2dr Coupe Gts New Manual Gasoline 3.4l Flat 6 Cyl Rhodium Silver Metallic on 2040-cars

Auto blog

Porsche to replace chassis components in 918 Spyders

The entire production run of the Porsche 918 Spyder is completely sold out, but 205 of them need to make a trip to the dealer for a repair estimated to take about two days. According to Porsche, it found quality problems with unspecified "chassis components" on the hybrid supercar and has instituted a plan to fix them as a precautionary measure. There were no reported breakages of these parts or complaints from customers. The German automaker already contacted all of the affected owners directly to have the 918s repaired in 2015. When reached for comment, Porsche Director of Corporate Communications Achim Schneider told Autoblog via email that "due to the supplier relationship we did not announce further details regarding the components so far." He also said that 43 vehicles are affected in North America, which includes the US and Canada. The 918 Spyder was affected by a small recall in the US earlier this year when Porsche found that the rear-axle control arms could potentially break. The campaign covered only five cars, though. Porsche replaces chassis components in 205 vehicles worldwide Atlanta. As a precautionary measure, Porsche will replace chassis components in 205 vehicles of the 918 Spyder model worldwide. The reason for this is that for vehicles that were manufactured in a certain time period defective parts were used from a delivery batch, whose functionality cannot be permanently guaranteed. No complaints have been made known (such as a break of a component) from customers up till now. The problem was identified during in-house quality inspections and remedied immediately. The owners of the vehicles, which could be exactly traced, were contacted directly by their competent Porsche representatives. The workshop visit, which will take place by appointment at the onset of 2015, takes about two days to complete at no charge. Featured Gallery 2015 Porsche 918 Spyder: First Drive View 51 Photos News Source: PorscheImage Credit: Copyright 2014 Michael Harley / AOL, Porsche Green Recalls Porsche Hybrid Supercars porsche 918 spyder porsche 918

Porsche (finally) unleashes full, official details on 918 Spyder

Porsche has finally let released all of the details on the 918 Spyder, the German brand's challenger to the McLaren P1 and Ferrari LaFerrari, after months of leading our poor, performance-loving hearts on. The covers were lifted at the Volkswagen Group night, an enormous precursor to the Frankfurt Motor Show, and include a massive, 11,000-word press release that's attached at the bottom of this page.
The 918 Spyder features a mid-mounted, dry-sump-lubricated, 4.6-liter V8 engine that generates 608 horsepower when left to its own devices. Combined with a trio of electric motors, which produce 286 hp, the total system horsepower for the 918 Spyder rests at 887 ponies. That's less than the McLaren P1 (903 hp) and the LaFerrari (949 hp), but the Porsche is also likely to be a bit cheaper, starting at $845,000, while the McLaren will be in the seven-figure range for certain, and it will more than likely be joined by the LaFezza.
The 918 Spyder counters with a 2.8-second jog to 62, a 7.7-second run to 124 and it will hit 186 in 22 seconds.

More details on Lanzante's F1-engined Porsche 930 restomod

Not long after last year's Porsche Rennsport Reunion, we posted on Lanzante Engineering's restomod project with the original Porsche 911 Turbo. McLaren Formula One used TAG-branded Porsche engines for four years in the 1980s to win two constructor's and three driver's championships. McLaren sold 11 of those engines to Lanzante — nine of which have been raced, one with a win to its credit — and Lanzante is installing them into the original chassis of some 930s. PistonHeads stopped by the shop to find out more. By the end of its service in the MP4/3, the TAG-Porsche TTE P01 motor rang up 1,060 horsepower in qualifying and 960 hp in the race, revving to a 12,600-rpm redline. Porsche engine legend Hans Mezger had led the development, coaxing those numbers from just 1.5-liters of V6 aided by two large KKK turbos at a max of four bar. All that was fine for a time when F1 ran with unlimited testing and unlimited parts, but a modern owner doesn't want to pay five techs to live in his garage and keep his car running. Lanzante asked Cosworth to make the engine more drivable and reliable. Cosworth installed a new crankcase, adjusted the air-fuel mixture, and installed smaller turbos for quicker power delivery, decreasing max boost by 25 percent to three bar (43 psi). The redline has come down to 9,000 rpm, for final output figures of 503 hp and 310 pound-feet of torque. According to PistonHeads, power climbs a "steady incline to redline," and more than half the rev band delivers maximum torque. The 503-hp rating doesn't sound like much today, when a Mustang gets more than 700 hp. Yet the first 930 Turbos got 296 hp and 243 lb-ft from a 3.0-liter flat-six with one big KKK turbo. The most powerful 930 Flatnose worked up 330 hp and 347 lb-ft from a 3.3-liter flat-six. Lanzante's taken out a ton of weight, though. The TAG engine is already 220 pounds lighter than the 930's 3.3-liter; a new carbon fiber hood and engine cover, and aluminum door skins shed more pounds. The total package weighs roughly 2,430 pounds, which is more than 500 pounds lighter than the original Porsche Turbo. That includes the extra pieces needed to make an F1 engine power a passenger car. Lanzante had to swap in a 930 Flatnose front bumper, which replaces the fog lights for oil coolers. The team put radiators at the front of the car as part of a brand new water cooling system. The climate control is entirely electric, because F1 cars didn't come with HVAC.