Blog

A Mazda Miata with a Hellcat V8 exists, and it can be yours

Mazda Miatas with V8 swaps aren't unusual. Kits are available to drop in LS V8s from GM, and some even let you drop in an old Ford 5.0-liter V8. But a Miata with a Hellcat V8 is something special, and this one can be yours. As Automobile spotted, it will go across the block at the Barrett-Jackson Las Vegas auction. This particular 1999 Miata has a build history you can check out for yourself, too. It was all chronicled on YouTube channel KARR. Obviously the Hellcat engine does fit between the wheels, but the hood had to be cut open for the intake manifold and supercharger to fit. The front bumper and lights have been changed to the 2001+ NB Miata design. According to the listing, it has suspension components from V8 Roadsters, a company that specializes in Miatas with twice the normal number of cylinders. In the middle of the car is a manual transmission, which connects to a Ford 8.8-inch differential that's been welded up. With that much power and an essentially locked rear diff, it should make for an excellent drift car. Fortunately it also has 10-inch wide wheels for more grip, and upgraded Wilwood brakes to stop it. It will go for auction at Barrett-Jackson's Las Vegas event, which runs Oct. 3-5. There is no estimated price for the car, which is understandable since nothing like it has crossed the block before. It will go to a new owner, whatever the price, as it is being listed as "no reserve." So if you want to win burnout contests or get loads of stares at next year's Woodward Dream Cruise, you could do a lot worse than picking up this tiny monster. Aftermarket Dodge Mazda Convertible Performance Hellcat

Nissan and Carlos Ghosn settle SEC claims over undisclosed compensation

WASHINGTON — Nissan and its former Chief Executive Carlos Ghosn have agreed to settle claims from the U.S. Securities and Exchange Commission over false financial disclosures related to Ghosn's compensation, an SEC statement said on Monday. Nissan will pay $15 million, while Ghosn agreed to a $1 million civil penalty and a 10-year ban from serving as an officer or director of a publicly traded U.S. company, the SEC statement said. Ghosn was arrested in Japan and fired by Nissan last year. He is awaiting trial in Tokyo on financial misconduct charges that he denies. Former Nissan human resources official Gregory Kelly agreed to a $100,000 penalty and a five-year officer and director ban. Nissan, Ghosn, and Kelly settled without admitting or denying the SEC's allegations and findings. The SEC said in total Nissan in its financial disclosures omitted more than $140 million to be paid to Ghosn in retirement — a sum that ultimately was not paid. The SEC also accused Ghosn in a suit filed in New York that he engaged in a scheme to conceal more than $90 million of compensation. That suit is being settled as part of the agreement announced Monday. Nissan confirmed it had settled the allegations and said it "is firmly committed to continuing to further cultivate robust corporate governance." Nissan provided significant cooperation to the SEC, the agency said. The company now has a new governance structure with three statutory committees — audit, compensation and nomination — and has amended its securities reports for all relevant years. The SEC said beginning in 2004 Nissan's board delegated to Ghosn the authority to set individual director and executive compensation levels, including his own. The SEC said "Ghosn and his subordinates, including Kelly, crafted various ways to structure payment of the undisclosed compensation after Ghosn's retirement, such as entering into secret contracts, backdating letters to grant Ghosn interests in Nissan's Long Term Incentive Plan, and changing the calculation of Ghosn's pension allowance to provide more than $50 million in additional benefits." "Investors are entitled to know how, and how much, a company compensates its top executives. Ghosn and Kelly went to great lengths to conceal this information from investors and the market," said Stephanie Avakian, co-director of the SEC's Division of Enforcement.

Jaguar F-Type's next generation could be mid-engined

Jaguar's heritage is built on sports cars powered by a big, front-mounted engine covered by a long hood. The F-Type perfectly fits into this mold, but the company is ready and willing to set tradition aside in order to inject more performance into its next two-door model. Ian Callum, Jaguar's former design director, told Autocar that he had worked with Julian Thomson, his successor, to outline what the next F might look like, and the Chevrolet Corvette's recent transformation seemingly inspired them. His proposal calls for moving the engine from directly in front of the firewall to right behind the cabin. Making the F-Type mid-engined would shift its proportions in a wider, lower, and more aggressive direction. Sound familiar? It will if you've kept up with Jaguar news over the past few years. "We could get quite close [to the C-X75]," Callum said. The jet turbine-powered, James Bond-fighting C-X75 concept released in 2010 was on track for production, but it was canceled at the last minute. Callum's comments confirm there is still a small but vocal group of engineers in Jaguar's research and development department who want to see a mid-engined coupe join the company's portfolio. Whether such a model will appear is up in the air. Callum retired to form his own design firm a few weeks ago, so the F-Type's fate is no longer in his hands. He added that the option of making the second-generation model another front-engined, rear-wheel drive two-door is still on the table. The current F will soldier on for another three years after receiving significant updates for the 2021 model year, so Jaguar will need to decide whether to stay the course or shift to a mid-engined configuration relatively soon. Either way, enthusiasts will be pleased to hear the F-Type will return.

Hyundai and Aptiv enter self-driving joint venture

Hyundai Motor Group and Aptiv are creating a 50:50 autonomous driving joint venture valued at $4 billion. In an announcement, Hyundai said the venture plans to begin testing fully driverless vehicle systems in 2020 and to "have a production-ready autonomous driving platform available for robotaxi providers, fleet operators, and automotive manufacturers in 2022." Under the terms of the agreement, Hyundai Motor Group affiliates Hyundai Motor, Kia Motors and Hyundai Mobis — which debuted the self-driving concept vehicle seen above earlier this year at CES — will collectively contribute $1.6 billion in cash and $0.4 billion in vehicle engineering services, R&D resources and access to intellectual property. Aptiv, which was formerly known as Delphi Automotive, will contribute its autonomous driving technology, intellectual property, and approximately 700 employees focused on the development of scalable autonomous driving solutions. According to a statement on the joint venture, Aptiv says it currently operates more than 100 self-driving vehicles, a number of which are part of a commercial deployment in Las Vegas. The company says it has provided more than 70,000 paid autonomous rides and has maintained a rating of 4.95-out-of-five stars. The company will be headquartered in Boston and have so-called technology centers located across the United States and Asia. Green Hyundai Kia Transportation Alternatives Technology Autonomous Vehicles aptiv

