Blog

Ford delays North American production restart from coronavirus lockdown

Ford said on Tuesday it was postponing its plan to restart production at its North American plants due to safety concerns for its workers amid the coronavirus pandemic. To generate cash, the No. 2 U.S. automaker had said last week it was poised to restart production at some plants in North America as early as April 6, bringing back such profitable vehicles as its top-selling F-150 full-sized pickup, the Transit commercial van and SUVs. But on Tuesday, Ford said it had been aiming to resume production at several key U.S. plants on April 14, but would now instead do so at dates it would announce later on. "The health and safety of our workforce, dealers, customers, partners and communities remains our highest priority," Kumar Galhotra, president of Ford's North American operations, said in a statement. Still, the automaker will open a plant in Ypsilanti, Michigan, during the week of April 20, that will make ventilators to treat patients afflicted by the coronavirus. Rival Fiat Chrysler Automobiles said last week it plans to resume production in North America on April 13. General Motors has shuttered its plants indefinitely and has not provided a date for vehicle production to restart. It is facing a delay in the production launch of its redesigned large SUVs and is delaying work on other SUVs. "Once it is safe to resume production, we will do so," a GM spokesman said. As of Monday, Volkswagen was shooting for an April 5 reopening at its Tennessee plant. Honda, Nissan and Subaru facilities in North America will remain closed through April 6, and Hyundai through April 10. Toyota was planning to reopen its North American plants April 17. Plants/Manufacturing Chrysler Fiat Ford GM coronavirus

2020 Genesis G80 3.3T Sport Drivers' Notes | A big luxury sedan bent on sport

The 2020 Genesis G80 Sport is meant to be the driving enthusiast’s pick of the G80 line. It comes with the 3.3-liter twin-turbo V6 as standard, pumping out 365 horsepower and 376 pound-feet of torque. Genesis doesnÂ’t quote a 0-60 mph time, but the sedan gets up and goes in a hurry. The Stinger GT has the same engine with 600 pounds fewer to lug around, and it hits 60 mph in 4.7 seconds. The G80 doesnÂ’t pull quite as hard, but itÂ’s not terribly far behind. This midsize sedan is also packing GenesisÂ’ adaptive dampers that firm up in Sport mode to keep body motions in check. The electric power steering system is rack-mounted for better feel, and it even has bigger brakes to resist heat buildup. Various appearance touches like copper accents throughout the car, more aggressive blacked out trim and a quad exhaust let you know itÂ’s the Sport trim, as well. All in, the G80 Sport is a fairly comprehensive package that offers up a tangible performance increase over the standard sedan. Pricing is straightforward, too. Genesis makes every package standard when you go for the 3.3T Sport trim, so the starting price is $56,775. Our tester didnÂ’t have any accessories tacked on, so the final price was the same $56,775. Of course, you may have heard the news about the new 2021 Genesis G80 already. Read on as we put the new car into context with this original G80 sedan on its way out. Editor-in-Chief Greg Migliore: The 3.3-liter twin-turbo V6 is the sweet spot for the G80. With 365 hp and 376 lb-ft of torque, it slots in neatly between the 5.0-liter V8 and the 3.8-liter V6. The turbo six has plenty of power for all driving situations, and it gives the G80 a sporty feel. ItÂ’s just the right amount to have fun. You really donÂ’t need theV8 in the G80, and the 3.8 liter, while solid, doesnÂ’t have the guts of the 3.3 turbo. This engine is the heart of the aptly named 3.3T Sport trim Genesis added for 2018, and itÂ’s certainly enjoyable. Looks good, too. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Road Test Editor Zac Palmer: The Genesis G80 is an expensive car. That said, Genesis still managed to undercut the German competition with this large, luxury sport sedan. A Mercedes-Benz E 450 starts at $62,545, and that price is just the beginning. Genesis loads up the Sport model with a full load of niceties for its base price.

GM's redesigned full-size 2021 SUVs face delay over coronavirus

As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.

Fiat Chrysler execs, salaried employees taking pay cuts during coronavirus pandemic

Fiat Chrysler Automobiles' top executives and salaried workers around the globe will take pay cuts in an act of "shared sacrifice" brought on by the coronavirus pandemic that has shuttered the automaker's plants in Europe and North America, according to a company memo seen by Reuters. Chief Executive Officer Mike Manley said in the memo he will take a 50 percent pay cut for three months starting April 1, while Chairman John Elkann and FCA's board of directors will forego the remainder of their 2020 compensation. FCA said most global salaried employees will be asked to take a temporary 20 percent pay cut. "Protecting the financial health of the company is everyone’s responsibility and naturally starts with myself and the leadership of FCA," Manley wrote. Members of the automaker's group executive council will also take a 30 percent pay cut, according to the memo. Last week, No. 1 U.S. automaker General Motors said it planned to keep its plants closed indefinitely and was reducing the pay of salaried employees and executives and suspending some future product programs to conserve cash. GM's chief executive and chief financial officer issued a stark warning to company employees in an internal video, saying that "significant austerity measures" were needed to preserve the companyÂ’s long-term viability. Ford also said it was temporarily cutting top executivesÂ’ salaries.  

Man arrested after teaching his dog to drive a Buick 100 mph

A Washington state man riding shotgun in an old Buick was arrested after fleeing a hit-and-run incident and leading police on a high-speed chase on an Interstate freeway. Meanwhile, the driver, his pet pit bull, got off scot-free. Such was the scene Sunday near Seattle, where police arrested a 51-year-old man from Lakewood, Wash., who told them he was teaching his dog how to drive. The man was apparently steering the car from the passenger seat. Reports say the man, whose name was not released, was driving his 1996 Buick on Interstate 5 when he allegedly struck two vehicles in South Seattle near the Boeing Access Road and then fled north on I-5. The car was spotted on the interstate near the Snohomish River in Everett, and officials told KOMO-TV the vehicle was driving more than 100 miles per hour when they began pursuit. The vehicle left the freeway near the Stanwood exit — 57 miles north of the hit-and-run — and then drove onto the nearby Centennial Trail, a rails-to-trail bike path. The chase finally ended after police were able to deploy spike strips. Police found the man seated in the passenger seat and his dog behind the wheel. The man appeared to have been steering for the canine. The man was arrested on suspicion of DUI, reckless driving and hit-and-run feeling eluding. Weird Car News Buick

