. "The co-operative research project along with Michigan Technological University and Phillips 66 signifies the importance in developing fuel and engine innovations that work together for optimal vehicle performance and leading fuel economy ratings." Mazda's Skyactiv-X compression-ignition engine uses Spark Controlled Compression Ignition to achieve diesel-like gains in fuel economy — about 20 to 30 percent higher than its current gasoline engines — and lower emissions from regular gasoline. It's said to debut in late 2019. Related Video:

New presidential limo spotted in use for the first time

It has been a long lead-up to the new presidential limousine, but now it appears General Motors has "The Beast" in working order for President Donald Trump. The new limo was spotted in public for the first time this weekend in New York City in Trump's motorcade, reportedly on its way to Trump Tower. Said to have been in development since 2013, the $15.8 million armored Cadillac is making its debut as Trump's ride to the U.N. General Assembly this week. The grille suggests looks along the lines of a Cadillac CT6 V-Sport, but the similarities don't go much beyond that. If you look closely, Trump appears to be in the second "Beast" of the twin truck-based Cadillacs that go by in the video. The limo has a diesel engine to propel its near-20,000-pound self down the road, but we couldn't detect much of an oil-burner sound over those gigantic truck tires. This week in NYC will showcase motorcades and fancy presidential limos from around the world, all coming in for the big annual meeting at the U.N. Trump's presidential limos get shipped around the world too because they have their own plane: a C-17 Globemaster cargo carrier. There's no shortage of cool features on the new limo, and we detailed those here. While some of the awesome defense mechanisms are public knowledge, we're sure there are plenty that remain classified. New model presidential limo noticed awaiting Pres Trump at Wall Street heliport. Photo by @stevebruskCNN pic.twitter.com/lEytRcJ9rt — Mark Knoller (@markknoller) September 23, 2018 Featured video:

2019 Subaru Forester First Drive Review | Hidden treasure

ASHEVILLE, N.C — Forester sales have been nothing short of spectacular for Subaru. The fourth-generation Forester sold more than double what the first three generations sold ... combined. It makes up about 20 percent of Subaru's current U.S. sales, and 58 percent globally. Clearly, Subaru has been the right thing with the Forester to bring people over to the brand, and to keep them there. So why mess with a good thing? Subaru hasn't, really. The all-new 2019 Forester looks remarkably familiar – slightly tweaking a few things to refine the experience without alienating buyers. They improved aero while maintaining huge windows. And even the small-outside-big-inside formula that makes it such a practical choice was improved, gaining interior volume with a minimal increase in length and width. Peel away the sheet metal, though, and there have been significant changes for the Forester, which shares few parts with the outgoing generation. The updated engine gets direct injection. The reworked frame, using more high-strength steel, means it has 1.4 times the impact absorption of the previous car. The geometry of the four-wheel independent suspension has been optimized for stability, the steering retuned, the transmission reworked for better power, efficiency, handling, comfort and safety. So, can this visually familiar Forester really feel all that different going down the road? More importantly, do we like it better? We headed into the Blue Ridge mountains around Asheville N.C. in order to find out. Our first vehicle for the day was the new Sport trim, with no added performance and some funkier design cues. Somehow, matte-ish orange accents have become the go-to hue to represent "sport." They stand out most around the air vents and gear shifter, in the contrast stitching and here and there in the instrument panel. The busy mix of materials and colors might find favor in youthful buyers, but were a bit too flashy for our taste. Loud as that interior might be visually, sonically the Forester is quite the opposite. We kept the radio off to enjoy, finally, a Forester interior in which we could hold a quiet conversation at highway speed. Depending on the surface, we heard some tire noise, but muted compared to Foresters — and tons of Subarus — of generations past. In normal, calm driving, the new Forester behaves like a more premium vehicle – calm and comfortable.

