Blog

Latest Lexus LC500 Inspiration Series coupe sports a carbon-fiber roof, rear spoiler

The Lexus LC500 has been treated to a spate of Inspiration Series limited-edition models, and the 2021 LC500 coupe Inspiration Series has just been announced. This fifth such effort sees the LC500 don a carbon-fiber rear spoiler, a carbon-fiber roof, a limited-slip rear differential, a performance rod with damper for the rear suspension, and assorted visuals. The 471-horsepower naturally aspirated V8 is unchanged. Unlike the already-announced 2021 LC500 Inspiration Series convertible, which features a sky-like palette consisting of a blue exterior and a white leather interior, the 2021 LC500 Inspiration Series coupe goes dark with an Osdiian (black) exterior including black 21-inch wheels. Inside, there's black Alcantara with brown accents. Equipment includes a head-up display, 915-watt Mark Levinson audio system, and a SmartAccess Card Key. As with previous Inspiration Series models, including last year's Nori Green Pearl example and this Flare Yellow job from 2019, production is limited to 100 units for the U.S. market. Pricing has not been announced, but you can expect this stealth Lexus to roll into dealerships later this winter. Related video:

Cadillac imagines the future of luxury transportation with a drone and a pod

Besides more screens and electric cars, GM and Cadillac made sure to pay tribute to the other darlings of the tech industry: autonomous cars and drones. Both concepts take familiar ideas but add a touch of Cadillac flavor. And don't expect either of them to show up in reality anytime soon. The most fanciful of the two is the Cadillac VTOL concept, which stands for vertical takeoff and landing. It's a fully autonomous drone meant for shuttling people, likely wealthy executives, from rooftop to rooftop in busy cities. It's a single-occupant aircraft with a 90-kWh battery pack and is fully autonomous. It has four sets of two rotors that propel the drone to a top speed of 56 mph. The exterior is unique in having the front and rear sets of rotors at different heights, whereas most seem to have the cabin hanging from the rotors. You can spot some Cadillac cues in the beveled, angled edges. The other concept is the Personal Autonomous Vehicle or PAV. It's a fairly generic-looking autonomous pod with a pastiche of Cadillac design cues such as slim lights and angular trimmings. Cadillac says it's meant to be a social space, hence the wraparound bench seats in the cabin. Cadillac doesn't seem to have forgotten personal comfort, though, as you can spot a single-person recliner. Comfort is key, and Cadillac says the PAV would have biometric sensors to read the passengers and adjust the climate control, humidity, lighting and scents to make the the environment as pleasant as possible. Passengers will have control of vehicle functions via voice and gestures. At the end of theses vehicles' reveals, Cadillac teased more far-flung concepts coming soon. One of them will be a two-seat vehicle and mentioned that it would be for "you and someone very special" for more "intimate" trips. Related Video:

GM may have teased a whole group of electric vehicles

During GM's big CES press conference, the automaker highlighted a number of its upcoming electric car-related projects from delivery vans to the upcoming flagship Cadillac Celestiq. In the middle of it all, a collection of mystery cars sat in the background behind speakers. They were in the dark, lit only with their running lights, and while it's possible they're just generic filler cars or concepts, we think they could be future products. Our best shot of the cars together is shown above, and we can pretty easily identify three of the vehicles. In the center is obviously the GMC Hummer EV. On either side of it are Cadillacs. To the left seems to be the Lyriq crossover, and to the right is the Celestiq sedan. Two of these cars have production dates, and the third has been confirmed for eventual production, just without timing. This is why we think the rest of the cars are upcoming models. The next most easily identified car is on the near right behind the Cadillac Celestiq. It very clearly has a Chevy bowtie illuminated in the running lights. And looking closely, it appears to be a pickup truck. It's difficult to make out anything more than that. The nose does look a bit more rounded and swept back than the brick-like designs of the Silverado truck line. That also squares with what seemed to be the upcoming truck that appeared in the background of yet another GM presentation. GM previously said this electric Chevy truck will be a full-size model with up to 400 miles of range. That leaves us with three more mysterious models. Over to the left behind the Cadillac Lyriq are what appear to be a pair of crossovers. The one on the far left looks low, curvy, and possibly with a fastback roof. The one on the right is taller, boxier, and probably more of a full-size people hauler. It's hard to say much more beyond that. They could be new electric Buicks, which would fit in nicely with that brand's crossover portfolio, and would likely be highly successful in China, where Buicks, crossovers and electric cars are all rather hot commodities. As for the mystery car on the far right, it's quite a puzzle. We can at least rule out Buick and Cadillac, and GMC since it's definitely a car, and a rather small one compared with the other cars on display. That leaves Chevy, and possibly the autonomous division Cruise. We're leaning toward it being a Chevy, since the first Cruise vehicle is going to be a boxy pod of sorts.

Driving JLR Classic's factory-restored Jaguar Reborn E-Type

COVENTRY, England – Moviegoers of a certain age will likely draw an association between the flag-emblazoned E-type “Shaguar” driven by Austin Powers and the carÂ’s image as an icon of Swinging-Sixties cool. For sure, the Brits cling to this era, recalling a time when everyone from The Beatles to the nationÂ’s car manufacturers were successfully exporting English swagger to the world. As the 60th anniversary of the E-typeÂ’s first appearance in 1961 approaches, attention is again focused on this golden age for British automotive engineering and JaguarÂ’s increasingly industrialized approach to leveraging its heritage. That takes the form of an impressive modern facility on the outskirts of the brandÂ’s hometown, where classic Land Rover, Range Rover and Jaguar vehicles are “Reborn” in nut-and-bolt factory restorations. This isnÂ’t a few old hands turning spanners in a dusty corner of the main factory — instead customers can go direct to Jaguar Land Rover Classic Works, order the Reborn vehicle of their dreams and sit patiently for the spectacular return on their considerable investment. In the case of the Reborn E-type driven here, that starts at around $400,000, though that figure can rise considerably if youÂ’re fussy about the vintage of the original car and want one based on a more sought-after early model. For the real fanboys Jaguar is even offering Drivsix matched pairs of restored E-type 60 Editions to celebrate the coupe and roadster that were famously driven direct from the factory to the Geneva unveiling just in time for Jaguar founder Sir William Lyons to reveal it to the world. That even Enzo Ferrari was moved to acknowledge its beauty adds to the romance of that moment, and explains why Jaguar is so keen to celebrate it. But can the Reborn E-type do justice to such myth and legend? And is factory original really preferable to the restomods built by independents like Eagle? Wheel time in a gorgeous Reborn 1965 4.2 Fixed-Head Coupe on an authentically grey and overcast English day is my chance to find out. The E-type may have earned EnzoÂ’s respect for its looks but, ever the wily engineer, he will likely have been paying closer scrutiny to what was under those slinky panels. Jaguar had demonstrated it could beat the worldÂ’s best in sports car racing with multiple Le Mans wins in the 1950s. As the new decade dawned, it looked to have ambitions to do the same in showrooms with a product that made MaranelloÂ’s finest seem like old tech.