2021 Genesis G80 interior looks spectacular in its many colors

We've recently shared a number of new details about the 2021 Genesis G80 luxury sedan. And while we learned some interesting things about engines and such, we're still fixated on how gorgeous the car's interior is. The design itself is elegant, and minimalist thanks to a low dash, full-width air vents and few swoops, bends or creases in the panels. Fancy technology like a 3D instrument display and a huge 14.5-inch infotainment make it modern, too. It all really pops in the dark brown over dark blue color scheme that was revealed along with three other options now that the car's configurator is live. We're also fans of the all brown combination. You can see each choice in the gallery above. Naturally, exterior colors have also been unveiled. There are 10 hues to pick from, and they're all fairly typical luxury car fare: dark colors and multiple shades of gray, white and black. They all look good on the G80's gracefully curving body, which we would argue is the best execution of the company's corporate design set by the Essentia coupe concept. The full list of colors is below, along with a gallery of them. Feel free to list your favorite builds in the comments. Black Forest Green Porto Red Adriatic Blue Tasman Blue Gold Coast Silver Savile Silver Himalayan Gray Vik Black Uyuni White Alta White Genesis G80 exterior View 10 Photos

Dominic Toretto's 'Fast and Furious' Lego Dodge Charger lives its life a quarter mile at a time

Fan of the "Fast and Furious" franchise and Lego kits? You're in luck. The brick-builder announced that it is now taking pre-orders for a new kit dedicated to the 1970 Dodge Charger widebody driven by Dominic Toretto (Vin Diesel) in the car heist film series.  The release of the latest installment in the "F&F" franchise may have been delayed until next year, but for better or worse, a lot of merchandising that was in the works to cross-promote the new film is still in the pipeline.  The approximately 1,100-piece Technic-line kit can be posed both on four wheels and in a wheelie stance thanks to a flip-down prop stand (which itself looks a bit like a misplaced wheelie bar). The kit includes details such as a trunk-mounted dual-bottle nitrous kit, a detailed roll cage, and other nods to the long-running movie car.  "With 1,077 pieces, this cool building set provides a fun challenge for kids who love toy model cars. Inspired by the original 1970s Dodge Charger R/T, this faithful replica is packed with realistic details," Lego's product page says. The kit features several moving parts, too, including the wheels, suspension, supercharger induction system and steering. It measures more than a foot long (15") and even comes with authentic California replica plates.  Those who want a kit will be able to pre-order it from the Lego website, with shipments starting on April 27. Those who want to roll the dice on retail availability will be able to shop for it in local stores the same day, provided those stores are open, of course.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Building The Fate Of The Furious Cars | Autoblog

Filmmaker explains how to shoot a Bugatti Chiron accelerating to 248 mph

Bugatti set a world record in 2017 when a Chiron traveled from zero to 248 mph (400 kph) to zero in 42 seconds. It caught the record on film, but it has never revealed how it captured footage of a 1,500-horsepower car traveling at nearly four times the speed limit of an American interstate. Filmmaker Al Clark revealed his secrets in a video. It was clear from the beginning of the project that simply placing a GoPro on the dashboard and hitting "record" wouldn't have cut it. Bugatti wanted a feature-quality film that showed the car from many different angles, so Clark worked with some of the most talented names in the automotive film industry to make it happen. The scenes showing the Chiron from above were filmed using an Aerospatiale 355N Ecureuil helicopter because a drone would be too slow to keep up with the car, and it wouldn't be able to stay in the air long enough.  German studio Format67 provided a Caterham Seven transformed into a film car to capture some of the car-to-car footage. The crew also borrowed its hood to use as a shield against reflections during one of the photo shoots. It's quick and agile, so it's well suited to performing camera car duty, but it can't keep up with a Chiron. "I love real speed in shots. I think it's so important that the cars are doing something approaching their real speed, because when you start to speed up stuff everything looks wrong," Clark explained. Putting footage on fast forward wasn't an option, neither was attaching the camera to a cable and pelting it down the track. The answer was surprisingly simple: The crew used another Chiron as the camera car and launched them at the same time. The record was set on Volkswagen's test track in Ehra-Lessien, Germany, which is also where a 304-mph Chiron became the fastest car in the world in 2019. The main straight is long and smooth, so the footage captured was perfectly steady in spite of the head-spinning speed; Clark even chose to dial in a little bit of camera shake during the editing process. It wasn't perfectly in focus, though, because the camera filmed through the exhaust gases, and the system gets extremely hot when the quad-turbocharged, 8.0-liter 16-cylinder engine is giving its all. Juan Pablo Montoya, the courageous Indy 500-winning pilot who set the 2017 record, said "it was all quite easy." Clark's firsthand account confirms the same can't be said about capturing the feat on video. Related Video:       Bugatti Technology Gadgets Luxury Performance

Saab didn't want this electric, 99-like delivery van from the 1970s

National Electric Vehicle Sweden (NEVS) purchased the remains of Saab in 2012 to turn it into an electric-only brand. While its vast heritage is turbocharged and rooted in racing, Saab didn't shy away from dabbling in battery-powered drivetrains, and there's an experimental mail delivery van in its official museum to prove it. The name Saab in the last paragraph should be followed by an asterisk. The prototype kind of looks like a 99 when viewed from the front, and it wears the soccer ball-style alloy wheels seen on several of the brand's models during the 1970s, but the museum's curator told Autoblog it was built in Linkoping, Sweden, by the company's defense and plane-making division. It's certainly a Saab, but not quite the kind you're likely thinking of. Engineers began the project in the early 1970s, at about the same time archrival Volvo launched its own experiments in the field of electrification. The idea was to create an electric, short-range distribution van that could be used by Sweden's postal service, for example. Two prototypes were built in 1975 and 1976, including the example in the museum, and each had a low-speed driving range of about 40 miles. Additional technical specifications are lost to history, partly because Saab's car-building division in Trollhattan -- the folks that developed the 99 and the 900, among others -- didn't like the van at all and wanted nothing to do with it. Saab electric van prototype View 2 Photos We peeked inside and under it and spotted a bulky, lead-acid battery pack integrated into a tray that could be pulled out from the back after flipping up the panel onto which part of the rear bumper was mounted. This layout was relatively common in early electric prototypes, like the Bus that Volkswagen developed in 1972 and tested in select German cities. Recharging the battery pack took hours, so swapping it out was considered the more practical alternative. Period documents and images confirm the electronics were mounted under the hood. Saab made two electric prototypes, including one it fitted with front-end parts like headlights (complete with wipers), turn signals, and a plastic grille from a 99. The second wore round headlights, bullet-shaped turn signals, and looked more like something you'd see in an episode of "Scooby Doo" than what you'd find in a Saab showroom. The van's resemblance to the 99 was purely artificial; it was its own thing, on its own chassis.

