Blog

2021 Chevy Tahoe, GMC Yukon fuel economy and towing capacities go official

Most of the puzzle pieces have fallen into place with GM’s new full-size SUVs, but today we have fuel economy and towing to add to the picture. Numbers for the standard 5.3-liter V8 and upgrade 6.2-liter V8 are out, but GM has held back on the 3.0-liter turbodiesel inline-six for the time being. Those numbers are most likely not ready yet. Minor improvements and decreases are seen throughout the Tahoe/Suburban and Yukon/Yukon XL lineup. Because there are so many variants, weÂ’re going to just lay them out below for you. 5.3-liter V8 2021 Tahoe/Yukon 2WD: 16/20/18 2021 Tahoe/Yukon 4WD: 16/20/18 2021 Suburban/Yukon XL 2WD: 16/20/18 2021 Suburban/Yukon XL 4WD: 15/19/17 6.2-liter V8 2021 Tahoe/Yukon 2WD: 15/20/17 2021 Tahoe/Yukon 4WD: 14/19/16 2021 Suburban/Yukon XL 2WD: 15/20/17 2021 Suburban/Yukon XL 4WD: 14/19/16 As you can see, there isnÂ’t a whole lot of difference between two-wheel drive and four-wheel drive options. You can eke out an extra mpg here and there, but itÂ’s a penalty weÂ’d be happy to live with to have four-wheel traction. The biggest loser in all of this is highway mpg. Chevy has made the trucks bigger and added weight with the independent rear suspension, causing a decrease in fuel economy. For example, a 2020 Tahoe with the 6.2-liter V8 and four-wheel drive is rated at 14/22/17. The 2021 truck drops 3 mpg on the highway and 1 mpg in the combined rating. There are improvements to be found, though. A 2020 Suburban with the 5.3-liter V8 and four-wheel drive is rated 14/21/16. Fuel economy in the city goes up 1 mpg, but you lose 2 mpg on the highway and 1 mpg in the combined rating. ThereÂ’s a bit of give and take here, but at least a slight increase in city mpg has accompanied the greater loss in highway fuel economy. 2021-chevy-tahoe-chicago-01 View 12 Photos As for towing, the Tahoe/Yukon with the 5.3-liter V8 and two-wheel drive has a new 7,900-pound capacity, and the four-wheel drive model is rated at 7,700 pounds. Respectively, those are the best figures youÂ’ll get with the standard towing capacity. Opt for the maximum towing package, and the Tahoe/Yukon capacities go up to 8,400 pounds (two-wheel drive) and 8,200 pounds (four-wheel drive). The numbers all take slight cuts when you go for the 6.2-liter V8. Both the Suburban and Yukon XL offer similar or identical towing figures as their shorter counterparts do.

Off-roading in a 2020 Jaguar I-Pace HSE

The hiker’s eye roll was so extreme that it was nearly audible. “Nice trail car,” she said in mocking tones that left little doubt she felt otherwise. She was among a group that was walking single file downhill as I was creeping my all-electric 2020 Jaguar I-Pace around a tight uphill bend, proceeding slowly because a sheer cliff blocked my view through the apex on this one-lane section of the Maple Springs truck trail. Such a cautious approach is the norm up here because hikers share this fire road with mountain bikers, adventure motorcyclists and day-tripping off-roaders. But I was being extra careful because I was keenly aware that my electric all-wheel-drive machine emitted none of the engine noise an ascending geared-down truck would make. WhatÂ’s more, my test car was shod with the optional low-profile 255/40R22 high performance summer tires that put the lips of the pricey 22-inch “diamond turned” rims uncomfortably close to the rocks. Meeting a motorized vehicle wasn't the surprising bit – it was that theyÂ’d expected to see a 4Runner, Tacoma or Jeep Wrangler come nosing around the bend, not some high-falutin Jaguar styled by renowned designer Ian Callum. IÂ’d been up this U.S. Forest Service fire road dozens of times, most recently just two weeks ago in my own JK Jeep Wrangler. ItÂ’s easy if you have clearance and reasonable all-terrain tires, so I was prepared to take advantage of the numerous wide spots if the iPace protested. Besides, this was not really a test of the off-road prowess of the I-Pace itself. I was more interested in getting a feel for what electrified off-roading might be like. I started grinning less than 100 yards after the trailÂ’s narrow paved approach turned into dirt and began snaking steeply upward through dust and embedded rocks. In my own Jeep, which has a six-speed manual transmission and 4:10-to-1 axle gearing, I usually choose low-range at this point because the transmission gear spacing in high range is too wide and the engine bogs all too easily at these slow and constantly varying speeds. By comparison, the JaguarÂ’s power delivery was pure magic. For starters, there was no 4x4 mode to engage, no low range to select. The dual-motor all-wheel drive system is always on, and it constantly adjusts its torque split to suit conditions. Throttle pedal response is thoroughly accurate, and I never once had to goose the pedal because electric motors deliver their peak torque at zero rpm.

Navigating the road time forgot in a Rolls-Royce Cullinan

The Rolls-Royce Cullinan glides evenly over the rutted single-lane dirt road, barely unsettling its passengers. Nobody is speaking in the lush cabin, not even my normally chatty 7-year-old.  All eyes are turned to the Delaware River gliding by, a dozen feet away, through a skim of skeletal hardwood trees. There’s no sign of humanity or habitation. ItÂ’s almost a scene in a movie. The Last of the Mohicans, perhaps.  Today we are exploring the Old Mine Road, and it is making us think of ghosts. Its 104 miles of asphalt and dirt make up one of the oldest continuously-used roads in America, stretching from New YorkÂ’s Catskills to the Pennsylvania Delaware Water Gap. The Lenape are thought to have first threaded a path here in the 1300s.  It is also a pathway wending its way through the NortheastÂ’s violent history, from bloody skirmishes between the original Native American inhabitants and European settlers to the Americans and Brits in the Revolutionary War. Little wonder that out here in the quiet, that history — and those ghosts — feel close. Amazingly, the 40-mile section in New Jersey that follows the eastern banks of the Delaware looks much like it did a hundred years ago. There are million-dollar views, but as part of the Delaware recreation area, no development is allowed.  Instead of the gated McMansions youÂ’d expect less than 1.5 hours from New York City, we are greeted by silent forest and twin lanes of bumpy or shattered asphalt. ThereÂ’s a section of dirt and gravel, narrowing to a single lane. Easy to imagine hundreds of years of horses and mules stamping down the thin path.  It is early spring and like everyone else, we have cabin fever. My wife, son and mother-in-law are sheltering-in-place at our country house in the Poconos. America is locked into a struggle with an invisible enemy. It seems a good time to get some historical perspective. If our ancestors lived and endured under harsh conditions, so can we.  There is nothing inherently unsafe or socially unacceptable about taking a short road trip on a virtually unused road, so we pack a lunch of cold pizza and snacks, and pile into the leather-bound, environmentally-controlled cocoon of the Rolls. We make our way to Kingston, N.Y., where the road begins. IÂ’m finally going to drive the entirety of the Old Mine Road.   Our Barney-purple Cullinan is a rolling sanctuary, a movable fortress of social isolation.