Junkyard Gem: 1990 Buick Electra Park Avenue

The Buick Electra may be best-known today as the subject of Sir Mix-a-Lot's My Hooptie, but this big luxury machine was one of The General's signature land yachts for more than 30 years. The final model year for the Electra was 1990, and so this very nice 1990 Electra Park Avenue in a Denver wrecking yard is a significant part of GM history. Just look at that plush interior, all blue velour and glossy fake wood! There are plenty of five-year-old cars on the street today with rougher interiors than this car. Thing is, not many used-car shoppers have much interest in a 28-year-old Buick, no matter how well-preserved. Who knows, the '90 Park Avenue may have been the car Royal D and Richie Rich rapped about in Scrapers. Even though there aren't any Electra badges on this car, the Park Avenue didn't become a separate model until the 1991 model year. GM luxury cars had these "coffin handle" door pulls for much of the 1970s and 1980s. Power, all 165 horsepower of it, came from a 3.8-liter Buick V6 driving the front wheels. This car was built on the same platform as the mid-1980s Cadillac DeVille and Oldsmobile 98. This car has the "Concert Sound II" audio system, complete with auto-reverse-equipped cassette deck. Car CD players were still rare, costly items in 1990. Plenty of Detroit cars got these "wire wheel" hubcaps during this era. Buick was the fifth-most-reliable marque in 1990. Hooray! Here's your address for success: Park Avenue. Related Video: Featured Gallery Junked 1990 Buick Park Avenue View 19 Photos Auto News Bugatti Automotive History Sedan

Spy shooter confessional | Autoblog Podcast #554

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore and Green Editor John Snyder talk to SpiedBilde spy photographer Brian Williams about just how he manages to get the shots of those camouflaged prototypes. Then, our editors discuss driving the Dodge Challenger Hellcat Redeye Widebody. They also chat about a couple of news items, including the official reveal of the Audi E-Tron Quattro, as well as the latest happenings at Ferrari — like the beautiful Monza SP1 and SP2.Autoblog Podcast #554 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Chatting with spy photographer Brian Williams of SpiedBilde Driving the 2019 Dodge Challenger SRT Hellcat Redeye Widebody Audi E-Tron Quattro Ferrari Monza SP1 and SP2, and other Ferrari news Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

2019 Dodge Challenger SRT Hellcat Redeye Drivers' Notes | Wide awake

Editor-in-Chief Greg Migliore — I've always wondered how Dodge would evolve the Challenger. There was only one real generation, not counting the rebadged Mitsubishi. Past and present, it's always looked the same. With the Hellcat, Demon, and now my personal favorite, the Hellcat Redeye Widebody, it makes total sense. There's no need to redesign it every few years. Just tweak it and add cool features — like flared fenders and the 797-hp Hellcat engine. It's all you need. This thing makes a statement. The Redeye is the car your neighbors want a ride in. I parked in our office building's basement, and co-workers heard me gunning the engine — two stories up. It's a growl. It has bass. It's angry. It gets a little metallic sometimes, depending on how and when you lay on the gas. I launched fairly hard at every traffic light. Sometimes I'd rev at idle. The Monroney that came with our test car lists the fuel economy as zero (it actually gets 13 city and a respectable 22 highway). But still. You get the point. I've always liked how the Challenger drives. It's big. It's heavy. The hood looks like the deck of an aircraft carrier. It's not trying to be a track rat. Go fast in a straight line. That's what you do. Take a hard left and maybe you skid a little bit. Maybe that's the idea. You don't eat cheeseburgers because they're good for you. You eat them because they taste good. Hey, cheeseburgers have protein. And vitamins. Healthy isn't the right description, but there are some benefits. The same reasoning applies to this Challenger. The interior is attractive, well-furnished and comfortable. The leather-trimmed seats are supportive. I love the saddle brown color. I used to say the coupe's low roof and bulky A-pillars were a problem. Then I got over that. You're driving nearly 800 hp, so sit up and be on your toes. The trunk is huge, too. I could have put a car seat in the back, had I needed to. You can live with the Challenger. And the Redeye is perhaps the best version yet. The starting price is about $60 grand. That's a steal. The price of our tester is $92,290. That's insane. The $6,000 widebody pack is the thing I'd recommend most out of all the options. Get the nice leather, too. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Ram Rebel 12 is luxurious off-road truck named for ... its touchscreen

