Blog

Is 'UX300e' trademark a sign of an electric Lexus to come?

That the biggest mainstream auto manufacturers will offer fully electric vehicles is no longer a question of if, it's an inevitable matter of when. Lexus has thus far taken the wait-and-see approach to the burgeoning market that is expected to take over throughout the next decade, but that could change soon. A recent trademark filing could indicate that Lexus is ready to introduce a fully electric version of its new UX crossover. Dug up by Autoguide, the trademark "UX300e" recently popped up on the European Union Intellectual Property Office (EUIPO). A separate look on TMView shows it is indeed linked to Lexus and was filed at the Norway office. The Lexus UX is just getting off the ground in December but is expected to be a huge seller for Toyota's luxury branch. The UX 200, which is offered with a naturally aspirated four-cylinder engine, is now Lexus' cheapest vehicle. The UX 250h offers a hybrid variant and is available with all-wheel drive. F Sport packages are available on both variants, in an attempt to add an extroverted sense of excitement. Although the trademark is far from a guarantee that such a car is coming, it all makes sense. Crossovers are booming business as of late, and many manufacturers, such as Kia with the Niro and Soul, are offering electric versions of cars that also have other traditional forms of motivation. We'll update as soon as we know more. Related Video:

Bugatti speeds up testing on its 3D-printed titanium brake caliper

There are only a few manufacturers on that planet that are so important and so specialized that their production of a brake caliper would warrant any amount of attention. Bugatti is one of those few. After premiering a 3D-printed titanium caliper early in 2018, Volkswagen Group released a video of engineers putting the new design to extreme speed and heat testing. Spoiler alert: flames and sparks are involved. Bugatti had a lot of claims and planted a lot of flags when it first showed this caliper. "World's first brake caliper to be produced by a 3D printer. Largest brake caliper in the automotive industry as a whole. First series manufacturer to use titanium. Largest titanium functional component produced by 3D printing in the world." Long story short, it's a big deal, but it is not yet stamped as ready for production. That's what the testing seen here is for. The video, which was brought to our attention by Motor1, shows the brake caliper in action, not on a car but in a lab. VW claims it's one of the most powerful brake test benches on the market, which we're inclined to believe considering the groundbreaking technology that has come from its Veyron, Chiron and Divo supercars. The test is exactly what you'd expect. They put the caliper onto a rotor, which is attached to a machine that spins the rotor and has all sorts of sensors that show the engineers the specs of the test. The video shows it spinning up to speeds in excess of 230 mph multiple times. The disc temperature skyrockets to 1,877 degrees Fahrenheit on the third spin, which elicits a light show of thermal heat, sparks, and flames. The engineers then take off the caliper and show the camera that everything is still in place and intact. The video does not clear the caliper for production, but it certainly looks like its getting close to that point. The package will likely debut for the Chiron, the Divo, or both and will most definitely cost thousands and thousands of dollars. Related Video:

2018 wrap-up, Ford Ranger and Mercedes A-Class | Autoblog Podcast #566

In the final Autoblog Podcast of 2018, Editor-in-Chief Greg Migliore is joined by Senior Editor Alex Kierstein and Associate Editor Reese Counts. They kick off the conversation by talking about a couple of hot new vehicles: the Ford Ranger and Mercedes-Benz A 220 4Matic. Then they round up the biggest stories of 2018 before helping a listener choose a new car in the "Spend My Money" segment. Thanks for listening, and happy holidays. The Autoblog Podcast will be back next year. Autoblog Podcast #566 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Driving the 2019 Ford Ranger Driving the 2019 Mercedes-Benz A-Class 2018 news roundup The ups and downs of Tesla and Elon Musk Losing Sergio Marchionne and the arrest of Carlos Ghosn Lots of layoffs Trump and tariffs Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

2019 Lincoln Nautilus commercials bring back Matthew McConaughey, plus pool

It's that time of year again, folks, time for another kind of strange, awkward Matthew McConaughey Lincoln commercial. And, yes, checking back when each ad comes out, it's usually in Decemeber or near the end of the year that these ads are released. This latest ad has the actor hanging out with a group of friends having a generic conversation about something over dinner. They all then head inside, and McConaughey breaks away from the group to walk to a pool table, and he promptly makes a trick shot on the pool table while a woman says "I've never seen that before." This leads to clips of McConaughey getting into a 2019 Lincoln Nautilus and driving it on beautiful backroads. And before he starts driving, there's a shot of the instrument cluster with a bunch of driver aid options displayed. The woman's words come in again, and he follows it up with his own words, "I have." This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Basically, the idea is that the trick shot of the cue ball threading between other billiard balls is like how the Lincoln driver aids help keep the Nautilus under control. Except it's a vague, awkward way of doing it, which is also par (above par?) for the course of McConaughey Lincoln ads. A much better ad accompanies the actor's version. This one features a real trick pool player making some clever shots to illustrate the individual features available on the luxury crossover. They're legitimately nifty shots, and the features are clearly explained. Maybe all of Lincoln's ads should have this pool player. Related Video:

Lotus Evora GT410 Sport exhaust is the best new holiday song

No matter what holidays people are celebrating, there's one winter celebration car enthusiasts can come together for: Driftmas. A Lotus Evora GT410 Sport was recently possessed by the ghost of Driftmas present Ken Block and decided to get sideways all over the Lotus campus in Hethel, Norfolk, England. The result is a beautiful winter symphony. The video is done in a slightly cheeky manner, as the yellow Evora shows up to work with a fully geared-up driver in the front seat, and a full Christmas tree stick to the rear engine cover. After blowing past a pristine Espirit S1 in a "slow" zone, the Evora slowly creeps through one of the garages, where a beautiful black and gold Type 72 race car sits quiet as a mouse. It then makes its way through a testing area and to a parking lot, where it rings a few bells around three specialty Lotus models, including what appear to be Exige Cup cars. It finishes the ride in front of the main office, where Lotus has another Christmas tree filled with little toy cars as ornaments. Before the Grinches start complaining about how it's not Gymkhana, that's correct. It's not. But we'd never turn our noses at a video with a soundtrack a sweet as this. Merry Driftmas to all. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video:

2019 Subaru Forester Drivers' Notes Review | Space with a view

The Subaru Forester, launching in the 1990s, is one of the earliest crossover models, blending SUV design and capability with car-like handling and refinement. For 2019, the Forester was completely redesigned, though it might be hard to tell. The styling is conservatively updated, and the boxy, upright design people seem to like it kept as untouched as possible. One of the bigger changes is the under-the-hood offerings. The 250-horsepower turbocharged 2.0-liter flat-4 has been dropped completely. Also, the standard 2.5-liter naturally aspirated flat-4 no longer offers a manual transmission option. On the upside, power has increased from 170 horsepower to 182, and torque increases from 174 pound-feet to 176. Editor-in-Chief Greg Migliore: I spent a couple of nights in the 2019 Forester and I generally liked it. The new gen feels fresher, without overt changes. The front end looks great. All of the sharp design lines, the now-standard LED headlights and the prominent grille work together to make a statement. Subaru, Ford and plenty of others, all seem to have taken a page from Audi's playbook of using piercing headlights and a simple yet sporty silhouette. It works. The back is not as good. The last Forester looked cleaner. This one looks like a Honda CR-V knock-off. It's tough to make rear styling in a crossover great, but the Forester went in the wrong direction. Overall, though, it's a good looking machine, stem to almost stern. Inside, the visibility is outstanding. The pillars are relatively thin and the seats are mounted up rather high. You can see out of this thing in all directions. The Forester has always had a good greenhouse feel, so I'm glad that continues. Inside is more of a mixed bag. The cabin pieces and shapes are a little cheap and odd. This one, done up in almost all black with some leather, is decent, but I'd prefer a simpler aesthetic. The boxer four is fine. It works hard to build speed, but it channels mid-range power and blasts by slower moving traffic. The Forester rides better than ever, thanks in part to Subaru's new global platform. Steering is a little light in a good way, the brakes have a solid grab and in general, I like driving the Forester. I'm more of an Outback guy, but Subaru has fortified the Forester in enough ways to keep it competitive. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Carlos Ghosn was on verge of release — so prosecutors file new allegation

TOKYO — Japanese prosecutors added a new allegation of breach of trust against Nissan's former chairman Carlos Ghosn on Friday, dashing his hopes for posting bail quickly. Ghosn and another former Nissan executive, Greg Kelly, were arrested Nov. 19 and charged with underreporting Ghosn's income by about 5 billion yen ($44 million) in 2011-2015. They also face the prospect of more charges of underreporting Ghosn's income for other years by nearly 10 billion ($80 million) in total. The breach of trust allegations were filed a day after a court rejected prosecutors' request for a longer detention of both men. The new allegation only applies to Ghosn, and Kelly could still be bailed out. A request for bail by Kelly's lawyer is pending court approval, according to the Tokyo District Court, but his release will have to wait until next week since the request was still in process after office hours Friday. Prosecutors in a statement Friday alleged that Ghosn in 2008 transferred a private investment loss worth more than 1.8 billion yen ($16 million) to Nissan by manipulating an unspecified "swap" contract. Ghosn also profited by having the company transfer a total of $14.7 million to another company to benefit himself and that company's owner, who helped in the contract manipulation, prosecutors said. Shin Kukimoto, deputy chief prosecutor at the Tokyo District Prosecutors Office, refuse to say if the two transactions were related or how Ghosn illegally profited. He also declined to identify the collaborator or whether the transactions were made overseas. Ghosn and Kelly are only charged with underreporting Ghosn's pay over five years, in violation of the Financial Instruments and Exchange Act. They have not been formally charged with an additional allegation of underreporting another 4 billion yen ($36 million) for 2016-2018, for which their first 10-day detention was to expire Thursday. Prosecutors have been criticized for separating the allegations as a tactic to detain Ghosn and Kelly longer. They say Ghosn and Kelly are flight risks. The maximum penalty for violating the financial act is up to 10 years in prison, a 10 million yen ($89,000) fine, or both. Breach of trust also carries a similar maximum penalty. The conviction rate in Japan is more than 99 percent for any crime. Ghosn was sent by Renault in 1999 to turn around Nissan, then on the verge of bankruptcy, and he led its rise to become the world's second-largest automaker.

Carlos Ghosn vows to 'restore my honor' in first remarks since arrest

TOKYO — Nissan Motor's jailed ex-chairman, Carlos Ghosn, vowed to restore his good name in court after a month in detention, Japanese public broadcaster NHK said on Friday. "Things as they stand are absolutely unacceptable," Ghosn was quoted as saying via his lawyer. "I want to have my position heard and restore my honor in court." It was Ghosn's first comment since his arrest on Nov 19 for allegedly understating his income by about half over a five-year period from 2010. He was later charged with the same alleged crime covering the past three years. A call to the office of his lawyer, Motonari Otsuru, went unanswered outside business hours early on Friday. The lawyer has previously declined to return calls for comment on the Ghosn case. A Tokyo court on Thursday unexpectedly rejected prosecutors' request to extend Ghosn's detention, which Japanese media said means he could go free on bail as early as Friday. Ghosn wants to hold a news conference after he is released, NHK quoted his lawyer as saying. The executive, who formed a carmaking alliance among Nissan, Mitsubishi Motors Corp and France's Renault SA, said he is not a flight risk and wants to be able to travel abroad, the report said. The Ghosn case has put Japan's criminal justice system under international scrutiny and sparked criticism for some of its practices, including keeping suspects in detention for long periods and prohibiting defense lawyers from being present during interrogations, which can last eight hours a day. Japan has also come under fire for its 99.9 percent conviction rate. The Tokyo court unexpectedly ruled not to extend Ghosn's detention. It said it had also decided against extending detention for Greg Kelly, a former Nissan executive who was arrested along with Ghosn on Nov. 19. It later overruled an appeal by prosecutors against the decision, clearing the way for the possible release of the two men as early as Friday. The court did not disclose reasons for its decision, and NHK said it was "extremely rare" for it to reject the prosecutors' request to extend detention. If Ghosn and Kelly are granted bail, conditions may require them to apply for permission to travel overseas. They could also be barred from contacting Nissan officials. Both executives had not been able to make any public statements since their arrest, although local media have reported that they have denied wrongdoing. Ghosn was indicted on Dec.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.