Driving the Toyota Supra and Subaru WRX STI S209 | Autoblog Podcast #625

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by West Coast Editor James Riswick and News Editor Joel Stocksdale. First, they talk about the cars they've been driving, including the Toyota Supra, Subaru WRX STI S209, and the Mercedes-Benz CLA and GLB. They also discuss rumors of the Kia Stinger getting killed off. Greg Migliore takes a break to chat with Autoblog contributor Dan Edmunds to talk about the cars he's been testing. Finally, our editors take to the mailbag to help a listener pick a sport truck in the "Spend My Money" segment. Autoblog Podcast #625 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving: Toyota Supra Subaru WRX STI S209 Mercedes-Benz CLA-Class Mercedes-Benz GLB-Class Kia Stinger death rumor Chat with Dan Edmunds Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Podcasts Kia Mercedes-Benz Subaru Toyota Used Car Buying Truck Coupe Crossover SUV Luxury Performance Sedan

Jaguar's next-generation XJ will be electric, but it won't bend design rules

Jaguar's next-generation XJ won't roar like a lion or purr like a kitten. It will ditch gasoline-powered six- and eight-cylinder engines in favor of electric power, the British company confirmed, but that's not an excuse to completely change its proportions. It will still be recognizable as a member of the decades-old XJ family. "We're there to make the best-looking cars we possibly can, so the new XJ, it does have a [hood] on it. It's a very, very elegant shape; it's probably a little bit more traditional than the I-Pace," explained Julian Thomson, the man who replaced Ian Callum as Jaguar's head of design, in an interview with magazine Auto Express. The aforementioned I-Pace is a segment-bending crossover with short overhangs and an unusually spacious cabin; it takes full advantage of the possibilities offered by compact electric technology, and it looks like nothing else on the road. Thomson confirmed his team won't take the XJ in this direction, and spy shots (pictured) taken far north of the Arctic Circle illustrate his point while keeping finer details under a swirly black and white wrap. Although it's built on a massive lithium-ion battery pack, the next-generation XJ seemingly wears the typical long front, short back proportions that have characterized the model for generations. The most dramatic change is the presence of a hatch instead of a trunk lid. It was added to give the sedan a more fastback-like appearance than its predecessor; it has nothing to do with what's under the sheet metal. The XJ has been the segment's underdog for many years so keeping the classic three-box silhouette would have been marketing suicide. "It's going to be a very, very luxurious, very, very calm, tranquil piece of transportation. But, it's not overtly flashy, it's not overtly expensive," summed up Thomson. His comments suggest it will be a better match for the Mercedes-Benz EQS, which is being designed around comfort the firm is known for globally, than for the Porsche Taycan, which stays true to the badge on its nose by putting a greater focus on performance. The electric version of the seventh-generation BMW 7 Series due out in the early 2020s will split the difference. Jaguar is putting the final touches on the next-generation XJ, and it plans to introduce the model before the end of 2020. It's too early to tell if the big, silent cat will make its debut at one of the few auto shows left on the calendar, at a standalone event, or online.

Facelifted Genesis G70 spied in new photos

The updated Genesis G70 was spotted testing on the road in Europe, and spy photos shared with Autoblog depict a prototype wearing significant camouflage that could be hiding some big updates to Hyundai's luxurious newcomer.  Mid-cycle refreshes are often nip-and-tuck affairs, but the extent of the coverings on this prototype suggest that Genesis has more in store for its compact luxury sedan than a fresh set of LEDs and some delicately re-drawn bumpers.  According to our spies, there may even be revisions to the materials used in the unibody and exterior panels to reduce weight and improve both efficiency and performance. The sedan's manual transmission is expected to live on for at least another model year, but whether it will carry over to the face-lifted model remains to be seen.  While both the head- and taillights on this prototype do appear to be new, we expect the G70's list of updates to be far more comprehensive, including updated powertrains and chassis updates. One of Hyundai's latest generation of turbocharged four-cylinders making at least 290 horsepower and 310 pound-feet of torque is even rumored to be making an appearance. Currently, the four-cylinder engine in the G70 makes 252 hp and 260 lb-ft. Based on Hyundai's estimates for the Sonata N-Line, the G70 could be getting a boost of nearly 40 horsepower and 50 pound-feet of torque. Those numbers might be conservative, as the G70's rear-wheel drive platform will take more readily to extra power than the Sonata's front-wheel drive setup. Increased power from the turbo four would make the 365-horsepower, twin-turbo 3.3L V6 less of an upgrade, but we suspect Hyundai will massage the 6's output to keep the natural order of things intact.  Related Video:            

2021 Acura TLX outed in European patent images

Acura brought its Type S concept to last year's Monterey Car Week as a glimmer of what we could expect from the all-new TLX coming next year. Since then, we've had better glimpses of the sedan in unintended leaks, the first in Acura's own infotainment system, now in patent images from the European Union Intellectual Property Office. Discovered by French forum Worldscoop, the details in the grayscale drawings match the color image from the infotainment software, giving us another look at hotly anticipated sedan that will infuse much-needed excitement into Acura's lineup. Even though the images show rear bumper cutouts plenty large enough to house quad pipes, the patent is presumed to show the standard TLX trim, not the Type S trim we know is coming. Even so, we can see plenty of Type S concept influence even with the less aggressive bodywork, such as the narrower upper grille and more pronounced lower grille, the garnish on the lower intakes, the side mirror design, and flared rear fenders. The rear end in the patent shows the same taillamps and decklid shutline, aero vents in the bumper, and the reshaped license plate holder moved from the trunk to the bumper.  The bodywork will sit on a new platform, and the bulk of betting money has Honda's 2.0-liter four-cylinder turbo four-cylinder from the RDX as the base engine. That mill making 272 horsepower and 280 pound-feet of torque in the RDX, compared to the 2.4-liter four-cylinder in the current TLX that makes 206 hp and 182 lb-ft. The Type S is expected to inaugurate a brand new 3.5-liter twin-turbo V6 developed specifically for Acura with more than 350 hp, a meaty bump beyond the 290 hp and 267 lb-ft in the present range-topping 3.5-liter V6. The TLX comes in two standard flavors now, so the question is whether Acura will give the 2021 model another engine or output option between standard and the Type S. The MDX Sport Hybrid crossover fits a 3.0-liter V6 powertrain producing a combined 321 hp and 289 lb-ft. On the 2021 TLX, a 10-speed automatic will manage shifting duties, sending power either to the front wheels or to all four through Acura's Super Handling All-Wheel Drive.  The automaker had planned on debuting the car at the New York Auto Show, and the rescheduled debut will come online and is likely not far away. If Acura doesn't show the Type S at the same time, an unveiling of that should come by early next year. Related Video:    