Cadillac Celestiq previewed as a flagship luxury electric car

Last year, our Autoblog Green editor, John Beltz Snyder, got a sneak peik of GM's upcoming electric car roll out. No photos were given, but he described them in great detail. Now we finally get our own peek at one of those cars, the Cadillac Celestiq flagship sedan. Sadly, we don't get a particularly clear look, since Cadillac is only teasing the car at this point, but it's better than nothing, and better than most teasers. We get a top-down shot that reveals the car will share some key cues with the Lyriq crossover EV. Most obvious is the rear with the boomerang taillights and fastback roof, which is a glass unit separated into four pieces. Each piece can be individually adjusted for transparency, and it appears they can be illuminated as well. The front also appears similar to the Lyriq with a geometric grille covered in a transparent panel. The grille looks significantly larger, though. It also features illumination like the crossover. We also get a look at the interior, which prominently features a full-width screen for instruments and infotainment. There appears to be a screen in the center console/stack that can control functions including the roof panel illumination. According to Snyder, the interior also has extensive wood and metal trim intermingling with nifty ambient lighting. Cadillac didn't say much about the mechanical aspects except the basics. It will use GM's Ultium battery technology that will be shared with other products such as the aforementioned Lyriq and the GMC Hummer EV. It will also feature four-wheel steering as well as all-wheel-drive, undoubtedly courtesy of dual motors, one front and one rear. Cadillac previously confirmed that the Celestiq is headed for production. We also suspect that some of the fancy features such as the screens and multi-panel glass roof could make it to production. This is because it's meant to be a halo product showing off the ultimate in luxury and technology from the brand, and it could have a price tag larger than $200,000. We're expecting Cadillac to fully reveal the Celestiq in a few months, but it could be a while before the production version hits the road. The Lyriq isn't going on sale until late next year, and we would bet the Celestiq wouldn't come ahead of it. Related Video:

Fiat Chrysler teams with startup Archer to build an electric air taxi

Archer Aviation is one of many startups trying to build an electric vertical takeoff and landing (eVTOL) aircraft, among Volocopter, Hyundai, Lilium and many others. The startup just boosted its standing, however, as it has announced a partnership with Fiat Chrysler Automobiles (FCA). Archer plans to build a composite eVTOL aircraft capable of traveling 150 mph for distances up to 60 miles. FCA will provide access to its “low-cost supply chain, advanced composite material capabilities and engineering and design experience,” according to Archer. The aim is to unveil the electric aircraft design in 2021 and start manufacturing in 2023. Archer has only released a teaser image of the aircraft, showing a sleek six-prop, V-tail design. Presumably, the wings or individual engines rotate to allow for both VTOL and decent forward travel speeds. The design differs from others weÂ’ve seen like LiliumÂ’s aircraft, which has the propulsive fans hidden in the wings. ItÂ’s also nothing like the drone-type designs from Volocopter, Joby and Hyundai. It does look a bit like Larry PageÂ’s “Cora” air taxi, however. Archer said itÂ’s been “hyper-focused” on the customer part of the design, aiming to offer “increased safety while producing minimal noise” compared to helicopters. “Now, we are working with a seasoned, industry-leading automotive partner... to produce thousands of aircraft reliably and affordably every single year,” said co-founder and co-CEO Brett Adcock. All passenger aircraft must pass a rigorous FAA certification process thatÂ’s daunting even for experienced companies like Boeing, and itÂ’s still not clear how “thousands” of air taxis would fit into the current air traffic control system. On top of that, so far weÂ’ve seen zero eVTOL aircraft that look ready for human transport or mass production. Written by Steve Dent for Engadget. Green Plants/Manufacturing Chrysler Fiat air taxi

One of the world's largest muscle car museums is auctioning off its cars

Rick Treworgy's Muscle Car City is one of the biggest collections of high-performance American cars in the world. With over 200 cars of mostly GM makes, it's a mecca for fans of the golden age of Detroit iron. Unfortunately, the museum will be shutting its doors for good on Jan. 17 and auctioning off most of its assets with no reserve. The collection is, to put it bluntly, astounding. Advertised as a combined 65,000-plus horsepower, it occupies a 60,000-square-foot retail space in Punta Gorda, Fla., in a former Walmart store. It make sense when you learn that founder Rick Treworgy made his fortune in the commercial real estate business. As a hobby, he began to amass a truly jaw-dropping collection of muscle cars, filling out a collection that often has every year of a particular model represented, or a grouping of the rarest and highest-performance option packages of that year or model. Often, Treworgy bought placeholders while scouring the country for even rarer versions. It helps that Muscle Car City also houses a showroom where unwanted cars are sold, as well as its own speed shop that stocks plenty of parts. There's even a '50s-style diner called Stingray's Bar and Grill. According to a 2014 episode of Car Crazy, Treworgy has 80 Corvettes alone, more than the actual Corvette Museum. Among them are 20 models from 1967, one of Treworgy's favorites. The rest span the decades from 1954 (he once had a '53 but sold it) to a recently acquired 2020 C8, which, according to The Drive, has only 300 miles on the odometer. You like Impalas? There are models of every year from 1958 to 1969. El Caminos? He's got 'em from 1964 to 1972. Novas? Every year from 1963 to 1970 is represented. Most are the more desirable examples of each breed, with four-speed transmissions, the biggest blocks, and unicorn option packages like a factory 1965 Z16 SS396 Chevelle, one of 200 that were ordered off-menu at Chevy dealerships. And don't even get us started on the Camaros, which include not one, but two COPO 1969s. Treworgy even owns the only known surviving example of a 1936 Chevrolet Phaeton, of which only seven were built. On top of it all, many of these cars are concours quality and have won awards at prestigious car shows. While it's sad to see a collection like this broken up, Treworgy told The Drive that he'd been planning to retire next year anyway. However, the COVID-19 pandemic sped up those plans, greatly reducing the number of visitors to his museum.

