2025 Ram 1500 Laramie on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

2019 Ram 2500 Heavy Duty starts at just over $35,000

Pricing has been announced for the 2019 Ram Heavy Duty models, and they are barely more expensive than the old models. The 2019 Ram 2500 starts at $35,090, just $350 more than the outgoing version. The base 3500 model starts at $36,540, which is only $400 more than before. The chassis cab version starts at $36,445. This pricing keeps the new Ram close to the price of the current price leader, the Ford F-250, which starts at $34,745. Both 2500 and 3500 models come in at less than the current Chevy Silverado 2500HD's base price of $39,095. These prices will get you a Ram Heavy Duty with the standard 410-horsepower 6.4-liter gas-powered V8. For the entry-level Cummins diesel engine with 370 horsepower and 850 pound-feet of torque, you'll need to add $9,100. The high-output Cummins engine with 400 horsepower and 1,000 pound-feet of torque is naturally even more expensive at $11,795. Now we also know that full-size trucks can get pretty expensive, and the Ram Heavy Duty is no exception. The most expensive starting price is for the Ram 3500 Limited with the Mega Cab and four-wheel-drive, at $67,050. Adding the high-output Cummins engine would bring that to $78,845. We don't know what options will be available, but we wouldn't be surprised if that particular truck could crest $80,000 with a few extras. Related Video:

Here's how I averaged 31.5 mpg in a Ram HFE EcoDiesel

Few things could be more American than a bright red Ram pickup parked in front of Mount Rushmore. To get there and back on a single tank of fuel from the nearest major city, however, requires a collaboration of international proportions. This particular Ram is a 1500 HFE EcoDiesel, festooned with badges indicating the presence of an Italian turbodiesel V6 mated to a German eight-speed automatic. Some Rams are even built in Mexico, but this one only boasted a 27 percent Mexican parts content. A rather global truck, this one. It is the sum of its parts, but those bits and pieces were curated by a team of engineers in Michigan. At the risk of hipstering its history, the Ram HFE (High Fuel Efficiency) package was truly custom-tailored for one purpose: Achieving an EPA-rated 29 mpg on the highway, which is 1 mpg better than a standard Ram 1500 EcoDiesel. It did just that. No, it did better than that, but more on that in a minute. The Ram has stuck with its "son of big rig" styling for nearly 25 years; opting for the EcoDiesel V6 means you can fill up next to Peterbilts. My goal was to bypass truck stops entirely. I left Denver early in the morning and aimed to enjoy lunch with Washington, Jefferson, Roosevelt, and Lincoln looking over my shoulder before heading home for dinner. Mt. Rushmore is about 370 miles away from the northernmost truck stop within Denver, where I filled the Ram HFE's tank and headed northbound on Interstate 25 toward Wyoming and a series of smaller highways that roughly follow an old stagecoach route from Cheyenne to what is now Mt. Rushmore in South Dakota. The Ram was such a fuel miser that I could have driven an extra 50 miles each way and still avoided the pumps. It's beautifully stark country: the kind of desolate place where the FM radio does a lot of seeking; that's all the audio I had on board because the Ram HFE is decidedly lacking in comfort and convenience features. To get to an EPA-estimated 29 mpg highway figure, Ram engineers had to goals: To strip weight and improve aerodynamics. In the wind tunnel, the medium-size 4x2 Quad Cab with 20-inch wheels and the Ram Express trim level's one-piece front bumper proved the most aerodynamic configuration of the many flavors of Ram available. Interestingly, testing revealed that adding full-length tubular side steps and a tri-fold tonneau cover normally offered in the Mopar accessories catalog aid aerodynamics.