Nissan recovery to focus on U.S., Japan, China markets

Nissan will pull back from Europe and elsewhere to focus on the United States, China and Japan under a plan that represents a new strategic direction for the embattled carmaker, people with direct knowledge of the plan told Reuters. The "operational performance plan" is due to be announced on May 28 and goes beyond fixing problems from ousted leader Carlos Ghosn's aggressive expansion drive, the people said. The company's struggles predate the current global economic shutdown. Nissan's 2019 sales slumped severely.  Nissan was already planning to implement what was described as a "do or die" plan in January, before the global coronavirus pandemic froze automotive production and sales worldwide.  Pursuit of market share, particularly in the United States, led to steep discounting and a cheapened brand. Under the new, three-year plan — reported here for the first time — Nissan aims to restore dealer ties and refresh lineups to regain pricing power and profitability, the people told Reuters. "This is not just a cost-cutting plan. We're rationalizing operations, reprioritizing and refocusing our business to plant seeds for the future," one of the people said. The plan also aims to cut competition and expand cooperation with alliance partners, the people said. Nissan will follow Mitsubishi in plug-in electric hybrid vehicle technology, with the smaller peer taking the lead in Asian markets outside China and Japan. France's Renault will likely focus on electrical vehicle technologies and Europe. Nissan and Mitsubishi declined to comment. Renault did not immediately respond to a request for comment. The plan, led mainly by Chief Operating Officer Ashwani Gupta rather than Nissan's low-key chief executive, Makoto Uchida, is aimed at freeing resources to invest in products and technology for the United States, China and Japan, the people said. "The net effect is even though we reduce our R&D spend this year versus last year and make other savings, we pump those freed-up resources back into core markets and core products," said one of the people, who declined to be identified as they were not authorized to speak with media on the matter. The plan is likely to take up to two weeks to be finalized, with sales and earnings targets complicated by the anticipated long-term impact on auto sales of government measures worldwide taken to stop the coronavirus outbreak, the people said.

Junkyard Gem: 2006 Mitsubishi Raider

When I'm scouring the rows of a big, fast-inventory-turnover vehicle boneyard for fascinating examples of automotive history, I keep strange examples of badge engineering at the top of my shopping list. Subarus with Saab emblems, Isuzus with Acura emblems, Hyundais with Mitsubishi emblems, Austins with Nash emblems, Mazdas with Mercury emblems, all the vehicles that sprang into existence because Carmaker A wanted to fill a vacant slot in the showrooms and Carmaker B proved willing to offer a vehicle that fit that slot. While I have yet to unearth a discarded Suzuki Equator pickup, I've found this truck with a far more convoluted model-name history: a 2006 Mitsubishi Raider in Phoenix. Chrysler sold rebadged Mitsubishis over here for decades, beginning with the Dodge Colt in the 1971 model year. Trucks joined the mix in the middle 1970s, with the Plymouth Arrow and then the Dodge D-50/Ram 50 pickups. The Dodge-ized Mitsubishi pickups soon faced competition from their Mitsubishi-badged twins, in the form of the Mighty Max, and then Chrysler began selling first-generation Mitsubishi Monteros with Dodge badging. That truck became the Dodge Raider, available with "Imported for Dodge" emblems in North America for the 1987 through 1989 model years. Raider owners loved their tough little SUVs every bit as much as Montero owners loved theirs, and so the Raider name continued — decades later — to have positive connotations in the world of Dodge and Mitsubishi truck owners. So, when the American outpost of the Mitsubishi Empire needed a pickup to offer in their showrooms (the Mighty Max having been axed in 1996), they turned to their friends at Chrysler and the Dodge Dakota pickup. With some new bodywork and tough-looking Raider badges, the Dodge/Mitsubishi Raider circle had been closed. Raider sales began in 2005 for the 2006 model year. Sales numbers proved disappointing, and 2009 was the last year for the Raider. This one got crashed hard, then picked over for mechanical goodies by Dakota owners. You won't find many pickups this new with manual transmissions, but this one had one. The engine is long gone, but would have been an American Motors-developed 4.7-liter V8 or 3.7-liter V6. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. With Dodge going murderously macho with their ads last decade, Mitsubishi had no choice but to follow that formula with the Raider. Related Video:

The Suzuki Jimny pickup truck might be the best Jimny

Suzuki showed off a Jimny pickup truck concept at the 2019 Tokyo Auto Salon, and it garnered more positive hype for the already beloved new-generation 4x4. But more than a year later, there are no signs that a production version is coming in the immediate future, if at all. So, members of the aftermarket are building their own. Shropshire Quads out of the United Kingdom takes regular Jimny SUVs and converts them into pickups by lifting the vehicle and adding a metal tub to the rear. Shropshire Quads has been building Jimny pickups for years. The company started doing the conversions on used models but has since grown to add the new Jimny to the operation, as well. Here's how it all started:  We are a small family run business based near Cleobury Mortimer in South Shropshire. We are main agents for Arctic Cat and Kymco ATVs. We felt that there was a niche gap in the agriculture/land management sector for a small lightweight pickup with more creature comforts and reliability than your usual UTVs. We went in search, and following lots of research, we decided that the Suzuki Jimny would be the ideal base vehicle. We now convert quality, low mileage Suzuki Jimny's to pickups using the best quality, factory designed and manufactured components. We hope you agree that we offer the best Suzuki Jimny Pickup on the market. The blue example seen here is the shop's first conversion on a new Jimny. According to Farmer's Weekly, Shropshire Quads orders the factory-manufactured kit that was designed for Suzuki from Austria and is the sole distributor and installer in the United Kingdom. Somebody in New Zealand is running a similar operation. As seen in the photos, the kit can only be installed once the rear portion of the Jimny is chopped off. The kit includes a metal rear bulkhead panel that is equipped with a heated rear screen. Plastic side moldings smooth out the conversion into the bed, which is made of stainless steel and aluminum. The rear tailgate is removable, and Shropshire Quads says the kit uses strong high-quality latches. A recessed fuel filler is mounted with cast aluminum and found on the driver's side. As this is a conversion intended for labor, it can be ordered with a one-inch lift or a three-inch lift. For added utility, the Jimny can be fitted with flotation tires or smaller all-terrain tires. The Jimny was already cool, and having one on the farm sounds like a fun way to do chores.

Creative minds build lightweight Lambos and Bugattis with cardboard and pedals

As manufacturers continue their quests to reduce the weight of their vehicles, they switch out heavy steel for lighter materials such as aluminum, carbon fiber, titanium, and sometimes even magnesium. But they've been ignoring a cheap alternative that is widely available: cardboard. Leave it to two visionaries from Vietnam to crack the code and build supercars and superbikes out of the versatile paper product. Vietnamese YouTube channel NHET TV, via CarScoops, might only have a year under its belt, but in that short amount of time, it has amassed more than 350,000 subscribers. What initially started out as a random collection of harmless pranks, trolls, and makeshift time-killers has blossomed into an entertaining channel of ultra-low-budget car and motorcycle builds.  The first video posted is a paper plane competition, but the second video shows the first appearance of a vehicle, a Ducati Panigale made out of cardboard and a bicycle. This isn't like Paper Mario with a two-dimensional silhouette, it's a close-enough three-dimensional replica. That project was admittedly pretty rough, but the work has only improved as the channel has matured.  Throughout the past year, NHET TV has stuck with high-performance transportation for inspiration. They've built projects that mimic a Lamborghini Sian, a Lamborghini Aventador SVJ, a Ferrari LaFerrari FXX K, a Bugatti Chiron, a BMW S 1000 RR, and a Yamaha YZF-R6, among others. Some of the builds, such as the Bugatti, go beyond the typical cardboard-body-on-bicycle-frame. As seen in the video below, the NHET TV built a tubular frame for the car using spare bike parts that they welded together. The Bug even has a custom steering column and steering wheel, though the high-quality model continues to use bike chains and pedals for power. The SVJ might be the most advanced vehicle, as it has a real engine for power and has custom reverse gearing. These guys are creating fun out of the limited resources they do have, and that's what right now is all about. Enjoy the videos below and watch more on the full NHET TV channel.