Hotter Subaru WRX STI teased for Detroit, probably the S209

We reported yesterday about Subaru filing an application to trademark the name "S209" for the U.S. Today, Subaru released a teaser video for what we think is that exact car: the WRX STI S209. In a video titled "From Japan with Love," Subaru is seen lapping Virginia International Raceway in a slightly-hotter-than-normal, camouflaged STI. At first glance, it's easy to see it as the STI Type RA from earlier this year. However, looking closer at the aero package reveals a little bit more. A side-by-side comparison between this car and the Type RA reveals prominent canards in front of the wheels, exclusive to what we'll call the S209. No such pieces exist on the Type RA. To make those canards flow into the bodywork, it looks like Subaru tacked on some fender flares surrounding the front and rear wheels. It's noticeably different from other STI variations, so we'll see if Subie keeps them for the production car. Beyond that, it's hardly any different than the Type RA in appearance. The gigantic wing is accounted for, as are the gorgeous gold wheels. Another reason we think this is the S209 is Subaru's video description. It reads, "Something special from Subaru Tecnica International is coming to America for the first time ever." The S20(X) series that started in 2000 with the S201 has been never come stateside before. This series has traditionally produced STIs that have more power, suspension and aero than your regular STI. Most recently, the S208 used a 2.0-liter turbo flat-four that put out 329 horsepower and 319 pound-feet of torque. Of course, the U.S. is still dealing with Subaru's Byzantine-era EJ25 2.5-liter flat-four. More power can be had past that engine's 305 horses it makes here now, so we'll see if that's the route Subaru plans to take. Subaru ended by saying it'll be revealing the car at the Detroit Auto Show in January. The wait won't be long for what we imagine will be the new king of Subarus in the U.S. Related video:

GM applies for 'Enspire' trademark for the second time

When we wrote about the Buick Enspire concept debut in China earlier this year, we said "we wouldn't be surprised to see either an all-new crossover, or a redesigned current model, sporting the designs seen on this concept." Now it appears General Motors might be planning to go with Option A. GM Authority discovered a trademark application for the name "Enspire," to be applied to "Automobiles, excluding motor homes." This is the second time GM filed for the name, the first being in 2015. As always, applications don't mean certainties. However, we know Buick has a range of new models in development, it's losing the LaCrosse sedan and its crossovers sell quite well. If there's to be a new vehicle called Enspire, it shouldn't be hard to guess what kind it would be. GMA's previous investigations picked up clues that there'll be two new Buick crossovers, one about the size of the China-sourced Envision and sitting on the E2 platform that supports the Cadillac XT4, Chevrolet Malibu, and Buick Regal. Based on data in an IHS Automotive document, the site said the putative Enspire's platform code is E2UB, the U for utility vehicle, the B for Buick. The other crossover would sit above an Envision, below the Enclave, on the short-wheelbase C1 platform employed by the Cadillac XT5. We can probably take the Enspire concept's design cues as a preview of the future, if not its electric drivetrain. Designers carved the wide, formidable stance with curved and elongated versions of traditional Buick brand cues, such as the grille crossbar stretching into the headlights. A futuristic, art-filled and screen-heavy interior contrasts with genuine wood, and is probably best not to look at because Buick couldn't bring anything like it to production. The electric drivetrain included a 550-horsepower electric motor and enough battery to power a 370-mile range. Those figures seem a little outlandish given the potential price tag and the Buick badge. Besides, GM has other plans for a dedicated EV powertrain in development that should bow around 2021, and a Buick EV based on the Chevrolet Bolt's BEV II architecture. As such, a conventional powertrain seems more likely for an Enspire crossover, at least initially. The same IHS Automotive document said the E2UB vehicle would go into production in Shanghai in late 2019.

McLaren P1 GTR Senna tribute car built by MSO as the ultimate P1

McLaren just finished what looks to be one of its most incredible MSO ( McLaren Special Operations) projects ever with a P1 GTR. As is obvious in the photos, this P1 GTR is meant to celebrate the McLaren MP4/4 F1 car Ayrton Senna raced to complete dominance in the 1988 championship season. There is no shortage of Senna projects going on over at McLaren, clearly. This car has been in the works for three years running, along with McLaren's actual car, the Senna. Don't be confused, however, this is a one-off P1 GTR that a McLaren collector/Ayrton fan commissioned to be built. The livery isn't the only thing that sets it apart from other P1 GTRs either. McLaren says this car has a unique engine specification. Its heat shield is made out of 24 carat gold; the rear cover is made out of Lexan (type of plastic) and it has modified engine bay shrouds. We're not told how much more power it makes, but apparently it's more than the 986 horses in your standard P1 GTR. This Senna fan managed to wrangle the McLaren engineers into designing him a bespoke aero package for the car too. It has new front dive planes, a wider front splitter, Gurney flap, new barge boards and bigger endplates on the rear wing. Even more downforce is generated by inboard secondary wing elements. A "normal" P1 GTR produces 1,433 pounds of downforce, but this car brings that up to a whopping 1,763 pounds. Yeah, it's going to stick just fine. The design and customization on this car is pretty next-level. McLaren Rocket red and Anniversary white are the same color codes used on the F1 car. Both doors have the Marlboro barcode that was used in lieu of Marlboro script when regulations changed to bar that sort of advertising. Senna branding is all over the thing, everywhere you look. The seats are actually the same ones McLaren used in the Senna (actual car) itself. Yeah, there's a whole lot of Senna going on here. With the unbelievable attention to detail and expense that went into this car, we wonder what the owner's plans are for it. Will it live at the track (we hope) as the extra power and aero suggests? Or is this something to be put away in a collection because it's just too freaking special? Call it a good problem to have. This thing is awesome. Related video:

Four Vanquish Zagatos go to one buyer with the most beautiful garage ever

Coupe, droptop, shooting brake and speedster match with Lava Red paint

Subaru files for S209 trademark in the U.S.