Lexus sails the seas in luxury with its first-ever yacht

Lexus is taking its pursuit of luxury lifestyle offshore with a production version of its LY 650 yacht, revealed in Boca Raton last week. Now one can have an oceangoing Lexus to go with the LC 500 parked in the garage. Based on its Sport Yacht Concept revealed in 2017 and announced for production last year, the 65-foot yacht was developed with and built by Marquis Yachts LLC, which also adopted Toyota's latest manufacturing and quality assurance methods. The LY 650's styling was cooperatively penned with Nuvolari Lenard, which designs luxury yachts. Lexus and its partners designed the LY 650 with a high-tech hull that's a combination of lightweight but rigid CFRP (carbon fiber-reinforced plastic) and GFRP (glass fiber-reinforced plastic), to reduce weight without sacrificing structural integrity. The LY 650 is powered by dual Volvo Penta IPS1350 marine engines making 1,000 horsepower each, or buyers can choose 800 or 900 hp engines instead. The ship's master can even operate the LY 650 with a new LY-Link smartphone wireless connectivity system that controls the boat's functions and uses real-time information to assist navigation. Keeping seafarers entertained is an integrated Mark Levinson Surround Sound audio and entertainment system designed specifically for the LY 650 to offer "concert hall-like" acoustics in the main deck's salon. There are three decks: topside with secondary controls, salon on the main deck, and three cabins below that sleep six. "The LY 650 symbolizes the challenge taken by Lexus, which aspires to be a true luxury lifestyle brand, to venture beyond the automobile. A collaborative team between Toyota and Marquis Yachts introduced the Toyota Production System to the boat manufacturing facility to improve productivity and quality,” President Akio Toyoda said in a statement. “This allowed the Lexus "CRAFTED" philosophy of anticipatory hospitality and meticulous attention to detail to become a reality in the form of a luxury yacht. I am truly looking forward to seeing the advanced, high quality LY 650 display its beauty on the oceans across the globe. As a mobility company, we are pursuing new possibilities for mobility even on the sea." Lexus is not the only luxury automaker to hear the call of the sea: Porsche created a yacht, and there's a Bugatti Chiron sister ship along with the Mercedes Silver Arrow. Even Henrik Fisker has dabbled with yacht design.

Lamborghini Sian's supercapacitor hybrid system explained by company's CTO

"We are a game-changer and a provocateur," Lamborghini's CTO, Maurizio Reggiani told Engadget. The automaker has a long history of making waves with traffic-stopping designs and more recently, innovative tech. At last week's Frankfurt Motor Show, the Italian company unveiled its Sian hybrid supercar. But it ditched the traditional battery pack in favor of a supercapacitor to power an electric motor, which is exactly what you would expect from the Italian company. Typically a hybrid uses a lithium-ion battery pack to store energy. Then when needed, it transfers an electrical current to a motor (or motors) to either help the gas-powered engine or take over propulsion entirely. It's a recipe that has successfully improved gas mileage and sold over six million examples of the Toyota Prius, not to mention countless other hybrids. "It's too easy to follow," Reggiani said. "If you want to move for the first time in electrification you must guarantee that the implementation will not destroy the DNA of a car and brand." With that in mind, the automaker went with a supercapacitor instead of a battery. According to Reggiani, the supercapacitor offers up three times the power of a battery pack from the same weight and packaging. Plus, it stores and discharges energy much quicker. The spent power can be fully regenerated very quickly during normal braking. Reggiani explained that this could be particularly useful while cornering. Going into a corner, the driver applies the brakes and replenishes any spent energy. Then, as the driver accelerates out of the corner, all the available power is there for acceleration. Then as the driver brakes for the next curve, the process starts all over again. Plus, the supercapacitor doesn't have to cool down like traditional battery, it's just ready to go at all times -- which is exactly what Lamborghini owners want. The output of the 48-volt motor installed into the gearbox is 34 horsepower which brings the total power output of the V12 Sian to 819 horsepower. While 34 horsepower doesn't seem like much, it means the vehicle can do zero to 62 miles per hour in under 2.8 seconds. That's Tesla Model S Performance and Porsche Taycan levels of fast. But there are other benefits. The electric motor reduces the torque hits of the gears shifting. You know those momentary losses -- then explosions of power -- you feel in the car as it speeds up, that's the vehicle going through its gears.

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

Andy Wallace reveals the Bugatti Chiron was still accelerating at 304 mph

Bugatti retired from chasing speed records after it became the first automaker to break the 300-mph barrier with a production car. Andy Wallace, the British pilot who was behind the wheel during the record-setting run, told Autoblog the Chiron's W16 engine wasn't out of breath at 304.77 mph. "I don't think that's the v-max of the car, because it was still accelerating. At that speed, you cover a kilometer about every seven seconds. Then, of course, at the other end you need some distance — not necessarily time, but quite a lot of distance — to get the car down to the right speed for the banking," Wallace remembered. He added that, in hindsight, he might have been able to keep his foot on the throttle for about one more second before hitting the brakes. That wouldn't have been enough to cross the symbolic 500-kilometers-per-hour (310-mph) threshold, but it would have added about another mile per hour to his record. "We need less drag or a longer road to go faster," he explained.   "The track is being resurfaced, and there's a joint in the road that's not quite as flat as it should be. The team was joking with me — people said, 'I can't feel it in a normal car.' Hit it at [277 mph], and it becomes a big jump." Reaching speeds planes normally take off at, while keeping a car securely planted on its four wheels, is more difficult than sitting behind the wheel, buckling up, and flooring it. It requires a considerable amount of preparation. Wallace worked closely with Bugatti's engineering team, Michelin, and Dallara, among other partners, before attempting to set a speed record. Wind tunnel testing and computer simulations played a significant role in making the run possible and successful, but there are some factors the team didn't find out about until the car went around the Ehra-Lessien test track for the first time. Wind was one; another was what Wallace called a jump. "The track is being resurfaced, and there's a joint in the road that's not quite as flat as it should be. The team was joking with me — people said, 'I can't feel it in a normal car.' Hit it at [277 mph], and it becomes a big jump. It's a ramp. The car goes completely up on its suspension, and you land with a wobble. Once you've done that and you're not in too much trouble, it gives you great encouragement to stay flat for the rest of it," he told Autoblog. When asked how long it will take for someone to break his record, Wallace pointed out that nothing stands still these days.