2021 Cadillac Escalade Onyx package adds monochrome logos

The 2016 Cadillac Escala concept showed off a number of features never seen on a Cadillac, one of them being a redesigned, entirely silver, untextured logo. Cadillac had been putting all-silver versions of its crest on the fenders of some of its vehicles, but those bore patterned silver inserts where the yellow, black, red, and blue would have appeared on the standard mark. The Escala logo, on top of being squatter and wider, displayed silver blanks where the colors went. Cadillac Society has found out a similar treatment is on the way for the 2021 Escalade as part of a new Onyx package. This time, instead of being brightwork, a Cadillac spokesperson told CS the logos are "more grey versus [the] silver/chrome [on the fenders]." And for the first time on a Cadillac on the showroom floor, these monochrome badges will appear on the grille and tailgate. Buyers can add a Sport Edition package to the current Escalade, dressing almost all the brightwork grille in gloss black and bolting on a set of 22-inch Midnight Silver wheels. The Cadillac logos, however, stay in color, and the Escalade lettering stays in chrome. That changes with the Onyx package, those gray monochrome crests joined by Escalade lettering in gloss black, plus 22-inch, 12-spoke wheels in high gloss black, and a similar blackout of all the other brightwork as found on the Sport Edition package. The Sport Edition is only available on three of the eight possible colors; a limited color selection could hold true for the Onyx package as well. Branding could get even more interesting when the crest's animated illumination shows up on the Lyriq electric crossover.  The 2021 Escalade will move to the new forked trim strategy, Premium Luxury on one side, Sport on the other, the Onyx package only available on the Sport side. For shoppers who want to go the other way, we're sure the new Escalade will offer something equivalent to the current Radiant Package that makes any Escalade even more impossible to miss on a sunny day. Related Video:    

Impala SS vs. Marauder: Recalling Detroit’s muscle sedans 

Impala SS vs. Marauder — it was comparo that only really happened in theory. ChevyÂ’s muscle sedan ran from 1994-96, while MercuryÂ’s answer arrived in 2003 and only lasted until 2004. TheyÂ’re linked inextricably, as there were few options for powerful American sedans during that milquetoast period for enthusiasts. The debate was reignited recently among Autoblog editors when a pristine 1996 Chevy Impala SS with just 2,173 miles on the odometer hit the market on Bring a Trailer. Most of the staff favored the Impala for its sinister looks and said that it lived up to its billing as a legit muscle car. Nearly two-thirds of you agree. We ran an unscientific Twitter poll that generated 851 votes, 63.9 percent of which backed the Impala. Muscle sedans, take your pick: — Greg Migliore (@GregMigliore) April 14, 2020 Then and now enthusiasts felt the Impala was a more complete execution with guts. The Marauder, despite coming along later, felt more hacked together, according to prevailing sentiments. Why? On purpose and on paper theyÂ’re similar. The ImpalaÂ’s 5.7-liter LT1 V8 making 260 horsepower and 330 pound-feet of torque was impressive for a two-ton sedan in the mid-Â’90s. The Marauder was actually more powerful — its 4.6-liter V8 was rated at 302 hp and 318 lb-ft. The ImpalaÂ’s engine was also used in the C4 Corvette. The MarauderÂ’s mill was shared with the Mustang Mach 1. You can see why they resonated so deeply with Boomers longing for a bygone era and also captured the attention of coming-of-age Gen Xers. Car and DriverÂ’s staff gave the Marauder a lukewarm review back in ‘03, citing its solid handling and features, yet knocking the sedan for being slow off the line. In a Hemmings article appropriately called “Autopsy” from 2004, the ImpalaÂ’s stronger low-end torque and smooth shifting transmission earned praise, separating it from the more sluggish Mercury. All of this was captured in the carsÂ’ acceleration times, highlighting metrically the differences in their character. The Impala hit 60 miles per hour in 6.5 seconds, while the Marauder was a half-second slower, according to C/D testing. Other sites have them closer together, which reinforces the premise it really was the little things that separated these muscle cars. Both made the most of their genetics, riding on ancient platforms (FordÂ’s Panther and General MotorsÂ’ B-body) that preceded these cars by decades. Both had iconic names.

2019 Subaru STI S209 is a burbling blue beast

The 2019 Subaru STI S209 is a celebration of everything that made the STI and Impreza WRX STI line so popular with car enthusiasts. It has extreme body work, a heavily boosted flat-four that slams you in your seat, performance gizmos such as a center differential controller and an intercooler sprayer, as well as impressive handling and grip, in part due to its all-wheel drive. And of course, it has that signature boxer engine rumble, which has been accentuated with this model's exhaust system. We wanted to share that sound so captured some footage of the car on start-up, gentle acceleration, full throttle acceleration, and some free-revving, in that order. It's a mellow sound, one that occasionally sounds like a motorcycle, but a bit smoother. And while it's noticeable at lower speeds, it's tuned such that it's extremely quiet at cruising speeds, and doesn't become massively louder at full throttle. In fact, you'll notice that the road noise and the wind rushing out of the exhaust ends up overwhelming the rumble at some points. It's something that both Senior Producer Chris McGraw and I noticed in our drives of the super Subaru. If it seems like it's too quiet, we're sure the aftermarket can solve the volume issue for you.

Bentley seasons the Continental GT and Bentayga with carbon fiber pack

Because Bentley is Bentley, and nothing it offers is "regular," it has a different name for select features available on its vehicles. Rather than calling these options or packages, they are called "specifications." One of the specifications available on the Continental GT, Continental GT Convertible and the Bentayga is called the Styling Specification, and it brings gloss carbon fiber elements to these cars' exteriors.  Both the Bentayga and the Continental GT have numerous Specifications available for extra purchase. The Bentayga is available with a Blackline Specification, All Terrain Specification, City Specification, Event Specification, Smoker's Specification, Sunshine Specification and the Touring Specification. In addition to the Smoker's, City and Touring Specs, the Continental GT also offers the Diamond Knurling Specification, Mood Lighting Specification and Front Seat Comfort Specification. The Styling Specification, though developed to align with the vehicles' aerodynamics, are intended to create a visual impact, as the name suggests. This package uses high-gloss carbon fiber to shape a front bumper splitter, side skirts with metallic Bentley badges, a rear diffuser and the trunk spoiler. The Bentayga is slightly different from the Continental GT package, as it also features a bi-plane tailgate spoiler and rear screen strakes. Further options include carbon fiber front air blades, wing vents and mirror caps. The carbon fiber in the Styling Specification uses a 2x2 twill pattern with matching directional weave across every part. It is also hand-crafted in a way that the carbon fiber is mirrored at the center of the vehicle to create a balanced look that will please perfectionist minds. Bentley says the Bentley badges on the side skirts were created through 3D electroforming, which could generally be described as a more precise version of 3D printing. The badges were specifically designed to "minimize the risk of air bubbles forming in the lacquer overcoat" while introducing a textured look. The Styling Specification can be ordered for a new car or retrofitted on an old car. It will also soon be available on the Bentley Mulsanne. Related Video:

McLaren Speedtail reveals its hybrid powertrain secrets, and of course it's impressive

Until now, McLaren has been keeping secrets about its three-seat Speedtail hypercar. We’ve known itÂ’s packing a hybrid powertrain that produces a combined 1,055 horsepower and 848 pound-feet of torque, but thatÂ’s about it. Today, McLaren is spilling the beans, and what impressive beans they are. The combustion engine is a 4.0-liter twin-turbo V8, rated for 747 horsepower and 590 pound-feet of torque on its own. Its output is nearly identical to that of the 765LT (rated for 755 horsepower and 590 pound-feet). And yes, the two are both equipped with McLarenÂ’t M840T engines. However, the SpeedtailÂ’s hybrid powertrain is named M840TQ, since it features an electric motor to help it along. And help the Speedtail along it does. McLaren says the single electric motor generates 308 horsepower on its own, which is an astounding figure for its application. The tech on display here is derived from Formula E, and McLaren is claiming itÂ’s the “highest performing installation — including cooling and integration — of any electric motor currently in use in a production road car.”  McLaren is also bragging about its new battery unit. ItÂ’s a 1.647-kilowatt-hour (mighty precise there, McLaren) cylindrical-shaped unit thatÂ’s “arranged in a unique way.” What way? McLaren doesnÂ’t say. However, itÂ’s an extremely compact unit, and McLaren claims itÂ’s able to provide the best power-to-weight ratio of any high-voltage battery available today. It says the power density of the battery is four times that of the McLaren P1, the companyÂ’s only other hybrid vehicle.  As for the cooling system, itÂ’s also state-of-the-art. McLaren says the cells are “thermally controlled by a dielectrical cooling system and permanently immersed in a lightweight, electrically insulative oil which quickly transfers heat away from the cells.” This cooling technology is also being claimed as a first in a production road car. The benefit? ItÂ’s highly efficient, and will “allow the cells to run harder and for longer.” All of this is great news for future hybrid McLaren supercars, which are coming soon. Related video:

2020 Mazda MX-5 Miata Suspension Deep Dive

Full disclosure: I’m a longtime Miata fan. And by longtime I mean since mid-1989, the year I obtained, through a series of fortunate connections, one of the three original Chicago auto show display cars. But this was no blatant attempt to butter up a journalist – I barely knew how to spell the word. At the time I worked for the Department of Defense and was racing SCCA showroom stock on the side. It was destined to be a racecar. I was assured itÂ’d be quick, but doubts surfaced when I arrived at MazdaÂ’s dealer training center to pick it up. “Oh, itÂ’s that cute Elan-looking thing,” I probably said. But my mind was utterly changed when I eyeballed its double-wishbone suspension and other cleverly engineered features hiding beneath its skin. In subsequent years of racing – and eventually restoring – that car, I spent uncountable hours being impressed by it. I can safely say that the new ND Miata (2016 - present) is the best yet. ItÂ’s lighter than it has been in 20 years, and thatÂ’s some trick considering the relentless march of safety requirements and expected convenience features. This car is actually 1.3 inches shorter from nose to tail than my NA Miata, but itÂ’s also 2.4 inches wider and rolls on a wheelbase that is 1.7 inches longer. But it is the suspension that has always made the Miata great. This look under the skin of a 2020 Mazda MX-5 shows why the ND is the best Miata in that arena, too. The fact that this is an RF model doesnÂ’t much matter one way or the other.   As it was the first time I laid eyes on one, things got off to a promising start as soon as I pulled a wheel off. ItÂ’s clear that this is no mere strut suspension, as we can see a coil-over shock and glimpses of aluminum.   The apparent stars of the show are the A-shaped upper wishbone (green arrow) and the L-shaped lower wishbone (white). Miatas have used this layout from Day One, but aluminum didnÂ’t enter the picture until the NC generation.   For 2020, Bilstein monotube shocks (green) come on the Club and Grand Touring models with a manual transmission. This setup was part of the GT-S option package in 2019. The standard shocks are also monotubes, but theyÂ’re not Bilsteins and theyÂ’re tuned a bit softer. The upper control arm (yellow) is mounted low down such that its ball joint (white) resides within the barrel of the front wheel.

Ford applies to trademark term 'Lincoln eGlide'

There's an epilogue to Ford's recent announcement that it's giving up on a battery-electric Lincoln co-developed with Rivian. The MachEClub forum discovered that just a week ago, Ford applied with the U.S. Patent and Trademark Office to trademark the term "Lincoln eGlide." The goods and services category details use for "Motor vehicles, namely, passenger automobiles, sport utility vehicles, electric vehicles and structural parts and fittings; electric vehicles, namely, passenger automobiles, sport utility vehicles, and structural parts and fittings." Living in an age where a small "e" is shorthand for "electric," and Ford having specified electric vehicles in the patent, the go-to guess is that this is for an electric vehicle. The inclusion of non-electric motor vehicles injects a little fuzziness. Tesla's trademark on the Model S specifies "electric automobiles" only, whereas Rivian's trademark for the R1T seeks coverage for "land vehicles" and just about every part found in or on a land vehicle.   Since Ford must have known about the end of the Rivian effort when it applied for the trademark, we suppose Lincoln has got some kind of eGlide coming no matter what. Lincoln refers to the theme of its latest cabin designs, as in the Aviator and Corsair, "Quiet Flight," and the road-scanning adaptive suspension on the Lincoln Aviator is called "Air Glide," neither term being trademarked. This leads our suspicions to eGlide becoming a vehicle component that could potentially serve a model with any powertrain, not necessarily battery-electric only, and eGlide won't be the name of the Lincoln EV that Ford says is still on the way. Another clue is that Ford included the word "Lincoln" in the term. Trademarked vehicle names such as Aviator and Corsair don't include the make, but services for vehicles do, such as the trademarks for Lincoln Connect and Lincoln Co-Pilot 360. We'll admit that a little bit of hope informs this line of thinking as well. Ford having done Lincoln the fabulous service of giving Lincolns terrific names, we'd be aghast if the Corsair and Navigator had to share showroom space with an eGlide. We've no choice but to wait for a retail product to provide answers. In the meantime, if we could just get to the bottom of this "Fastor Charge" trademark, and what's this bit about "Vandemonium?"   Related Video:        