Last week, Subaru filed an application with the U.S. Patent and Trademark Organization to trademark "S209." The paperwork indicates Subaru would like to apply it to "automobiles, structural parts, and structural fittings therefor," and "floor mats for automobiles." An application doesn't mean anything, but the obvious deduction would be that Subaru is thinking about another special edition Impreza WRX STI for the U.S. market, one that brings a taste of JDM-only nomenclature our way. The S appellation is as serious to the Subaru Tecnica International division as STI is to Subaru overall. The STI boffins have rolled out these extra special modes since the S201 STI in 2000, the Japanese market reaping a new S harvest every couple of years. Our last distant visions of such were the S207 shown at the 2015 Tokyo Motor Show, and the S208 revealed last year. The 208 benefited from a bump in horsepower, from 323 hp to 329 hp and 319 pound-feet of torque, quick-ratio steering, a front strut tower brace, Bilstein dampers as part of a DampMatic II suspension, torque vectoring front and rear, 19-inch BBS wheels, Brembo brakes, a carbon roof, and an unmissable rear spoiler. None of the previous "S" models made it to the U.S. If this one does, we can only guess how Subaru will differentiate it from the hottest Impreza we've had, the recent Type RA (pictured). Our Type RA lost 68 pounds with the help of a carbon roof and spoiler, while a bag of engine mods and revised gearing helped make the most of unchanged 310 hp and 290 lb-ft from the 2.5-liter EJ25 engine. A power bump would likely be first on the wishlist for an S209, but it should be noted that the recent Japanese S cars have used the EJ207 2.0-liter boxer-four, not our 2.5-liter. As with the carmaker's home market, we'd expect an S209 to go into severely limited production. Subaru built 300 units of the S206, 400 of the S207, and 450 of the S208. Even if we do get a brawnier STI, Japan is likely to keep its power close with the WRX STI TC 380 teased last month, putting out 375 hp from a 2.0-liter turbocharged boxer-four. Still, the South-Africa-only WRX STI Diamond Edition rocked 349 hp and 342 lb-ft from its 2.5-liter, so there's a lot of headroom for a U.S. S209 to play with. If we get one, that is. Related Video:

Junkyard Gem: 1987 Chrysler Conquest TSi

If you feel like stumping your friends with a very trivial car-trivia question, try this one: What car model was sold in the United States with badging from Plymouth, Dodge, and Chrysler? They'll tell you it's the Neon, which was badged as a Chrysler outside of the USA, and you'll point out the "in the United States" qualification and feel smug in your superior automotive knowledge. The correct answer is, of course, the Conquest, which was a rebadged Mitsubishi Starion. Here's a Chrysler Conquest TSi, found in a Denver-area self-service wrecking yard. The TSi was the factory-hot-rod version of the Conquest, with intercooling for its 2.6-liter Mitsubishi Astron four-cylinder engine and 176 horsepower— pretty serious for 1987. For 1984 through 1986, the Conquest could be had with either Dodge or Plymouth branding; the 1987-1989 Conquests are all Chryslers. This one is rough, though the odometer shows that it never even reached 150,000 miles. Here's a Grateful Dead sticker, presumably bought on Shakedown Street at some point before Jerry Garcia's death in 1995. TURBO was a powerful word during the 1980s, so much so that the Starion/Conquest came with seat belts emblazoned with the sacred word. I still see the occasional Starion or Conquest during my junkyard travels, but the Chrysler Conquest is the rarest version these days. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Mazda3 shows off factory bodykit, Miata gets a hardtop at Tokyo Auto Salon

The 2019 Mazda3 wasn't exactly lacking in the sporty style department when it was shown last month in L.A. But everyone, including Mazda, knows that doesn't mean it can't be even sportier. As such, the company is showing off a version of the new compact hatchback at Tokyo Auto Salon, a modified car and aftermarket parts show, with a body kit. It's a subtle one, consisting of a black front lip spoiler, black side skirts, and a longer, slightly upturned rear spoiler. Its low-key design fits in well with the Mazda3's taut, clean lines, and it makes the car look lower and more purposeful. The Mazda3 isn't the only car getting some love at the Tokyo Auto Salon. The company will display an MX-5 Miata with a removable hardtop made of carbon fiber. Now, you may remember that Mazda does offer a hardtop, but just for racing drivers. That top is a bit odd looking with a really high rear-end to clear motorsports-spec roll bars and cages. This top follows the lines of the roadster's soft top, looking much more sleek. Neither sets of parts here have been announced for production, but we wouldn't be surprised to see them show up as Mazda accessories. The Mazda3 body kit in particular seems a shoe-in, since the previous generation Mazda3 had a very similar appearance package available. The Miata top certainly seems as though it was designed with regular consumers in mind. Its future is less certain, though. For one thing, Mazda can point to the Miata RF if you want a solid roof. Then again, Mazda still offered a removable hardtop for conventional Miata roadsters even after the original power-retractable hardtop model was introduced. If it does come to market, though, expect it to be made from more affordable fiberglass and be painted in factory colors. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Suzuki Jimny gets confused by American guardrails

The reborn Suzuki Jimny 4x4 has faced some crosswinds in the time it's been on the market: It earned only three stars in its Euro NCAP test due to a badly-inflating driver airbag and troubles with pedestrian protection. The automatic emergency braking function also had some issues in NCAP testing, but now the Jimny's AEB system is facing an another problem — it appears to be confused by guardrails. Two German-market Jimnys had been shipped to Los Angeles for the World Car of the Year testing, Australian journalists found that on some corners of the California test route, the AEB was seemingly triggered by a guardrail in a curve in the road. The problem was found with both Jimnys, and Suzuki's Jimny chief engineer was present to look into the matter; later, Suzuki engineers were able to replicate the glitch with these particular vehicles on the same road. While U.S. sales of the Jimny are extremely unlikely, test data acquired on American roads still seems to be highly valuable for Suzuki, as tests in Japan could not replicate the problem. It appears the road condition, tilt angle, curve aspects and vehicle speed all conspired to puzzle the AEB system, which is now being evaluated for a software or calibration change. The jerky correction by the electronic stability program, audible on the CarAdvice video, happened at 45-55 mph, which is not overly fast for even the narrow and tall Jimny — it is possible that the AEB mistook the guardrail for another car. Suzuki stated: "There is a possibility that the (stability control) is instantaneously switched on (by) reacting to the vehicle sway when departing the S-shaped curve — and then consecutively switches on because the vehicle is circling the curve at high speeds. [...] The intervention of the stability control may give a sense of discomfort to the driver but is not an event that would disturb the vehicle's direction of movement." The driver safety assists are a good addition to the Jimny, of course, given that the 1980s second-generation truck was the subject of a beef between Consumer Reports and Suzuki North America due to its reported tippiness in corners. Related Video:

Nissan CEO plans to deliver 'raw details of the misconduct' to Renault

TOKYO/PARIS — Nissan Motor's CEO plans to meet one-on-one with the deputy CEO of automaking partner Renault in Amsterdam this week, sources told Reuters, amid tensions over the future of the alliance after Chairman Carlos Ghosn's arrest last month. The meeting would be the first face-to-face interaction between Nissan's Hiroto Saikawa and Renault's Thierry Bollore since Ghosn was arrested on Nov. 19 in Tokyo. It would take place alongside regular top-level, monthly talks between the partners and Mitsubishi Motor Corp that will be held over two days from Tuesday, according to one of the sources familiar with the matter. Saikawa, who took over from Ghosn as CEO last year, is planning to discuss at the meeting with Bollore possible changes to the partnership's management and operations with an eye to continuing the alliance, another source who is close to Nissan's management said. The talks in Amsterdam could provide Saikawa with an opportunity to try and convince Renault executives of the gravity of Ghosn's alleged misconduct discovered during an in-house investigation by the Japanese automaker. They are being held a day after Saikawa rebuffed a demand from Renault for an extraordinary shareholder meeting that would have offered the French car maker a chance to weigh in on Ghosn's replacement as chairman and on other Nissan board appointments. Mitsubishi Chairman Osamu Masuko said late on Monday he will attend the Amsterdam meetings via video conference. A Nissan spokesman said Saikawa would attend meetings with alliance partners in Amsterdam from Tuesday, but declined to comment on the possibility of the one-on-one meeting with Bollore. Ghosn was charged last week alongside alleged accomplice Greg Kelly and Nissan itself over the company's failure to declare $43 million in deferred income that Ghosn had arranged to be paid while chairman and CEO. Both men remain in custody. The scandal has shaken the Renault-Nissan-Mitsubishi alliance, with Saikawa calling for changes to weaken Renault's control as he moved to oust Ghosn in the week of his arrest. Renault directors were briefed last week on the Nissan investigation that led to Ghosn's arrest but reiterated their earlier decision to keep him in office as chairman and CEO. But the Renault board has yet to be given direct access to Nissan's findings, which are being closely held by Renault lawyers answering to Ghosn's long-standing chief of staff and head of legal affairs at Renault, Mouna Sepehri.

GMC introduces off-road performance package for Sierra AT4

GMC is giving its off-road-focused Sierra AT4 pickup even more performance with some factory-installed upgrades. The package is called the AT4 Off-Road Performance Package. With it you'll get the 6.2-liter V8 engine upgrade, cat-back performance exhaust system, performance air intake and 18-inch aluminum wheels shod in Goodyear Wrangler DuraTrac tires. The upgraded performance comes in the form of extra power. Thanks to the bolt-ons, you gain 15 horsepower and 9 pound-feet of torque over the 6.2-liter in stock form. This increases output to 435 horsepower and 469 pound-feet of torque — not too shabby. This package is priced at $4,940, and available for order now. That's a hefty price for what amounts to some minimal bolt-on modifications you could easily do yourself. However, buying it through GM means you get to keep your warranty in place. The Sierra AT4 already has more off-road features than a normal Sierra 1500. You're getting a two-inch lift, four-wheel drive with two-speed transfer case, locking rear differentials, skid plates, Rancho off-road shocks and hill descent control. Both the wheels and tires are available as options already, but this package just bunches related stuff together. It'll be up to you to decide if an exhaust and intake are worth the extra dough. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Steve McQueen barn find: Movie Trans Am surfaces after almost 40 years

An important Steve McQueen film car has emerged from barn storage. No, it's not yet another " Bullitt" Mustang, quite the contrary: The car in question is a 1980 Pontiac Trans Am, and it starred in McQueen's final film, " The Hunter." In the movie, McQueen plays a bounty hunter, and while in " Bullitt" he's quite the wheelman, that's not the case in this one. McQueen's character, "Papa" Thorson, is a horrible driver, and the Trans Am is far too much car for him. A chase sequence sees McQueen driving a combine harvester to catch the perps who are driving his stolen rental Pontiac, and the Trans Am ends up blown in half with dynamite, then returned to the airport on a trailer. The driver of said GMC truck and trailer combination, Harold McQueen (no relation), received the title of the first car used in filming, and for the following decades planned to fix the now-ruined car, but never got around to it. Instead, the 1,300-mile Pontiac wreck sat on a farm for nearly 40 years, until Harold decided to sell it to an enthusiast. There's studio documentation proving the car's pedigree, and stunt modifications can be seen in the Pontiac's floor and dash. While it's obviously in dreadful condition, the car remained more intact than the other stunt car the film crew blew up even more spectacularly — that car ended up as the pile of parts in the airport scene, and those bits and pieces were eventually dropped off at a junkyard after a Pontiac dealer refused them. McQueen did also drive a 1951 Chevrolet in the film, and kept that yellow convertible after filming was wrapped up. Sadly, he was diagnosed with cancer just a month later, after reportedly being in poor health during the shooting, and passed away in December 1980. The yellow Chevy stayed with his estate for some years, later getting restored and auctioned. Right now, it's not clear what the Trans Am's fate will be. The car's current owner, Calvin Riggs from Carlyle Motors in Katy, Texas, wants to know more about the Trans Am and the film shoot: His post on Hemmings includes a lot of information, but more would be useful. Related Video:

Lincoln Continental suicide doors: A lot has changed since 1961

It looks like we've hit peak Lincoln Continental for the 21st century with the Coach Door Edition. At least, 80 people will be enjoying the best that Lincoln (and Cabot Coach Builders) can offer. We figured now was a perfect time to look back at the original Continental with suicide doors, now that there's a return to form. Make sure to scroll through the barrage of historical Continental photos Lincoln provided to us from its archive above. Lincoln was aiming to offer a design throwback to the 1961 Continental with its return to suicide doors. Back then, Lincoln wanted a car to compete with GM's " Standard of the World," ergo Cadillac. The goal was to make a car so enticing that people might want to buy a Lincoln instead of a Cadillac as their next luxury-mobile. It never stomped down Cadillac, but the Continental made a strong statement. Sales spiked at 54,755 Continentals in 1966 – Cadillac sold 196,685 cars that same year. For nine years (1961-1969), Lincoln made the Continental with suicide doors as the only option (barring the two-door coupe introduced in 1966). The car was offered as a four-door convertible or hardtop for most of the suicide-door generation, but the convertible was dropped after 1967. It was the droptop that was most iconic, and the car many of us picture today when thinking about that Continental. The pillar-less look of the Convertible with the top removed and the doors swung wide exudes class and luxury. This generation of Continental appeared in movies like "James Bond's Goldfinger", and more recently in "The Matrix." Celebrities owned them back in the day. Who doesn't want to exit their large convertible through suicide doors onto the red carpet, right? 2019 Lincoln Continental Coach Door Edition View 51 Photos Obviously, Lincoln wanted the normal Continental released for model year 2017 to take the world by storm. As rumors swirl of its untimely death after 2020, it's safe to say the new Continental hasn't exactly done that. What if it had suicide doors to begin with? Would we have been looking at the next Mercedes beater? Probably not. But still, we would have been blown away if that's what Lincoln showed us at the 2016 Detroit Auto Show. Maybe those in the market would have been too. The new Continental with suicide doors serves an entirely different purpose than the original. Producing only 80 of them makes sure of that. Maybe a few celebrities will buy one, but this one won't have the same cultural impact of the old.

2019 Hyundai Santa Fe can be unlocked and started with a fingerprint

Hyundai has unveiled a system that lets drivers unlock and start a vehicle using their fingerprints. The tech is built into the door handle and ignition button of the new 2019 Santa Fe SUV, showcased at an auto show in China last week. Multiple owners will be able to register their encrypted fingerprint data for the same vehicle, according to the South Korean automaker. And, depending on the person, the car will then automatically adjust seat positions and the angle of the rearview mirrors. A future update could also allow the biometric system to add personalized temperature, humidity, and steering settings, Hyundai said. For now, the company is planing to limit the feature to China upon its launch in the first quarter of 2019. The original report on the feature in the Korea Herald says users can unlock or start the car "without keys," but it's unclear whether that means it can be used in complete absence of the car's key fob. Related: In China, your car could be spying on you for the government The fingerprint sensor uses human capacitance to pull off the trick, differentiating between the electricity levels in different parts of the finger to prevent hacking or faked fingerprints. Hyundai said the system — which receives your encrypted fingerprint data from the touch sensor in the handle before unlocking the car — has an error rate of 1 in 50,000. (That's the same figure touted by Apple for its Touch ID tech for iPhones, iPads and select MacBooks.) The Santa Fe's other tech includes a rear occupant alert system, which uses ultrasonic sensors to detect the movements of children in the back to avoid anyone being left behind. The car also comes equipped with Chinese internet giant Baidu's voice recognition system and a wireless phone charger. This isn't the first time fingerprints have been used to start cars, but the unlocking tech has never before been baked in to a vehicle's door handle. Tesla Model 3 owners are also already using their smartphone as a car key while the rest of the industry (including Hyundai) is busy building a virtual smartphone key standard that could popularize the tech. Elsewhere, Hertz recently brought biometric data to car rentals at Atlanta International Airport.By Saqib Shah for Engadget.Related Video:

Nissan board meets but doesn't pick a replacement for Ghosn

YOKOHAMA, Japan — Nissan's board met Monday but failed to pick a new chairman to replace Carlos Ghosn, who was arrested last month on charges of violating financial regulations, saying more discussion was needed. Nissan Motor Co. Chief Executive Hiroto Saikawa told reporters that the board approved a special committee of outsiders to strengthen governance at the company. A date for the selection of a chairman was not decided. "We plan to be cautious in this process, and I do not plan to rush this," Saikawa said. The recommendations for beefing up governance are due in March, and Saikawa said he was willing to wait until then to choose a chairman. The board meeting came amid an unfolding scandal that threatens the Japanese automaker's two-decade alliance with Renault SA of France and its global brand, and highlights shoddy governance at the manufacturer of the Leaf electric car. Related: Carlos Ghosn coup theory grows: Did Nissan set him up for a fall? Ghosn and another board member Greg Kelly were formally charged last week with falsifying financial reports in underreporting Ghosn's income by about 5 billion yen ($44 million) from 2011 to 2015. They were arrested Nov. 19 by Tokyo prosecutors and remain in detention. A source close to Ghosn's family says Ghosn is innocent, as the alleged income was never decided upon or paid. Aubrey Harwell, the U.S. lawyer for Kelly, an American, says he is innocent, and that Nissan insiders and outside experts had advised him that the financial reporting was proper. The chairman must be selected from among the board members. Three outside board members — race-car driver Keiko Ihara; Masakazu Toyoda, an academic; and Jean-Baptiste Duzan, formerly of Renault — are making that decision. The special committee for governance includes the three outside board members and four other outsiders, including former judge Seiichiro Nishioka. One candidate for chairman is Saikawa, who was hand-picked by Ghosn to succeed him as chief executive. He has denounced Ghosn and Kelly as the "masterminds" in a scheme to falsify income reports and abuse company money and assets. Renault has kept Ghosn as chief executive and chairman, saying its investigation has not found wrongdoing in the awarding of Ghosn's compensation. Saikawa called on directors at Renault to heed its reasons for sacking Ghosn, but Renault's interim chairman Philippe Lagayette said on Friday that its board had not considered a replacement.