Green-on-green Alfa Romeo 8C-based Disco Volante Spyder listed for sale

There is no unwritten rule that states an Alfa Romeo must be red, and there is no secret decree that claims an Italian car can't wear British Racing Green. Proving both of these points with aplomb is this rare 2019 Alfa Romeo 8C-based Disco Volante Spyder, which is finished in green with a green interior and listed for sale in Switzerland. Offered by exotic car dealer Niki Hasler, this Disco Volante Spyder is the fourth of seven examples built by Italian coachbuilder Touring Superleggera. When the model made its debut in 2016, we reported that each of the seven cars would be painted in a different color, and our consumer editor Jeremy Korzeniewski wrote that he hoped one would be painted green like an earlier coupe shown at a Geneva show. His wish has come true. British Racing Green works quite well on the retro-styled lines, which were penned as a modern interpretation of the original Disco Volante built in 1952. The person who ordered this Disco Volante also asked for a matching green interior upholstered in a combination of leather and Alcantara. Touring Superleggera added a plaque between the seats to remind occupants of the car's rarity, but most of the parts that the driver sees and interacts with come straight from the 8C Competizione. It's all Alfa under the hood, too. Touring made no major mechanical modifications to the Disco Volante, so it's powered by a Ferrari-derived, 8C-sourced 4.7-liter V8 engine that delivers 450 horsepower and 354 pound-feet of torque to the rear wheels via a six-speed automated-manual transmission. The 2019 example listed for sale in Switzerland has covered 16,000 kilometers, which represents approximately 10,000 miles, so it hasn't spent its life as a garage queen. It recently received new tires and new brakes, according to the dealer. Unmodified, it's equipped with a useful lift system for the front axle; we can't imagine the front splitter is cheap to replace if it loses a fight with a speed bump. As a bonus, this Disco Volante comes with a matching luggage set. Niki Hasler hasn't published pricing information, so we don't know how many organs you'll need to sell before you can add this Disco to your collection. It won't be a bargain, however. Seven units were built with Alfa's blessing, so it's rare enough to make even the standard 8C, which was limited to 1,000 units globally (split evenly between coupes and convertibles), look common.

1980 Aston Martin Bulldog concept will reattempt to break the 200-mph barrier

Aston Martin's 1980 Bulldog concept will receive a second chance to break the 200-mph barrier after it emerges from a complete, 18-month restoration. It was developed with all-out speed in mind — the British company had hoped the coupe would become the fastest car in the world, but it missed its target before getting shelved. Had things gone as planned, car-crazed kids in the 1980s would have grown up with a picture of the Bulldog on their bedroom wall. Aston Martin wanted to hoist itself up the exotic car pecking order by building the fastest car in the world, though it didn't envision more than a limited production run of 15 to 25 cars. Penned by William Towns, who also drew the Lagonda, the Bulldog looked like nothing else on the road (let alone in the Aston Range) due in part to its five center-mounted lights, and it broke with tradition by adopting a mid-mounted engine. Engineers floated a top speed of 237 mph, according to The Drive, but the Bulldog ran out of breath at 191 mph. Victor Gauntlett axed the project shortly after taking the top job at Aston Martin in 1981 because the numbers didn't add up; the firm wasn't in a position to chase speed records. Now, 40 years later, it's almost time to try again. Classic Motor Cars began the lengthy process of restoring the Bulldog on behalf of a private owner in 2020, and it enlisted the help of Aston Martin factory driver Darren Turner to see if it can break the 200-mph barrier once it's back in one piece. Richard Gauntlett, the son of the company's former boss, is overseeing the project. We don't know precisely when or where the speed run will take place, but Classic Motor Cars aims to have the Bulldog running by the end of 2021. In a statement, it said that the car is "well on the way to being restored." Restoring any exotic car from the early 1980s is a meticulous, expensive, and time-consuming process, and bringing a one-off concept car back to life increases the number of challenges exponentially. Classic Motor Cars can't order parts from Aston Martin, for example, and it's not able to study another example to find out how a specific panel is welded. It helps that the Bulldog hasn't been significantly modified over the past four decades, though some parts (like the door mirrors) were added later, and that it was complete when it arrived at the shop. Power for the Bulldog comes from a 5.3-liter V8 that's twin-turbocharged to 600 horsepower, figures that are still respectable in 2021.

Junkyard Gem: 2002 Jaguar XJR

One thing that's a constant in the big self-service car graveyards is the presence of massively depreciated European luxury sedans. These cars come from the factory stuffed full of complex leading-edge technology, and they require the owner to check every box on the maintenance schedule, year after year. Once that 10-year-old A8 or S-Class reaches its fourth owner, broken stuff often goes unrepaired, convenience-store generic oil goes in the engine (that is, if the engine even gets any new oil), and the European Luxury Sedan Doomsday Clock starts ticking. Here's a factory-hot-rod Jag that sold new for quite a bit more than a BMW 745i and just 20 bucks less than a Mercedes-Benz S430, back when Enron's machinations were in the news and a lot of energy-industry execs were about to get their luxury sedans repossessed, now in a Colorado self-serve yard. We live in a golden age of forced-induction engines in U-Wrench junkyards, with all sorts of turbocharged and supercharged machinery just waiting to provide the raw materials for a really stupid engine swap. The 4.0-liter, 370-horsepower V8 in the 2002 XJR would be just about perfect for installation into, say, a Datsun Maxima. This yard charges just $44.99 plus $10.60 in core charges and environmental fees for any supercharger, be it the dime-a-dozen Eaton M62 found on GM 3800s or the mighty M112 that was once buried between the heads on this engine. Thing is, you need to get to a car like this immediately after it hits the yard, because the first junkyard shopper with sufficient tools is going to grab that ultra-cool blower right away. The price tag for this car started at $71,830, which comes to about $105,550 in 2020 dollars. We can assume that some four-figure repair became necessary, and that this car's final owner had to let it go to the highest bidder with cash on hand… which turned out to be U-Pull-&-Pay. Look, you could still get a cassette player in a high-end luxury car in 2002! When do you suppose CD players will finally disappear from new cars? Here in the junkyard, the lowly Kia becomes equal to the majestic Jaguar. Perhaps their metals will be reused in a Geely next year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The security of knowing you'll never, ever lose it in the parking lot. Featured Gallery Junked 2002 Jaguar XJR View 20 Photos Auto News Jaguar Automotive History Sedan jaguar xjr Junkyard Gems