Alfa Romeo Giulia GTA heritage liveries revealed, and here's what it will cost

Alfa Romeo created the Giulia GTA as a tribute to one of its most successful race cars, and the connection between the two models won't stop at the nameplate. Buyers will have the chance to order their hot-rodded sedan in one of several heritage-laced paint combinations worn decades ago by race-winning models. Designers immersed themselves in Alfa Romeo's archives department to analyze the most emblematic color combinations worn by the original GTA and its derivatives during the 1960s and the 1970s. White with green stripes was common, as was red with a yellow front fascia. The firm often competed with red cars, so painting the front end yellow, white, or another contrasting color allowed race officials and fans to quickly identify the driver. Stylists working in Alfa Romeo's Centro Stile then re-interpreted their favorite liveries to suit the Giulia GTA introduced in March 2020. The Italian firm said availability will be limited, but it didn't reveal how many cars it will assign a classic color combination to. Those who miss out will have to choose between green, white, and red. Alfa Romeo will cap GTA production at 500 examples. Pricing on the European market starts at ˆ143,000, while the lighter GTAm model (which is included in the 500-car production run) carries a base price of ˆ147,000. These figures represent $155,000 and $160,000, respectively, though pricing for the American market hasn't been released. Every customer will receive a Bell helmet, a car cover that matches the paint, and a stint at the Alfa Romeo Driving Academy. GTAm buyers will also get a racing suit, gloves, and shoes made by Alpinestars. Dyed-in-the-wool fans will have the opportunity to take delivery of their Giulia at the Autodelta workshop in Balocco, Italy. That's where many of Alfa Romeo's greatest race cars were developed and built. Those for whom Alfa's sportiest sedan in decades will remain a dream have the car's configurator as a consolation prize. Related Video:     Featured Gallery Alfa Romeo Giulia GTA heritage liveries View 10 Photos Alfa Romeo Performance Sedan

2021 GMC Canyon Denali shows its new grille

GMC showed us its new 2021 Canyon AT4 pickup at the beginning of the year. We got a few details on the "more upmarket" top-tier Denali trim coming next year, but we've been missing good photos of the article until now. The more upmarket part rings true when it comes to the front fascia of the the 2021 Canyon Denali, achieved at the cost of a busyness compared to the 2020 model. That's because designers bent the set-square lines on the current trim into angles and flared edges from top to bottom, adding more prominent textures along the way. The comparison shot in the gallery above reveals all,  the "exclusive heroic grille design" — really, that's GM's name for it — the heart of "a more distinctive and sophisticated design that has become synonymous with Denali," according to Holt Ware, the brand's head of exterior design. Inside, the luxury trim offers a new and exclusive open pore ash wood for accents, a Cocoa/Dark interior treatment, heated and cooled front seats, aluminum trim, and embroidered headrests. There's wholesale change coming for the entire Canyon lineup, but we need to wait for GM to officially announce the 2021 pickup to codify everything properly. The trim walk has changed, from Canyon, SLE, All Terrain, SLT, and Denali to Elevation Standard, Elevation, AT4, and Denali, and we're still wondering what this might to do the $650 Elevation Edition cosmetic package. The bargain basement models have also gone away, putting the new MSRP floor $4,200 above the 2020 model to go along with other price increases dotted throughout the lineup. GM Authority says Canyon production won't be delayed by the coronavirus lockdown, so production should begin n Wentzville, Missouri, in a few months. Related Video:    

Fiat Chrysler's dealers and mechanics to reopen on Monday in Italy

MILAN — Fiat Chrysler said on Thursday its Italian network of approved dealers and mechanic workshops would reopen on May 4, when the country is set to start lifting a national lockdown put in place to limit the spread of the coronavirus. A package of health and safety measures for workers and clients will be put in place across the entire network to comply with the rules set by Rome to prepare for a staged restart of economic activities after weeks of national lockdown triggered by the virus outbreak. A vast majority of FCA's dealers and workshops in Italy are run by private operators, while the automaker directly operates some large ones in big cities. FCA this week resumed van production at its Atessa plant in central Italy and some operations in other Italian plants, including preparatory works at its Melfi facility for the final development of Jeep's new hybrid cars, and at Turin's Mirafiori plant for its new electric 500 small car. Related Video:

Infiniti serves up ‘Carigami’ models to ease coronavirus quarantine boredom

To the list of things car enthusiasts can do to combat coronavirus quarantine boredom, or keep their restless kids diverted, Inifiniti is serving up what it’s calling “Carigami.” ItÂ’s exactly what it sounds like: origami for cars, more or less. Three models are offered — the Q50 sedan, QX80 SUV and the now-discontinued FX crossover — all in 1:27 scale. All you need is a printer and paper, a craft knife and some glue. ItÂ’s not the first time Nissan has turned to the Japanese art form, having commissioned a full-scale origami version of the Juke on its fifth anniversary in 2015. Outside the Nissan realm, we also recently saw a downloadable origami version of the Tesla Cybertruck. You can download all three Infiniti templates and instructions at Infiniti.com. We especially dig the use of a record turntable as a way to replicate the life-size design turntable automakers display new models on at auto shows.

GMC Hummer EV pickup reveal postponed

We’re pretty excited about the all-electric Hummer pickup coming from the GMC brand. GM is too, enough to spend Super Bowl money on an ad teasing it. Today, we received an update from GM about the Hummer EV, with good news and bad news. The bad news: GM has announced that it is postponing the May 20 reveal for the Hummer. With the coronavirus throwing the proverbial wrench into a number of vehicle operations, including reveals, we canÂ’t say weÂ’re surprised at all. The good news, GM assures us, is that development continues “undeterred.” GM understandably hasnÂ’t provided a new debut date for the GMC Hummer EV, but it did provide us with the new short teaser video above. WeÂ’ve seen other details in previous teasers, as well. We were lucky enough to see the Hummer EV in person last month just before the pandemic began causing the world to grind to a halt. At GMÂ’s EV Day at its Warren, Mich., campus, the Hummer pickupÂ’s exterior was on full display. ItÂ’s a big, off-road-ready pickup complete with giant all-terrain rubber and tow hooks. It features removable roof panels for access to the open sky, which appears to be depicted in the teaser above. It features sail panels behind the C-pillars, similar to those on the Chevy Avalanche and Honda Ridgeline. Its bed was concealed with a tonneau cover, but it sported GMCÂ’s MultiPro tailgate that we first saw on the Sierra Denali. Interior photos showed a spacious interior with blocky shapes, squared hourglass vents that mirror the look of the taillights and a lunar theme that incorporates the topography of the Sea of Tranquility into things like the floor mats and speaker covers. It also has a large infotainment screen as well as a digital instrument panel. The Hummer pickup will be offered with a number of electric powertrain options, the most powerful of which will provide 1,000 horsepower and a 0-60 mph time of less than three seconds. Like the rest of the next generation of GM EVs, it will use the automakerÂ’s new Ultium modular battery and powertrain technology. While we donÂ’t have further details about a potential reveal date, we also know a Hummer electric SUV based on the pickup will follow at some point. It, too was on display at GMÂ’s EV Day. It looks exactly like the Hummer pickup from the rear doors forward, but with a shorter wheelbase and enclosed cargo area in the rear. It also sported a liftgate-mounted spare.

