2008 Acura Mdx Base Sport Utility 4-door 3.7l on 2040-cars

Auto blog

2023 Acura TLX Type S PMC Edition adds NSX colors to the palette

The 2023 Acura TLX Type S is getting a PMC Edition with some extra-pretty color options derived from the Acura NSX.  Per usual with Acura’s PMC Edition cars, the TLX Type S PMC Edition is hand-built at the same Performance Manufacturing Center in Ohio as the NSX is. The regular TLX Type S is right down the road in Marysville, Ohio, so while itÂ’s not a massive location change, the environment in which the PMC cars are built in is entirely different from AcuraÂ’s typical assembly lines. As for the new colors, youÂ’ll be able to choose between Long Beach Blue, Curva Red and 130R White — all of those shades were previously offered on the NSX. In addition to the main shade, all PMC Edition cars will get a Berlina Black (also an NSX shade) painted roof, antenna and door handles. The quad exhaust will also be finished in black chrome instead of the bright chrome that comes standard. You get the same Y-spoke 20-inch wheels as the regular Type S has, but these are finished in a copper paint, and they sure do stand out. Other exterior changes include a carbon fiber lip spoiler and rear diffuser alongside glossy black side sill garnish and model badging. On the inside, Acura uses carbon fiber trim and adds illuminated side sills and unique Type S-badged floor mats. Each exterior color is paired with a single interior option. The Curve Red car gets an Ebony black interior with red stitching. All Long Beach Blue cars get an Orchid (cream) interior with blue stitching. And finally, the 130R White cars will get a red interior. All PMC Edition cars get a serialized plaque on the center console, as well. Similar to other Acura PMC cars of the past, this one is put through the same quality control checks as the NSX, including a dyno check, rough road simulation and paint inspection. TheyÂ’re also given special coverings for transport to the dealer and delivered via fully enclosed single-car carriers. Yes, you should expect the paint to be utterly perfect upon first inspection. Pricing for the PMC Edition isnÂ’t out yet, but expect it to be available when Acura releases pricing for the full lineup of 2023 TLX models. Related video:

Honda Expands Takata Airbag Recall To 5.4M Units In The US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

Acura's MDX SEMA concept took the wrong parts from the NSX GT3

When it comes to SEMA show cars, the more absurd the better, such as with the 1,040-horsepower Bisimoto Hyundai Santa Fe. That's not the case with Acura's custom MDX. This crossover was designed to match the NSX GT3 racecar, and gets a custom trailer to tow it. However, instead of doing something awesome like dropping in the NSX's twin-turbo V6, Acura decided the defining characteristics of the race car were the paint, splitter, and wing. So that's what the MDX and trailer got. In addition to a matching white paint scheme with orange and black accents, the SUV wears a massive front splitter that looks like a shelf stuck close to the ground. It's the only aero modification on the vehicle, and it just looks silly, what with the massive gap between the base of the bumper and the splitter itself. There aren't any performance modifications on this SUV either, except the lowered suspension, so the only thing the splitter is likely to do is break off on the first mildly steep driveway it comes across. To complement the MDX's dubious aero aid, the custom trailer gets a "wing" at the back. Actually, it looks like Acura slapped some endplates on the back to give it a wing look. The trailer also gets running boards that extend the splitter along the side. Maybe it all works together to keep the trailering rig planted. But probably not. If Acura wants suggestions for next time, we suggest a mid-engined MDX, or perhaps one with a wild hybrid system. We'll call this a missed opportunity. Related Video: Featured Gallery Acura MDX with custom NSX GT3 Trailer: SEMA 2016 View 11 Photos Related Gallery 2017 Acura MDX SEMA concept Image Credit: Live photos copyright 2016 Drew Phillips / Autoblog Design/Style SEMA Show Acura Crossover Racing Vehicles acura mdx acura nsx gt3