Lincoln Continental brings back suicide doors with Coach Door Edition

Remember that teaser image from last week indicating the Lincoln Continental would get suicide doors? Well, it's happening, and we got to check out a prototype late last week. As you can see from the photos, the vehicle is essentially a stretched Continental with rear doors that latch forward. Lincoln doesn't call it the suicide door edition, of course. No, the proper name is 80th Anniversary Coach Door Edition. Semantics aside, the car is here to pay homage to the suicide doors of the 1960s Continental and celebrate 80 years since the original Continental was introduced. That's the why; now here is the how. To build this special edition, a Continental begins life as a normal Black Label model, and leaves the factory with normal doors intact. From there, Lincoln ships the car to Cabot Coach Builders in Massachusetts for the stretch and other modifications we'll get into later. Before you start cursing Lincoln for not really screwing together a suicide door Continental, know this: Lincoln engineered all the components, metalwork and everything else that goes with the build. It then gives the car and components to Cabot for the fabrication work. So yes, somebody else is doing the conversion, but you're still getting a Lincoln-engineered vehicle. Make of that what you will. Cabot has done work for Ford before with the MKT and Transit Van, but Lincoln says it's much more involved in this build than it ever was before. To begin, the Continental gets a six-inch stretch. It was a relatively long car before, but boy does this thing look like it's lounging now. That's exactly what you'll be doing once inside those suicide doors. Lincoln claims best-in-class legroom, and yes, to our eye that is surely accurate. Someone well over 6 feet tall could easily stretch all the way out and still have room to spare back there. The only problem we noticed? Headroom. A sloping roofline combined with seats that are well pushed back doesn't leave a whole lot of space up there. It looks like Lincoln noticed this and carved out little spaces in the headliner, but it might not be enough for those who are closer to the sky than most. A flow-through center console occupies space where the middle seat would typically be. This has all sorts of controls for things like audio and climate control. Lincoln said the one we sat in wasn't entirely finished with all the features and electronics that will be included.

2020 Hyundai Palisade Preview Drive | The bigger they come

SEOUL — Hyundai can build big, spectacular things. In 2014 it created the CSCL Globe, the world's largest container ship at the time. With a 77,200-hp two-stroke engine and a deck the size of four soccer fields, it can deliver 19,000 shipping containers anywhere in the world. By comparison, the new 2020 Hyundai Palisade isn't all that large — but it will soon become the brand's biggest and most powerful SUV ever. About the size of the Ford Explorer and the popular Honda Pilot, the Palisade is already on sale in South Korea, where it is assembled at Hyundai's massive plant in Ulsan alongside the Tucson, Ioniq and Veloster. But the replacement for the Santa Fe XL won't hit Hyundai's American dealerships until summer 2019. It's part of an SUV onslaught by the automaker, which has just introduced the smaller Kona and Santa Fe models. And Hyundai says there's more to come. Unlike the Ford Explorer, which will soon return to a traditional rear-wheel drive architecture, the 2020 Hyundai Palisade uses a new front-wheel drive chassis it will share with the coming Kia Telluride. The SUV is 3 inches longer, about 3.5 inches wider and over 2 inches taller than the Santa Fe XL, and its wheelbase has grown 4 inches. That matches the Nissan Pathfinder at 114.2 inches, and outstretches the Explorer, Pilot and Toyota Highlander. However, the Chevy Traverse and Buick Enclave share a 120.9-inch wheelbase, and at 204.3 inches long they've got 8 inches of length on the Palisade. Despite all that size, the Palisade doesn't feel like a container ship from behind its leather-wrapped steering wheel. After two cold snowy days driving Korean-market spec Palisades around northern South Korea, both on and off road, we flew home to California impressed by the SUV's dynamics, packaging and comfort. Inside, the Palisade's front seats are firm with significant bolstering, and the seating position is perfect. Hyundai has gotten the details right, even carving the SUV's A-pillars extra thin to better your forward view. Fit and finish are impressive, coming close to Genesis levels with our test car's quilted Nappa leather, suede headliner and knurled knobs. Its pale striped wood trim, although fake, pulls off the yacht feel SangYup Lee, Hyundai's Head of Global Design, says he was going for. By the way, before joining Hyundai, Lee was the lead designer at Bentley, where he created that company's first SUV, the Bentayga.

Aston Martin working on an inline-six to replace Mercedes-sourced V8?

There's no straight line to figuring out whether Aston Martin plans a straight-six motor for future products. In March, comments by the automaker's chief engineer for vehicle attributes, Matt Becker, led many to believe the British firm could use the Mercedes-AMG 3.0-liter hybridized inline-six from the new CLS53. A week later, Becker said his comments had been misconstrued, that he "was speaking in more general terms that we might have to one day look at downsizing engines." Autocar just threw a new curve, citing "a source close to the firm" to report that Aston Martin's working on its own straight-six. The English outlet says the deal Aston Martin signed with Mercedes-AMG was a stopgap deal while Aston Martin worked on proprietary engines. The report says the inline-six developed in Gaydon would eventually replace the 4.0-liter twin-turbo V8 currently powering the DB11 and Vantage. If this purported inline-six were augmented with electrification, perhaps developed with help from the electric Rapid E program, it could make more sense of Becker's first, misconstrued comments. At the time, Becker said the Mercedes hybridized engine "could fit with the brand in the future." Taken generally, he could have meant an Aston Martin version of the German engine. The certainty is that there's a six-cylinder coming for larger-volume series production models, yet the reports and denials put competing rumors and powerplants in play. Aston Martin installs a 5.2-liter V12 in the DBS Superleggera, and Autocar suspects an inline-six could be derived from that engine. The automaker already has a six-cylinder in development, though, that being the turbocharged hybrid V6 said to be headed to the Ferrari- and McLaren-fighting Valhalla. Creating two new six-cylinder engines in different formats seems an odd choice for a tiny manufacturer. What about the rumors that say the DBX crossover could get a six-cylinder? In July, when Motoring asked chief creative officer Marek Reichman about it, he said the DBX "could [use a Mercedes-sourced six-cylinder], because that would be a pretty good engine and combination. Potentially." Autocar suggests, however, that the DBX will be first in line for the in-house inline engine. Aston Martin has a storied history with the inline-six, all of them with links to other automakers. The legendary inline-six in the original DB cars of the mid-20th century were originally drawn up by Walter Owen Bentley - yes, that W.O.