McLaren recalls Senna and several other models over potential fire risk

McLaren is recalling multiple models due to a potential fire risk. The models in question include the 2016-2020 720S, 2019 Senna, 2020 GT and 2017-2019 570GT. In total, that amounts to 2,763 cars. The Senna being part of this recall caught our eye, since so few of those will ever be sold. McLaren says that 157 Sennas will be subject to recall. As for the issue itself, the fire risk stems from an NVH foam pad that is placed underneath the fuel tank. McLaren says there is a possibility that this pad collects and retains corrosive moisture from the environment while driving. Over time, this could corrode the surface of the fuel tank where the pad is in contact with it. Those “micro-porations” in the fuel tank could trigger the release of gas vapor or fuel liquid. McLaren says this wouldnÂ’t immediately cause a fire, because the fuel would be exiting into a “cool part of the vehicle” (not the exhaust or powertrain). However, fuel could ultimately leak onto the ground under the vehicle, increasing the risk of a fire under the car. McLaren says it first learned of the issue from a Latvian customer who claimed to smell fuel coming from his 570GT. The customerÂ’s car was a former press car, “subjected to high mileage, wear and tear and greater range of road conditions than a typical vehicle of the same type and age.” Yeah, we can attest to that. After another similar complaint from a UK customer, McLaren opened an investigation, and this recall is the result. To fix the 720S, Senna and 570GT, dealers will be removing the NVH pad from the car and inspecting all the gas tanks for corrosion. If McLaren deems it necessary, the fuel tank will be replaced. As of now, that NVH pad is just being removed from the car with no replacement part. McLaren hasnÂ’t specified a remedy for the McLaren GT yet, suggesting that something else is going on there. McLaren also states that there is no defect in the design or the materials used in the fuel tank. The foam pad is the potential issue here. Related Video:

2020 Acura TLX PMC Edition Driveway Test | Shine bright like a ... ruby

Valencia Red Pearl. That’s the story with the 2020 Acura TLX PMC Edition. We got to see this limited edition TLX sedan at the New York Auto Show last year, but now itÂ’s in my driveway. The show lights donÂ’t do this paint justice. The setting sun reflecting off the deep and vibrant red ... now that's how this car is meant to be gazed upon. Like I mentioned in the video walkaround above, the TLX PMC Edition is hand-assembled at the Performance Manufacturing Center in Ohio. The body-in-white is trundled across town to the NSX supercar factory where those technicians do the rest to make it road-worthy. All 360 of them are being wrapped in their own special car covers and delivered to dealers on an enclosed truck to make sure it arrives without a single exterior flaw. About that paint Valencia Red Pearl is a $6,000 paint option on the Acura NSX. On the TLX PMC, itÂ’s $0. The paint process itself is time consuming and intensive. Acura says the vibrancy and high-color saturation is thanks to nano pigment technology.  “Engineered using mica, metal flake and super-high transparency nano pigments, the paint is applied using PMC's advanced robotic paint system in multiple base coats to enhance color intensity. This is followed by two clear coats to increase the paint's luster,” AcuraÂ’s description reads. 2020 Acura TLX PMC Edition View 43 Photos The five-day process is well worth it. IÂ’ve tried my best to illustrate it through photos and video, but itÂ’s still not representative enough of this red paint. It has a depth and shimmer to it, as if the body panels were a swimming pool, awaiting a cannonball dive into the deep end. This car being an exclusive, special edition vehicle hasnÂ’t destroyed the value proposition either. In actuality, the TLX PMC is the one to buy if you want a fully-loaded TLX. Acura doesnÂ’t allow you to option the A-Spec and Advance packages together with the standard TLX, but both of those are included with the PMC Edition. If you were able to combine all those packages, the final price would ring up to $50,650. The final price on our test car is $50,945, including the $1,995 destination charge on the sticker. Basically, youÂ’re getting every option in the book at around list price, plus all of the special PMC Edition extras for next to nothing. Why yes, of course weÂ’ll have the PMC Edition. It drives just like the TLX A-Spec — check out our full review of that car here.

Luc Donckerwolke steps down as head of Hyundai Group design

Automotive News got hold of "an internal note" declaring that Hyundai Group design chief Luc Donckerwolke is stepping down today for "personal reasons." After ex-Volkswagen Group pen Peter Schreyer took over Kia design in 2006 and began the South Korean automaker's renaissance, Donckerwolke became the next VW Group design emigre to head east in 2015. He began his tenure in charge of Hyundai and Genesis, then took over as group design head when Schreyer stepped back from day-to-day operations in November 2018. Donckerwolke pushed for emotional products and brands that didn't look like different-sized versions of one another, dividing the trio of company makes into sexy and sporty Hyundai, young and cool Kia, and haute couture Genesis. Two of the three brands are on their way. Kia's got some top products but is still tweaking its formula.  The Belgian's design resume stretches back to his first job at Peugeot in 1990, where he stayed for two years before moving to Volkswagen. That's where things get good, a 23-year run including work on the first-generation Skoda Octavia and Fabia, the Audi A2, A4 Avant, and R8 Le Mans race car, the Lamborghini Diablo VT, Gallardo and Murcielago, and the Bentley Flying Spur among many others. Credits at Hyundai include the Kona and Palisade, and at Genesis, the G80 and G90 sedans and the GV80 crossover. Considering Donckerwolke's background, it's no surprise to hear he opined for a Genesis supercar within a year of arrival at Hyundai, and had ideas about what he wanted to do. He said at the 2016 New York Auto Show, "I won't reveal the secret now because it's still my baby! Obviously, yes, this is part of the interest of designing a brand, being able to create [supercars]. It's not just something which we'll do, let's say a rational traditional project, but there will be some highlights." It's too bad we'll miss that. Hyundai Group bosses won't name a successor yet, leaving SangYup Lee as head of design at Hyundai and Genesis and Karim Habib, the ex-BMW and ex-Infiniti designer hired last year, in charge of Kia design. Donckerwolke issued a statement that read in part, "It's been an honor and privilege to contribute to the shaping of the future of Hyundai, Kia and Genesis.

2019 Subaru STI S209 Drivers' Notes | An old-school sports sedan unites two of our editors

The 2019 Subaru STI S209 is peak Subaru for America. It’s the most powerful and most expensive vehicle with the Subaru badge on it, and there will only ever be 209 of them sold. ItÂ’s put together in STIÂ’s small shop in Kiryu, Japan, where workers build approximately 2-3 cars per day.  SubaruÂ’s long-used 2.5-liter EJ25 turbocharged flat-four is back for another round, but itÂ’s been modified to make more power than a regular WRX STI. The redesigned intake, larger HKS turbocharger and better-flowing exhaust system ramp output up to 341 horsepower and 330 pound-feet of torque, gains of 31 and 40 respectively over a regular STI. It can hit 60 mph in 4.9 seconds and tops out at 162 mph. A huge number of changes were made to the suspension, steering, aero and brakes to make the S209 drive better and produce quicker lap times on track. You can read a full deep dive into all of the intricate changes in our First Drive story here. A couple of Autoblog staffers, News Editor Joel Stocksdale and Senior Producer Chris McGraw, happened to spend some time in S209s in their respective portions of the country. Check out their thoughts in the discussion below. Chris McGraw: So how was the 2019 Subaru STI S209? Joel Stocksdale: When the S209 showed up, I was excited to drive such a special car, but I was also unsure I would like it. It's massively expensive, and I already had mixed feelings about STIs to begin with. They have an ornery, old-school nature that has frustrated me before, especially the slow-spooling engines. But man, I'm in love with this thing.  CM: That's interesting to hear. For those who don't know, you and I rarely see eye to eye when it comes to cars, so I was eager to hear your thoughts on the S209. I drove this back in early November, and it had been awhile since I had driven an STI in general. The frustrating, ornery, old school nature is something I love about the STI, and I adored driving it from the start, especially in the mountains. Though I wish it had been on winter tires for the cold weather at the time.  JS: That's totally understandable. The summer tires on this thing are not happy with snow and cold. But thankfully it's been dry and warm enough here that they're still good. And that's one of the things I love about this car. Between the tires and the all-wheel drive, it has astounding grip. Turn the wheel, put the hammer down, and let it claw you around corners.

