2006 Xls Used 3.5l V6 24v Automatic Front-wheel Drive Sedan on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2014 Toyota Corolla and Tundra production underway

After months of leaked photos and speculative reports, Toyota finally unveiled its 2014 Corolla to the world in early July at a star-studded California party. The confetti has been swept up and the champagne flutes washed and stored, and now the real work can begin: production. Toyota has announced that its new C-segment player has begun rolling off the lines at its plants in Mississippi and Ontario, Canada this week ahead of the planned start of sales in September. What's more, the refreshed 2014 Tundra pickup has also segued into production in San Antonio, Texas.
Corolla production in Mississippi is still a relatively recent phenomenon, with the plant having begun assembly of the outgoing model in the fourth quarter of 2011, while Toyota's Cambridge, Ontario plant has been churning out the compact volume king since 1988. Conversely, the Tundra has been in production at the Texas facility since 2006, and Toyota projects that the plant will build its milestone one-millionth new vehicle in September, right around the time the reworked fullsize pickup goes on sale.

Toyota announces Geneva plans including droptop FT-86 Open concept

Automakers from around the globe are gearing up for the Geneva Motor Show next month, and Toyota is giving us a couple teasers of what will be in its display. In addition to what appears to be a single-seat concept called the i-Road (shown at right), Toyota will also give us our first look at a droptop Scion FR-S courtesy of the FT-86 Open Concept.
All we have to go on right now is this sketch shown above, but we do see that this car will retain its rear seats, which could be a potential advantage over one of its key rivals, the Mazda MX-5 Miata. Toyota says that this concept will be used to gauge public interest in such a convertible, but we've already heard that a Scion convertible is already planned to go on sale as soon as early next year. As far as Toyota's other concept, there also isn't much information about the i-Road except that it will be a zero-emissions vehicle and it will have seating for two passengers, which based on the drawing will have the driver sitting in front of the passenger.
Toyota will also show off the European version of the new RAV4 as well as its new Auris Touring Sports, which it refers to as a "medium-size estate." Scroll down for Toyota's tease of a press release.