2020 Honda CR-V Hybrid vs other hybrid crossovers | How they compare on paper

The long-anticipated 2020 Honda CR-V Hybrid was announced yesterday, and although we don't have every spec available (including the all-important official fuel economy figures), Honda provided enough that we can piece together a comparison of powertrain specs and dimensions. The same can be said of the 2020 Ford Escape Hybrid, which we just drove for the first time.  Together, they represent a significant increase in the number of compact crossover hybrids, as the current total is one: the 2019 Toyota RAV4 Hybrid. The old Nissan Rogue Hybrid has been discontinued, leaving the subcompact Kia Niro Hybrid as the only other vehicle in the ballpark. As you'll see below, its size and performance are much different than the others, but its fuel economy and price are superior.  Performance The RAV4 Hybrid is the performance champ of the group, but both it and the new CR-V Hybrid are actually more powerful than their respective gas-only siblings. Although the added weight of its battery pack negates much of that horsepower advantage, the RAV4 Hybrid's subsequent acceleration is indeed a smidge quicker than the gas-only version. It will be interesting to see if that's the case with the CR-V. By contrast, the Ford Escape offers a 250-horsepower 2.0-liter turbo engine, meaning the hybrid variation is most definitely not the Escape's highest-performance offering. Nevertheless, the Hybrid does produce more power than the base 181-horsepower 1.5-liter three-cylinder. The Niro, meanwhile, brings up the rear in terms of performance, but Kia estimates a perfectly acceptable 0-60 time of 8.6 seconds. The others are likely in the mid-7-second range. Fuel economy This is ultimately an open question since we don't have official figures for the CR-V and Escape. Based on Honda's estimate of the CR-V Hybrid being 50% more efficient in the city than the gas-only version, our calculators say it should get 43 mpg in the city. Then, based on information provided on the Escape Hybrid first drive and some more calculation, our best guestimate for it is 40 mpg. Either way, given how mpg is calculated, any potential differences between them in terms of actual fuel burned should be negligible.  On the other hand, most Kia Niros sold get 51 mpg in the city and 49 mpg combined. According to the EPA, that translates to an annual average fuel cost of $750. The RAV4 Hybrid, by contrast, is $900.  FWD vs AWD Note that the CR-V and RAV4 come standard with all-wheel drive.

Bugatti to build composite, carbon fiber, and aluminum versions of Baby II

At the 2019 Geneva Motor Show, Bugatti announced the revival of one of the most unique cars in the company's storied history: the Baby. At the time of the announcement, the project was still in its infant stages, and the only available example was a 3D-printed model. Still, that didn't stop buyers from reserving all 500 examples of the Baby II within three weeks. Months later at its 110th anniversary celebration in Molsheim, France, Bugatti showed the first functioning prototype, which special VIPs were allowed to test drive. Dubbed "XP1", this prototype is the result of a collaboration between Bugatti and The Little Car Company. Bugatti wanted to make a modern and more accessible version of the Baby, which itself is modeled after a different legend, the 1924 Type 35 Lyon Grand Prix car. Although the original Baby was half scale, Bugatti set out to build a three-quarter-size model that could fit not only kids but certain adults, as well.  In building the Baby II, Bugatti tried to replicate as much as it possibly could to bring the Type 35's essence back to life. Some of the coolest features include a hollow front axle, eight-spoke wheels (which now have Michelin tires), the four-spoke steering wheel, a turned aluminum dashboard with a clock "used for measuring race performance," and a digital recreation of the fuel pressure gauge. Although French Racing Blue was used for the prototype, Bugatti says the Baby II can be painted in modern colors from the Chiron range or from vintage colors that are tied to specific racers or events from the company's history. The Baby II, which is rear-wheel drive and has a limited-slip differential, can be ordered with either a 1.4-kWh lithium-ion battery pack or a 2.8-kWh pack, which is expected to have a range close to 20 miles. Those packs will feed an electric powertrain that can be set to 1-kW Child Mode that can reach about 12 mph or or 4-kW Adult Mode, which can reach up to 28 mph.  Possibly the most interesting news at the launch is detailing about three different available versions of the Baby II. The base Baby II will be crafted with a composite body, the Baby II Vitesse will have a carbon fiber body, and the Baby II Pur Sang will wear a hand-built aluminum body.

2020 Fiat 124 Spider Abarth gets ‘Scorpion Sting' appearance package

There’s currently a cloud of uncertainty surrounding much of the Fiat lineup, and especially the 124 Spider after the brandÂ’s CEO, Olivier Francois, was recently quoted as saying that FiatÂ’s sporty cars “have no legitimacy” and the brand needs to focus elsewhere in the future. It recently pulled the convertible from the U.K., and through the first six months of the year here in the U.S., it had sold a mere 1,528 models, down 19%. (Fun fact: for the first half of 2019, the entire brand sold just 5,103 models, down 38% from the prior year.) But forget all that for now, because Fiat is in denial celebration mode, marking the brandÂ’s 120th anniversary and the 70th anniversary of its Abarth performance sub-brand. To commemorate the occasion, Fiat is offering a “Scorpion Sting” appearance package on the 2020 model-year 124 Spider Abarth. Most prominent is the rosso scorpion hood decal that harkens to the Abarth badge and founder Karl AbarthÂ’s astrological sign. There are also nifty stripes in the same color that run along the length of the roadsterÂ’s lower body. It's available now for $395, and that pretty much wraps it up. Fiat re-introduced the 124 Spider at the L.A. Auto Show in 2015 as a car based on the Mazda MX-5 MiataÂ’s platform, but with its own Italian design and the 1.4-liter turbo-four engine from the 500 Abarth, offering 164 horsepower and 184 pound-feet of torque. Fiat added new options for the roadster for 2019, including a dual-mode “Record Monza Exhaust” for added growl, plus various appearance packages.

Mitsubishi's Tokyo-bound PHEV concept doubles as a boom box

Mitsubishi will unveil a futuristic concept car at the biennial Tokyo Auto Show opening in October 2019 that doubles as a boom box. Billed as a small SUV, the model remains under wraps for the time being, but a dark teaser image provides insight into what we can expect. Power for the yet-unnamed concept comes from a gasoline-electric plug-in hybrid drivetrain. At this point, we'd be surprised if Mitsubishi dared to unveil a concept that wasn't electrified to some degree. While full powertrain specifications are being kept secret, we know the design study features all-wheel drive, and it's capable of driving on electricity alone for relatively short distances – all of which sounds perfectly feasible for a company that sells the Outlander PHEV already.  Plug-in hybrid cars are often considerably heavier than comparable non-hybrid models because they gain a bulky battery pack, at least one electric motor, and yards of extra wiring. Mitsubishi promises its Tokyo-bound concept benefits from a downsized powertrain that's lighter than normal.  Evidently taken in a room with closed curtains, the teaser image shows a sloping greenhouse accented by what looks like a pair of speakers integrated into each roof pillar. Carbon fiber seemingly keeps weight in check, and part of the gasoline-electric powertrain is visible under a clear glass panel, which is a styling cue we'd normally expect to find on a supercar, not on a Mitsubishi SUV. All told, the Tokyo-bound concept looks like a forward-thinking display of the direction the Japanese firm's vehicle development teams will take in the coming years, not an accurate preview of an upcoming, production-bound model outdoors enthusiasts will be able to go off-roading in. We'll know for sure when the Tokyo show opens its doors on October 24.

We race a 2019 Subaru WRX STI up the Shelsley Walsh Hill Climb

SHELSLEY WALSH, U.K. — Keep your foot down, I tell myself. Easier said than done in a 2019 Subaru WRX STI on the narrow and treacherous Shelsley Walsh Hill Climb. Right away, thereÂ’s a very hairy fast left sweeper the STI takes in third gear, leading into another left that requires even more bravery: lifting just before entry without braking. The STIÂ’s all-wheel drive helps to pull us up and out of the corner, on the way to the fast straightaway up a steep hill. Abrupt berms, vegetation and walls line the right side, while the left has a poor excuse for a guardrail and a long drop past that. The road itself is extremely narrow – only big enough for one STI at a time – but smooth, picturesque. The prototypical meandering British B-road. An obligatory herd of sheep mill about in the distance partway up the hill, and a few cows watch the STI careen over the finish line.  This is the essence of the British hillclimb, an archaic form of motorsport that has survived to this day. In this pastoral setting, Shelsley Walsh happens to be the oldest continuously running (well, save a break for two world wars) hill climb event in the world, with the first official event being held August 12, 1905. It is, like many British hillclimb courses, almost comically short – just over half a mile, so thereÂ’s not much to memorize. Cars from the early 1900s (when it was still paved with stone) struggled to even make it to the top. Part of that struggle can be attributed to the rule that you must race with a full car of passengers, no less than the number of seats available. Besides that, cars just werenÂ’t very powerful back then, and Shelsley is a steep course. It peaks at a 16 percent grade. The course record belongs to a Gould GR55 NME open-wheel single-seater racecar at just 22.58 seconds. I managed to break into the mid 37s for my fastest run in the STI, but there was still a fair bit of time to be had in the course. Car preservation was much more important than chasing lap records — it was an hour drive back to our lodging that night, and the STI was our ride. There were two flavors of Subarus available to us for the hillclimb, and motoring around the British countryside after. One was the regular WRX STI, and the other was the shockingly expensive (and limited to 500 examples, long sold by now) Type RA. All the minor tweaks and upgrades made a tiny, tangible difference in my hill climb times.

Bentley Bentayga Stetson Special Edition is Texas-style luxury

A premium Texas car dealership has coordinated the unusual pairing of a top-tier British automaker with a legendary American hat brand. Together, with the help of the bespoke builders from Mulliner, Bentley Dallas and Stetson have birthed the Bentayga Stetson Special Edition. The first example (there will be more) arrived at the dealership this week in White Sand and comes complete with a matching hat.  Although Bentley and Stetson might seem like an odd couple, their similar core values make for a loose connection: lasting quality, timeless design and unmatched craftsmanship. The special edition, which is sold exclusively through Bentley Dallas, is available in three different colors, all of which match an iconic Stetson design. Onyx is meant to pair with the Stetson black 100X El Presidente, Dark Cashmere is for the Stetson Boss of the Plains, and the White Sand paint on this example matches the Stetson Silverbelly. The wheels can be ordered on a normal Bentayga, so the only other exterior alteration is the addition of Stetson badges on the rear side panels. Step inside, and the SUV starts to feel a bit more Texas. Mulliner conceptualized a three-tone configuration with camel main hides, saddle secondary and burnt oak accents. The seats, door paneling, and floor mats feature diamond-quilted designs, and "boot stitching" was used throughout the vehicle as a nod to cowboy culture. Possibly the most beautiful material is the open-pore liquid amber veneer, which is cut from American Red Gum trees in the U.S. Punctuating the special edition, each front seat has "STETSON" embroidered beneath the head rests, and treadplate inserts read, "MULLINER STETSON."  The Stetson Special Edition does not receive any performance upgrades, so it sticks with the twin-turbo 4.0-liter V8 that makes 542 horsepower and 568 pound-feet of torque. This exact example is listed at $246,578, but each version would be different depending on customer preferences. Bentley Dallas is expecting two more vehicles in October and November. Featured Gallery Bentley Bentayga Stetson Special Edition View 25 Photos Design/Style Bentley SUV Luxury Off-Road Vehicles Performance bentley bentayga Mulliner

Ford gets out of car subscriptions, sells Canvas to rival Fair

Ford says it’s selling its Canvas subscription service to competitor Fair, getting out of the subscription game after less than three years. Terms of the deal were not announced. Ford acquired Canvas in 2016 as a wholly-owned subsidiary based in San Francisco as a service to pilot subscriptions to Ford and Lincoln vehicles, eventually rolling out to Los Angeles and Dallas. The company said it had amassed around 3,800 subscribers in that time, who will have the opportunity to join Fair when their current subscriptions end and will receive more information from both subscription companies. But that number pales in comparison with Santa Monica, California-based Fair, which claims more than 45,000 subscriptions in 30 markets since launching in 2017. Ford was always fairly quiet about Canvas, and Automotive News last year reported that Lincoln executives expressed surprise over soft demand, saying that subscribers were looking for short-term solutions and often dropped out after just a few months. Ford is also in cost-cutting mode under CEO Jim HackettÂ’s $11 billion restructuring plan. The Blue Oval joins Cadillac, which put its $1,800-a-month Book By Cadillac subscription service on ice late last year, citing higher costs and fewer customers than expected. Cadillac has pledged to eventually relaunch the service as a pilot in select cities, but mumÂ’s been the word since. More recently, VolvoÂ’s Care by Volvo subscription service has come under scrutiny from dealers and an investigation from the California Department of Motor Vehicles and has made changes to its program. Thought it also has added the XC60, XC90 and V60 to the list of available vehicles. Fair touts itself as a “commitment-free” solution, with all-inclusive plans covering 24-7 roadside assistance, routine maintenance, insurance and other perks. It uses a mobile app to get customers prequalified, and it analyzes their eligibility and targets an affordable range of monthly payments. Customers then shop for cars and sign up for one via an initial payment that ranges by vehicle type, with the ability to keep the cars as long as they want and drop the service at any time. It peddles used cars from more than 30 different brands, none more than six years old or with more than 70,000 miles on the odometer. Fair on Tuesday announced it has raised $500 million in loans from a group of creditors, including Mizuho Bank and Japan's SoftBank, as it looks to expand its leasing services to Uber drivers.