Subaru makes Indiana proud by sponsoring 'Parks and Rec' coronavirus reunion

On April 23, NBC Universal announced the return of modern comedy classic "Parks and Recreation" for a special one-time reunion to help raise money for the Feeding America COVID-19 Response Fund. Joining the good-spirited event, Subaru announced this week it would help sponsor the special by matching donations up to $150,000. The all-new show will air Thursday, April 30, at 8:30 p.m. ET, and donations can be made through FeedingAmerica.org. For 30 minutes, fans of Leslie Knope and her trusty crew of buddies will have the chance to temporarily escape the current stressful times caused by the coronavirus and COVID-19 pandemic. The show was filmed from the actors' houses and will adopt a theme set by current times. "Leslie Knope is determined to stay connected to her friends in a time of social distancing," an NBC press release says. All of the original characters will return for the special, including Amy Poehler as Knope, Nick Offerman as Ron Swanson, Aziz Ansari as Tom Haverford, Rashida Jones as Ann Perkins, Aubrey Plaza as April Ludgate, Chris Pratt as Andy Dwyer, Adam Scott as Ben Wyatt, Rob Lowe as Chris Traeger, Retta as Donna Meagle, and Jim O'Heir as Terry Garry Jerry Gergich.  “We were looking for ways to help and felt that bringing these characters back for a night could raise some money,” executive producer Michael Schur said in the release. “I sent a hopeful email to the cast, and they all got back to me within 45 minutes. Our old ‘Parks and RecÂ’ team has put together one more 30-minute slice of (quarantined) Pawnee life, and we hope everyone enjoys it. And donates!” For those who are unaware, "Parks and Recreation" is set in the fictional small-town of Pawnee, Indiana. So, it makes sense that Subaru, a company with a manufacturing plant in the heart of Indiana, would pitch in. Subaru and State Farm will join NBCUniversal, as well as the writers, producers, and cast of "Parks and Rec," in matching donations collected until May 21. Subaru will match donations up to $150,000, as will State Farm, for a potential total of up to $500,000 in matched donations. The donation comes after Subaru previously committed to providing Feeding America with 50 million meals for COVID-19 relief. By the organization's standards, $1 can provide up to 10 meals. Donate at FeedingAmerica.org and watch the show April 30. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Lincoln cancels plan to build electric vehicle on Rivian's platform

Just three months ago, Lincoln announced a project to build a vehicle atop Rivian’s skateboard platform. Today, itÂ’s canceling those plans. Automotive News originally reported the news, and a Lincoln spokesperson confirmed it to us. Lincoln reportedly informed dealers of its decision to cancel the electric project earlier today, citing the “current environment.” Language like that these days in the automotive industry refers to the coronavirus pandemic and flailing vehicle sales. Originally, Lincoln announced that this model would launch in 2022. It was to be built using the same platform underpinning the Rivian R1S and R1T. The partnership with Rivian was so close that this Lincoln was going to be built at RivianÂ’s Normal, IL assembly plant. Production of the plant itself was halted recently in the face of the coronavirus, which is bad news for any products meant to be built there in the near future. Lincoln never announced that this vehicle was going to be an SUV, but that was the likely result of it using RivianÂ’s platform designed for rugged and large utility vehicles. However, Lincoln says it still has plans to build an electric vehicle. The companyÂ’s statement follows: “Given the current environment, Lincoln and Rivian have decided not to pursue the development of a fully electric vehicle based on RivianÂ’s skateboard platform. Our strategic commitment to Lincoln, Rivian and electrification remains unchanged and LincolnÂ’s future plans will include an all-electric vehicle consistent with its Quiet Flight DNA.” Lincoln hasnÂ’t specified any product details or timing for when this mystery electric vehicle will launch. It could be based off the Mustang Mach-E platform, or it could be a larger vehicle based off the future electric F-150 platform. The former could launch sooner, while the latter is likely a little ways out still. Lincoln doesnÂ’t want this news to be read as a loosening of ties between itself and Rivian either. “Our partnership with Rivian is strong,” LincolnÂ’s statement reads. “While the Lincoln electric vehicle did not turn out to be the right opportunity, we continue to work closely together with Rivian. Our strategic commitment remains unchanged and we will continue to work with Rivian on an alternative vehicle based on RivianÂ’s skateboard platform.” As of now, Lincoln hasnÂ’t revealed exactly what didnÂ’t line up to make the planned collaboration work.

Outrageous Thor24 semi truck to appear in the new season of 'Jay Leno's Garage'

Wednesday is Jay Leno's birthday, and CNBC used the occasion to announce the upcoming season of Jay Leno's Garage. In a new teaser video, Leno is seen with a stacked list of guests, some new, some repeats, as well as a wild gamut of vehicles, including the absolutely insane 24-cylinder, 3,424-horsepower Thor24.  The outrageous semi build, which sold at auction in Saudi Arabia earlier this year for a whopping $12 million (or $1 million per supercharger) will join the likes of the Tesla Cybertruck and a recliner on wheels on the upcoming season of Jay's series.  Thor24 View 24 Photos The formula for Jay Leno's Garage is simple, successful, and not changing anytime soon. He brings out a bunch of famous people, some of which are real enthusiasts, others who have more casual driving backgrounds, and they experience a vehicle together. In the short clip released by CNBC, Leno is accompanied by Elon Musk (again), Danny Trejo, Bill Burr, Tim Allen, Jon Hamm, Brad Garrett, Jeff Dunham, Kelly Clarkson, Matt LeBlanc, Blake Shelton, Norm MacDonald, Edd China, and Jon Lovitz.           View this post on Instagram                   Thank you for sharing your dream with us. Happy Birthday, Jay! Love always, your @cnbcprime Family. A post shared by Jay Leno's Garage (@jaylenosgarage) on Apr 28, 2020 at 8:27am PDT The people, however, are merely social lubricants to spotlight the real stars of the show, the cars. This season will include the Tesla Cybertruck, the record-breaking Bugatti Chiron Super Sport 300+, a 1965 Buick Riviera, a naked cat car, an Aston Martin DBS Superleggera, a Porsche Taycan, a modern Ford GT, a Chevrolet Corvette C8 hard-top convertible, amphicars, a snail car, a beetle car, a couch car, and the 24-cylinder, 12-supercharger, 3,424-horsepower Thor24 semi. Just to name a few. As usual, there will be racing, stunts, spinouts, smoke from both tires and engines, and lots of silly dad jokes. Season 5 of Jay Leno's Garage debuts on CNBC on May 20 at 10 p.m. ET. Related Video: Celebrities Green TV/Movies Aston Martin Bugatti Chevrolet Tesla Special and Limited Editions Jay Leno Jay Lenos Garage