When Ram came out with the totally redone 1500 pickup this year, the off-road-leaning Rebel didn't have Ram's giant 12-inch touchscreen as an option. Ram is remedying that omission with a new model called the Rebel 12. Yeah, it's pretty weird to name the car after the size of the infotainment screen, but that's what Ram came up with. The new model is more than just a screen, though. Ram is using it to throw in a few different tech and luxury options that we don't see in the more barebones Rebel. For one, it gets a 19-speaker, 900-watt Harman Kardon sound system with metal speaker grilles. You'll also get leather seats all around, and they're heated up front. So what will all this cost you? The Rebel 12 starts at $48,685, including destination charges — about $3,000 more than the base Rebel. That price gets you everything mentioned above and all the cool Rebel stuff including a lift kit, locking rear differential, Bilstein shocks, 33-inch tires and the tough-looking appearance features. Keep in mind that this base price is still only the V6 with rear-wheel drive. You can send it far higher when you start tacking on desirable options like the Hemi V8 and four-wheel drive. Ram says the luxurious Rebel 12 will be available in the fourth quarter of 2018. View 5 Photos Featured video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: Ram RAM Technology Infotainment Truck Luxury Off-Road Vehicles ram rebel

Pair of 1970 Plymouth Superbird barn finds hits eBay

Here are a couple noteworthy barn finds for sale right now on eBay: a pair of 1970 Plymouth Superbird muscle cars, found with their giant rear wings, retractable headlights and 440 Super Commando V8s apparently perfectly intact after being stored for decades in a garage in Maine, with their condition reportedly "very good for 40 years of dry storage." In his lengthy writeup, the seller notes the short-lived, modified Road Runner is "One of the most collectible muscle cars with one of the most incredible automotive Aerodynamic (sic) designs in automotive history." The Superbird, which saw only one production year, is approaching its 50th anniversary, with their values expected to soar, he notes. The seller explains that he learned about the Superbirds after he purchased his own blue Superbird from the Owls Head Transportation Museum auction in Maine in August for $187,000. "Just after I won the blue 1970 Super Bird with white bucket seat interior a man approached me and sat down next to me and stated he has 2 Super Birds in storage that he has owned for the last 40 years," he wrote on his listing. "He told me he purchased them from the original owners." One was B5 blue with white bucket seats, just like the one he'd just purchased. The other was Alpine White with black bucket seats. According to the back story, both cars were originally sold off the lot in 1970 at Blouin Chrysler Plymouth Dodge in Augusta, Maine, and the man who'd been keeping them in his garage said he knew both of the original owners, having purchased both cars from them around 1978. The man, who is reportedly a Mopar expert, kept them both registered until 1985 and 1987, with the registration stickers still intact on the windshields, then prepared both for storage, putting straight antifreeze in the motors and filling the cylinders with lubricating oil. Both cars are currently being stored in a garage in Massachusetts. The Alpine White Superbird has 42,497 miles on it. The highest of 84 bids as of this writing was $135,000. The blue version has just 27,416 miles on the odometer, with the highest of 93 bids at $151,100. Both were updated with Pioneer cassette decks that the seller says "are classics in themselves." The seller also notes he hasn't tried to get either car started but that both motors turn freely and that the head and taillights all work. Bidding ends Sept. 27.

2019 Mazda CX-5 to get 2.5-liter turbo and revised G-Vectoring

The 2019 Mazda CX-5 is getting Mazda's 2.5-liter turbocharged four-cylinder engine if this supposed internal document from Reddit is correct. The user claims a salesperson showed him the document in question. In addition to the availability of the turbo engine, Apple CarPlay and Android Auto appear to be added onto every trim level. Do take note that the document says it's from Mazda Canada at the bottom, so that's why the trim levels don't have the same names as they do in the U.S. Another interesting mention in there is G-Vectoring Control Plus. We've had Mazda's G-Vectoring Control technology for a little while, but never has a car come out with the Plus moniker on there. Our best bet is Mazda has revised its original G-Vectoring system for 2019; we'll have to wait for official information to see what exactly changed though. At the top of the page Mazda lists "substantial visual changes to the interior" as one of the highlights. The biggest change we can find related to that is a seven-inch LCD display added to the gauge cluster on what would equate to the Grand Touring trim in the U.S. At least Canada — and maybe we too — seems to be getting a fourth trim level called "Signature." This will probably consist of more expensive materials used throughout and maybe a few bonus tech features over the Grand Touring. The page shared looks plenty legitimate, but it's still best to maintain some healthy skepticism. It's also from Canada, so there could be some slight variations between how those cars are equipped versus those coming stateside. We're excited to see the 2.5-liter turbo in the smaller CX-5, though. It should give that car the extra punch it needs to fend off faster rivals in the ever-expanding crossover segment. Featured video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Lamborghini Huracan Spyder getting Performante looks