Minnesota tinkerer selling off 500-plus motorcycles, dirt bikes and scooters

For 25 years, Tony Joslyn's entire life has orbited around motorcycles. After getting into bikes at an early age, Joslyn turned his passion into Road Rash, a salvage house where Joslyn would buy and sell two-wheelers and their parts. He wasn't picky with his workings, either, as he has accrued motorcycles across a huge range of decades and brands. And now it's all up for sale.  Suzukis, Yamahas, Harley-Davidsons, Hondas, Kawasakis, and more from the '60s, '70s, '60s, '90s, and '00s are all currently listed on K-Bid.com. There is a variety of size, styles, colors and setups, and a press release says most of the bikes are 'complete and ready for restoration or a tuneup." For Joslyn, the collection just became too much to deal with after all these years.  "It's time to clear the herd and slow down," Joslyn said in a release. "Once it starts to feel like a job, you lose some of the joy. I'm looking forward to getting back to working a few motorcycles now and then. ... It's hard to pick a favorite out of the collection, as I am partial to all of them, but I've always enjoyed the Kawasaki 3-cylinders." The bikes are located in Clarks Grove, Minnesota, directly south of Minneapolis roughly near the Iowa border. Interested parties can visit and inspect the bikes before purchasing, and there's plenty of time to do so. Open now, the auction will close October 2, 2019.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Auto News Honda Suzuki Auctions Motorcycle honda scooter Harley-Davidson Yamaha Kawasaki

2020 McLaren GT First Drive Review | Grand touring the McLaren way

ST. ANDRE LES ALPES, France — The roads snaking through these ragged mountain ranges are dubbed the Route Napoleon after the French rulerÂ’s treacherous journey from the Cote dÂ’Azur through the French Alps in 1815. The asphalt ribbon squiggles over, alongside, and literally through mountain ranges with a scrawl so rambunctious it would challenge a race-prepped Lotus Elise, let alone a high-horsepower grand tourer. This is why weÂ’re here – to put the 2020 McLaren GT and its mission statement to the test on the least direct path from A to B. The GT isnÂ’t technically the first McLaren with grand touring intentions: the 570 GT launched in 2016 as a softer, quieter way to span long distances. But the new model is the brandÂ’s first fully-formed expression of whip-through-the-corners-but-drive-all-day-in-comfort versatility. McLaren trod carefully when tweaking its winning supercar formula for long-distance friendliness, while maintaining the sharpness weÂ’d need to tackle the notorious Route Napoleon. After all, McLarenÂ’s new GT would damage the brandÂ’s street cred if it was too soft, and miss the mark if it allowed occupant fatigue to enter into the equation. McLaren says it modified about two-thirds of existing hardware to strike the ideal balance, and the exterior appears to be an accurate sculptural representation of those changes. The body panels look subtler in person, countering those who suggest similarities to the Corvette C8. The GT is a bit more flared and angular, and utilizes some flat expanses of sheetmetal to hide its larger footprint. The body actually measures 6 inches longer than the 570GT, with notable overhangs front and rear. Nevertheless, there's a very usable 10-degree approach angle, or 13 degrees with the optional vehicle lift feature, which are numbers on par with the Mercedes-Benz C-Class. The GTÂ’s dihedral doors slide up easily after pressing a small, spring-loaded section of the side panel. Inside is typical McLaren — not too preciously ornamented nor overtly austere like some Teutonic carmakers. The steering wheel and paddle shifters in my tester are finished in a nicely polished aluminum finish that echo the milled materials used in the various switchgear and controls. Buttons are kept to a minimum on the center console and there are none on the steering wheel, while McLarenÂ’s twin dials for controlling drivetrain and handling settings remain.

Mazda bringing electric car to the Tokyo Motor Show

In June this year, Mazda CEO Akira Marumoto told Automotive News Europe that "the first Mazda battery-electric vehicle will hit the market next year." Earlier this month, Mazda invited journalists to Oslo, Norway, to learn more about the automaker's EV plans and drive a prototype of the e-TPV powertrain, the letter designation standing for electric-Technology Prove-out Vehicle. Mazda had dressed the e-TPV production-intent powertrain under bodywork from the carmaker's new CX-30 compact crossover. Automotive News reports that Mazda will unveil its actual EV at the Tokyo Motor Show next month, which a Mazda spokesperson confirmed.     Mazda developed the powertrain in-house, engineered for buyers in dense urban environments. A 35.5-kWh lithium-ion battery powers a single electric motor wiith 141 horsepower and 195 pound-feet of torque. Range is said to be 200 kilometers (124 miles) on the city cycle, but that's likely on the Japanese or WLTP cycle that returns larger numbers than the U.S. EPA. The mechanical figures lie between the 28-kWh battery of the Hyundai Ioniq Electric and the 40-kWh battery of the standard Nissan Leaf. The EPA rates the less-powerful Ioniq for 124 miles of range, while the more powerful Leaf can go 150 miles. AN writes that Mazda's initial planned markets include Japan, China, and Europe where 124 miles is plenty for day trips. A version serving markets known for urban sprawl would employ a rotary engine range extender, a tech tidbit Mazda's spoken about regularly over the past year.   Iain Curry of Australian outlet Chasing Cars had good things to say about the e-TPV prototype he drove. Curry said the experimental car didn't offer strong regen braking and piped a mild four-cylinder soundtrack into the cabin to give drivers a connection to the ICE experience they're familiar with, but there's no word on whether the production vehicle will be set up the same way. Curry praised the handling, saying the e-TPV felt similar to a Mazda3 on the go and around corners. We'll get more concrete info next month in Japan. The show car in Tokyo will be a "brand-new model" on a new EV-specific platform, and don't be surprised by a compact crossover shape since the carmaker CEO said, "Our global crossover mix is currently about 60 percent."

Subaru sells its 10 millionth car in the United States

No longer a niche automaker known for quirkiness, Subaru has sold its 10 millionth car in the United States a little over a year after its American division celebrated its 50th birthday. The milestone illustrates how quickly (and how much) the Japanese firm has grown in the United States. It took Subaru 41 years to sell the first five million cars on our shores. Its line-up evolved considerably during that time period; it went from peddling the 360, a tiny kei car damned by Consumer Reports as America's most unsafe car, to spear-heading the rugged wagon segment with the original Outback. It entered the 2010s with a clear idea of how to achieve maximum growth and sold an additional five million cars in a little more than a decade. Its formula is simple: expand while staying true to its roots. The milestone car, a white 2019 Impreza, isn't destined to spend the rest of its life in a museum. It was purchased in Salt Lake City, Utah, at Nate Wade Subaru, the brand's oldest American dealer, by Dr. Craig Harmon. He didn't know he had bought his daughter a historically significant Impreza until he noticed an arch made of balloons in front of the dealership. Nate Wade parked a fully restored 360 from its private collection next to the Impreza to illustrate how far Subaru has come in 50 years. Harmon's Impreza is a run-of-the-mill Rocky Mountains-spec hatchback: white with roof rack. It'll be covered in Utah's finest road salt in just a few weeks. Nothing about it reveals the threshold it represents, and Subaru isn't planning a limited series to mark the 10-million car milestone. Instead, it's focused on keeping its streak of sales records going into the foreseeable future.

Alpine A110 vs Alfa Romeo 4C Review | Two sports cars enter

YORKSHIRE, U.K. – A proven ability to snatch defeat from the jaws of victory is all part of Alfa RomeoÂ’s romantic charm. With bodywork like red satin draped over a carbon fiber tub and the promise of a mid-engined, Italian exotic for Cayman money, the 4C was certainly a bold vehicle to relaunch the brand to the American market. Pebble Beach types could appreciate its inspiration in the gorgeous, minimalist Alfa Romeo coupes of the past. Everyone else could kid themselves it was basically a baby Ferrari, never mind the fact it only had 237 horsepower and a four-cylinder engine. At first blush, the 4C was a riot, and remains so in the Spider form itÂ’s still sold in. And it gets the blood pumping in the way a fling with an exotic Italian should, especially compared with the Germanic 50 shades of gray alternatives. I can remember the thrill at driving one back in 2014, its Italian license plates making it feel all the more exotic. It may only have cost $60,000, but it hogged attention like a Ferrari worth four times that. The fun didnÂ’t last. As seductive as the fundamental formula was and still is, time and more measured eyes ultimately found the 4C to be lacking. The ugly, fat-rimmed steering wheel turned out to be a useful visual metaphor for the feel it delivered, simultaneously under-geared and punishingly heavy, especially at low speeds. At higher ones the kickback was violent enough it needed quarter-turn corrections even traveling in a straight line. And the binary power delivery smothered whatever finesse there might have been in the chassis. Its on-limit handling, on track and in the wet, was spooky. Shocked, I called a friend with an old Exige and asked to drive his car along the same route. That I concluded youÂ’d be better off with a 10-year-old Lotus definitely didnÂ’t win me many friends in Milan. Which begs the question: What does the apparently similar Alpine A110 do differently to have earned such overwhelming praise among the same reviewers here in Europe who damned the 4C? Performance stats are comparable, as is the AlpineÂ’s pricing in markets in which it is sold. Both tap into the nostalgia and heritage of their respective brands, not least in the historic long-distance European road rallies both excelled in.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

Junkyard Gem: 1990 Daihatsu Charade

The North American automotive landscape is littered with the bones of overseas marques that tried and failed to get a toehold here. Peugeot, Austin, Sterling, Yugo, Suzuki, Daewoo… the list goes on and on. Daihatsu had the backing of majority shareholder Toyota and a very successful line of vehicles in its Japanese homeland, so the idea of selling in North America seemed to make sense in the late 1980s. Things didn't work out so well in the end, but two models of Daihatsu could be purchased here for the 1988 through 1992 model years. Here's an example of the better-known Daihatsu, spotted in a Denver-area U-Wrench yard. Apologies for the beschmutzified images; I was pulling vast quantities of Junkyard Boombox parts at this yard's All You Can Carry For $59.99 Sale that day, and I got transmission fluid on the lens. The Charade was very cheap and pretty well screwed-together, but it had to compete against cheap cars from well-known makes such as Subaru (the Justy), Pontiac (the Daewoo-built LeMans), Ford (the Mazda-built Festiva), and Geo (the Suzuki-built Metro), and it was saddled with one of the worst names in automotive history. At least the suits at Daihatsu got the naming thing right with their little mini-SUV: the Rocky. Strangely, I still see the occasional Daihatsu as I roam the car graveyards of the land. I'm not sure where they hide, but they end up here. The three-banger in the '90 Charade generated a not-so-whopping 53 horsepower. Think about that the next time you moan about the new Mirage's allegedly intolerable 78 horses, or the Versa's 109. In Hong Kong, the car's Japanese origins were emphasized in the advertising. We've set a new standards for new cars todayÂ… but you can't feel the glow until you drive one away! Featured Gallery Junked 1990 Daihatsu Charade View 14 Photos Auto News Daihatsu Automotive History Junkyard Gems

Mini and John Cooper Works floating hub caps are factory fresh accessories

Much of the allure of a Mini is tied to its iconic style and design. Beyond the legendary shape of the Mini Cooper, the company is heavy into unique details that celebrate the brand's heritage. Features such as Union Jack taillamps scream, "Look, I'm British!" while a new accessory inches even closer to the nose and says, "Look, I'm a Mini!" Literally, these new self-leveling hub caps read, "MINI" or "John Cooper Works."  Floating, or self-leveling, hub caps are not new, but they're new to the Mini Original Accessory store. For those who are unaware, these items use weights in the front of the center cap and a "flexible connection to the wheel hub extension" to keep the outermost part of the cap in one position. That position keeps whatever script is written on the cap horizontal and visible to all onlookers.  Mini says the standard wheel covers are easily removed and can quickly be changed out for these floating caps. The Mini cap takes uses a simple black background with chrome trim and script while the John Cooper Works caps have a black background, red outline, and silver, black, and red logo in the center. Both options are available for order at Mini dealerships, Mini partners, or at Mini's online shop for about $78 (Mini) or $93 (JCW). Auto News Design/Style MINI Parts and Accessories Performance

