1987 Porsche 944 Base Coupe Red 2-door 2.5l Manual Fun To Drive on 2040-cars

Auto blog

All Porsche 911s to get turbos in 2015?

Currently, Porsche builds two turbocharged 911s - the Turbo and the Turbo S (and their cabriolet counterparts). The rest of the 911 range, meanwhile, is motivated by either 3.4- or 3.8-liter flat-sixes of varying outputs. This clear separation could be set to change in the very near future, though, as rumors continue to swirl that Porsche's rear-engined range could switch exclusively to turbocharged power.
This time, it's Car projecting that the 911 range will go turbocharged as part of a mid-cycle refresh, with the base Carrera's 3.4-liter dropping to 2.9 liters and adding an iron lung, bumping the entry level 911 up to 400 horsepower. Yes, a 400-horsepower, entry level 911. The Carrera S, meanwhile, will retain its 3.8-liter engine, but will also benefit from turbocharging, increasing output to 530 horsepower and 520 pound-feet of torque. So basically, it sounds like the current, 520-hp 911 Turbo will become the next Carrera S.
What does that mean for Porsche's traditional high-performance models? Well, it's a safe bet that the Turbo, Turbo S and eventual GT2 will be producing seriously huge power figures. Based on pure speculation, we wouldn't be shocked to see a 600-hp Turbo, with the S and GT2 increasing output markedly from there.

Porsche wants you to 3D print your own Cayman

Have you got access to a 3D printer? Well lucky you, because as we're rapidly learning, the possibilities are virtually endless. And if your tastes lean towards the automotive (as we'd assume they do if you're reading this page), we've got good news.
Porsche has just released 3D printing data for the Cayman S so you can three-dimensionally print out your own and customize to your heart's content. Now Porsche hasn't specified just to what scale the data will allow you to print your Cayman, but we have a feeling that'd mostly be limited by the size of the printer at your disposal. Check it out in the video below and follow the link to the Porsche site to download the file.

Porsche bringing Macan S Diesel to US instead of 4-cylinder [w/poll]

When Porsche unveiled the new Macan at the LA Auto Show, it announced two powerplants for the US market, both of them twin-turbo V6s: the Macan S equipped with 340 horsepower from its 3.0-liter engine, and the Macan Turbo with 400 horses from 3.6 liters. But those aren't the only engines Porsche will offer in its new compact crossover. Porsche is also offering the Macan S Diesel overseas with 258 hp, and reports have since indicated that a pair of four-cylinder models on their way: a 2.0-liter turbo four with 280 hp and four-pot turbodiesel of the same capacity with an as-yet undisclosed output.
Now Car and Driver is reporting that while those four-cylinder engines won't be making the transatlantic voyage to our shores, Porsche will offer the aforementioned Macan S Diesel in North America beginning in early 2015, nearly a year after the gas V6 versions arrive.
The 3.0-liter turbodiesel V6 is based on the same engine found in the Cayenne Diesel and the Audi Q5 TDI on which the Macan is based. Of course, its 248 hp is substantially less than the 340 ponies in the Macan S, but its 413 pound-feet of torque outshines not only the 339 lb-ft in the Macan S but also the 406 lb-ft in the Macan Turbo. Acceleration times, however, suggest the Macan S Diesel is still slower, with a 6.3-second run to 62 mph than neither the Macan S (5.4 sec) or Macan Turbo (4.8). The good news is that the Macan S Diesel is tipped to undercut the price of both, dropping the oil-burning crossover's MSRP below that of the $49,900 starting price for the Macan S and the $49,600 for the base Cayenne. If that C/D prediction comes to pass, that will make it the Macan S Diesel most affordable Porsche sold.