The Lamborghini Huracan has been around since the 2015 model year, and has been pretty much unchanged with the exception of a slightly restyled rear-drive variant. Lamborghini seems to think it's about time the Huracan was updated, since one of our spy photographers caught a new version in light camouflage out testing. It appears the new model borrows heavily from the Huraca n Performante. Up front, the main grille has pretty much the same set of fins and gills as the ultra-fast Huracan. There does appear to be an extra pair of horizontal slats on either side of the middle trapezoidal shape in the grille. Along the side, things are pretty much the same as on any current Huracan, but the lower intakes now have little winglets in the middle of the air inlets. The rear of the car is the most noticeably changed. It features two large exhaust tips in the middle of the rear fascia a la the Performante. They're also housed in another trapezoidal structure, again like on the top-dog Huracan. The rear diffuser is more aggressive than the current model, but not as much as the Performante. There aren't any openings behind the rear tires, either, and the air outlets on either side of the exhaust area are new. There's also a more pronounced duck tail spoiler than on previous models. We aren't expecting any earth-shattering changes for this updated Huracan. For one thing, the visual changes show that this is mostly the same car underneath. We could see it taking advantage of the stiffer suspension and some the light, molded carbon fiber parts of the Performante to help improve the performance a bit more. The Performante's active aerodynamics will probably stay exclusive to that high-performance model, though. There's also the fact that completely new versions of the Hurac an and Aventador are on the horizon, and may pack some huge changes such as hybrid powertrains. As such, Lamborghini is probably just going to try and stretch this model until it's time for the new one. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2020 Lamborghini Huracan Spyder spy shots Image Credit: SpiedBilde Spy Photos Lamborghini Convertible Performance Supercars

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.

2019 Lincoln Nautilus First Drive Review | A refresh that's more than skin deep

SANTA BARBARA, Calif. — Its name is new, but the 2019 Lincoln Nautilus is really a rebranded, restyled and updated version of the second-generation Lincoln MKX, which has been on sale since 2016. Renaming your bestselling vehicle is risky, but Lincoln has been struggling, and it feels the names of its vehicles are partly to blame. Recall that since 2007, Ford's luxury brand has used letters to name some models, including MKZ and MKX, and traditional names on others like Navigator and Continental. Well, now it's ditching the letters and renaming those vehicles. The MKX is now the Nautilus. The smaller MKC is rumored to become the Corsair, which was a name used by Edsel back in the 1950s. The seven-passenger Aviator will go on sale in 2019, and the MKZ's new name is anybody's guess. Zephyr again, maybe? NordicTrack is already taken. Lincoln has also been rolling out a new grille design, which debuted on the Continental in 2017 and replaces the unloved winged look that was supposed to remind luxury buyers of the elegance of the 1939 Lincoln Continental — but didn't. Fitting the new grille to the 2019 Nautilus completes that rollout, and the five-passenger SUV is certainly more handsome than before. Its mesh is a repetition of the Lincoln Star logo, and it works. The SUV's front fascia, headlamps and hood are new as well, and the hood has grown a sizable and attractive center peak. Underneath that hood is a new 2.0-liter turbocharged four-cylinder with direct injection. It's the same engine used in the smaller MKC and the Ford Edge, which shares the Nautilus' chassis, but Lincoln doesn't use the name EcoBoost for this and its other powerplants. The 2.0-liter replaces the naturally aspirated 3.7-liter V6 as the standard engine, and it's rated 250 horsepower at 5,500 rpm and 280 lb-ft of torque at 3,000 rpm on 93 octane fuel. Those numbers are down from the V6, which was rated 303 hp at 6,500 rpm and 278 lb-ft of torque at 4,000 rpm. But Lincoln has also replaced the antiquated six-speed automatic transmission with an eight-speed, so overall performance is comparable, and city fuel economy is up significantly. With the V6 and front-wheel drive, the MKX was rated 17 mpg city and 25 mpg highway. The new combination has a 21 mpg city rating. The considerably more powerful twin-turbo 2.7-liter V6 remains optional, rated 335 hp at 5500 rpm and 380 lb-ft of torque at 3250 rpm.