Junkyard Gem: 1971 Saab 96

Americans could buy the very first mass-produced Saab car, the 92, all the way back in 1950. Few did, because a tiny and odd-looking Swedish car with a smoky two-stroke engine buzzing out 25 horsepower didn't seem suitable for highway use, especially when a new Plymouth business coupe sold for $1,371 (about $15,180 today). Then came the 93, notable to Americans mostly for being sold by novelist Kurt Vonnegut's Saab dealership in Massachusetts. The first Saab to win over respectable numbers of American car shoppers was the 96, introduced here for the 1961 model year. North American 96 sales continued through 1973, and I've managed to find one of the later 96s in a junkyard located near Pikes Peak in Colorado. North American sales of the much less oddball 99 began in the 1969 model year, and that car evolved directly into the original 900 that sold very well through the early 1990s. Still, some Americans living in icy regions stayed loyal to the 96, so Saab kept selling 96s here until federal emissions and safety regulations made such sales unprofitable. Meanwhile, Scandinavians could buy new 96s all the way through 1980. My grandfather, a self-taught engineer who set foot outside the city limits of St. Paul, Minn., only to race Corvettes at Elkhart Lake (in summer) and all manner of rust-prone imports on frozen lakes (in winter), had this Saab 96 when I was a kid. The somewhat uneven bodywork near street level is the result of house-paint-over-Bondo corrosion repairs, and I recall going on some terrifying high-speed rides around town with Grandpa, circa 1975, watching the pavement flash by through the holes in the floor as we headed to the VFW for the meat raffle. Hey, the St. Paul VFW had Grain Belt on tap for cheap, a consolation for those who failed to win any meat. After that, a man could take his Saab to an establishment selling authentic St. Paul booya. As I recall, this Saab finally broke in half at an ice race in the late 1970s and got replaced by a slightly less rusty Rabbit. The serious Saab 96 nuts— including my grandfather— preferred the two-stroke three-cylinder engine, due to its chainsaw racket and allegedly superior performance on ice. By 1969, however, a Ford-produced V4 became the only powerplant available in a new 96 on our shores (the V4 had been an option for a couple of years prior to that). Someone grabbed the 65-horsepower V4 before I reached this car.

FCA, Ford idle plants due to semiconductor shortage

DETROIT (Reuters) - Ford and FCA will become the latest automakers to idle production facilities due to a semiconductor shortage. Ford's Louisville Assembly Plant in Kentucky will idle for a week, borrowing a down period from later in the year to compensate. Per Automotive News, FCA is idling its Brampton facility in Ontario, Canada, and one other site which has not yet been identified.  Louisville Assembly is the production site for the Ford Escape and Lincoln Corsair SUVs; Brampton Assembly produces the Chrysler 300, Dodge Charger and Dodge Challenger for FCA.  A Ford spokeswoman, who declined to identify the semiconductor supplier, confirmed the temporary shutdown to Reuters. In this, FCA and Ford join Nissan and potentially Honda in idling production in the wake of the shortage, which also hit Volkswagen late last year. The shortages are being blamed on consumer demand for silicon after production slowdowns resulting from the coronavirus pandemic. Volkswagen said it had to adjust production schedules in China, Europe and North America to compensate.  Nissan said it planned to reduce production of the Note, a hybrid electric car, at its Oppama Plant in Kanagawa prefecture, Japan, but did not give details of the scale of the output cut. The Nikkei newspaper reported that Nissan would slash its Note production at Oppama to about 5,000 units in January, from an initially planned 15,000 units. "A global shortage of semiconductors has affected parts procurement in the auto sector. As a result of this shortage, the Oppama Plant in Japan will adjust production in January, reducing production of the Nissan NOTE," Nissan said in a statement. (This article contains reporting from Reuters.)     Auto News Plants/Manufacturing UAW/Unions Chrysler Dodge Ford

Fiat eyes droptop SUV market with 500X convertible

Fiat will add a convertible version of the 500X crossover, Automotive News Europe has confirmed. The droptop variant will retain the side structure of the hardtop version, including the doors and door frames, and will utilize a roll-bar canvas top that incorporates the rear window, similar to the design of the 500 Cabrio. The open-air crossover is due to begin production this year. There's no word from FCA's U.S. arm on whether the model will come to the United States. Fiat's U.S. dealers might very well want it, given that they just lost the 124 Spider and the 500L hatchback for 2021. This despite the unenviable sales track record for crossover convertibles. Outside of hardcore off-roaders like the Jeep Wrangler (and, by all appearances, the new Ford Bronco), the notion of a convertible SUV has proven to be a sales flop. The odd-duck Nissan Murano Cross Cabriolet, which at least made more of an effort with its two-door body and full soft top, was nonetheless an embarrassing failure that expired with the second-generation Murano in 2014. Land Rover's first-generation Range Rover Evoque already had a two-door body style when it, too, took a stab at the idea with the Evoque Convertible for 2017. The Evoque was already something of a high-end fashion statement, so maybe the beautiful people who summer in the Hamptons or the south of France would want to bop around town in a baby SUV that allowed them to show off their fabulous selves. Turns out, no. The Evoque convertible pointedly was left on the shelf (along with the two-door hardtop) when the model was redesigned for 2020. Maybe things will be different for Fiat. In Europe, the 500X convertible will go up against the only other vehicle of its type, Volkswagen's T-Roc Cabriolet. At the launch of that VW in late 2019, Volkswagen's board member in charge of marketing asserted that the idea of combining a convertible and a crossover was "a great opportunity," and yet he also said, "From a rational side, you would never go into the cabriolet market.” For Fiat — as well as for Volkswagen — it's likely that one of those sentiments will prove correct.

FCA joining virtual CES with in-depth tours and Jeep Wrangler 4xe in AR

CES is sort of, technically happening, but it won’t be the CES weÂ’ve all become accustomed to over the years. Automakers will be doing their best to participate virtually, assuming they decide to join in the festivities at all. FCA is one that will have a little nugget of tech to share with us. A few main experiences will be made available to anybody with a computer. FCAÂ’s main draw is meant to be “highly detailed interactive product tours” where you can get to know a number of vehicles in a virtual world and hear from a “virtual brand ambassador” throughout the tour. You wonÂ’t be able to sit in and crawl through the cars like a normal auto show for the public, but FCA is promising a rather immersive experience online. The guided tour through the cars and technologies will be available in 12 FCA vehicles, two of those being the new Jeep Grand Wagoneer Concept and Alfa Romeo Stelvio Quadrifoglio. FCA plans to offer in-depth talks about how it tests vehicles, too. There are demonstrations planned for wind tunnels, the four-post shaker, an advanced drive simulator and general performance testing. Additionally, FCA plans on providing more insight into Uconnect 5 and vehicle electrification systems. WeÂ’re guessing the latter will offer up details on the Wrangler 4xe. The plug-in hybrid Wrangler will also be the star of FCAÂ’s AR play at CES. Everybody will be able to scan a QR code on FCAÂ’s site, then have access to a Wrangler 4xe on their phone. YouÂ’ll be able to “put it” in your driveway virtually, change the colors and get up close and personal with the interior.  All of this will launch on fcaces2021.com at 9 a.m. ET on January 11 (official first day of the virtual CES show), so surf on over there next week if you want to check it out. Related video:

2021 Jeep Grand Cherokee L vs Big Three-Row Crossovers | Spec comparison

The three-row 2021 Jeep Grand Cherokee L is here, entering an ever-growing segment of big crossovers that Jeep has ignored since the Commander of the late 2000s. Of course, the Dodge Durango has basically been a three-row version of the current Grand Cherokee with Dodge styling and a different interior, so it's not like The Corporate Entity Formerly Known as Chrysler has been without a contender in the segment. Jeep is a stronger brand than Dodge, however, and the three-row midsize segment is stronger than those with two rows (there's a vast sales difference between the Chevrolet Traverse and Blazer, as well as the Honda Pilot and Passport). In other words, the Grand Cherokee L could be a very big deal. It is also, quite literally, a very big deal. As you're about to see, it is now the largest three-row crossover, besting the length, wheelbase and height of even the gargantuan Traverse. There's more to the story than that, however, so we put together the below comparison chart to show you how the new Grand Cherokee L lines up on paper versus the biggest three-row crossovers. That includes the 2021 Ford Explorer, 2021 Kia Telluride, 2021 Hyundai Palisade and 2022 Chevrolet Traverse. This group also represents some of the strongest entries in the segment as well as those we feel are most likely to be considered alongside the big Jeep. To that end, we also included the 2021 Lincoln Aviator in the chart since its base price is actually less than what we anticipate the luxurious, range-topping Grand Cherokee L Overland and Summit trim levels to start.  Engines and drivetrains Note the differences in curb weight here. The Grand Cherokee L has the highest base curb weight of the group apart from the high-lux Aviator, yet its 3.6-liter V6 has the least amount of power and torque. Therefore, it'll be surprising if it's not the slowest in the group. There's of course the Hemi V8 available on the top Overland and Summit trim levels, but again, a hefty curb weight works against it. At 5,330 pounds, the lightest V8-powered JGCL weighs 600 pounds more than V6-power Explorer Platinum and ST models. On the other hand, nothing can touch the Hemi Jeep's towing capacity, and only the 400-hp Aviator betters the Jeep's base V6. Its 6,200-pound towing capacity greatly outdoes the 5,000-pound limits of not only the Telluride, Palisade and Traverse, but most others in the segment as well.

GM takes 2020 full-size pickup sales crown

It's no secret that 2020 was an unconventional year for auto sales. Extenuating circumstances or not, it was a year of upheaval even for ever-resilient (and ever-profitable) pickups, with General Motors taking the crown from Ford in the full-size segment.  The Ford F-Series still outsold every other full-size pickup nameplate in the country by a significant margin. It's only when you combine GM's Chevrolet Silverado and GMC Sierra variants that you get a number that exceeds Ford's. This isn't really a new phenomenon, either. In fact, it was only somewhat recently that Ford took the overall full-size crown away from GM, and not only did Ford widen the gap in recent years, but Ram has once again become a legitimate challenger, even managing to outsell the Silverado by a healthy margin in 2019, but never coming close to the F-Series in terms of total volume.  But, 2020 being 2020, things got weird yet again. Ram remains relevant, of course, but Ford got caught with its pants down thanks to the one-two punch of COVID and the generational changeover of the core F-150 model, which resulted in a production interruption as the company's assembly facilities transitioned from building the old 2020 model to the new-for-2021. This perfect storm, as it turns out, was sufficient for GM to walk away with the full-size crown. See for yourself: Full-size 2020 pickup sales: GM total: 847,110 F-Series: 787,422 Silverado: 594,094 Ram: 563,676 Sierra: 253,016 Tundra: 109,203 Titan: 26,439 As you can see, Ram slipped back behind Silverado, slotting comfortably into third place. The Silverado 1500 had a flat year, but the heavy- and medium-duty variants bucked the trend and contributed to a slight uptick in sales for the nameplate, while F-Series tumbled more than 12% (nearly 110,000 units), opening the door for GM to steam ahead.  There were similarly significant shakeups in the midsize truck segment. First, 2020 was the first full year of retail sales for the Gladiator pickup, which surged to fourth place behind the stalwart Tacoma, Ranger and Colorado. GM's combined sales of the Colorado and Canyon are good enough for second place by manufacturer, but nowhere close to what it would take to dethrone Toyota.

Cadillac Blackwing models will finally be revealed in February

It's been a little over a year and a half since Cadillac reworked the V line of performance sedans and teased something above its regular V cars. In that time, we've seen camouflaged prototypes and a teaser for a manual shifter with a 3D-printed topper, but hardly anything about specifications. That should all change next month. The company released a teaser announcing the reveal of the Cadillac Blackwing variants of the CT4-V and CT5-V on Feb. 1. The teaser hardly shows anything of the cars except a brief shot of someone shifting, and what sounds like a fairly ferocious V8 exhaust note. Based on prototypes and rumors, we're expecting the CT5-V to use a supercharged 6.2-liter V8, rather than the unique DOHC turbocharged V8 from the CT6-V, and the CT4-V will likely have a turbocharged V6. The CT5-V has also been spied with quite a bit of tire, 305-mm in the rear and 275-mm in the front. Based on these car's similarly powered predecessors, the ATS-V and CTS-V, they should be extremely entertaining. Related Video:

Cadillac Lyriq infotainment system will be 33 inches of something totally new

It’s screen day! Mercedes was first up with the EQS screen. Now, Cadillac just dropped more information on the massive infotainment screen going in its upcoming Lyriq EV, and the details are intriguing.  GM asked for some rather nontraditional help when designing and developing the LyriqÂ’s infotainment system. Both Territory Studio and Rightpoint were brought in to help Cadillac put something together that is hopefully nothing like the disaster that CUE was. The 33-inch LED screen spanning the width of the dash gave them plenty of real estate to get creative. Territory Studios is a global (originated in London) creative agency known for its expertise in user interface design, and itÂ’s worked on a number of video games, too. Rightpoint is a digital consultancy company that does a whole lot of everything in the digital world. Cadillac says the two companies were “focused on artfully integrating aesthetics, purpose and technology.” We wonÂ’t know how successful they were until we give it a shot, but Cadillac emphasizes that itÂ’s trying a fresh perspective for what an infotainment systemÂ’s user interface should be. Customizability and flexibility are two elements Cadillac is highlighting. There will supposedly be display themes “to fit the driverÂ’s mood and personality.”  The short 25-second video clip above preview shows a scaled-back and simple interface with a bottom row of essential function buttons. A menu list appears above this, and while there are likely many color themes available, the one shown is mostly dark with blues and blacks dominating the screen. One icon weÂ’ll point out is the colorful Google Maps icon in the menu list. Will Cadillac actually use Google Maps as the navigation system from the factory in the Lyriq? Perhaps. It tends to be exponentially better than any manufacturer-designed navigation system. Cadillac says more in-depth info will be available on January 12, so check back for a deeper dive then. You can peruse photos of the car getting this infotainment system below. Cadillac Lyriq View 8 Photos

