2008 Toyota Fj Cruiser on 2040-cars

Auto blog

Toyota spending $168 million to make more Mirai fuel cell vehicles

The last semi-official number we had for pre-orders for the 2016 Toyota Mirai fuel cell vehicle was around 200. But demand is strong enough that Toyota is saying that it will spend 20 billion yen ($168 million US) to expand annual production capacity at the "secretive workshop" where the Mirai will be built from 700 in the first year (2015) to around 2,000 after that. Japanese newspaper Nikkei reported the increase and also breaks down where Toyota expects to sell the small number of Mirai vehicles it will make in the first few years: 400 in Japan by the end of 2015, 200 or 300 In the US in 2015 (and then 3,000 by the end of 2017) and between 50 and 100 in Europe annually starting around 2016. To make all of these hydrogen cars, Toyota will add two lines to the factory where the fuel cell stacks and tanks are built and it will also upgrade the assembly location. In the US, the Mirai will initially only be sold in California next year and will start at $57,500 or lease for $499 a month for 36 months (with $3,649 due at signing). The Japanese automaker is including hydrogen fuel for "up to three years" at that price, mostly because no one knows how to accurately measure and sell H2 for cars quite yet.

NHTSA releases updated Takata airbag recalled cars list, but it still has errors

Unfortunately, the government's list still contains errors.
The National Highway Traffic Safety Administration has issued an updated list of vehicle models that it's urging owners to repair under the mushrooming Takata airbag inflator recall. The latest version adds vehicles from new automakers like Subaru and Ford that are missing from the original announcement, and it also removes erroneous entries from General Motors, leaving only the 2005 Saab 9-2X (a reskinned Subaru WRX), and the 2003-2005 Pontiac Vibe, a joint project with Toyota.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.