Junkyard Gem: 2006 Chrysler PT Cruiser Route 66 Edition

The world has fallen out of love with the Chrysler PT Cruiser, the small truck (legally speaking, it was a truck by American government definition) that started with off-the-shelf Neon chassis components and added a retro-looking roomy body. In its heyday, though, the PT Cruiser looked cool and different, and sold very well for the better part of its 2000-2010 production run. Chrysler sold some special-edition PT Cruisers, most of which seem to have disappeared without a trace, but I managed to catch this discarded '06 Route 66 Edition in a self-service wrecking yard in Charlotte, North Carolina. The Route 66 Edition came in either black or yellow paint, with yellow brake calipers and these Route 66 badges. PT Cruisers with manual transmission are surprisingly easy to find in junkyards (the manual was significantly cheaper than the automatic), but this is a luxurious two-pedal version. This one had already been hit hard by parts shoppers, who took most of the front body components and a big chunk of the interior. Note the kicky yellow dash trim. The PT Cruiser, being classified as a truck, didn't have to pass the stricter emission-control and crash standards the US federal government applies to cars. That made it a good bargain when it came to capacity-per-dollar for buyers. Eventually, though, the American public tired of the onslaught of faux-retro-styled PT Cruisers (and Chevy HHRs and Volkswagen New Beetles), and now the resulting low resale value of used PT Cruisers sends them to the wrecking yards in record numbers. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Exercise your right foot! Related Video:

2019 Hyundai Kona Electric starts under $30,000 with tax credit

The vital final detail to the 2019 Hyundai Kona Electric is here: pricing. The base model starts at $37,495 before the $7,500 federal tax credit, meaning that with the credit, it starts at $29,995. That just happens to be the same as Chevy Bolt EV. Well, now at least, as the tax credit is likely going to run out in the next few months for GM and the Bolt EV. Once GM has sold 200,000 electric cars, the credit will drop to $3,750 for six months, and then to $1,875 for six more months, and nothing after. In addition to having a base price that matches the Chevy Bolt EV, the Hyundai Kona Electric has a few choice features that makes it an even more attractive deal. The Kona has a range of 258 miles, 20 more than the Bolt EV's 238 miles. The Kona also includes DC fast charging capability as standard. To have that feature on the Bolt EV, you'll have to shell out an extra $750. The Bolt EV does have an advantage over the Kona Electric, though: it's available everywhere, right now. The Hyundai Kona Electric will start hitting dealers early in 2019. Unfortunately, it will only be available in western and northeastern states with zero-emissions vehicle criteria. They're also states with drivers more likely to embrace electric cars. Hyundai hasn't announced release windows for other U.S. states. Related Video:

MoMA displays a classic Fiat 500 at its Good Design exhibition

The original, rear-engined Fiat 500 is a design icon thanks to its distinctly recognizable rounded shape and diminutive size. Millions were made from 1957 to 1975, plenty survive, and the car has received not one but two revivals, first in 1991 in the form of the literally named Cinquecento and then with the 2007-present, retro-styled "Nuova" 500. But it's the original that's still worth celebrating, and a new exhibition at New York's MoMA museum is doing just that. The industrial design exhibition, The Value of Good Design, displays an F series 500 as an "expression of form following function." The rear-engined 500 of 1957 was well-timed as Italy rose from the ruins of war and families needed an affordable car that could fit four -- and the 500's spacious packaging was found handy enough to warrant strong sales. And choosing a 500 didn't mean you would need to give up style, especially as a folding fabric roof made the 500 good for sunny weather outings as well (while also saving a bit of steel). Recently, Fiat's small-car know-how has been in the spotlight at various exhibitions. At the Grand Basel show in Switzerland, Italian design professor Paolo Tumminelli celebrated a beat-up, original Fiat Panda as "The very last car made for people, the last surviving witness of a time when the car was still serving humans -- and not the other way around." That is certainly true of the 500 as well, along with its successors, the 600 and 126 models. The below promotional Fiat video from 1957 shows just how cool the 500 was when it was new. MoMA's The Value of Good Design runs from February 10 to May 27. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Cadillac Escalade spied for the first time

Cadillac is expanding its crossover and SUV range with a new three-row XT6, but that doesn't mean it has forgotten about the one that started it all. As seen in the above photos, the company is testing a new version of the Cadillac Escalade. It's well-covered, but there are a number of details that we can make out. We'll get to what we can see of the design in a bit, but the big news is the suspension. Like the new Tahoe we previously spied, the 2020 Cadillac Escalade will have an independent rear suspension replacing the solid axle set-up that GM's full-size SUVs have always possessed. Its rivals from Ford/Lincoln went independent long ago. We can't underline enough how much of a difference this will make. Handling should be less cumbersome and the ride will be smoother and less prone to jiggling over bumps. It would be improved even further if Cadillac continues to offer magnetically controlled shocks as standard. Inside, the third-row should be positioned lower, thus lowering the current sky-high load height and resulting in a third-row that's actually habitable. In other words, the Escalade won't be so archaic. You can see the visual differences between the new (top) and current (bottom) designs below. Now, as for the design, our best clue to the new Escalade's design is in the grille. The flashy slatted chrome grille of the current model is gone and in its place a more modest mesh grille with little studs pushed to the front. It's very much like the grille found on the new CT6 and XT4. Also, like those two vehicles, the headlights appear to have more horizontal elements than the very vertical examples on the current Escalade. The rest of the SUV is harder to make out. The profile is very similar to the current one, and will surely be shared with the Chevy Tahoe and Suburban and GMC Yukon models. The rear features new rectangular exhaust tips nestled into the rear bumper. The taillights will likely continue to stretch up the rear pillars. Like the suspension, the Escalade will continue to be generally mechanically the same as the aforementioned Chevy and GMC versions, albeit with the best parts standard. The updated 6.2-liter V8 with Dynamic Fuel Management first introduced on the Silverado and Sierra will likely be the standard engine. It will then be paired with the 10-speed automatic transmission. With the new Navigator so widely impressing in reviews and in sales, this new Cadillac Escalade will have to step it up.