2021 Mitsubishi Mirage and Mirage G4 updated with fresh faces, more tech

Mitsubishi previously teased an update for the Mirage and Mirage G4 for the 2021 model year, and now the new car is here. It amounts to a light refresh, with some minor appearance changes, new tech and a single special edition model. The same 1.2-liter three-cylinder is still under the hood, cranking out 78 horsepower and 74 pound-feet of torque. Brutally slow, but when paired with the CVT, it’s capable of 36 mpg city, 43 mpg highway and 39 mpg combined. The five-speed manual transmission is still available, but only on the base ES trim. On the design front, the Mirage (hatchback) and Mirage G4 (sedan) get a new grille and front bumper that are meant to be sportier than before. ItÂ’s highly reminiscent of the brandÂ’s crossovers with its upright, shield-like look, and that was intentional, Mitsubishi says. A new rear bumper and lower valance add width to the rear to give it the appearance of being larger than it is. New LED taillights are used on all Mirages, and redesigned LED headlights with LED running lights are available on the top trim. This design treatment does inject some fresh life into the two Mirages, but itÂ’s nowhere close to the full redesign that the Mirage is due for, having been in the same generation since the 2014 model year in the U.S. The interior gains new (supposedly improved) front armrests, more soft-touch cloth in frequently touched areas, and a “carbon fiber effect” on the window switches. On the tech front, Mitsubishi makes the seven-inch infotainment system with Apple CarPlay and Android Auto standard equipment. Also standard is forward collision mitigation with pedestrian detection. The top trim level gives you access to lane departure warning and auto high beams as optional equipment. That amounts to more safety features than before, but itÂ’s still a paltry selection compared to most new cars today. As for the special edition Mirage, Mitsubishi calls it the “Carbonite Edition.” Star Wars fans need not apply, though, as there is nothing about it that resembles true carbonite. Instead, it adds “a revised front grille and air dam, side air dam, B-pillar decal and rear air dam with carbon-pattern surfaces and contrasting red accents.” ItÂ’s pairable with six different colors and slots in below the top SE trim but above the mid-grade LE in price. The photos depict the two new colors available for 2021: White Diamond and Sand Yellow. The new going rate for a base Mirage is $15,390, which is $400 more than it was for 2020.

Honda and Acura electric crossovers will be built by General Motors

General Motors will partially offset the cost of developing electric technology by manufacturing battery-powered cars for Honda and Acura, according to an unverified report. Ultium battery technology is at the center of the deal. Without citing sources, industry trade journal Automotive News wrote that Honda has agreed to enlist rival-turned-partner General Motors as one of its EV suppliers during the first half of the 2020s. The factory that currently builds Chevrolet's Blazer and Equinox in Ramos Arizpe, Mexico, will begin manufacturing a Honda crossover in 2023, meaning it likely won't arrive until the 2024 model year. On the other side of the border, the former Saturn plant in Spring Hill, Tennessee, will churn out an Acura crossover beginning in 2024, about two years after it starts making the Cadillac Lyriq. Neither model has been revealed, and Honda hasn't commented on the report. Insiders familiar with the contents of the firm's product pipeline told Automotive News that both crossovers will be about as big as the Lyriq (pictured), which will be close in size to the 190-inch long XT5. Power for the two models will come from the Ultium battery technology that General Motors is developing for over a dozen electric cars, including the GMC Hummer and a Chevrolet-badged pickup we might discover next week during CES 2021. Both EVs will be built by General Motors, and they'll be powered by General Motors-developed technology (some will even receive OnStar and the hands-free Super Cruise driver assistance system), but everything motorists see and touch will be Honda- or Acura-specific. We're not expecting that the tie-up will spawn a pair of blandly badge-engineered crossovers; stylists will likely give each one its own design identity inside and out. Honda had previously confirmed plans to build at least two electric models on General Motors bones, and it announced that its American partner would also handle manufacturing, but this is the first time executives are throwing Acura onto the stage. What remains to be seen — assuming the report is accurate — is whether the Lyriq will compete directly against its Acura-branded sister model, or if they'll be positioned in different segments. Related video: Featured Gallery Cadillac Lyriq show car Green Acura Honda Electric

GM reports third straight sales drop in China in 2020

BEIJING — General Motors' vehicle sales in China fell 6.2% in 2020, as the U.S. automaker suffered a prolonged slowdown in the world's biggest auto market. GM, China's second biggest foreign automaker, delivered 2.9 million vehicles in the country last year, the company said on Wednesday, for a third straight decline in annual sales. But sales have been recovering in the second half of last year, up 12% between July and September and 14% in the final three months. GM has a Shanghai-based joint venture with SAIC Motor, in which the Buick, Chevrolet and Cadillac vehicle brands are made. It also has another Liuzhou-based venture, with SAIC and Guangxi Automobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of its Buick brand grew 4% on the year and Wuling rose 9%, the statement said. Luxury brand Cadillac's sales increased 8%. Sales of GM's more affordable Baojun brand dropped 33% last year, while sales of its mass-market Chevrolet tumbled 30%. GM's delivery of 2.9 million vehicles in China follows 3.09 million vehicles in 2019, 3.65 million vehicles in 2018, and 4.04 million in 2017, for a three-year decrease of 28%.

Carlos Ghosn asks why Japanese don't question him in Lebanon

BEIRUT — Former Renault-Nissan boss Carlos Ghosn said in an interview aired Monday that French investigators are coming to question him in Lebanon over some legal challenges in France, asking why don't the Japanese do the same thing. GhosnÂ’s comments came two weeks after a Lebanese justice ministry official said a team of French investigators will come to Beirut in January to participate in interrogating the former auto executive. Ghosn, who is a Lebanese, Brazilian and French national, fled Japan in a dramatic escape that drew headlines in late 2019, arriving in Lebanon on Dec. 30 of that year. In addition to his trial in Japan, the 66-year-old businessman is facing a number of legal challenges in France, including tax evasion and alleged money laundering, fraud and misuse of company assets while at the helm of the Renault-Nissan alliance. Ghosn said there is neutrality in Lebanon, where he has been living since fleeing Japan, adding that Lebanese authorities have asked Japanese officials to send the charges against him but Tokyo did not. “What does that mean?” asked Ghosn insisting that he is innocent and was the victim of JapanÂ’s judicial system. “Now the French have charges,” Ghosn said. “They (French) are coming and they will question me. The Japanese are not doing this.” “I consider all the charges to be false,” Ghosn said. After leading the Japanese automaker Nissan for two decades, Ghosn was arrested in Japan in November 2018 on charges of breach of trust, misusing company assets for personal gains and violating securities laws by not fully disclosing his compensation. He denied wrongdoing and fled Japan while out on bail awaiting trial. He is unlikely to be extradited from Lebanon, where he has been since last year. Ghosn said in the interview with the local LBC TV that Lebanon, which is passing through its worst economic and financial crisis in its modern history, “proved that it protects it citizens.” He added: “I am a French citizen, and the French state did not defend me.” At least two Ghosn-related investigations were opened in France. One focused on suspicious transactions between Renault and a distributor in Oman, as well as suspected payments for private trips and events paid by Renault-NissanÂ’s Netherlands-based holding company RNBV. Another investigation focused on suspected misuse of company funds for a party for Ghosn at Versailles.

Fisker electric pickup truck previewed in rendering

Fisker CEO and car designer Henrik Fisker has posted an illustration of an electric pickup, promising class-leading efficiency and radical design. The rendered truck features muscular flared fenders, a rooftop spoiler that doubles as a center high-mount stop light (CHMSL), and neat taillights that extend onto the bedsides. It's billed as a lifestyle vehicle rather than a workhorse, and does not wear any obvious name on the tailgate. The image was posted to Fisker's personal LinkedIn profile, as discovered by CarBuzz, along with the following caption: "Ok, yes, next vehicle might be a lifestyle pick up truck! But not just any truck! We want to create the lightest, most efficient EV pick up in the world! Making it, the most sustainable! image is just a teaser! Not the final: final will be way more radical!" While Fisker's excitement is conspicuous, and the truck does look cool, we can't help but question whether a production version is actually coming. About a year ago, Fisker tweeted an image of a pickup truck named the Alaska and then quickly deleted it. It had been captioned, "After our Fisker electric SUV, we have already decided on our next 2 EV’s on the same platform!" referring to what turned out to be the Ocean crossover. Perhaps it wasn't meant to be revealed just yet, or perhaps the timing was poor, considering that it came just days after a huge round of layoffs. In fact, Fisker has been bleeding talent, with one whistleblower claiming that the company is putting on a smoke-and-mirrors show to grab more cash from its Chinese investors. Whether or not the truck is vaporware, the projected timeline puts production sometime around 2025. It will be entering a very crowded marketplace, with 10 possible competitors coming to the EV pickup market, some coming from far more established players. As we said when Fisker showed the Ocean last July, it's proven it can talk the talk. Now it has to walk the walk. Related Video:

2021 Bentley Bentayga Hybrid revealed with tech improvements, same powertrain

The 2021 Bentley Bentayga Hybrid is here, and it’s treated to the same round of updates as the rest of the refreshed Bentayga lineup. That means it gets the new exterior design, a thoroughly revised interior and plenty of new tech. Nothing on the powertrain side has changed for the plug-in hybrid Bentley. ItÂ’ll continue to make do with a 3.0-liter twin-turbo V6 aided by an electric motor. Output remains the same at 443 horsepower and 516 pound-feet of torque combined. EPA range is not yet available, but given the 31-mile NEDC-tested range hasnÂ’t changed, we donÂ’t expect the 18-mile EPA-rated electric range to budge either. The biggest upgrade draw inside is the new 10.9-inch infotainment system. ItÂ’s the latest and best Bentley has to offer, and it features wireless Apple CarPlay and wired Android Auto. A wireless phone charger, new USB-C ports and a larger rear seat touchscreen remote tablet round out the best of the interior changes. ThereÂ’s more space for passengers in the rear. And Bentley upped its luxury game with a redesigned dash, instrument cluster (digital), door trims and steering wheel. The seats are re-done for even more comfort, too. Bentley hasnÂ’t detailed any fine tuning changes it may have made to the way the Bentayga Hybrid drives, but given our disappointing first drive a couple of years ago, we hope there are some unsung, under the hood improvements. The telltale sign that itÂ’s the PHEV is via the tiny “Hybrid” script on the lower door trim. Bentley says the updated Hybrid is available to order now, but we donÂ’t yet have a full breakdown of pricing. Expect it to maintain its status as the cheapest Bentley in the brandÂ’s lineup. Related video:

Mitsubishi Outlander Sport an even better value for 2021

Mitsubishi released pricing information for the 2021 Outlander Sport, its best-selling model in the United States. Redesigned for 2020, the crossover enters the new year with a cheaper base price thanks to a new trim. Pricing for the 2021 Outlander Sport starts at $22,090, including a mandatory $1,095 destination charge. For context, the 2020 model started at $23,690 once the same destination charge was added to the bottom line.  While the 2020 range started at the ES trim, the 2021 lineup begins with the S, which is only offered with front-wheel-drive. Every trim level gains an array of standard safety features for 2021, including forward collision mitigation, lane departure warning, and automatic high beams. Motorists who want rain-sensing wipers, LED fog lights, and automatic headlights will need to step up to the ES trim priced at $24,090 including destination. At the other end of the spectrum, the all-wheel-drive-only GT starts at $28,090. Mitsubishi gave buyers looking for something in between the bottom- and top-end trims an additional option by releasing a new trim called Limited Edition for 2021. Based on the ES trim, and priced at $25,090 when ordered with front-wheel-drive, it gains a black grille, black mirror caps, black 18-inch wheels, plus red accent stitching on the inside. It's limited in name only; don't expect to find a numbered plaque on the dashboard and a certificate of authenticity in the glovebox.  Power comes from a 2.0-liter four-cylinder engine, which makes 148 horsepower and 145 pound-feet of torque. Front-wheel-drive and a continuously variable transmission (CVT) come standard, and all-wheel-drive is available at an extra cost on most trim levels. Buyers who select the GT are rewarded with a 2.4-liter four rated at 168 horses and 167 pound-feet of twist. It's exclusively offered with all-wheel-drive, and it's also bolted to a CVT. According to the EPA, combined fuel economy checks in at 27 mpg for the 2.0, and 26 mpg for the 2.4. Mitsubishi stores across the nation will begin receiving the 2021 Outlander Sport in February. While it won't be joined by the i-MiEV, it's part of a broad model offensive that also includes the redesigned 2022 Eclipse Cross.  

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.

The Chrysler brand could be axed under Stellantis management

MILAN — While running NissanÂ’s North American operations from 2009 to 2011, Carlos Tavares had a reputation for closely watching costs with little tolerance for vehicles or ventures that didnÂ’t make money. Experts say that means Tavares, currently the head of PSA Group, is likely to follow that blueprint when he becomes leader of a merged PSA and Fiat Chrysler Automobiles. The low-performing Chrysler brand might get the axe as could slow-selling cars, SUVs or trucks that lack potential. Already the companies are talking about consolidating vehicle platforms — the underpinnings and powertrains — to save billions in engineering and manufacturing costs. That could mean job losses in Italy, Germany and Michigan as PSA Peugeot technology is integrated into North American and Italian vehicles. “You canÂ’t be cost efficient if you keep the entire scale of both companies,” said Karl Brauer, executive analyst for the iSeeCars.com auto website. “WeÂ’ve seen this show before, and weÂ’re going to see it again where they economize these platforms across continents, across multiple markets.” Shareholders of both companies are to meet Monday to vote on the merger to form the worldÂ’s fourth-largest automaker, to be called Stellantis. The deal received EU regulatory approval just before Christmas. Tavares, who for years has wanted to sell PSA vehicles in the U.S., wonÂ’t take full control of the merged companies until the end of January at the earliest. He likely will target Europe for consolidation first, because thatÂ’s where Fiat vehicles overlap extensively with PSAÂ’s, said IHS Markit Principal Auto Analyst Stephanie Brinley. Europe has been a money-loser for FCA, and factories in Italy are operating way below capacity — a concern for unions, given FiatÂ’s role as the largest private sector employer in the country. “We are at a crossroads,Â’Â’ said Michele De Palma of the FIOM CGIL metalworkersÂ’ union. “Either there is a relaunch, or there is a slow agonizing closure of industry, in particular the auto industry, in Italy.” ItalyÂ’s hopes lie with the luxury Maserati and sporty Alfa Romeo brands, but De Palma said investments are needed to bring hybrid and electric technology up to speed. FiatÂ’s Italian capacity stands at 1.5 million vehicles, but only a few hundred thousand are being produced each year. Most factories were on rolling short-term layoffs due to lack of demand, even before the pandemic.

Nissan will reduce its presence in Europe as part of turnaround plan

TOKYO — Nissan is planning to further reduce its presence in Europe and outsource the sales and manufacturing of its cars to alliance partner Renault, the daily Yomiuri newspaper reported on Friday. As part of its global turnaround plan, which is reversing a rapid expansion led by the ousted former chairman, Carlos Ghosn, Nissan will cut its distribution channels in thirty countries, mainly in East Europe. It is also planning to close its Avila plant in Spain and convert it into a warehouse, the report said. The report didn't provide details of the scale of the outsourcing. Calls to Nissan's public relations office went unanswered on Friday, a public holiday in Japan. The Japanese motor company is currently moving its operations away from Europe and shifting its focus to China, the United States, and Japan. Nissan, which expects to post a record operating loss of 340 billion yen ($3.25 billion) in the year to March 31, is cutting production capacity and model numbers by a fifth and aims to slash operating expenses by 300 billion yen over three years. The company's three-way alliance with Renault and Mitsubishi Motor was plunged into uncertainty in 2018, when Ghosn was arrested on financial misconduct charges, which he denies. He later fled Japan while being monitored by law enforcement and awaiting trial at his residence.

Junkyard Gem: 1996 Suzuki Swift SLOKYO DRIFT Edition

General Motors sold plenty of rebadged Suzukis over the decades in the United States, starting with the Chevy Sprint in 1985 and continuing with various Geo- and Chevrolet-badged machines into our current century. The one we remember best remains the fuel-sipping Metro, successor to the Sprint and available here through the 2001 model year. The Sprint and Metro were based on the Japanese-market Cultus, and Suzuki put its own badges on this car in the United States for the 1989 through 2001 model years. That was the Suzuki Swift, a car we know best today for its factory-hot-rod version, the Swift GT. Normally, I wouldn't bother to document an ordinary Canadian-built Swift found in a boneyard, but today's Colorado-found Junkyard Gem boasts some interesting custom touches that make it worth our attention. Get ready for… SLOKYO DRIFT! While countless American owners of Integras and Lancers and 240SXs went nuts with JDM-influenced car decor following the release of The Fast and the Furious: Tokyo Drift in 2006, drivers of the tiny and miserably underpowered Metro/Swift econo-commuters felt left out of the party. The owner of this car knew what to do, though: buy some stick-on mailbox letters and slap them on this Swift's hatch. Junkyard-acquired badges adorn every surface of the SLOKYO DRIFT Swift, because why not? It turns out that many Reddit regulars in Colorado spied this car on the street, and so you'll find many references to it on that site. Since any 24-year-old econobox with a manual transmission and a salvage title will be nearly impossible to sell, we can assume this car spent its last few years just one broken part away from The Crusher. Once it needed an expensive repair, it wasn't worth fixing. The original owner's manual and documentation remained in this Swift until the end. It appears that Colorado TV-advertising legend Dealin' Doug moved this iron off his Cherry Creek Dodge lot when it had a mere 5,920 miles on the clock, based on this "Phoney Monroney" I found in the glovebox. 168,925 hard miles later, here it is. At some point, it got totaled, put back together, and stamped with this REBUILT FROM SALVAGE lettering on the door jamb. We think of the Metro/Swift as a three-cylinder car, but many of the later versions got this 1.3-liter "big-block" four-banger under the hood. That's 70 raging horsepower right here. The 5-speed made it more efficient and fun to drive, but killed whatever resale value it may have had.

Hybrid and Electric Jeeps, Fiats, and Alfa Romeos to be built in Poland

WARSAW - Fiat Chrysler will invest more than $200 million in its plant in Tychy in Poland, where new hybrid and electric Jeep, Fiat and Alfa Romeo models will be built, Deputy Prime Minister Jaroslaw Gowin said on Tuesday. The investment comes as a boost to emerging Europe's largest economy, which is hoping a switch to electric vehicles can help its auto sector catch up with regional rivals including the Czech Republic and Slovakia. "Modern, hybrid and electric cars of the Jeep, Fiat and Alfa Romeo brands will start to leave the factory in Tychy in 2022," Gowin wrote on Twitter. Gowin said there could be further investment in the plant in future but gave no details. Fiat Chrysler, which is planning a $38 billion merger with French rival PSA to create the world's No.4 carmaker, said in a statement that early preparations for the expansion and modernization of the plant started in late 2020. The plant in Poland's industrial southern region of Silesia is one of the company's largest and currently employs around 2,500 people. Fiat Chrysler confirmed that new hybrid and electric Jeep, Fiat and Alfa Romeo models would be built in Tychy. It said the aim was to start mass production of the first of the three new passenger car models for the group's brands in the second half of 2022. Under a 2018-2022 plan, FCA pledged to invest 9 billion euros in electrification as part of investment plans totaling 45 billion euros. (Reporting by Alan Charlish and Agnieszka Barteczko in Warsaw, Silvia Recchimuzzi in Gdansk; editing by Jason Neely and Susan Fenton) Auto News Government/Legal Green Plants/Manufacturing Alfa Romeo Fiat Jeep Green Automakers Electric Future Vehicles Hybrid