Britain orders 10,000 ventilators from F1/McLaren/Mercedes/Ford/Rolls-Royce/Airbus

Paramedics and ambulance personnel get instructions from a command unit outside London's ExCel Centre arena, which is being turned into a 4,000 bed temporary hospital called NHS Nightingale to deal with coronavirus patients. The hospital is due to open Monday, March 30. / AP     LONDON — Britain has ordered 10,000 ventilators from a consortium of leading aerospace, engineering and Formula One racing companies which will start production this week in response to an urgent government call for industry to help save lives. The 27-strong team, including Airbus, BAE Systems, Ford and Rolls-Royce, have joined forces to ramp up production of a ventilator made by Smiths Group, which supports those with complications from COVID-19. The consortium, which also includes seven Formula One teams including McLaren and Mercedes, home to World Champion Lewis Hamilton, said they had pulled staff off existing projects to meet the national need. Some 1,228 people have died from coronavirus in the United Kingdom and a senior health official said on Saturday the country would be doing well if it manages to keep the death toll below 20,000. "This consortium brings together some of the most innovative companies in the world," Dick Elsy, the head of the consortium, said in a statement. "I am confident this consortium has the skills and tools to make a difference and save lives." The United Kingdom, which initially only had 5,000 ventilators available in its National Health Service, has been trying to secure additional supplies after realising it needed 30,000 to cope with the peak of the outbreak. Prime Minister Boris Johnson, who is now in isolation in Downing Street after testing positive for coronavirus, made an emergency appeal earlier this month for manufacturers to retool their production lines and start making specialist health equipment including ventilators. Britain now has about 8,000 ventilators, with another 8,000 on order from international manufacturers that are due in coming weeks. Last week it placed an order for a newly-designed model from the vacuum cleaner company Dyson that will need to be approved by the health regulator. Mercedes part of a separate effort, too Separately on Monday a second consortium including Mercedes Formula One and other F1 teams said it had developed in less than a week a new version of a breathing aid that can help coronavirus patients.

2021 Genesis G80 powertrain and technology details revealed

While we already got a look at the 2021 Genesis G80's styling earlier this month, only now has the company revealed details on the car's powertrains and technology. It picks up most of its parts from the also recently revealed Genesis GV80 crossover, but that's not a bad thing. Under the hood will be one of three different engines, only two of which will probably appear in America. The first of those is a new turbocharged 2.5-liter four-cylinder making 300 horsepower and 311 pound-feet of torque, which is slightly less power and slightly more torque than the current naturally aspirated 3.8-liter V6 offered in America's base G80. The second is a turbocharged 3.5-liter V6 making 375 horsepower and 391 pound-feet of torque, making it more powerful and torqueier than the current turbo 3.3-liter V6. Both of these are shoe-ins for the U.S., and they're also shared with the GV80. The third engine option is a turbocharged 2.2-liter diesel four-cylinder that is likely only for overseas markets. It makes 210 horsepower and 325 pound-feet of torque. The current G80's optional 5.0-liter V8 will go away with this generation. Each powertrain will be available with rear-wheel drive or all-wheel drive, and they will probably be mated exclusively with an 8-speed automatic transmission. Genesis didn't just upgrade engines, though. The company has made the car substantially lighter, in part to additional use of aluminum. Comparing the current lightest V6 to the new four-cylinder, the car weighs over 250 pounds less. Genesis also says it has improved the car's sound insulation, door seals and wheel design to make it quieter. The car can be stuffed with technology, too, with adaptive suspension that adjusts based on what it sees in the road. Standard is advanced cruise control that manages speed, steering, lane-centering, and will execute lane changes when prompted. Unsurprisingly, automatic emergency braking and blind-spot monitoring are standard. It also has the highly publicized Smart Park system like in the Hyundai Sonata. Inside, the G80 is available with a 12.3-inch 3D instrument screen and a 14.5-inch touchscreen infotainment system. Important to note is the fact the 3D display can also switch to a 2D mode for anyone uncomfortable with the 3D effect. Connectivity to smart home assistants and over-the-air updates are also a part of the G80's suite of technology features. The G80 will go on sale in the second half of this year. Pricing has not been announced yet.

Maserati Pelletessuta models bring their Italian fashion to the U.S.

Maserati's partnered with Italian fashion house Emenegildo Zegna for seven years, going back to the Maserati Quattroporte Ermenegildo Zegna Limited Edition Concept worked up as part of Maserati's centennary celebrations in 2014. At last year's New York Auto Show, the pair debuted the results of another collaboration, the new Pelletessuta woven leather interior. Working with hide as it would with yarn, Zegna wove thin strips of lightweight Napa fabric for 100 special edition vehicles that the Italian automaker pledged for the U.S. market and said it would never build again. After previews during Monterey Car Week in August, the 100 limited edition models have finally reached U.S. dealerships. Until they're sold out, the two models will stand here as the carmaker's fullest expression of Italian prowess. Meanwhile, in Italy, Maserati made a gesture towards its compatriots and its country by lighting the towers at its Modena headquarters in the three hues of il Tricolore, the Italian flag. There are 50 examples of the 2020 Quattroporte S Q4 GranLusso, which already comes with a Luxury Zegna Package interior compared to the entry-level Quattroporte. Each special model wears a custom Blu Sofisticato metallic paint with blue brake calipers. Inside, dark brown Pelletessuta interior includes sport seats for the front passengers and a Zegna badge to highlight the work. It's joined by 50 examples of the 2020 Levante S GranSport dressed in Bronzo Tri-Coat and 21-inch polished Helios rims, those wheels an inch larger than the standard units. The Levante interior gets tailored in black Pelletessuta fabric, accented with custom Radica wood trim — radica being a kind of veneer or parquet with a history in Italian luxury. The news about U.S. arrival didn't come with prices, though, so the interested will need to make the call to a dealer for information. Since the Quattroporte S Q4 GranLusso starts at $114,485 after destination and the Levante S GranSport at $91,985, those are good baselines to add to the required premiums for exclusive upgrades and low volume. Related Video:

Lexani Motorcars unveils plans for 2021 Cadillac Escalade Mobile Offices

Lexani Motorcars is an aftermarket shop that specializes in high-end luxury customizations for a variety of large SUVs and vans. The Corona, Calif. company aims for business-class-type vehicles, rather than "Pimp My Ride" hack jobs, and has recently been working on 30-inch extended mobile office conversions, among other projects. Up next: the 2021 Cadillac Escalade. Lexani Motorcars, not to be confused with Lexani wheels, took to Instagram to show off a vision for a custom office setup for the new-generation 2021 Escalade. Cadillac's large SUV would be extended by 30 inches and outfitted with a plethora of over-the-top luxury options. Lexani's most extreme additions include armoring, but their toys don't have to be that serious. The most immediately noticeable feature in the Escalade is the starlight headliner. Similar to what's seen in certain modern Rolls-Royces, the starry ceiling is not necessarily a new feature for Lexani Motorcars, but the design has evolved. This most recent interpretation looks like it has a specialized design, possibly one that mimics a real part of the sky.  The Mobile Office includes four massive captain's chairs, each of which has motorized functionality and quilted leather. In between each set of seats is an integrated iPad tablet, and more are seen built into the walls of the SUV. Each seat also has a fold-out desk and foot rests for reclining.  Furthermore, the Mobile Offices include hideaway big-screen TVs that pop up behind the rear seats. Other options include satellite, curtains or shades for the windows, custom trim pieces made out of high-end materials such as carbon fiber or real metals, cooled storage for drinks, and storage compartments for libation stemware. Lexani Motorcars does not list a price, as each car is configured per the customer, and it does not mention when the new Escalades will become a reality. The Escalade was originally estimated to launch in late 2020, but it's unclear whether or not that will be affected by the current production stoppages due to coronavirus.           View this post on Instagram                   Now accepting pre-orders on 2021 Escalade Mobile Offices ? Inquiries: info@lexanimotorcars.com A post shared by Lexani Motorcars (@lexanimotorcars) on Mar 23, 2020 at 3:22pm PDT           View this post on Instagram                   Look forward to rush hour?

Junkyard Gem: 1982 Chrysler LeBaron Convertible

Things looked very grim at Chrysler during the late 1970s, as Oil Crisis-shocked car shoppers avoided buying thirsty land yachts and ancient-technology compacts in droves. The Carter administration grudgingly bailed out the company with loan guarantees in 1979 (leaving "small enough to fail" American Motors to seek help from the French government) and Chrysler needed a huge sales hit in a big hurry. Under the leadership of Lee Iacocca (freshly canned by Henry Ford II), Chrysler developed the modern, front-wheel-drive K Cars and the company was saved. The very first K Cars hit the road for the 1981 model year, and I'm always on the lookout for those historic early Ks when I'm searching for interesting bits of automotive history in junkyards. The '81 and '82s have become nearly impossible to find, but this once-plush LeBaron convertible appeared in a Northern California yard last month. While a bafflingly complex family tree of K-derived vehicles grew up in Chrysler showrooms through 1995 (including the hot-selling Caravan/Voyager/Town and Country minivans), the only "true" US-market K-Cars are the Dodge Aries, Dodge 400/600 coupe, Plymouth Reliant and Chrysler LeBaron. 1982 was the first model year for the K LeBaron and this car was built in March of that year, so we're looking at one of the very early successors to the Dodge Diplomat-based LeBarons of the 1970s. Chrysler developed a homegrown 2.2-liter, overhead-cam straight-four engine that proved very successful, and a 94-horsepower version of that engine was the base powerplant for the 1982 LeBaron. This car appears to have just about every option available that year, so of course the original buyer went for the 2.6-liter Mitsubishi Astron straight-four. With hemispherical combustion chambers, the 2.6 could be called a Hemi (a few Ks even got "2.6 HEMI" badging); horsepower came to just 93 in 1982, but the 132 pound-feet of torque beat out the 117 lb-ft of the Chrysler 2.2 that year. Silver-faced gauges and complicated radio controls were all the rage during the Late Malaise Era, and this car has both. Note the Chronometer next to the HVAC controls, a digital design with green vacuum-fluorescent display lifted from the previous-generation rear-wheel-drive LeBaron. The non-cloth bits of the convertible-top mechanism look decent enough, so perhaps some junkyard-shopping LeBaron owner will rescue them.

2020 GMC Sierra gets small price bumps, package discounts and tweaks

A couple of months ago we covered a brace of changes GMC made to the 2020 Sierra 1500. Those included availability of the 2.7-liter turbocharged four-cylinder with 310 horsepower and 348 pound-feet of torque, the 5.3-liter V8 getting the 10-speed automatic transmission, the CarbonPro Editions debuting for AT4 and Denali trims, and a new bed view camera. But GMC has made a few more smaller changes throughout, as GM Authority found, part of a detailed overhaul among GM's pickup lines that's already changed trim names, trim volume, and prices on the Chevrolet Canyon and GMC Colorado. We'll start with MSRP adjustments on the 2020 Sierra: 4WD drivetrains in SLT, and the AT4, and Denali trims that only come in 4WD, see a price increase of $200. There are also more MSRPs to consider this year, with a handful of new Elevation models filling price gaps.  The only changes inside are AT4-logoed all-weather floor liners that come standard for that trim, and adaptive cruise control joining the Driver Alert Package II available on the SLT, AT4, and Denali trims. Speaking of packages, the Value Packages represent truth in advertising. The new base-model Sierra Sierra Value Package costs $860 to combine the Convenience Package and Trailering Package. Those two cost $1,640 when ordered separately. Sticking with the base trim, the Chrome Exterior Package disappears because the chrome bumpers it added are now the standard finish. Black bumpers front and rear can be ordered at no charge, and the 17-inch Bright Silver painted aluminum wheels can be ordered alone. One trim up, the SLE Value Package lumps Convenience and Trailering, too, but it only costs $380, which is $15 less than the Trailering Package by itself. The Elevation Value Package gets cut by $1,330 to $585. On the AT4 trim, GMC dropped the price of the CarbonPro Package from $1,060 to $560, and the Premium Package comes down by $500 as well. The same $500 discount applies to the SLT Premium Package. The new 2.7-liter turbocharged four-cylinder is the optional engine on the base, SLE, and Elevation trims, saving $235 on the first trim and $395 on the other two compared to ordering the standard 4.3-liter EcoTec V6. Smokey Quartz Metallic exterior paint is expected to disappear come Q2. Two new wheels enter the range in the upper reaches, one being a 20-inch Carbon Grey painted rim available on the AT4 CarbonPro Edition.

