2006 Subaru Outback Xt Wagon 4-door 2.5l Limited on 2040-cars

Auto blog

Subaru BRZ to get second generation, says exec

Hallelujah friends, hallelujah. One of the highest voices in Subaru's parent company, Fuji Heavy Industries, has just said that the boxer-obsessed automaker will release a second generation of the lovable BRZ.
Yasuyuki Yoshinaga, president of FHI, has summarily shot down assertions made by Tetsuya Tada, the chief engineer for the Toyota GT86. In a recent interview with an Australian publication, Tada claimed that Subaru had not decided whether it would be involved in the followup effort to the rear-drive coupe, and even speculated that the Toyota could team with BMW for a second-gen car, instead.
"If I were to be told that, I'd pass out. It's not going to be just one generation," Yoshinaga-san told Automotive News.

2020 Subaru Outback Suspension Deep Dive | More than meets the eye

The 2020 Subaru Outback is a completely redesigned car. It has a lot to offer in terms of new convenience features, and the driving experience is much improved. A good deal of that comes from chassis improvements, and indeed a lot of work went into making the body shell and suspension subframes more rigid so the suspension attachment points could be more robust and stable. Don’t let all of that rigidity talk make you think the ride itself is stiff. It isnÂ’t. Any suspension tuning engineer will tell you that a stable platform is necessary even if a smooth ride is the goal. Rigid attachment points make it easier to control ride motions and road imperfections within those components designed for that very job – the springs, dampers and suspension bushings. So letÂ’s take a look at what Subaru has done under the new Outback. What weÂ’re about to see doesnÂ’t just apply to the Outback wagon, but to the closely-related and also-redesigned 2020 Legacy sedan as well.   ItÂ’s no surprise that a vehicle like the Subaru Outback uses strut front suspension, but from here, a couple of details do look curious.   Like any strut suspension, the steering axis (yellow line) is defined by the pivot bushing at the top of the strut and the center of the lower ball joint. The entire affair will pivot about this line when the wheels are turned. The lower control arm (red) of the newly redesigned 2020 Outback is now a lightweight aluminum piece instead of the steel hunk that was used last year. As before, thereÂ’s a “direct-acting” stabilizer bar link (green) that attaches to the strut housing, an arrangement that maximizes the efficiency of the stabilizer bar because the motion ratio is 1-to-1 motion with respect to wheel movement. As for the stabilizer bar itself, itÂ’s now hollow to save a bit of weight.   This spacer (yellow) raises the body relative to the suspension. The Outback has one, but the lower-riding Legacy sedan does not. The spacer pushes the arm down (or the body up - take your pick), so that means the OutbackÂ’s reinforcing bracket (green) will also differ from that of the Legacy. While weÂ’re here, look at the round rubber bushing just below the spacer. That void space and square nub you see pointing directly at you will make sense in a short while.   Subaru couldnÂ’t simply put a spacer on the OutbackÂ’s rear lower control arm pivot and call it good. They had to do something of similar magnitude at the front.

NHTSA, IIHS, and 20 automakers to make auto braking standard by 2022

The National Highway Traffic Safety Administration, the Insurance Institute for Highway Safety and virtually every automaker in the US domestic market have announced a pact to make automatic emergency braking standard by 2022. Here's the full rundown of companies involved: BMW, Fiat Chrysler Automobiles, Ford, General Motors, Honda, Hyundai, Jaguar Land Rover, Kia, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Subaru, Tesla, Toyota, Volkswagen, and Volvo (not to mention the brands that fall under each automaker's respective umbrella). Like we reported yesterday, AEB will be as ubiquitous in the future as traction and stability control are today. But the thing to note here is that this is not a governmental mandate. It's truly an agreement between automakers and the government, a fact that NHTSA claims will lead to widespread adoption three years sooner than a formal rule. That fact in itself should prevent up to 28,000 crashes and 12,000 injuries. The agreement will come into effect in two waves. For the majority of vehicles on the road – those with gross vehicle weights below 8,500 pounds – AEB will need to be standard equipment by September 1, 2022. Vehicles between 8,501 and 10,000 pounds will have an extra three years to offer AEB. "It's an exciting time for vehicle safety. By proactively making emergency braking systems standard equipment on their vehicles, these 20 automakers will help prevent thousands of crashes and save lives," said Secretary of Transportation Anthony Foxx said in an official statement. "It's a win for safety and a win for consumers." Read on for the official press release from NHTSA. Related Video: U.S. DOT and IIHS announce historic commitment of 20 automakers to make automatic emergency braking standard on new vehicles McLEAN, Va. – The U.S. Department of Transportation's National Highway Traffic Safety Administration and the Insurance Institute for Highway Safety announced today a historic commitment by 20 automakers representing more than 99 percent of the U.S. auto market to make automatic emergency braking a standard feature on virtually all new cars no later than NHTSA's 2022 reporting year, which begins Sept 1, 2022. Automakers making the commitment are Audi, BMW, FCA US LLC, Ford, General Motors, Honda, Hyundai, Jaguar Land Rover, Kia, Maserati, Mazda, Mercedes-Benz, Mitsubishi Motors, Nissan, Porsche, Subaru, Tesla Motors Inc., Toyota, Volkswagen and Volvo Car USA.