Blog

2020 Mazda MX-5 Miata due for price bump, more safety tech

Mazda hasn’t released official information yet on its 2020 MX-5 Miata, but CarsDirect got its hands on an early draft of an order guide, which suggests both the soft- and hard-top versions of the roadster are due for a price bump after receiving more standard safety technology and some suspension upgrades on certain manual models. Starting price on the 2020 Miata Sport Soft-Top will be $26,580, not including destination, which is reportedly not yet listed, according to the report. ThatÂ’s $850 above the non-inclusive 2019 base price. The price hike on the Grand Touring trim is even higher, at $1,090. For the RF Club Hardtop, starting price inches up by $700 to $33,045 — again, excluding destination, which was $895 for 2019. If you want to drive stick, prepare to pay more for the Grand Touring manual versions, which will climb by $890 and $1,090 for the soft- and hard-top versions, respectively. ThatÂ’s down to new Bilstein shocks, a limited-slip differential, front shock tower braces and a sport-tuned suspension, which should make for fun driving for stick enthusiasts. The big news is that the i-Activesense suite of safety technologies, previously offered as a package, will go standard across all trim levels. It features lane departure warning, blind-spot monitoring, rear cross-traffic alert and low-speed automated braking. Apple CarPlay and Android Auto will also reportedly debut on both versions of the roadster as standard on Club trims and above. The Miata is already coming off a 2019 when it got an infusion of 26 more ponies and 3 pound-feet, bringing output to 181 hp and 151 lb-ft from its 2.0-liter Skyactiv-G inline-four engine, plus that limited-edition 30th Anniversary model. Looking ahead, Mazda is reportedly toying with the idea of electrifying its lightweight roadster for its next generation, expected mid-next decade. Related Video:

Japanese students turning Mazda CX-5 into Dakar Rally-ready off-roader

Students at Japan's Nihon Automobile College (NATS) are transforming a first-generation Mazda CX-5 into a full-blown off-roader that looks ready to compete in the Dakar Rally. Named CX-Runner, the one-of-a-kind model will make its debut at the Tokyo Auto Salon opening its doors in January 2020. The Tokyo Auto Salon is the Japanese equivalent of the annual SEMA show, so anything goes under the bright lights. NATS students began the CX-Runner project with a used 2012 CX-5 and seemingly set out to leave as few original parts as possible. While the project isn't finished yet, a sketch released by the school suggests the crossover will receive wheel arch extensions, an external roll cage, a beefier suspension, and a shorter front bumper that increases the approach angle.  Photos published on the school's official Facebook page show the project is moving along nicely. The body extensions are made with a composite material that looks like Kevlar, and fitting the rear wheel arches required sealing the back doors, which is fine; the CX-Runner will be a two-seater. We don't know if students are planning to make changes to the CX-5's powertrain yet, but a thick skid plate will protect whatever is under the hood from expensive impacts with obstacles encountered off-road. nats-mazda-cx-runner-project-1 View 3 Photos The Tokyo Auto Salon will open its doors on January 10, so the students have time to finish the custom-made body kit, install the suspension, paint the CX-Runner, and fit the roll cage. They're not just doing this for fun, though. NATS began offering a customizing class in 1998, and building a tuner car is one of the requirements aspiring builders need to fulfill in order to graduate. With that in mind, it's no surprise that NATS will again have a big presence during the 2020 edition of the Tokyo Auto Salon. In addition to the CX-5 off-roader, its students are building six custom cars including a Nissan 370Z roadster wearing front and rear fascias sourced from a GT-R, a Toyota 2000GT-inspired convertible based on the Suzuki Cappuccino kei car from the 1990s, and a four-door, five-seater Toyota 86 built on Camry bones but powered by the coupe's flat-four engine. Relate Video:

Redesigned Kia Sorento lineup to include hybrid, plug-in models

The next generation of Kia's mid-size crossover will be electrified, a company executive confirmed Friday. The redesigned Kia Sorento, due in 2020 as a 2021 model, will be offered in both hybrid and plug-in hybrid variants. Kia's European COO, Emilio Herrera, confirmed the new green models in an interview with Automotive News Europe. They will join the Niro (which is offered both as a PHEV and a pure EV) and the delayed 2021 Soul EV in Kia's stable of electrified crossovers.  Details are still slim, and while the U.S. is the largest potential market for the Sorento, American buyers have been hesitant to jump on larger hybrid models. At this point, it's not clear whether the two hybrid models will be included in the variants available with the new Sorento launches, or whether they will be added to the lineup later in the crossover's product cycle.  Autoblog has reached out to Kia for clarification on timing and availability and we will update this story if we learn any pertinent information.  We do know that the new Sorento is due in 2020, and will share its fundamental architecture with sister brand Hyundai's new Santa Fe. Hyundai has not announced formal plans to offer hybrid variants of the Santa Fe here in the states, but electrified powertrains were hinted at for Europe when the crossover was originally unveiled at the Geneva Motor Show back in 2018.  Like Hyundai, Kia has been working hard to overhaul its crossover and SUV lineup here in the United States, where customers are migrating to taller vehicles in droves. The introduction of the larger Telluride has made some room for the stretched Sorento to shrink back into its primary role as a two-row mid-sizer. Related Video    

Chrysler Pacifica reportedly getting updated design and eAWD system for 2021

Chrysler is preparing to give the Pacifica and Voyager minivans a comprehensive mid-cycle update, according to a new report. Both models are scheduled to make their debut in early 2020. The Pacifica currently shares styling cues with the 200, a sedan discontinued after the 2017 model year. The team of stylists tasked with updating it returned from the design well inspired by the third-generation Town & Country released for the 1996 model year, and the 300, the firm's only sedan. Mopar Insiders described a sportier look characterized by a bigger grille, and sharper-looking headlights with LED accents. New-look rear lights connected by a light bar will round out the nip and tuck. The publication added camouflaged prototypes will hit the road in early 2020. The Voyager added to the range for the 2020 model year is a cheaper, less equipment-rich variant of the Pacifica. While it will receive the same updates as its more expensive sibling, it might not come standard with the aforementioned LEDs. Expect other minor trim differences inside and out, too, but the two nameplates will continue to share a basic design. The Dodge Grand Caravan is finally retiring in 2020, so the Voyager will become the ever-important entry point into the group's minivan range. The same report sheds light on the mechanical changes Chrysler has in store. The firm will give buyers in the market for an all-wheel-drive minivan an alternative to the Toyota Sienna by adapting Jeep's plug-in hybrid technology to the Pacifica. Called eAWD, the system consists of a battery-driven electric motor integrated into the rear axle. It delivers through-the-road all-wheel drive, meaning there's no connection between the front and rear wheels, and clever packaging makes it compatible with Chrysler's Stow and Go seats. The gasoline-electric setup will make the Pacifica a rear-wheel drive electric car on short trips, while improving its gas mileage the rest of the time. There's no word yet on what will be under the hybrid, all-wheel-drive model's hood. Jeep's upcoming Compass and Renegade hybrids use a turbocharged, 1.3-liter four-cylinder, but that sounds a little bit small for a reasonably big van developed with the American market in mind. Motorists not interested in going hybrid will likely still have the venerable 3.6-liter V6. And, whether the Voyager will be eligible to receive the new hybrid powertrain remains unclear.

Mitsubishi shows five concepts headed to the 2020 Tokyo Auto Salon

Mitsubishi will storm the 2020 Tokyo Auto Salon with seven concepts, five based on production models getting early previews. This year's haul more than doubles the trio of concepts Mitsubishi took to this year's Tokyo Auto Salon, and it's obvious the company put more effort into all of them as well. The wildest among the five could be the Delica D:5 imagined by Japanese director, producer and writer Teruo Ito. With the idea to rework the Delica into the idea of embodying charm "like a dog or a member of a family," Ito threw out the van's rectangular headlights, working with Mitsubishi designers to replace them with large round units inset like eyes. The anthropomorphic face is so important that the concept is apparently called the "D:5 eye," according to Google Translate. The van wears a "light army green" hue from its roof to its MLJ Daytona wheels, the interior done up in a olive tartan pattern.   Right behind it in the "Look at me!" stakes is the eK Cross Wild Beast Concept, a contrast to the "Cute Beast" that is the standard eK kei car. Drenched in yellow, with gray X graphics, a contrasting black roof and tailgate, black cladding, mud flaps, chunky rocker panels, roof rack and basket, and all-terrain tires, this one is meant to evoke a "playful outdoor image." In case the striking livery doesn't convey the message, the command to "Play the Nature" appears on the hood, roof rack and fuel filler cap. Inside, all-weather floor mats and a load bay mat stand ready to protect the interior from mud. Or Play-Doh. The Mitsubishi Outlander PHEV NERV is the widest combination of real and imaginary usefulness. Re: the latter, NERV is the fictional Japanese paramilitary organization that battles creatures called Angels in the "Neon Genesis Evangelion" anime. Warfare between the Evangelion units and the Angels tends to destroy a lot of animated real estate, hence the usefulness of a disaster relief vehicle like the Outlander PHEV, coordinated by the Gehirun Corporation that's also in the anime. For real-world service, designers installed a KYMETA u7 planar satellite antenna that can pick up signals from Sky Perfect JSAT Corporation — a Japanese-based satellite television and Internet company, and the Asia-focused Michibiki emergency broadcast and GPS service.

Production version of Kia Imagine concept due in 2021

In an interview with Automotive News Europe, Kia Europe COO Emilio Herrera said the Imagine concept that debuted at this year's Geneva Motor Show should turn into a production model "in one or two years." Gregory Guillaime, Kia's European VP of design, said the Imagine is a "large C-segment car" intentionally blurring the distinctions between body types, a press release describing the concept as "drawing together elements of a muscular sports utility vehicle, a sleek and athletic family saloon, and a versatile and spacious crossover." Herrera didn't give any details on how the production version will differ from the concept. Flourishes like the windshield glass flowing uninterrupted into the roof and the 21 interior screens aren't likely to make it out of the studio. We do know that Kia plans a new, pure EV architecture shared with Hyundai. This will support larger, more powerful electric offerings that boast more range than products like the Kia e-Niro and Soul EV. The e-Niro is rated at 282 miles on Europe's WLTP cycle, it's said Kia wants to hit 500 miles of range. The automaker would only say of the Imagine's powertrain that it is "a low-mounted, induction-charged battery pack that powers a compact drivetrain." More importantly, the powertrain will focus on performance, "approaching electrification purely from an emotional point of view,” and pitched by Autocar as competing against EVs like the Polestar 2. As a C-segment competitor like the Ford Focus or Volkswagen Golf, the chances of the Imagine making it to the U.S. are unknown. Herrera made his comments in a conversation about Europe's impending CO2 emissions regulations. At one point, Herrera explained the five methods he sees for dealing with the emissions caps, and we can already divide automakers among those five tactics. The Imagine, and other Kia vehicles with alternative powertrains on the way, are how the Korean automaker will avoid fines. The full interview is worth a read. Herrera lays out some of the difficulties in the EV landscape, such as achieving the necessary volumes, pricing, and battery supply, and explains why he doubts some competitor's claims about launching inexpensive subcompact EVs. Related Video:    

Lamborghini loans an Aventador S to father and son building 3D-printed replica

In October we shared the story of Sterling Backus, the physicist in Erie, Colo., who was building a Lamborghini Aventador replica with his 11-year-old son Xander. In progress for nearly two years, Backus — who designs lasers as his day job — fabricated a steel chassis, sourced an LS1 V8 from a Chevrolet Corvette for power, bought lights on eBay and 3D-printed the body panels that were then encapsulated in carbon fiber. Backus and son call the coupe the Interceptor, and Sterling said he subtly changed every exterior panel to avoid legal issues with Lamborghini. The Sant'Agata automaker was paying attention to the Interceptor, though, as an exec phoned Sterling about it before Christmas. The subject of the call: Lamborghini's marketing chief wanted to know if he and Xander would like to borrow an Aventador S for a couple of weeks and shoot a video. The Italian automaker has been known to go on hunts for deep-down Lamborghini fans. Last year Lamborghini had a surprise for one lucky kid going Christmas shopping at a store in Italy; kids that said they wanted a model Lamborghini were told the store was out, and almost all the kids accepted a different model instead. One child made it clear he didn't want a substitute if he couldn't have the Lamborghini, so he not only got a the model he wanted, he got it delivered in a Lamborghini driven by factory driver Marco Mapelli. Xander's devotion to the Aventador in "Forza Horizon 3" is what compelled him to ask his father if they could build a real-life version. For that, Xander and Sterling earned Lamborghini's #RealLover distinction this year. Katia Bassi, Lamborghini's CMO, said, "Automobili Lamborghini is against any attempt at counterfeiting. However, a true story of such authentic passion deserves to be featured, which is why we chose to tell of SterlingÂ’s and XanderÂ’s project in our 2019 Christmas video." Lamborghini Real Lover Campaign View 21 Photos The Interceptor build continues, documented on Facebook. The senior Backus aims to turn his work it into an educational tool. "Ultimately, I want kids to get interested in STEM, and this is a great platform for it because of all the disciplines involved in a project like this." But after 20 months of effort, he and Xander will probably enjoy taking a holiday break in the car that started it all. Related Video:

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

China fines Toyota $12.5 million over Lexus price-fixing

BEIJING — China's market regulator on Friday has fined Japanese carmaker Toyota Motor 87.6 million yuan ($12.5 million) for price-fixing on its premium Lexus cars in eastern Jiangsu province, according to a document on its website. The decision comes as China steps up regulation over auto sales in the world's biggest vehicle market, where more than 28 million cars were sold last year. The anti-monopoly bureau of State Administration for Market Regulation said that between 2015 and 2018, the Japanese carmaker set a minimum sales and resale price for its cars in coastal Jiangsu province, which deprived dealers of pricing autonomy and harmed customers' rights. Lexus also fixed sales strategies in the region over the period, including offering customers discounts while asking them to purchase accessories at fixed prices, a sales tactic usual among individual auto dealers in China but frowned upon for carmakers. A spokesman at Toyota, Lexus' parent firm, told Reuters the firm acknowledged the penalty and respects the decision. He did not comment further. China's auto sales are declining, but Lexus' sales keep growing. It sold 180,200 vehicles in the first 11 months this year, a 21% jump from a year earlier. In June, China's market regulator imposed an 162.8 million yuan fine on Ford Motor Co's joint venture with Changan Automobile Group for violating anti-monopoly law. ($1 = 6.9927 Chinese yuan renminbi) Reporting by Yilei Sun and Norihiko Shirouzu. Related Video:

Junkyard Gem: 2005 Mitsubishi Lancer Ralliart Sedan

Ever since I pined for a new Starion while I was driving a beige Toyota sedan in high school, I've had a great affection for sporty Mitsubishis. That means that I keep my eyes open for such cars while making my appointed junkyard rounds, especially the more obscure machines. Cordia Turbos, Tredia Turbos, Colt Turbos, Conquests, and — of course — interesting variations on the Lancer theme (no, not this kind of Lancer, nor this kind) make up my Mitsubishi junkyard-photography shopping list. Just recently, I spotted this 2005 Lancer Ralliart in a Denver yard, right next to a clean 2006 MINI Cooper S. The O-Z Rally Edition Lancers sold very well in Colorado, and so I find plenty of them (nearly all missing their original O-Z wheels) in the car graveyards in these parts. Most of the O-Z Lancers came in bright yellow paint. When I spotted a discarded yellow Lancer with special decklid badging, I thought I had run across yet another cool-looking-but-slow, appearance-package Lancer. A closer look (and a VIN check, because car owners "upgrade" with badge swaps all the time) revealed the truth: not a dime-a-dozen O-Z Rally but a genuine, numbers-matching Ralliart! As a matter of fact, I do find Lancer Evolutions (and Subaru WRXs) in Colorado U-Wrench-type yards, but they're always so thoroughly crashed and/or gutted that I don't bother photographing them. The 2005 Ralliart was no Evo, of course, but it came with a 162-horsepower 4G69 2.4-liter straight-four instead of the regular Lancer's 120-horse 4G94. Throw in the Ralliart's four-wheel-disc brakes plus its suspension upgrades, add the front seats out of the Japan-market Evolution GTA, and you had a reasonably quick car for just $18,499 (about $25,000 in 2019 dollars). That was a pretty good deal, at a time when the Dodge Neon SRT-4 cost $20,700, the Chevy Cobalt SS started at $21,995, the Volkswagen 1.8T GTI went for $19,510, and the Honda Civic Si cost $19,220 (though all but the Civic Si boasted more power than the Lancer Ralliart). A five-speed manual came as standard equipment on the Ralliart, though I fear many (probably most) American buyers chose the optional slushbox. This car has the five-speed. In theory, the powertrain from this car ought to be a not-too-difficult swap into any number of cheap-as-dirt 1980s Dodge/Plymouth Colts, and I hope some Colt-owning junkyard shopper grabs the guts from this car for that purpose.

Didn't get the toy you wanted for Christmas? Grab this '79 Dodge Macho Power Wagon

This Christmas, kids everywhere got tons of toys, but what about the grownups? Adults like toys, too, and we particularly like this 1979 Dodge Macho Power Wagon pickup for sale on eBay. Dodge plugged it as one of its "adult toys" back in the day, which makes it the perfect post-Christmas purchase for anyone who's feeling a little left out. Dodge began advertising a lineup of specialty trucks as "adult toys" back in 1977, during the period when trucks were first becoming personal-use vehicles rather than just workhorses. Dodge's specialty models ran though the end of the decade and included the Street Van version of its B-series panel van, the Macho Power Wagon 4x4 pickup, the Warlock short-bed stepside pickup, the Ramcharger SUV, and even a variant of the Ram 50 mini-pickup. The Macho Power Wagon was a 4WD W100 pickup with a Sweptline bed, and could be had in short- or long-wheelbase configurations. Two-tone paint included black on the lower body, the hood, and the roof. Tape stripes, painted spoke wheels, and a bed-mounted roll bar added to the look. This '79 Macho Power Wagon is a long-bed version, riding on a 131-inch wheelbase. It's powered by a 318-cubic-inch V8 with dual exhausts, mated to a three-speed column-shift automatic and four-wheel drive. Not the most manly powertrain, maybe, but it was the late '70s, and one's engine wasn't as important as one's graphics. This Power Wagon's visuals make an emphatic statement indeed, with the two-tone white and black livery set off with bright orange stripes, wheels, and most critically, POWER WAGON emblazoned on the bed and tailgate. It's enough that we can forgive the missing roll bar. Inside, we find a vinyl bench seat, a floor-mounted shifter for the two-speed transfer case, and a period-correct Craig cassette stereo. Factory A/C is also present. Sure, you could get a new Ram 2500 Power Wagon, but would that really have the gold-chain-in-a-bed-of-chest-hair swagger of this beast? If this Adult Toy speaks to you, we would point out that sometimes the best presents are the ones you get yourself. Related Video:

Fiat Chrysler plans to speed up its product development

Fiat Chrysler is streamlining its global product development process in a bid to bring new or updated models to showrooms more quickly, reflecting heightened consumer expectations but also massive technological upheavals brought by things like electric vehicles, self-driving cars and ever more strident safety regulations. FCA recently announced plans to flatten its corporate product development structure across its global properties to reduce complexity, speed decision making and get products to the market faster than the years it can take today. It's similar to what Jim Hackett has been trying to do across town at Ford. FCA Chief Technology Officer Harald Wester, who is also executive chairman of Maserati, will oversee the reorganized product development unit. The company says it has already committed ˆ9 billion — nearly $10 billion at current exchange rates — toward its five-year plan to launch 30 new electrified nameplates globally, with plug-in hybrid versions of the Jeep Compass, Renegade and Wrangler due up first along with a full-electric Fiat car and commercial van. Maserati has also received a ˆ1.6 billion investment to bring about hybrid and battery-electric powertrains, plus Level 3 autonomous capabilities. “The industry has never experienced technological change at the pace we are now seeing,” CEO Mike Manley said in a statement. “So, weÂ’re unleashing the creative energy of our engineers and technical experts for the benefit of our customers and stakeholders worldwide.” One of the biggest changes is integrating powertrain and vehicle engineering, previously separate units, in a global process involving more collaboration and better deployment of resources. Engineering will also be supported by five centers of technical competence, including groups that will develop electronic architectures and another focused on advanced technologies. FCA says product development has previously been served by several different organizations that operated as regional sub-groups or standalone units. Left unmentioned is whether the merger with PSA Group, which will reportedly result in nearly 70 percent of all models produced by the two brands moving to just two PSA platforms, is helping to push the timeline on these changes. FCA is also making greater use of the Alfa Romeo Giorgio platform, planning it for the next-generation Jeep Grand Cherokee.

10 most memorable cars and SUVs of 2019

It's no surprise that a car reviewer will drive a large number of cars over the course of a year. Indeed, when the clock strikes midnight on Dec 31, I will have driven 75 new cars, trucks and SUV this year (and one old Peugeot) over the course of weekly evaluation loans and first drive events. That sure seems like a lot. Some definitely got more attention than others, and some came and went without leaving much of an impression – I completely forgot I drove a Kia Forte. Yet in the spirit of this day, I thought I'd pick the 10 that I would love to see under the Christmas tree tomorrow morning. You know, just in case you were looking to get me something. I'll also throw in a couple disappointments that were memorable for the wrong reasons. They'd get sent back to the store on Boxing Day. Lexus LC 500 Pictured below and resplendent in its Flare Yellow metallic paint, the car that would reach highest on my list is the divine Lexus LC 500. As a devout lover of GT cars, the LC ticks all the boxes. Muscular and characterful engine? V8, check. Beautifully made and memorable interior? It's gorgeous, to hell with Remote Touch. Check. Comfortable and reasonably practical? Superb seats and, uh, yeah. Makes me want to stand there and stare at it? You bet. Though I long figured my heart would say LC but my head "Porsche 911," after this go-around, that's no longer the case. LC, pretty please. 2020-lexus-lc500-f34-2 View 19 Photos Polestar 1 I actually feel lucky that I got to drive the Polestar 1. Only 150 will be produced each year, and it's a far more special thing than it would initially appear. And that's despite initially appearing to be a beautiful, classic two-door GT car with a roof so rakish it's only possible because it's made of carbon fiber. That itÂ’s a massively powerful plug-in hybrid with more all-electric range than any other PHEV is a thick dollop of whipped cream on a slice of Toscakaka. You know, Swedish dessert, Swedish car. Fine, I'll stick to Ikea references.  Polestar1_Launch_SanFrancisco-0014 View 44 Photos Volvo V60 Cross Country Speaking of Sweden, did I drive this car off the road there? Sure did! And despite this, the V60 Cross Country scratches that certain wagon itch and looks sensational to boot. I wish it were available with the T8 plug-in hybrid powertrain, but it's best not to get greedy at Christmas.

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

2020 Ram 1500 Review & Buying Guide | The class home run

The 2020 Ram 1500 is a home run, plain and simple. From the humble Tradesman to the opulent Limited and every flavor in-between, this thoughtfully designed and well-executed truck impresses like none other. It possesses the capability expected of a half-ton pickup and dimensions that pretty much match its competitors, but it consistently goes above and beyond what's expected. Its coil spring rear suspension provides superior ride, handling and trailer control. Its interior is a model of quality, functionality and aesthetics, with user-friendly technology to boot. The breadth of engine options may not match its Chevy and Ford rivals, but the four available are fully competitive with ample power, strong fuel economy and advanced engineering in the form of the eTorque mild-hybrid system. If you're looking for a truck and don't at least consider the Ram, you're doing yourself a disservice. What's new for 2020? The Ram 1500 regains its popular EcoDiesel engine for 2020, although this time around, its main competitors offer similarly powered engines as well. Also new is a Night Edition available for Big Horn and Laramie that adds blacked out trim, badging and wheels (it looks pretty similar to the truck above). The Rebel also gets access to a similarly blacked out appearance package and can also now be equipped with the Safety Group of driver assistance technologies. There are also three new colors. 2019 Ram 1500 Interior View 56 Photos What's the interior and in-car technology like? It's easy to be smitten by the Ram 1500 in its fanciest Longhorn and Limited trim levels, which are bedecked in soft leather, special color schemes and unique styling elements like the Longhorn emblem literally branded into real wood trim. There are unique features like the huge vertically oriented touchscreen and the ventilated reclining back seat. It's easily the most luxurious pickup ever made. Crucially, however, we are actually more impressed by the basic Ram 1500 Tradesman and Big Horn trim levels. While the quality of plastics is typical for the segment (that goes for those ritzy Rams, too), the different textures and attractive design result in a cabin that looks and feels better than trucks that cost a comparable amount or more. For instance, the rich gray cloth upholstery in a Big Horn test truck contributed to a far more premium environment than the one found in a leather-lined 2019 Chevy Silverado. The Ram doesn't just impress aesthetically.

Nissan executive Jun Seki resigns to become president of Nidec

YOKOHAMA, Japan — The executive tasked with leading a recovery at Nissan said he had decided to resign just weeks into his new job, a move that could disrupt the automaker's push to turn the corner on scandal and slumping sales. Jun Seki, Nissan's vice chief operating officer and a former contender for chief executive, told Reuters he was leaving to become the president of Nidec, a Kyoto-based manufacturer of automotive components and precision motors. He will likely depart in January after three decades at Nissan, including a stint heading its China business. "I love Nissan and I feel bad about leaving the turnaround work unfinished, but I am 58 years old, and this is an offer I could not refuse. It's probably my last chance to lead a company too," he said in a brief interview. "It's not about money. In fact, I will take a financial hit since Nissan pays us well," Seki said. He declined to elaborate further. Nissan and Nidec declined to comment. Seeking to roll back some of the costly expansion under ousted chairman Carlos Ghosn, Nissan has embarked on wide-ranging turnaround plan. That plan, which began in April, is now on track to generate a cumulative few hundred billion yen in cost cuts and operational efficiency gains by the year to March 2022, according to two Nissan sources who spoke on condition of anonymity. One hundred billion yen is roughly equal to $915 million (707 million pounds). Adding to concerns about disruption among Nissan's top management, the sources said that Seki, Chief Operating Officer Ashwani Gupta and Chief Executive Makoto Uchida have so far failed to gel as a team after being named to their posts in October. They officially took over on Dec. 1. "There was no instant, cohesive chemistry achieved by those appointments," one of the sources said. Gupta and Uchida were not immediately available for comment. Seki's resignation could further complicate Nissan's relationship with top shareholder Renault SA. Seki recently worked in Paris for a year and was seen as relatively close to the French automaker. PERSUADED IN THE END Asked if he was leaving Nissan because he was passed over for the role of chief executive, Seki said that was not the case but did not elaborate. He and Uchida, most recently the head of the China business, had been seen as top contenders for the CEO job. Reuters reported in September that Uchida was seen as more favored by Renault.

Bentley Mulsanne EWB China Edition ironically celebrates London

Bentley's versed in special editions for China, although it's been a while since we last saw one. In 2010, the English automaker released the Continental GT Design Series China and Flying Spur Speed China, following that up a year later with the Linley Continental Flying Spur that was limited to a mere 10 units. This time around, 15 Chinese buyers get the chance to order the Bentley Mulsanne Extended Wheelbase China Edition in any color they want so long as it's black. This being a product of Bentley's Mulliner bespoke division, though, buyers do get a choice of two special blacks. Onyx black imbues the abyssal shade with "a hint of dark blue" as well as darker tones, resulting in the "deepest black finish offered by Bentley." Mulsanne shoppers who like their blacks a bit more uplifting should opt for Black Velvet, said to be "a richer black-based finish" shot through with red pigments, creating a color recalling black cherries. Both hues are hand-applied, as is the gold fine line running along the Mulsanne's shoulder. Further exterior highlights comprise the chrome Serenity grille with a double-diamond quilt pattern, a Union Jack on the C-pillar, 21-inch and 14-spoke polished Radiance wheels, exclusive welcome lamps, and polished, stainless steel Mulliner sill plates.  Three vogue, two-tone interiors will be available, in either Fireglow with Imperial Blue, Newmarket Tan with Burnt Oak, or Shortbread with Redwood. Crewe artists embroidered the hide covering each seat with "an expressive interpretation" of London's skyline that includes widely recognizable sights: Tower Bridge, the London Eye Ferris wheel, the Shard and Gherkin towers, and The O2 arena. The same design is inlaid into the chosen veneer on the passenger's side.   The 6.75-liter turbocharged V8 with 506 hp and 752 pound-feet of torque goes untouched. Bentley will share pricing only with the 15 souls ready to purchase, but the standard sedan starts at more than 5 million yuan, or almost $750,000 American. Buyers would be advised to have a Bentayga on hand to convey the funds to the dealership.

Top Gear magazine climbs all over the McLaren Elva

Top Gear deputy editor Jack Rix took a camera crew to McLaren's Technology Center for a closer look at the Elva roadster. Not only did Rix provide his usual, thorough once-over and explanation of design features, but thanks to the magic of moving pictures, we get graphic demonstrations of how the Elva's most interesting feature works. McLaren engineers needed to figure out a way to protect helmetless occupants from getting their faces painted with bugs and detritus at speed. Their solution is the Active Air Management System (AAMS), composed of a deflector and a network of vents that create a "bubble of calm" around the passenger cell. Unlike the rest of the Elva, the AAMS ain't pretty, but beauty always loses tie-breakers to effectiveness in Woking.  For a vehicle with so little to it, including the number of body panels, there's a ton going on all around the open-top. The rear mesh is 3D-printed titanium. Short seat squabs combined with a moving steering wheel and gauge cluster improve ingress and egress. Four high-flow exhaust pipes are placed in two locations and pointed two directions in order to separate tones as if the exhaust were an audio system – because, in truth, it is. And there's more, but we'll let Rix explain.  As an aside, for all the Elva does have, we think it's a shame the roadster doesn't have a roofed version. Digital artist Nikita Aksyonov drew up an Elva Coupe, and we're fans. Better looks than the McLaren GT, in a package that appears more compact than the 720S, with a more powerful engine than the Senna? Yes. All day yes. But we digress, so check out Rix's take in the video.

This WRX STI S209 is the rarest (and most expensive) Subaru ever | Behind the Wheel S01 // E08

Behind the Wheel is a video series that shows you a bit of what it’s like to work at Autoblog. The Editors and Video Producers will show you the cars we have in our fleet, and youÂ’ll get a behind the scenes look at some of the personalities that help make the site run. Episode 8 features Senior Producer Christopher McGraw and two Subarus. First, he shows off the best way to sleep in the new Outback XT, whether your camping budget is a hefty $300 or only $10. Then he hops in the most expensive and rarest Subaru ever sold Stateside, the WRX STI S209. Is it worth its $64,000 price tag? Do you camp out of your car? WhatÂ’s your go to setup? Would you ever pay $64,000 for a Subaru? WeÂ’d love to hear from you, so please comment below! Click here for AutoblogÂ’s Camping Gear Guide.   Gear we used to make this video:  Panasonic GH5s Panasonic Lumix 12-35mm F2.8 Rode VidMic Pro Tiffen 58mm Variable ND Filter GoPro Hero 7 Black Adobe Premiere   Camping Gear: Exped MegaMat Duo Therm-a-Rest Z Lite Autoblog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. These deals are available through our affiliate partnership with Amazon.com. Deals are subject to Amazon's schedule and availability.

McLaren Speedtail hits 250 mph over 30 times at Kennedy Space Center

The McLaren Speedtail was billed as having a 250-mile-per-hour top speed when it was revealed over a year ago, and now McLaren is proving it. High-speed testing at the Johnny Bohmer Proving Grounds at Kennedy Space Center in Florida saw a Speedtail prototype named XP2 hit 250 mph over 30(!) times. McLaren chief test driver Kenny Brack was the lucky man behind the wheel mashing the go pedal. It’s impossible to talk top speed and McLaren without mentioning Andy WallaceÂ’s epic runs in the McLaren F1 at the Ehra-Lessian proving ground in Germany. That carÂ’s official record is set at 240.1 mph, and itÂ’s still the fastest production car in the world with a naturally aspirated engine. It managed to attain this top speed record with a 627-horsepower V12 and six-speed manual gearbox. The Speedtail has a hybrid powertrain that puts out a combined 1,055 horsepower and 848 pound-feet of torque. WeÂ’re still waiting on exact details as it concerns the SpeedtailÂ’s powertrain combination of gas engine and electric motor(s). McLaren also announced today that production of the Speedtail has begun at the McLaren Production Center in Woking, UK. These are the first of 106 customer orders set to be built, and deliveries will begin in February 2020. As a reminder, the Speedtail wonÂ’t be road legal in the U.S. due to the three-seat configuration not meeting safety requirements. Regardless, one-third of all Speedtails were sold to American customers, which means those folks will need to apply for a show and display exemption to enjoy their Speedtails. Related Video:

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video:    

Junkyard Gem: 1992 Pontiac Sunbird convertible, with extremely rad W25 Appearance Package

Radwood has sparked a revival in the appreciation of goofy 1980s and 1980s automotive fashions, from neon-colored tape stripes to excessive TURBO badging to ads featuring horrifying Nagel-style women with radio faceplates instead of eyes. I see a lot of discarded cars that would have been ideal to bring to Radwood, and today's Junkyard Gem is even radder than, say, a purple Mercury Tracer Trio or a teal Chevy Beretta GT or even the elusive Dodge Daytona IROC R/T (yes, there were IROC Daytonas): a genuine Pontiac Sunbird SE convertible with the W25 Appearance Package and Bright White Star wheels. The W25 package got you a white Sunbird with kicky script badging, white wheels, and — if you opted for the optional 3.1-liter V6 — these candy-cane-influenced red-and-white displacement badges on the fenders. Now this is rad! The white interior got dirty fast, especially if the owner left the convertible top down, and these wheels were tough to keep clean for more than a few hours. This one appears to have spent many years sitting abandoned with the top down, judging by the completely trashed interior. The base engine for 1992 was the good old Cavalier four-banger, complete with 111 horsepower. This 3.1-liter engine made a respectable-for-1992 140 horses, for plenty of torque-steery, tire-squealy fun. As a J-Body car, the Sunbird was a sibling to the Chevrolet Cavalier in 1992 (the J-based Cadillac Cimarron, Oldsmobile Firenza, and Buick Skyhawk departed before the end of the 1980s). Starting in 1994, the Pontiac Sunfire replaced the Sunbird, continuing in production all the way through the demise of the J platform in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Where (in Canada) would you test-drive your Sunbird? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Almost 70 percent of FCA-PSA Groupe models to ride on two PSA platforms

With the merger between PSA Groupe and Fiat Chrysler having been officially announced this week, we still don't know where everything will settle once the process concludes. We covered the catalog of models herded by the combined company's 12 brands, all of which will remain for now. Profound changes must be afoot somewhere, though, else there'd be no reason for the tie-up. Automotive News has a report on one of the big moves, writing that "more than two-thirds of [PSA-FCA] production would be concentrated on just two platforms." Around 2.6 million cars built by the combined company would sit on PSA's Common Modular Platform, also known as the EMP1, for B-segment city cars, entry-level and mid-range C-segment sedans, and compact crossovers. Three million vehicles would ride on the EMP2 architecture intended for C- and D-segment cars and higher-end crossovers. Those figures account for around 5.6 of the 8.7 million vehicles the combined company expects to sell annually. AN didn't mention the Giorgio platform that's already spread throughout the FCA kingdom to support numerous current and future offerings like the next-gen Jeep Grand Cherokee, but did write that "larger Jeep models will continue to use FCA underpinnings." The body-on-frame chassis' under Ram trucks and the Jeep Wrangler and Gladiator should hold pat. We'll wait for word on the fate of the Compact U.S. Wide platform carrying the Chrysler Voyager and Pacifica and Jeep Cherokee. Dodge products with questionable futures are anyone's guess; we've heard the Dodge Durango, still built on a Mercedes-derived platform it shares with the current Grand Cherokee, could go body-on-frame for the next generation, or die and have the Giorgio-based, three-row Jeep Grand Cherokee take its place. More mystery comes with the long-lived LA and LD platforms in the big sedan and coupe trio Chrysler and Dodge still milk quite successfully. And if there were ever a time for the Dodge Journey – last reported as a Giorgio recipient – to modernize or die, we don't know when that time is. Although FCA platforms have been designed with alternative powertrains in mind, AN says the PSA Groupe architectures "are more modern than FCA's equivalent platforms." After PSA acquired GM's Opel/Vauxhall division, the French company didn't waste time moving the Anglo-German products to in-house platforms, helping to put the formerly money-losing operations into the black in just 18 months.

Hyundai to buy electric vehicle batteries from SK Innovation, according to report

SEOUL — Hyundai Motor and affiliate Kia Motors have decided to secure electric vehicle batteries from SK Innovation for the next four to five years, Maeil Business Newspaper said on Friday, citing industry sources. The sources said the deal was worth more than 10 trillion won ($8.6 billion). SK Innovation, Hyundai Motor and Kia declined to comment. Hyundai Motor said in October it would launch 16 EV models by 2025, aiming to boost EV sales 560,000 by then, a level that would be equivalent to more than 10% of its projected global sales this year. Reporting by Hyunjoo Jin. Related Video:    

Mitsubishi and NTT to buy 30% stake in HERE digital mapping company

Digital mapping company HERE Technologies sold a 30% stake to Mitsubishi and Nippon Telegraph and Telephone Corp (NTT), diluting German carmakers’ stake to 54% amid uncertainty about the profit potential from autonomous cars. Mitsubishi and NTT will co-invest in the Amsterdam-headquartered company through their newly established, jointly owned holding firm COCO Tech Holding B.V. in the Netherlands, HERE said on Friday. “Their investment also means we are further diversifying our shareholder base beyond automotive, which is important given the appeal and necessity of location technology across geographies and industries,” HEREÂ’s Chief Executive Edzard Overbeek said. The Japanese companies said they would collaborate with HERE to develop services such as ways to tackle road congestion and improve supply chain efficiencies. High definition maps can also be used in fleet management, asset tracking, last-mile delivery, long-distance package delivery by drones and indoor mapping applications, Overbeek told Reuters. Financial details of the transaction, which they said would close next year, were not disclosed. German carmakers BMW, Audi and Daimler saw high definition mapping as a strategic asset and bought HERE from Finnish telecoms group Nokia for around 2.5 billion euros ($2.8 billion) in 2015 to avoid becoming dependent on AlphabetÂ’s Google. FridayÂ’s deal dilutes the stake held by each German carmaker from 25% to just under 18%, HERE said. REALITY CHECK Tech companies and automakers raced to develop self-driving vehicles after Google presented a prototype car in 2012, leading German manufacturers to develop robotaxis as a way to enter the ride-hailing business to take on Uber. However, the technology costs and regulatory hurdles have spiraled, and ride-hailing businesses have struggled to reach sustainable profitability, leading to a reassessment of the business potential of robotaxis and ride hailing. “There has been a reality check setting in here,” Daimler Chief Executive Ola Kaellenius said last month, adding that spending on robotaxis would be “rightsized.” The move comes as BMW and Daimler this week announced they will exit the North American car-sharing market, halting operations in Montreal, New York, Seattle, Washington D.C., and Vancouver, as they focus on the European market. Last year, GermanyÂ’s Continental and Bosch, the worldÂ’s largest automotive suppliers, bought a 5% stake in HERE.

Mazda recalls 2019-2020 Mazda3 for errant activation of emergency braking system

The newly redesigned Mazda3 has been subject to numerous recalls since it went on sale for the 2019 model year. Today brings news of another such occurrence, as Mazda recalls 35,390 2019-2020 Mazda3s (sedans and hatchbacks). This recall is related to the automatic emergency braking system equipped to certain models. According to Mazda, affected vehicles may “unexpectedly stop while driving due to inadvertent activation of the Smart Braking System automatic emergency braking system.” The programming of the systemÂ’s software could cause the Mazda3 to “falsely detect an obstacle in front of the vehicle while driving.” In response to that detection, the software may automatically apply the brakes despite no collision being imminent. We donÂ’t have to explain how dangerous that could end up being for the driver and those around them. Your car slamming on the brakes for no reason could easily be the cause of an accident. As of now, Mazda says no injuries or deaths have been reported as a result of the defect. In case you havenÂ’t experienced the system in your Mazda3 yet, there is something to look out for. Mazda says a warning alarm will sound and a warning message will appear in the instrument cluster and head-up display when the car is about to perform an emergency stop. Mazda said that itÂ’s reported the defect to the NHTSA, but it hasnÂ’t been posted on the website yet. The fix is easy for some, but more difficult for others. Vehicles with early build dates will need the whole instrument cluster replaced or reprogrammed, as these cars have a different procedure for "temporary manual deactivation of the Smart Braking System." These early build cars will also receive a new owner's manual to reflect the revised procedure of temporary manual deactivation of the system. Later cars will only need the Smart Braking System software reprogrammed with an improved version. Mailings to owners for notification purposes should be completed on or before February 17 next year.