Scandal-rocked UAW extends Ford, FCA contracts, prepares to strike GM

DETROIT — Leaders of the United Auto Workers union have extended contracts with Ford and Fiat Chrysler indefinitely, but the pact with General Motors is still set to expire Saturday night. The move puts added pressure on bargainers for both sides as they approach the contract deadline and the union starts to make preparations for a strike. The contract extension was confirmed Friday by UAW spokesman Brian Rothenberg, who declined further comment on the talks. The union has picked GM as the target company, meaning it is the focus of bargaining and would be the first company to face a walkout. GMÂ’s contract with the union is scheduled to expire at 11:59 p.m. Saturday. ItÂ’s possible that the four-year GM contract also could be extended or a deal could be reached, but itÂ’s more likely that 49,200 UAW members could walk out of GM plants as early as Sunday because union and company demands are so far apart. Picket line schedules already have been posted near the entrance to one local UAW office in Detroit. Art Wheaton, an auto industry expert at the Worker Institute at Cornell University, expects the GM contract to be extended for a time, but he says the gulf between both sides is wide. “GM is looking through the windshield ahead, and it looks like nothing but land mines,” he said of a possible recession, trade disputes and the expense of developing electric and autonomous vehicles. “I think thereÂ’s really going to be a big problem down the road in matching the expectations of the union and the willingness of General Motors to be able to give the membership what it wants.” Plant-level union leaders from all over the country will be in Detroit on Sunday to talk about the next steps, and after that, the union likely will make an announcement. But leaders are likely to face questions about an expanding federal corruption probe that snared a top official on Thursday. Vance Pearson, head of a regional office based near St. Louis, was charged with corruption in an alleged scheme to embezzle union money and spend cash on premium booze, golf clubs, cigars and swanky stays in California. ItÂ’s the same region that UAW President Gary Jones led before taking the unionÂ’s top office last year. Jones and other union executives met privately at a hotel at Detroit Metropolitan Airport on Friday. After the meeting broke up, JonesÂ’ driver and others physically blocked an AP reporter from trying to approach him to ask questions.

Bugatti is planning several additional variants of the Chiron

Bugatti confirmed it's done trying to build the fastest car in the world, but that doesn't mean it will shift its focus away from performance. The company's chief executive confirmed additional high-performance variants of the Chiron are on the way, and they'll each explore different ways to go fast. Speaking with Roadshow, Bugatti CEO Stephan Winkelmann admitted putting such a big emphasis on top speed was a mistake. "If you look back at the 1920s and the 1930s, Ettore Bugatti has never done only top speed," he pointed out. "Performance is not just going straight and going very fast." Bugatti started moving way from jaw-dropping top speed figures when it introduced the Divo, a Chiron-based model developed with handling in mind, in 2018. Looking ahead, the company will continue to release different variants of the Chiron developed to excel in other performance realms. That seemingly means the 304-mph Chiron Super Sport 300+ will remain the company's fastest car. While he stopped short of laying out the company's product plan, Winkelmann outlined a variant with an impressive power-to-weight ratio, and one that puts an unprecedented priority on handling. There will be others, too; he predicted the Chiron's basic platform can soldier on until about 2025, though production is strictly limited to 500 examples, and a good chunk of the run has already been claimed. Bugatti has time to figure out which direction the Chiron's successor should go in. In the meantime, its research and development department has already started thinking about a second model that will, in Winkelmann's words, be a different type of car. While rumors point to an SUV, he hinted the model could arrive as a "two-plus-two for daily use, with more room and more luggage compartment," and it might receive some form of electrification to keep fuel economy and emissions in check.

Genesis poaches Italdesign and ex-Lamborghini design chief Filippo Perini

Only a couple of days after Kia landed ex-Infiniti and BMW man Karim Habib, the Hyundai Group scores another coup. Genesis lured Filippo Perini away from his job as head of design and innovation at Italdesign to lead the South Korean luxury brand's Advanced Design Studio Europe. Genesis said it hired Perini for his "expertise in both advanced and production design, as well as in leading design teams in streamlining digital design processes." From his side, Perini gets to bring his 24 years of luxury expertise to the evolution of the Genesis brand and Genesis' effort to reach brand perception parity with the segment goliaths.   And Perini has impressive experience. He started in 1995 as a designer at Alfa Romeo for five years, eventually taking over Alfa's exterior design. His pencil work has been seen on everything from the 1995 Alfa Romeo GTV to the 2001 Alfa Romeo 8C Competizione. A two-year stint at Audi turned into a job as head of exterior and interior design at Lamborghini in 2004, with Perini taking over Lamborghini's entire design department from 2006 to 2016. In those roles, he participated in or oversaw the designs of the 2006 Miura Concept, Reventon, Estoque, Aventador, Gallardo LP570-4 Superleggera, Urus, Aventador J, Veneno, Huracan, and Asterion LPI 910-4. Or, put more simply, almost every Lamborghini that has created the momentum Lamborghini enjoys today. In 2015, Lamborghini sold 3,245 cars, a record for the brand at the time. The Sant' Agata carmaker will sell more than 8,000 cars this year, and has had to unveil plans to cap production. In 2016, after Giorgetto Giugiaro and son Fabrizio left Audi subsidiary Italdesign, the Volkswagen mothership put Perini in charge. In his short tenure, he's done the Huracan-based Zerouno, the China-market FAW A50, and the DaVinci we saw earlier this year. Seems it was time for a new challenge. Perini will report to an alum in Luc Donckerwolke, the chief design officer at Hyundai Motor Group who ere ago designed the Lamborghini Murcielago. Perini takes over the European Advanced Design Studio next Monday, Sept. 16.

