Three Low Miles 4 Dr Hatchback Cvt 1.8l L4 Fi Dohc 16v Barcelona Red Metallic on 2040-cars

Auto blog

Toyota, Mazda drop Takata as Mitsubishi, Subaru weigh options

It's not a very good time to be Takata right now. Fresh on the heels of longtime partner Honda ditching them, Toyota and Mazda have both come out and said they will not use the company's airbag inflators if they continue to rely on ammonium nitrate. Bloomberg reports that Subaru and Mitsubishi are also contemplating a divorce. "The inflator using ammonium nitrate produced by Takata will not be adopted by Toyota," President Akio Toyoda said during a briefing today. "What's most important above anything else is the safety and peace of mind of customers." Mazda echoed that position, simply saying it "will not use Takata airbag inflators which contain ammonium nitrate in our new cars." When you lose three huge OEM accounts in as many days, it's certainly going to have a deleterious effect on your fortunes. In Takata's case, that's meant a staggering 39-percent drop in their share price over the last three days. Yesterday alone, the company saw a 6.2-percent fall, Bloomberg reports. As the business publication reports, though, Takata isn't going down without a fight. The company is "considering some plans to survive," including a fundraising plan that will see it potentially offer up additional shares for sale. Still, at least one analyst doesn't see whatever company survives staying involved in the airbag inflator business. "I really don't see how they're going to be able to survive as an inflator manufacturer," Valient Market Research founder Scott Upham told Bloomberg. "When your major clients publicly come out and say that they're not going to use your products anymore, it makes this very difficult to sustain your business." News Source: Automotive News - sub. req.Image Credit: Carlos Osorio / AP Honda Mazda Mitsubishi Subaru Toyota Safety supplier

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2016 Mazda MX-5 Miata named World Car of the Year

Kicking off Day Two of the New York Auto Show, the World Car of the Year awards are finally being handed out. The overall winner is, as God himself intended, the Mazda MX-5 Miata. It beat the Audi A4 and the Mercedes-Benz GLC-Class. The unique thing about these awards are that they aren't limited to the US domestic market (that's why they're called the World Car of the Year awards). For example, nominees for the overall award included the Skoda Superb, Renault Kadjar, and Subaru Levorg. In the Performance category, the forbidden fruit was repped by the Honda Civic Type R. But both the Civic and the Mercedes-AMG C63 Coupe were beat out by a far more expensive competitor – the new Audi R8. The fourth-generation Toyota Prius and the second-generation Chevrolet Volt, were two of the big finalists for the World Green Car of the Year award. They both lost out, though, to the Mirai fuel-cell car. Yes, a hydrogen car beat out two of the world's premiere hybrids. The luxury race that was perhaps the hardest to predict. That's because each of the three finalists have received near universal acclaim. In the end, though, the BMW 7 Series beat out the Audi Q7 and Volvo XC90. Finally, we have the World Car Design of the Year, where the overall winner (MX-5) and the Mazda CX-3 faced off against the new Jaguar XE. While both the CX-3 and XE are handsome vehicles, the WCOTY committee realized the answer is always Miata, and awarded Mazda's iconic roadster another 2016 award. Related Video: AND NOW THERE IS ONE... MAZDA MX-5 - 2016 WORLD CAR OF THE YEAR NEW YORK – March 24, 2016 - For Immediate Release The Road to World Car journey ended today with the declaration of the MAZDA MX-5 as the 2016 World Car of the Year. The winner was announced during a press conference hosted by the New York International Auto Show, Bridgestone Corporation and Autoneum. 2016 marks the 10th anniversary of the partnership between World Car and the New York show, and the third consecutive year that the World Car Awards have retained their ranking as the number one automotive awards program in the world in terms of media reach. Mazda Motor Corporation is no stranger to the World Car Awards program – now in its 12th year. The Mazda2/Mazda Demio was the 2008 World Car of the Year. While the Mazda3 (2014), Mazda6 (2013) and Mazda MX-5 have all earned "Top Three in the World" status as voted by our 70 plus international automotive journalists that make up the jury.