Mazda6, Honda CR-V and an Autoblogger's BMW Z3 | Autoblog Podcast #620

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by West Coast Editor James Riswick and Road Test Editor Zac Palmer. First, they talk about the cars that have been in their driveways, like the Mazda6, Lexus UX 250h and Honda CR-V, as well as Riswick's own BMW Z3 (where he actually recorded the podcast from). Then they discuss the news, which includes car dealers moving to digital commerce and other updates about — you guessed it — coronavirus, and how it's affecting the automotive industry. Finally, they take to Twitter to help a follower choose a weekend convertible for long, isolated drives in this week's "Spend My Money" segment. Autoblog Podcast #620 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving 2020 Mazda6 Signature 2020 Lexus UX 250h Honda CR-V 1998 BMW Z3 2.8 Virtual dealers Coronavirus update Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

No expense spared: Bugatti explains how it 3D-prints exotic metal parts

Bugatti deputy design director Frank Heyl told Autoblog his team doesn't balk at using the most expensive materials available, and he meant it. The company described how it 3D-prints titanium and alloy parts to save weight. Look closely at the back end of the 304-mph Chiron Super Sport 300+ or the agile Chiron Pur Sport and you'll spot 3D-printed titanium components. They're the intricately-designed covers installed over the exhaust pipes; they stick out from the carbon fiber diffuser. Each part weighs four pounds, which makes it 2.6 pounds lighter than the one fitted to the standard Chiron. It's one of the weight-saving measures Bugatti took to create both cars. Manufacturing the part requires firing up four 400-watt lasers that stack 4,200 individual layers of metal powder on top of each other while fusing them. The part is extremely thin in places but remarkably solid thanks to what Bugatti refers to as a "bionic honeycomb" structure, and it's capable of withstanding temperatures of up to 1,200 degrees Fahrenheit. That might sound like overkill, but keep in mind the cover is on the receiving end of a 1,500-horsepower, 16-cylinder engine. The exhaust system gets really hot, really quickly under heavy acceleration. Bugatti began using 3D printing in 2018, and now the Chiron Sport, the Divo, the one-off La Voiture Noire, and the Centodieci all use components made with 3D-printed metals. The part that covers the Sport's four visible exhaust tips (there are six in total) is notably manufactured using Inconel 718, a nickel-chrome alloy whose audial resemblance to a mid-engined model is purely coincidental; it's not a blend of molten Porsches. It's a material normally used in gas turbines, the blades attached to airplane engines, space ships, and even rocket engines. Making the cover takes several days. Engineers scan every part they produce with a computer tomograph to detect air bubbles that can get trapped between the layers during the printing process. If there are none, the part is blasted with a material named corundum, painted, and sent to the Bugatti Atelier in Molsheim, France, where it's checked yet again before it's installed on the car. Few exhaust tips have such a fascinating story to tell. "The advantage of the 3D printing process lies in the geometric shapes that are possible," said Nils Weimann, Bugatti's head of body development.

Fiat Chrysler agrees to new $3.8 billion credit facility with banks

MILAN — Fiat Chrysler said on Thursday it has agreed a new credit facility with two banks, at a time when major carmakers are having to shut down plants, losing revenue as demand slumps in the wake of the coronavirus. Most of FCA's plants around the world are currently shut in response to the virus emergency. Italian investment firm Exor, which controls FCA, said on Wednesday that the temporary closures might continue and increase depending on how the coronavirus outbreak develops. FCA said the credit facility would be available "for general corporate purposes and for working capital needs" of the group and that it was structured as a "bridge facility" to support its access to capital markets. "This transaction confirms the continued strong support of FCA's international key relationship banks in the current extraordinary circumstances," the automaker said in a statement, without making any explicit link between the new facility and the impact the virus is having on the global economy. The facility can be drawn in a single tranche of 3.5 billion euros ($3.8 billion), with an initial 12-month term which can be extended for further six months. It adds to existing credit facilities worth 7.7 billion euros, including lines for 1.5 billion euros that the company has started to draw down, FCA said. FCA is in merger talks with Peugeot owner PSA to create the world's fourth biggest carmaker. The deal is expected to be finalized by the first quarter of next year. Equita's analyst Martino De Ambroggi said that, based on his new assumption of a 10% drop of global auto market this year, the crisis triggered by the coronavirus would impact the merged automaker's free cash flow by over 5 billion euros. Earlier this week, General Motors announced it will draw about $16 billion from its credit lines in a bid to beef up liquidity amid rising business impact from the fast-spreading coronavirus outbreak. And last week, rival Ford abandoned its 2020 forecast and said it was drawing down $15.4 billion from two credit facilities to bolster its balance sheet. Related Video:

2021 Mini Cooper S Sidewalk Edition priced just under $40,000

Earlier this year, Mini announced the return of the Sidewalk Edition visual package for the 2021 Mini Convertible, one that appeared way back in 2007 with the first drop-top Mini. Now pricing has been announced at a base price of $39,250, and it will arrive at dealer lots in April. While the number of examples is limited in some markets, 150 in the U.K. for example, Mini hasn't announced a cap for American sales. Part of the high price is due to the fact that the special edition is only being offered on the Cooper S trim level, whereas in Europe, it will be available on various trims down to the entry-level Mini One. That means the U.S. version comes with a turbocharged 2.0-liter inline-four making 189 horsepower and 207 pound-feet of torque. It will come standard with a 6-speed manual transmission, but a 7-speed dual-clutch automatic will be available for an additional $1,500, pushing the price past the $40,000 mark. The package is available with either a dark metallic blue or a black paint job with a dark gray top. European models get a few more color options. All models come with custom wheels, badging and a leather interior to match the top. It also includes several optional features as standard including a heads-up display, 8.8-inch infotainment system, heated seats, automatic climate control, auto-dimming mirrors, upgraded sound system, LED headlights and fog lights and proximity locking and unlocking. Related Video:

Behold my hideous Bentley!

