2019 Porsche 911 Turbo on 2040-cars

Auto blog

More details on Lanzante's F1-engined Porsche 930 restomod

Not long after last year's Porsche Rennsport Reunion, we posted on Lanzante Engineering's restomod project with the original Porsche 911 Turbo. McLaren Formula One used TAG-branded Porsche engines for four years in the 1980s to win two constructor's and three driver's championships. McLaren sold 11 of those engines to Lanzante — nine of which have been raced, one with a win to its credit — and Lanzante is installing them into the original chassis of some 930s. PistonHeads stopped by the shop to find out more. By the end of its service in the MP4/3, the TAG-Porsche TTE P01 motor rang up 1,060 horsepower in qualifying and 960 hp in the race, revving to a 12,600-rpm redline. Porsche engine legend Hans Mezger had led the development, coaxing those numbers from just 1.5-liters of V6 aided by two large KKK turbos at a max of four bar. All that was fine for a time when F1 ran with unlimited testing and unlimited parts, but a modern owner doesn't want to pay five techs to live in his garage and keep his car running. Lanzante asked Cosworth to make the engine more drivable and reliable. Cosworth installed a new crankcase, adjusted the air-fuel mixture, and installed smaller turbos for quicker power delivery, decreasing max boost by 25 percent to three bar (43 psi). The redline has come down to 9,000 rpm, for final output figures of 503 hp and 310 pound-feet of torque. According to PistonHeads, power climbs a "steady incline to redline," and more than half the rev band delivers maximum torque. The 503-hp rating doesn't sound like much today, when a Mustang gets more than 700 hp. Yet the first 930 Turbos got 296 hp and 243 lb-ft from a 3.0-liter flat-six with one big KKK turbo. The most powerful 930 Flatnose worked up 330 hp and 347 lb-ft from a 3.3-liter flat-six. Lanzante's taken out a ton of weight, though. The TAG engine is already 220 pounds lighter than the 930's 3.3-liter; a new carbon fiber hood and engine cover, and aluminum door skins shed more pounds. The total package weighs roughly 2,430 pounds, which is more than 500 pounds lighter than the original Porsche Turbo. That includes the extra pieces needed to make an F1 engine power a passenger car. Lanzante had to swap in a 930 Flatnose front bumper, which replaces the fog lights for oil coolers. The team put radiators at the front of the car as part of a brand new water cooling system. The climate control is entirely electric, because F1 cars didn't come with HVAC.

Watch the incredibly complicated operation of Porsche's new targa roof

Despite Porsche having claimed the name, targa tops are nothing new. In addition to the semi-roofless version of the 911, plenty of cars in the past have used removable roof panels - the new Corvette Stingray has one (as have prior generations), and this type of open-air experience has been available on past vehicles like the Pontiac Solstice Coupe and Honda Civic del Sol.
But when Porsche took the top off its brand new 911 Targa here at the Detroit Auto Show, it was indeed cause for pause. Simply put, this is one of the most complicated and intricate electronic roof panel removal techniques we've ever seen, save perhaps, for the setup found on the Japanese-market Civic del Sol from the 1990s.
We won't spoil the video for you, but basically, rather than just the roof panel coming off, the entire rear glass area lifts away the body in order for the small section over the passenger compartment to slide back. This has to be incredibly expensive to repair once it inevitably breaks. And we highly doubt you'll be able to operate this mechanism at any speed.

Porsche resurrects V8-powered 911 prototype from the Eighties

These days, we take it for granted that the Porsche 911 uses a flat-six engine. That's because every version of the iconic rear-engined sports car has had one. Right? Well, for the most part. There was the 912 that joined the original in the late Sixties with a flat-four. And in the mid-Eighties, Porsche toyed around with the idea of a V8-powered 911.
After the first-generation 911 had been in production for over two decades, Porsche began development of its successor, the 964, in the 1980s. And one of its ideas was to use a V8 engine. So it took a 964, borrowed a V8 from Audi, gave it the rear bodywork from a 959 and dubbed it the 965.
The idea was to create a more affordable successor to the 959 that included its advanced all-wheel drive system and active suspension. The Audi V8 would have been replaced with one of Porsche's own design - possibly based on the it had built for Indy racing - but Dr. Ulrich Bez (who was then head of Porsche R&D long before taking the reins at Aston Martin) ultimately killed the project.