2021 Ram 1500 Big Horn/lone Star on 2040-cars

Auto blog

2019 Ram Heavy Duty gets new face, 1,000 lb-ft Cummins and the towing crown

We've seen uncovered images before in spy shots, but here are the official images and word on the 2019 Ram Heavy Duty pickups. Ram dropped so much verbiage on new features that we'd need the truck's 7,680-pound max payload rating to haul the press releases, so dig in. We'll start with that max payload rating, and the 35,100-pound tow rating. Gimlet-eyed truck watchers will note the Ram HD's max tow rating is exactly 100 pounds more than that available on a Ford Super Duty, meaning the Auburn Hills clan takes the "best-in-class" mantle for a few months. The other big number: 1,000 pound-feet of torque from the high-output version of the 6.7-liter Cummins inline-six turbodiesel, a 70-lb-ft increase over the 2018 Ram 3500 HD. Completing the specs at the top, that HO motor produces all that torque at 1,800 rpm, and makes 400 horsepower at 2,800 rpm. One step down, the standard-output 6.7-liter Cummins puts out 370 hp and 850 lb-ft. Thanks to developments like a compacted graphite iron block, lighter pistons, hollow camshaft, and new forged connecting rods and bearings, the Cummins engine has lost more than 60 pounds. The entry-level motor is a 6.4-liter Hemi gas-powered V8 with an unchanged 410 hp and 429 lb-ft. 2019 Ram Heavy Duty View 12 Photos The HO Cummins pairs to an Aisin AS69RC six-speed transmission, with upgraded hardware and programming for better shifting and oversight of the gravity-warping torque. The regular Cummins mates to a "significantly upgraded " version of the in-house 68RFE six-speed automatic. The 6.4-liter Hemi works with the well-known TorqueFlite 8HP75 eight-speed automatic, bolstered for heavy duty obligations, the first time the eight-speed makes an appearance in a Ram HD. A column-mounted shifter works the gearsets on the Cummins-equipped rigs, a rotary dial on the center stack controls the shift-by-wire eight-speed. The Cummins motors come with two 220-amp alternators. The Hemi V8 gets a 220-amp and a 160-amp alternator, which Ram says is the "first gas-driven application of its kind in either class." There will be six trims available: Tradesman, Bighorn/Lonestar, Power Wagon, Laramie, Laramie Longhorn, and Limited. The HD trucks don't share any exterior sheetmetal with the light-duty 1500, and each trim is known by different grilles, bumpers and wheels.

Ram 2500 HD video shows off new engine, rear suspension

We've already had a chance to drive the 2014 Ram 3500 HD, but the big news for the 2014 Ram Heavy Duty lineup might be centered around the three-quarter-ton 2500 model. Chrysler has released a new video highlighting the new features of the 2014 Ram 2500 HD, including its new optional engine and new rear suspension components.
The video starts by showing off the Ram's new 410-horsepower 6.4-liter Hemi V8 and then gives us an up-close look at the coil spring, multi-link rear suspension - one of the truck's most important upgrades aimed at delivering a smooth ride. In addition to this coil suspension, the Ram 2500 HD will also be available with a rear air suspension system, which Chrysler says will optimize the truck's hauling abilities with better load leveling and trailer towing.
Scroll down for the walkaround video of the 2500 HD from Chrysler as well as the original press release breaking down all of the truck's new-for-2014 features.

2019 Ram 1500 eTorque Drivers' Notes Review | Filling in the gaps

When the 2019 Ram 1500 debuted earlier this year at the 2018 Detroit Auto Show, the biggest news was arguably the addition of the 48-volt mild hybrid system. Dubbed eTorque, the system is standard on V6-equipped models and a $1,450 option on trucks with the 5.7-liter Hemi V8. It's not a hybrid in the traditional sense. Despite Ram's claim that the system adds up to 130 pound-feet of torque on the V8, it only does so for a fraction of a second and doesn't actually change the engine's total output. You'd be hard pressed to notice a difference if you didn't know the system was there. But that's kind of the point. There's been a lot of confusion about what eTorque is and how the system works. Much of that falls on FCA's shoulders. The automaker didn't do a great job of explaining the whole thing, leaving us to work out much of it for ourselves. This isn't meant to boost performance, towing or payload. The Ram eTorque can't run on battery power, so don't expect a Toyota Prius with a bed and wood trim. It's here to make the truck just a little bit more efficient by improving areas where conventional internal-combustion engine's fall short. The eTorque system replaces the engine's alternator with a small, belt-driven electric motor. On the V6, the motor is part of the water pump assembly and driven by that belt; the V8 uses a dedicated belt that's separate from the other accessories. A small battery pack is mounted upright behind the rear seats inside the truck's cabin. There's also a DC-to-DC converter to charge the battery and convert 48 volts down to 12 to power the truck's normal systems. Visually, the only difference between an eTorque-equipped model and a standard one is a small metal box at the top of the engine. There's no badging and the battery pack can't be seen, even with the rear seats folded up. The system is designed to be as seamless and innocuous as possible. The auto start/stop system spins up the engine a little quicker. Shifts from the eight-speed ZF automatic transmission are a little smoother as the eTorque system smooths out and fills in the gaps. It does so for a fraction of a second, but it works its magic often. Big gains in fuel economy have already been made. It's going to take things like Ram's eTorque system to improve internal combustion engines from here on out. Editor-in-Chief Greg Migliore: I'd like to say I noticed a huge difference between the Ram eTorque and the regular Ram, but I didn't. That's how it's supposed to work.