Ram 3500 SLT 4WD, page #9

Auto blog

Airbags on some 2019-2020 Ram 1500 pickups might not work

FCA has issued an airbag-related recall for 295,981 Ram 1500 pickup trucks, but in this case, there is no risk of explosions. Instead, the airbags and the seat belt pretensioners might not work at all. According to Ram, some 1500 trucks from the 2019 and 2020 model years might have faulty Occupant Restraint Controllers (ORC). The flash memory in the ORCs could become corrupt, which would then interfere with the pickups' safety features. As a result, the seat belt pretensioners and the airbags could become disabled. This is obviously a major problem, should occupants get into a crash after this occurs. The recall was filed to NHTSA.com on May 31, 2019, and uses campaign number 19V407000. Starting July 20, 2019, FCA will notify owners if their trucks are affected, and dealers will provide the fix. The ORC will either be reprogrammed or completely replaced at no cost to the customers. Questions can be addressed through Chrysler's customer service number, 1-800-853-1403, with V61 and V71 recall reference numbers.

FCA's U.S. sales chief sues company for wrongful retaliation

Some fresh controversy is brewing at Fiat Chrysler Automobiles as The Detroit News reports that the head of U.S. sales has filed a federal whistleblower lawsuit against the company.. Reid Bigland, who's also in charge of the Ram truck brand, alleges that FCA made him a scapegoat for wrongful sales inflation practices and fixing vehicle sales statistics, which are currently under investigation by federal agents. Bigland claims that FCA executives punished him for cooperating with the federal investigators in the case by cutting his pay by more than 90 percent, according to the lawsuit he filed. The plan apparently was to use the money saved to pay for fines following any settlements made with the Securities and Exchange Commission. So far, the lawsuit alleges that FCA cost Bigland over $1.8 million in income. "They had the largest growth in retail sales in 17 years last year and refuses to pay him," Deborah Gordon, Bigland's lawyer in the case, said to The Detroit News. "Why is that? Because he participated in the SEC investigation and they don't like what he said." Bigland claims he just cooperated with the SEC investigation by testifying about FCA's sales reporting, from the time he took the position to the period prior to being appointed the company's U.S. sales chief. "In late 2018, presumably as a way to wrap up their investigation with some result, the SEC suggested to plaintiff that he admit to some wrongdoing as to defendants' monthly sales reporting," Gordon further said in a statement as part of the lawsuit. "The SEC also suggested a resolution involving some penalty to FCA. Because (Bigland) had not engaged in any wrongdoing, and there was no wrongdoing, he declined to do so." However, exacerbating the issue is the fact that Bigland reportedly sold his shares in the company last year, prompting FCA to act against him even more. FCA came under fire recently by federal agents in at least two separate investigations, potentially exposing conspiracy and corruption between company executives and private entities. The investigations are being led independently by the U.S. Attorney's Office and the FBI. So far, eight convictions were reportedly secured, with one including former Fiat Chrysler Automobiles Vice President Alphons Iacobelli, as one of the defendants. Iacobelli was one of the former top labor-relations executives for the automaker.

2019 Ram 3500 Regular Cab Big Horn Review | No B.S., just lots of truck

While luxury trucks of all sizes from all makes are growing in popularity, they are particularly prevalent in the heavy-duty segment, where they tow toys worth far more than the truck itself. Want proof? The volume-selling GMC Sierra HD is actually its most expensive version: the Denali, slathered with leather and chock full of convenience features. But the person who buys this 2019 Ram 3500 4x4 Big Horn Regular Cab would say they don't care about any of that crap. This is a dedicated tool for towing and especially hauling — even more dedicated than the Ram 2500 HD that was also overhauled for 2019. It has a regular cab with a three-person bench and no back seat. It has the longest bed available at 8 feet with the heftiest payload. Packing a standard 6.4-liter 410-horsepower Hemi V8, it can tow as much as 17,490 pounds. The 3500 is also the only Ram pickup that doesn't have a coil spring rear suspension. The five-link setup with coils in the 1500 and 2500 are abundantly strong for their respective segments, while providing superior ride and handling to boot, but when you enter 3500 territory, the old-fashioned leaf spring is still required (an auto-leveling rear air suspension that still utilizes the leaf springs is optional, but our truck was not so-equipped). Remember this when you're choosing between 2500 and 3500 trucks, because if you don't need the 3500's extra capability (more on that later), you're going to be suffering when the bed isn't loaded or the tongue isn't attached to something humongous. The ride is quite simply appalling, crashing over bumps and launching you from your seat into the shoulder belt. The 2500's is far superior. But of course, anyone who has ever driven a "1-ton" pickup would find such a comment charming. "No kidding," they'd likely say, "tell us something we don't know." Well, it probably wouldn't be that the ride settled down substantially when I loaded it with a relatively paltry amount of weight. The 500 pounds of mulch I dropped into the bed was quite obviously a light lift for a truck with a 4,660-pound payload, but I can't dump river rock into every truck I test. I also didn't have a 17,000-pound something around to tow. I hereby apologize. Yet, the point of this heaviest-duty regular-cab pickup was still made. If you owned a number of different vehicles or needed something to keep on a ranch for working purposes only, this is exactly the type of truck to keep on hand.

Recall: The Ram 1500's driveshaft could fall off

Ram is recalling 10,160 pickups built for the 2018 and 2019 model years, because the driveshaft may fall off. That would be bad. The recall involves the previous-generation truck. Specifically, some units of the normal 2018 Ram 1500 and some of the 2019 Ram 1500 Classic. In Ram-speak, "Classic" means the previous-generation truck that's sold alongside the all-new version for 2019. The trucks involved were built in a month-long time period in 2018, and Ram has identified the problematic driveshafts by part number. Apparently, the rear driveshaft may "have an incomplete weld fusion between the tube and tube yoke, which may lead to weld cracking or the driveshaft fracturing," according to the recall documents. This could cause the driveshaft to drop off the vehicle, and cause you to lose drive power (among other hazards involved with a driveshaft falling off a truck). At this point, FCA says it's not aware of any accidents or injuries related to the problem. However, it has seen eight occurrences of the driveshafts breaking, prompting this voluntary safety recall. Ram says that an extra noise or vibration could signal that the driveshaft is on the way out. FCA is going to start notifying owners about the recall in mid-June. When you take your truck in, the dealer will replace your driveshaft with one verified to have complete weld fusion. It will, of course, be free of charge to the owners of the affected vehicles.

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

Jeep and Ram diesel owners get $3,075 in lawsuit settlement

Owners of certain Ram 1500 and Jeep Grand Cherokees equipped with diesel engines will get up to $3,075 in compensation for repairs under a settlement of a class-action lawsuit against Fiat Chrysler over illegal emissions-cheating software. The roughly $800 million settlement was first announced in January and approved by a federal judge in California last week, according to Consumer Reports. The affected vehicles are 2014 to 2016 Ram 1500 pickup trucks and Jeep Grand Cherokee SUVs equipped with 3.0-liter EcoDiesel V6 engines. FCA will update the emissions control software, provide an extended warranty covering up to 10 years or 120,000 miles, and provide cash compensation. Eligible owners will get as much as $3,075, while eligible lessees, former lease holders and former owners will get up to $990, and partial owners will get up to $2,460. FCA has established an EcoDiesel Settlement website where affected owners can find more information on how to submit and track a claim and sign up for updates. Customers with questions can also call 833-280-4748. Vehicle owners will have 21 months to submit a claim, with a deadline of Feb. 3, 2021, and two years to complete the repair and receive compensation for it. Former owners and lease holders must submit claims by Aug. 1, 2019. The EPA in early 2017 issued a notice of violation to FCA after Jeep and Ram installed eight emissions control devices on diesel vehicles. FCA's settlement includes $311 million in total civil penalties to U.S. and California regulators, up to $280 million to resolve claims from diesel owners, $105 million in extended warranties, $72.5 million in state civil penalties and $33.5 million in payments to California for excess emissions and to resolve consumer claims. Auto supplier Robert Bosch GmbH, which provided emissions control software, is paying $27.5 million to resolve claims, plus $103.5 million to settle claims with 47 states. The federal court also approved consent decrees between FCA, the EPA and the California Air Resources Board, plus agreements with all 50 stats and the U.S. Customs and Border Protection. In a statement, FCA said, "The settlements contain no findings of wrongdoing, nor admission of any wrongdoing, by FCA US" and added that the software fixes will have no affect on average fuel economy, performance or other characteristics of the vehicles.

Ram wants its midsize truck situation 'fixed soon'

The rumors of a midsize Ram pickup are like a metronome — sometimes in motion, sometimes dead. This week the rumor is alive, so reports Automotive News. Fiat Chrysler CEO Mike Manley admitted during an earnings call that the lack of a mid-sizer is "a clear hole in our portfolio," and that the Ram product development team is "focused on it." Puzzling that out means finding "a cost-effective platform in a region where we can build it with low cost and it still being applicable in the market." But he wants a solution found soon. During the product roadmap presentation FCA made in June last year, late CEO Sergio Marchionne said the middling pickup would be built in Mexico. That tidbit came after years of Marchionne saying the brand would get in the segment, only to have the idea shot down by Ram bosses. At the 2012 Detroit Auto Show, a year after the midsize Dodge Dakota went off the market, Marchionne said the brand would reinstate a new-generation Dakota, with a better-than-50% chance it would be unibody. In 2013, then-Ram president Reid Bigland said the chances were tiny because the numbers didn't add up. The two men got on the same page, in favor of, in 2014. In March 2016, Marchionne said, "I like that space a lot," and "It's a good space to be in." Exactly one month later, then-Ram CEO Bog Hegbloom said the idea was dead because he couldn't make a business case for it. Come early 2018, even Marchionne had joined the naysayers. He told Automobile, "We did not think it was necessary to re-enter that market after our last experience." The snag was, and remains, that a smaller truck has "a cost structure very similar to our Ram 1500. We have not found an economic way to get this done." Four months later, there's a midsize pickup on the product roadmap. Then, at this year's New York Auto Show, Ram Trucks boss Jim Morrison told us Ram had no plans yet for a smaller pickup, although the division continues to look at its options. Last September an Automotive News report forecast the truck to be built in Toledo alongside the Jeep Wrangler and Gladiator pickup. When Car and Driver asked for clarification about Toledo or Mexico, FCA pointed to Marchionne's comments referring to Mexico. It appears that's the angle Manley and his team are still trying to make work. The Saltillo, Mexico, assembly plant now builds Ram's heavy-duty trucks, but observers expect HD production to move to the U.S. to make room for the smaller pickup.

Maxwell RHEV Prototype First Drive Review | More than meets the eye

The Maxwell RHEV looks just like any small business' panel van, sporting large vinyl graphics and unassuming steel wheels. You'd have no idea that the co-founders of the startup based out of Seattle had grafted a salvaged Voltec powertrain from a junkyard Chevy Volt into this Ram ProMaster. Somewhere, a battery pack lurks. Maxwell's co-founders, CEO Max Pfeiffer and engineer Trey Camp, open the cargo area to reveal a completely unaltered space. Both are ex-Tesla employees with a long fascination for the #vanlife movement – that their interests intersected in a hybrid cargo van isn't surprising once you start talking to them. This is their first vehicle, a salvaged ProMaster sidelined with a blown 3.6-liter Pentastar, and it's both their prototype and the only Maxwell in existence right now. That said, the company is building a low-roof version for a customer, which will be lighter, have less aero drag and therefore be more efficient. The company is just emerging from a stealth startup mode, and while their backstory is fascinating, I'm still wondering where the Volt's 18.4 kWh battery pack is. "There's nothing in the back ... we're able to get the battery underneath the floor, in the center," Pfeiffer says. Ducking my head under the side reveals, sure enough, a little underside blister that contains the battery, tucked up neatly. The other changes to the RHEV – short for Range-extended Hybrid Electric Vehicle – are minimal. He pops the hood. There are some rough edges, but the 1.5-liter, 101-horsepower engine and 48-kW motor fit comfortably on custom engine mounts and with re-routed exhaust, behind a fascia that improves aero and houses the charge port. Custom axles send power to unaltered Ram hubs and brakes. "This version, it's a little bit prototype-y," Pfeiffer says. "We've had more time to work with the CAD [computer-aided design, engineering drawings] we were able to get from GM and Chrysler, and we've done a better job packaging for production." GM already spent billions on the Voltec and its controlling software, and Maxwell can happily ride those coattails. Despite the help GM has lent Maxwell, there are no official ties. An emulator sends spoofed signals to the Ram instruments, which have a new custom-printed face. The Ram's body control module is left alone. For powertrain faults, Maxwell says the vehicle can theoretically be serviced by any Chevy dealer, and any issue with the rest of the vehicle can be handled by a Ram service shop.

Fiat Chrysler picks Google, Samsung for global connected car system

DETROIT — Fiat Chrysler said on Tuesday it will use technology from Alphabet Inc's Google and Samsung to connect all its vehicles by 2022, providing music and video and facilitating future car-sharing and self-driving capabilities. Fiat Chrysler Automobiles NV (FCA) will use Google's Android operating system globally instead of a mixture of software that varies by region, a spokesman said. The automaker will also use a cloud-based digital platform from Samsung Electronics Co Ltd's Harman unit. Unlike its rivals General Motors and Ford, FCA has spent virtually nothing on developing self-driving vehicle technology. This saves the company large amounts of money, but makes it reliant on outside parties to provide technology and systems. FCA said it will launch the new capabilities in the second half of 2019. The company said the system will aid owners "by predicting maintenance needs, locating fuel and charging stations, receiving traffic prompts and restaurant offers and providing live customer-care assistance at the push of the button." Chrysler Dodge Fiat Jeep RAM Technology Emerging Technologies connected car

Ram 1500 EcoDiesel is coming soon, but a midsize Ram, not right now

NEW YORK — At this year's New York Auto Show, we had the opportunity to talk with the head of Ram Trucks, Jim Morrison, and he had a few interesting tidbits about what's coming and what isn't for the brand. The first big news is that the 3.0-liter turbocharged V6 diesel is finally coming to the all-new Ram 1500 later this year. Up until now, the engine was only available in the previous-generation Ram 1500 and current Ram 1500 Classic. The new Ram 1500 EcoDiesel won't have the same engine, though. It will be a redesigned 3.0-liter turbodiesel that will also appear in the Jeep Gladiator in 2020. That means it should also make 260 horsepower and 442 pound-feet of torque, unless the Ram gets unique tuning that changes the output. Morrison wouldn't elaborate on any other details, though, including whether it would utilize the eTorque mild-hybrid assist of its gas powered cousins. The other news concerns things we probably won't see from Ram anytime soon — and one of them is a midsize pickup truck. Morrison said there are no plans for one yet, though the company is always considering options. In the meantime, the current strategy is to offer the Ram 1500 Classic as an option to potential midsize buyers. The thinking, of course, is that the Ram 1500 Classic is cheaper than the redesigned Ram 1500, and it's a bigger truck than midsizers. We can't help but wonder if the Gladiator might also make a midsize Ram a tougher sell at the moment. Finally, Morrison still had nothing to say about a regular cab offering for the redesigned Ram 1500. The only full-size Ram 1500 offering with a regular cab is the Classic model, leaving four-door models only on the normal 1500. We know that regular cabs don't sell well, so it's understandable that there isn't an offering yet, but it seems the company will have to offer one eventually when the Classic runs its course. Odds are that a future Ram 1500 regular cab will look something like the Ram 2500 and 3500 regular cab models, but with a more subdued grille.