The Fisker Ocean's solar roof opens up in 'California Mode'

Henrik Fisker has pegged CES for the official unveiling of his upcoming Ocean SUV. The production prototype will make its public debut on January 7, 2020, with an intended launch in 2020. Leading up to the event, Fisker has been slowly dropping bits of information, and we've already seen nearly the entire vehicle. The most recent announcement showed off a new patented feature called California Mode, which at the press of a button can lower all the Ocean's windows and slide open its solar roof panels as well. In total, pressing the California Mode button moves nine different panels. The three windows on each side of the SUV go down, the rear hatch's glass drops into the body, and the two panels that make up the solar roof shift to open, as well. Fisker didn't release a video of the action, but it appears the front-most part of the solar panel overlaps the rear portion and both slide back. The photos take the opportunity to show that with the rear glass down, a surfboard could fit inside the car with only a small bit sticking out. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Fisker bills the Ocean as a pinnacle of sustainable automotive engineering. It runs purely on electricity and will have an estimated range of 250 to 300 miles. Parts of the SUV will use recycled materials and plastics, as well, to create a vegan interior. Fisker says the solar tech could potentially add up to 1,000 miles of range per year, although that really isn't much. The California-based company is also aiming to make the vehicle affordable and accessible. Fisker says the car will be available on a subscription basis with a starting price of $379 per month and no long-term contract. Reservations are open now for $250. We'll have more information and photos after the debut next month. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Here are all the vehicles sold by the 12 brands of the Fiat Chrysler PSA merger

Sven Gustafson and Ronan Glon contributed to this report. Whether or not the formal merger between Italian-American automaker Fiat Chrysler and European conglomerate PSA Group means the return of Peugeot to the U.S., one thing’s for certain: The combined company will have a truckload of different brands. Sorting out what the deal means for all of them, including where they are sold and built, and whether and where there is product overlap, will be a key question for the two companies as they formalize the merger over the next 12 to 15 months. So far, both sides have steadfastly insisted that no job cuts or plant closures will result from the tie-up. WeÂ’ll see about that. In the meantime, weÂ’ve compiled an alphabetical list of all the vehicles currently sold in Europe and in North America by the various FCA and PSA brands, along with the years they debuted. We've gone into more detail about the European vehicles you might be less familiar with. The joint empire also has an antique store's worth of heritage-laced models and dormant brands, like Plymouth, Imperial, Simca, and Panhard, and it would have been even bigger had FCA not spun off Ferrari in early 2016. Alfa Romeo A legacy Italian sports car brand with roots in racing, Alfa Romeo has been struggling with declining U.S. sales. Giulia (2015): AlfaÂ’s rear-wheel drive sports sedan competes against German luxury sedans in North America and Europe. 4C (2013): The lightweight mid-engine rear-wheel-drive sports car is being phased out. Stelvio (2016): The Stelvio is a small luxury performance crossover that competes against the likes of the Porsche Macan and BMW X3 and is sold in both Europe and North America. Giulietta (2010): Sold in Europe, this compact hatchback is AlfaÂ’s entry-level model. After initially planning a rear-wheel drive 2020 update, the Giulietta is reportedly being nixed as part of FCAÂ’s latest product plans.   Chrysler Despite lending its name to its parent company, questions abound about the future of this legendary but faded brand, which is not offered in Europe. 300 (2011): Despite rumors of its pending demise, the four-door sedan lives on mostly unchanged for the 2020 model year, at least. Pacifica (2016): The successor to the Town & Country is ChryslerÂ’s bestselling model by a long shot and comes in gas-only and plug-in hybrid versions. Voyager (2019): ChryslerÂ’s newest minivan launches as its entry-level minivan for the 2020 model year.

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

2020 Toyota Highlander vs other 3-row crossovers: There can only be one!

We've done quite a few spec comparison posts involving three-row family crossovers, and when included, the Toyota Highlander has always been the runt of the group. While the rest increasingly seemed to be benchmarking each other toward greater girth, the Highlander was the outlier.  That changes a bit for the 2020 Toyota Highlander, but only a bit. It's now larger and more competitive, specifically in regards to the amount of cargo space aft of the third-row seat. As you can see below, this aligns the Highlander most closely to its long-time competitor the 2020 Honda Pilot. However, let's see how it stacks up to others in the segment, which is heavily populated now, so for the sake of space, we've selected the newest entries: Kia Telluride, Hyundai Palisade, Subaru Ascent and Ford Explorer. The order in which they are presented is random.  Performance and fuel economy The 2020 Highlander is more than 200 pounds lighter than its predecessor, but has the same 295-horsepower V6 engine that was already one of the strongest in the segment. We'd say that would give it a leg up, but the Pilot and Explorer have proven to be sprinters, delivering 0-60 times in the low-6 range by some publications' stopwatches (or VBoxes, whatever). We don't expect the Highlander to beat them, but it may dip into the 6's. The heavy, less-powerful Subaru Ascent is most likely to take up the rear. It's fuel economy of 23 mpg combined also matches the Highlander and Explorer for segment-best. Remember, however, that the Explorer's turbocharged inline-four engine is likely more susceptible to differences in driving style (read: a heavy foot).  Of course, if you're really interested in fuel economy, the Highlander and Explorer are the only vehicles in the segment to offer hybrid versions. The Ford Explorer Hybrid puts a greater emphasis on performance, however, resulting in lower estimates of 25 mpg combined (AWD) and 28 mpg combined (FWD). By contrast, the new 2020 Toyota Highlander Hybrid is estimated to return 36 mpg combined.  Passenger and cargo space According to Highlander chief engineer Yoshikazu Saeki, he had a choice of two directions with the new Highlander. He could have indeed made it bigger, matching these very competitors, especially in terms of third-row and cargo space. Or, he could have maintained a smaller-than-average size. He obviously chose the latter. First, it was the size customers had come to expect. Would they be put off by something bigger?