Do you all just love my hideous Bentley? It's so insane and tacky. I'm sure if I were to actually order this a British lord somewhere would dispatch his valet to slap me.  Who knows where I'll figuratively be in two weeks' time, but today turns out to be the day I turned to see just how tacky certain car configurators will let you get. Admittedly, they're almost all high-dollar, extra-low-volume cars. If you try to play around on a Honda configurator, you'll have wrapped things up in about 30 seconds.  But Bentley, now that's a company that'll let you get tacky on its configurator. I chose the new Continental GT Convertible because the lowered roof would make it easy to demonstrate in pictures the level of my tackiness. From there, it was this eye-searing Apple Green, though I was certainly tempted by Azure Purple and Magenta. Roof choice? I was expecting there to be more, nevertheless, Claret red seemed like a suitably awful pairing.  Inside, well, let's crack those knuckles and get to work. Luckily, Bentley lets you choose two different leather colors: Main and Secondary "hides" with five choices of how to split those colors. Sorry, colours. I chose Colour Split B cause it seemed to have the most of each colour. For the Main Hide, I went with Hotspur, an extremely red shade of red that would be home in an early 2000s BMW. Cumbrian Green and Damson purple were tempting, but they just weren't bright enough, and I thought they wouldn't pair poorly enough with the Secondary Hide: Newmarket Tan, which is pretty damn orange. You can't see it, but the interior of the roof is Blue. For the veneer, I went with Tamo Ash, 'cause yuck. Finally, throw on some black wheels, and voila, my tacky Bentley. I must say, this is most definitely tackier than the real Bentley Flying Spur I once tested that looked like South Beach threw up inside. So much white and teal. Oh, and that ash wood. A Bentley rep told me they ordered it by mistake.  Now, Bentley isn't the only high-dollar outfit that lets you indulge in such tacky fantasies. Most other British brands do, including Mini, and the Germans offer plenty of color choices as well, usually through some special custom program like Audi Exclusive. Porsche makes it especially easy, though, which you can see in my other craptacular creation below.

2020 Mazda6 Signature Driveway Test | A luxury car interior with a non-luxury price

The 2020 Mazda6 Signature is pure luxury on the inside. If one were to remove the Mazda badges and replace them with Audi’s four rings, or LexusÂ’ stylized L, customers may not even bat an eye. Alas, that is the point of MazdaÂ’s range-topping Signature trim. Mazda fancies itself a “premium” car brand at this point, and the Mazda6Â’s cabin does an excellent job of selling that theme. A luxury interior starts with excellent and original design, and then itÂ’s finished with quality materials. Anybody can throw leather, suede and wood around, but if the design itself isnÂ’t moving, the fancy materials look tacked on. Mazda has managed to ace both the design and material quality sections of its test with the Mazda6 Signature. ThereÂ’s beauty in simplicity, and the Mazda6Â’s interior exemplifies that. A wide, sweeping dashboard dominates the view from the driverÂ’s seat. An endless swath of soft-touch UltraSuede is front and center, splitting the climate controls from the vents and infotainment screen above it. Mazda says itÂ’s “adorned with a subtle gold tint,” and itÂ’s made in a similar fashion as ornate kimonos. I found myself staring at the stitching running the full length of the dashboard. ItÂ’s topped by a silver strip that extends from one side of the cabin to the other into the side air vents. Interestingly, the side air vents extend beyond the rest of the dash into the door, so they look like silver metal wings sticking out with the doors open. Above the silver strip is something Mazda calls “Sen Wood.” It looks and feels like real wood, because it is — Mazda says Sen wood is used in taiko drums and Japanese furniture.   And then thereÂ’s the lovely continued presence of physical buttons for vital controls. All of the climate control options are integrated into a classy strip just below the suede in the center of the dash. The buttons themselves are high quality, easy to find and satisfying to use in their action. Same goes for the climate control temperature knobs. They turn with precision and give a clear indication of each degree of change. The ribbed faux metal (it's extremely convincing as real metal) surround on the dials makes it feel like youÂ’re changing the climate control on a car that costs twice as much as this Mazda does. Even some luxury cars donÂ’t offer the same level of tactility and satisfaction in their controls.

Land Rover will downsize with a pair of hybridized turbodiesel sixes

Europe's automotive industry has ground to a halt, but the strict emissions regulations that went into effect in early 2020 are still looming on the horizon. Land Rover is preparing to launch a pair of hybridized turbodiesel six-cylinder engines in a bid to comply with the regulations and avoid paying huge fines, according to a recent report. British magazine Autocar learned Land Rover has applied the mild hybrid technology already offered on the Evoque and the Discovery Sport, its two smallest models, to a 3.0-liter straight-six to obtain 300 horsepower. The company will also release a more powerful version of the six rated at about 350 horses. The former will be available on HSE, HSE Dynamic and Autobiography Dynamic variants of the Range Rover Sport, while the latter will be added to upmarket models like the HST. The full-size Range Rover (pictured) will get them, too. The sixes represent a two-pronged approach to replacing the 4.4-liter turbodiesel V8 available in Europe, among other markets. It delivers 335 horsepower and 546 pound-feet of torque, and it sends the Range Rover from zero to 60 mph in 6.5 seconds while giving it a 7,700-pound towing capacity. These figures are hard to argue against, but it's an older engine that's increasing the company's fleet-wide average emissions output, so it has to go. The mild hybrid system won't power either Range Rover on electricity alone, but it will make them cleaner and more efficient; losing a pair of cylinders will help in both areas, too. Although Land Rover hasn't confirmed plans to ax the V8 or launch a hybridized six, suppliers have started publishing information about the powertrain, so its launch is believed to be around the corner. Time will tell whether it will appear on the current-generation models or their replacements, which are undergoing shakedown testing globally and due out in the coming months. Sister company Jaguar will use the mild hybrid technology, too. The six-cylinder will find its way into the XF and the F-Pace, which are both expected to receive comprehensive updates before the end of 2020. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Talking Land Rover Defender, Ford Bronco and GMC Jimmy | Autoblog Podcast #586