2020 Cadillac CT4 revealed in non-V form

We got our first look at the 2020 Cadillac CT4 when its V variant made its debut a few months ago. Now the company is officially showing off the regular CT4 luxury sport sedans. They actually don't look all that different from the V, though - especially the CT4 Sport trim. The Luxury and Premium Luxury trims are distinguished by less aggressive ground effects and a grille studded with chrome pieces shaped like the Cadillac logo. The interior is similar, too, complete with an 8-inch touchscreen. Super Cruise will be made available on the CT4 later in 2020, including on the V model. Really, the big news is the powertrain as V6 engines have been dropped entirely from Cadillac's compact sedan. The base CT4 engine available in Sport or Luxury trim cars is a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Coupled to either rear- or all-wheel drive, it features cylinder deactivation and an eight-speed automatic transmission. Unlike in the old ATS, a manual transmission is not available. One notable mechanical difference between trims is the Sport trim gets standard Brembo brakes. Moving up from the 2.0-liter engine is the turbocharged 2.7-liter four-cylinder introduced on the CT4-V. Available on the Premium Luxury trims, its output is downgraded to 309 hp and 348 lb-ft of torque from the CT4-V's output of 325 hp and 380 lb-ft. It too has cylinder deactivation and can be had with either rear- or all-wheel drive. The only transmission offered is a 10-speed automatic. The V model also gets Brembo brake upgrades, and with rear-wheel drive includes Cadillac's magnetically controlled adaptive suspension. Cadillac will start taking orders for the CT4 later this year, but pricing has not been announced yet.

Aston Martin working on a limited-edition DBR1-inspired speedster?

The Supercar Blog has heard from its supercar-privy sources that Aston Martin might be working on a new speedster. The putative roofless model could be inspired by the most important and most valuable racer in Aston Martin's history, the DBR1 that took overall honors at the 24 Hours of Le Mans in 1959. Thought to be limited to just 88 units, TSB said the carmaker might have held a VIP preview event during Monterey Car Week last month. If the English luxury maker is developing such a model, we can probably declare the speedster era officially open for business after the limited-edition Ferrari SP1 and SP2 Monzas, Porsche 911 Speedster, and the Ultimate Series speedster that McLaren recently admitted is on the way. As with the Aston Martin, all of the other high-bucks open-sky models take inspiration from racers of yesteryear.  Furthermore, if Aston Martin really has such plans, the carmaker would be re-opening a six-year-old chapter in company history. In 2013, Aston Martin unveiled the CC100 Speedster (pictured) at the 2013 Nurburgring 24-Hour race, created in just six months to celebrate the 100-year anniversary of Lionel Martin and Robert Bamford deciding to build vehicles together. The CC100 was built on the VH platform utilized by the brand's production cars, and used a 6.0-liter V12 with 565 horsepower to do 0-60 mph in four seconds and reach a top speed of 180 mph. The carmaker built two of them, sold to collectors very close to the brand. Today's DBS Superleggera platform and its 5.2-liter, 715-hp V12 could make a suitable base, and who knows, Aston Martin — unlike Ferrari or McLaren — could go all the way and swap the DBS' eight-speed automatic for a manual transmission. Another site said the speedster impetus comes from "the high interest demonstrated by multiple collectors." No one has any insight on the symbolism of 88 units, though. Aston Martin did release a series of Dragon 88 models in 2012 for the Asian market, named for the auspicious omens associated with the number 8 in Chinese culture, and the Interush International team entered a #88 Vantage GT3 race car in the 2015 GT Asia Series, but that seems a gossamer thin connection. The Aston Martin One-77, after all, had a lot of sevens in its spec sheet, but was half named for its production volume. If there is a vintage-themed speedster on the way, we'll know more when Aston Martin decides to admit it.

GM recalls 3.8 million vehicles in North America due to braking issue

WASHINGTON — General Motors Co said Wednesday it was recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and that has been linked to 113 accidents and 13 injuries. The recall covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles. In late June, GM recalled 310,000 vehicles in Canada for the same issue. GM did not immediately explain why the Canadian recall occurred more than two months before it called back the vehicles in the United States. The recall was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted on Wednesday. The NHTSA opened a preliminary investigation into the issue last November, and said it had reports of nine related crashes and two injuries. It provided GM in July with additional field reports that prompted the automaker to open an investigation. GM said it could affect braking in "rare circumstances." The NHTSA said in a statement the "vehicles may experience brake boost failure, which would require increased brake pedal effort, leading to a hard brake pedal feel, and potentially increased stopping distance." GM said dealers will reprogram the electronic brake control module to improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Separately, GM said on Wednesday it is recalling 270,000 additional U.S. vehicles in three smaller recalls, including 177,000 2018 Chevrolet Malibu cars with 1.5L turbo engines because an error in the engine control module software may result in the fuel injectors being disabled.

Driving the Jeep J6, Shakedown Challenger and other Mopar concepts

Mopar has been a one-stop-shop for factory-backed performance modifications and accessories on FCA products for a long time now. You want a 707-horsepower engine for your old Plymouth Belvedere? Mopar has you covered with the Hellcrate. Maybe you want a lift and off-roading lights on that newly-bought Wrangler? Mopar can accommodate those wants (or needs, we don’t judge) as well. We get to see some of the companyÂ’s weirdest creations every now and then, but rarely do we get the opportunity to drive the FCA Mopar concepts. ThatÂ’s what made this past Woodward Dream Cruise so special: We got to rip some of MoparÂ’s finest and most recent creations up and down Woodward Avenue. Everything from a 1971 Challenger restomod to the brand-new Easter Jeep Safari J6 concept was in attendance, so letÂ’s get right to it. Mopar Woodward View 6 Photos 1967 Plymouth Hellvedere This car is near the pinnacle of what you can do with off-the-shelf Mopar purchases. It was only a humble 1967 Plymouth Belvedere before Mopar dropped the 707-horsepower supercharged V8 from the Hellcat into the engine bay. Sound ridiculous? Yeah, it is. Other parts of it are new as well, including the disc brakes. Good call. However, Mopar didnÂ’t remove the classic car charm from the entire driving experience. The steering, for example, is surely as slow and inaccurate as it was back in 1967. That doesnÂ’t help matters when youÂ’re trying to put 707 horsepower to the pavement with less-than-ideal rear rubber. Floor it in damn near any gear of the Tremec six-speed, and the front end rises straight up as the rear kicks sideways with the force of many mules. There are no electronics such as traction control or stability control to step in and wrangle the car into submission. But hey, who wants them, anyway? The question remains: Should you buy a Hellcrate engine for your classic? If money were no object, the easy answer is yes. Have at it so long as you love smoky burnouts and excessive amounts of horsepower. Just make sure you know how to deal with that much power before you stick your right foot in it.   Dodge Challenger Shakedown View 15 Photos 2016 Dodge Shakedown Challenger Concept WeÂ’re going downhill in horsepower with this restomod, but the drivability and ease of driving goes way up. Dodge showed this “Shakedown” concept at SEMA awhile back, and as with most concept cars, getting a chance behind the wheel is a special opportunity.