Listen to Lamborghini's 830-horsepower track special scream its heart out

Lamborghini's next V12-powered hypercar is around the corner, and there's a good chance you'll hear it coming before you see it. The company released a preview video that confirms its 12-cylinder sounds better than ever. The 17-second clip shows the as-yet-unnamed model lapping a race track as part of its shakedown testing program. We can clearly hear the naturally aspirated, 6.5-liter V12 whirring away as it approaches its redline. It's an evolution of the engine found in the mighty Aventador S, among other cars, but it's tuned to deliver 830 horsepower. As to the transmission it's paired with, your guess is as good as ours, but we wouldn't expect the manual gearbox to make a glorious comeback. Lamborghini's in-house design center, Centro Stile, and its triumphant racing division, Squadra Corse, joined forces to create the model. Developed exclusively for track use, it's decked out with numerous vents, wings, and scoops. The video suggests the widespread use of composite materials like carbon fiber keeps weight in check; we notably spot it on the massive rear diffuser and on the equally large spoiler. Odds are it's all over the interior, too. The company has pointed out the front sub-frame is manufactured from aluminum, and that an innovative self-locking-type differential makes the car more drivable as it approaches its limits. Center-locking wheels wrapped by sticky Pirelli tires are part of the package, too. The video does a formidable job of hiding the car's overall lines. It looks like the driver enters the cabin via a scissor door, which suggests the model is Aventador-sized (or, like rumors claim, Aventador-based). Alternatively, it might be a preview of the Aventador's replacement, which is due out in the early 2020s with hybrid power. What's certain is that it wears a low-slung design; it's no minivan, though Lamborghini has made one before. Lamborghini will release additional information in the coming months, and the car's full unveiling is scheduled to take place this summer. It's a limited-edition model, and while there's no word yet on how many examples will be built, it's reasonable to assume they'll all be spoken for by the time we see it. Lamborghini Performance

McLaren F1 GTR Longtail No. 1 is road-ready and listed for sale

The chassis number on this 1996 McLaren F1 GTR Longtail is 19R, but in the order of production, this car is No. 1. It's the first longtail version of the GTR version of what many consider the greatest car ever made. Despite its track-intended build, it's road-legal, and it's currently up for sale in the United Kingdom.  The special nature of 19R goes beyond the fact of its birth order. This car was reportedly used as a development prototype for the entire run of GTR Longtails and participated in numerous Japanese races, including the Suzuka 1000km. According to the listing, it's also only one of two GTR Longtails in private ownership (Nick Mason owns the other), so this is likely one of few occasions in a lifetime when one will be available for purchase. 19R has another first under its belt, too. It was the first GTR Longtail to be converted to a road-legal specification. Gordon Murray, the designer of the F1, worked with Lanzante to turn the racecar version of the road car back into a road car. The unique F1 comes with a Gordon Murray Design book that documents the conversion, as well as the history of the car. All of the parts that were changed were also kept and come as part of a large spare parts package. Although some might not see the value of the color scheme, McLaren painted it this way to draw attention to the differences between the GTR and the GTR Longtail. The vibrant markings exaggerate the changes and earned this car the nickname "Squiggles," according to Tom Hartley Jr.  If the paint scheme looks familiar, it might be because this car has been seen flexing its BMW Motorsport-sourced V12 at the Goodwood hillclimb (seen below). Via Road & Track, the 19R is listed without a price by Tom Hartley Jr. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

FCA eliminates just under 2,000 supplemental contract workers due to coronavirus constraints

Car companies have jumped in quickly to help combat coronavirus. They’re even beginning to manufacture some of the badly needed medical supplies, like ventilators and masks. However, with stay-at-home orders sweeping across the nation and folks practicing social distancing, automotive sales and manufacturing have quickly dried up in North America. That leads us to todayÂ’s news coming out of FCA. A company spokesperson told us that approximately 2,000 supplemental workers (a subcategory of the companyÂ’s many contract workers) are being laid off. HereÂ’s the official statement from FCA: “In light of the challenges created by the COVID 19 situation, and the various ‘stay at homeÂ’ orders from multiple states, a number of development projects within FCA have been temporarily put on hold. "As a result of this, subcontract companies who were providing external support to a number of these projects have been asked to temporarily suspend their activities as we reprioritize certain initiatives and projects. We will continue to monitor the situation with the intent to return to normal activity as soon as the situation allows.” FCA made it clear in our communications with the company that it is not terminating all contract workers, nor is it terminating any employees of the company itself. The rationale here is that certain development work is on pause, so those who were contracted to be a part of that work are now out. We're told that those workers are in white-collar functions, not manufacturing jobs. We asked FCA if it had plans to reinstate all of the affected workers once the coronavirus crisis has passed, but received no commitment either way. “At this point weÂ’re going to continue to monitor the situation,” a company spokesperson told us. Questions still remain when it comes to the stimulus package moving through Congress right now as it pertains to the automotive industry. FCA says itÂ’s currently studying the bill, but hasnÂ’t offered up a comment on the situation yet. We havenÂ’t heard of any similar cuts happening at Ford or GM yet, but now that FCA has made a move, weÂ’ll be on the lookout for more. Hirings/Firings/Layoffs Chrysler Fiat coronavirus

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

GM, Ford and FCA expected to extend coronavirus shutdown into April

U.S. automakers General Motors, Ford and Fiat Chrysler are expected to extend their current shutdown in North America into the month of April as the fight to slow the spread of the coronavirus continues. At this point, the exact dates that Detroit's Big Three automakers will restart vehicle production remains up in the air. Ford said in a statement that it does not plan to restart production until at least April 6 but warned it could be further delayed into April. United Auto Workers President Rory Gamble sent a letter to union members saying that FCA had "no plans to reopen on March 30." GM has yet to confirm its plans — its last statement said the decision when to reopen "will be reevaluated week-to-week after" March 30 — but unnamed sources told Reuters that it will also comply with Michigan Governor Gretchen Whitmer's order barring non-essential businesses from operating until April 13. Gamble's letter said the union is "waiting to hear from GM and are demanding that they put our membersÂ’ safety first and adhere to government and health officialsÂ’ recommendations to stay-at-home." A spokeswoman for Whitmer was unable to clarify on Tuesday whether auto production is considered essential or not. Michigan has declared vehicle sales by auto dealers to be impermissible under the order, but dealerships and other facilities can make repairs.  The UAW also said two Fiat Chrysler union members — one in Indiana and one in Michigan — have died after contracting the coronavirus. A group representing major U.S. and foreign automakers warned in a letter to U.S. lawmakers with other industry groups on Monday that, "Auto industry analysts are expecting sales to be down by as much as 40 percent in March compared to 2019." The letter said 95% of North American auto plants are currently closed. Reuters contributed to this report. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Government/Legal Hirings/Firings/Layoffs Plants/Manufacturing Chrysler Fiat Ford GM coronavirus

255-hp Toyota GR86 and other big news leaks in dealer presentation

Last month, Motor1 said it received information on Toyota and Lexus product plans for the next few years from an inside source who attended a dealer presentation. To protect the source, Motor1 didn't publish any slides or proof from that presentation. A snippet of what happened behind closed doors has found its way online, Allcarnews posting one of the slides yesterday, as well as its own recap of the Japanese automaker's plans that mirrors the Motor1 report. If all of this is true, not only is there a ton of product in the works, but Toyota and Lexus lineups will get more interesting while answering the requests of several enthusiast groups. We'll start with the 86, then go by model year after that. The next-gen coupe developed with Subaru should sit on Toyota's TNGA platform and get a rebrand to wear the GR86 name, for Toyota's Gazoo Racing division. The real hallelulah happens under the hood, where a turbocharged four-cylinder is expected to produce 255 hp, a 50-hp jump over the present model. Look for an upgraded interior, too. The debut is slated for summer 2021, possibly July.    This year: The fall season should introduce a new crossover and a new Sienna with hybrid powertrains only. The current minivan has been on sale since 2010, getting a minor refresh in front in 2018. The crossover will be a five-seat midsizer that brings back the Venza name, this model already rumored here and abroad. It, too, will only get hybrid powertrains. Both planned as 2021-model-year products, it's possible their motivations will be based on the 2.5-liter four-cylinder in both the RAV4 and Highlander hybrids. And a refreshed Camry might come later this year as a 2021MY sedan.  2021: Next year will be a busy one. ... On the Toyota side, and as TFL has reported, the all-new Tundra that's first to sit on the TNGA-F truck platform will show in December 2021 as a 2022MY pickup. Rumor has the top model powered by a 3.5-liter twin-turbo V6 hybrid with around 455 hp and 500 pound-feet of torque, perhaps distinguished by the i-Force Max name that Toyota recently applied to trademark. A few months before that, Toyota will roll out a Corolla-based crossover maybe called the Corolla Cross, and potentially built in the U.S. at the Alabama facility being constructed with Mazda. And remember, a Toyota exec teased a small hot hatch for this market as well, "an answer" to the GR Yaris sold in Europe, which Car and Driver figures will be based on the Corolla.

Ram 1500 Rebel TRX reveals hood scoop-mounted marker lights

Now that the Ram 1500 Rebel TRX is testing with production bodywork, the company has been doing a thorough job of covering up the off-road super truck. But fortunately lights still show through the thick coverings, and we're finally able to see the truck's wide vehicle-denoting marker lights. As you can plainly see, they're mounted to the inside of the hood scoop. This differs from the original Ram TRX concept that had its lights mounted on the roof like a traditional heavy duty pickup truck. It also differs from the Ford F-150 Raptor's grille-mounted marker lights. Both the Raptor and the TRX have these lights not just for style, but because they're wide enough to require the amber marker lights with three in the middle and one on either side of the truck. We can't quite spot the outside marker lights for the Ram. They could be integrated into the headlights, since it seems like the turn signal is particularly wide on this truck compared with regular models. The position of these lights also matches a recent report, lending some more credibility to other claims in it. We expect the Ram 1500 Rebel TRX to be revealed by the end of the year, perhaps as soon as the Detroit Auto Show, which is still scheduled for June. We know it will have a supercharged V8, since we've heard it ourselves, and reports say it will make at least 707 horsepower like the Charger and Challenger Hellcat. It has thoroughly modified suspension for high-speed off-roading, just like the Raptor. And of course it will have four-wheel drive.  

McLaren Elva gets another retro paint scheme from McLaren Special Operations

You may have noticed that McLaren's official brand color is a bright shade of orange. That dates back to Bruce McLaren's M6A Can-Am race car of 1967, the first to feature the all-orange paint scheme and the car that helped him win his first Can-Am championship that year. So what better way to honor a wild open-top race car than by painting the wild open-top McLaren Elva supercar in the same color? The McLaren Elva M6A Theme is the second race car-themed Elva to come from McLaren Special Operations (MSO). The group offers customization services to McLaren customers, particularly unique paint and carbon fiber finishes. The special was revealed on Twitter, and it is quite faithful to the 1967 car. It's finished in a unique orange that looks a little less bold with more of a pearl finish than the glowing solid orange of the race car. It's paired with big simple number circles featuring the number "4" like one of the race cars. On the sides, a metallic stripe is added to mimic the chrome divider between the top and bottom sections of the Can-Am car. It also gets the same "McLaren Cars" logo and Bruce McLaren's signature down the side. As cool as this is from a historical standpoint, the orange really shows off how the body blends right into the interior, something McLaren did to evoke the feeling of being outside and exposed to the world, rather than hidden inside the car's cabin. The dark launch color was far less effective at conveying that feeling. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. On track in Bruce’s Can-Am winner As previously mentioned, MSO did another race car-themed Elva, a black and white car inspired by an older 1964 McLaren M1A race car. Clearly there will be one of each, but McLaren hasn't put any limits on the designs, so it's possible there may be multiple examples in the car's 399-unit run. We also wouldn't be surprised if McLaren rolls out some other motorsports-inspired liveries in the future, as it has many famous racecars to pull from. The reddish-orange and white Honda-powered Marlboro F1 cars of the late 1980s and the black and silver Mercedes-powered F1 cars of the early 2000s both seem like strong choices. Or if McLaren doesn't do it themselves, maybe a rich reader could commission one painted as such. Though we wouldn't want to tell that person how to spend their $1.69 million (or more) on their car. Related Video: