65 Gto Convertible Fresh Restoration Show Board Phs Docs 389 4v And 4 Speed on 2040-cars

Auto blog

Why Pontiac should come back and how it can be relevant again

When I was a kid growing up in Metro Detroit, our family was always entwined in the General Motors empire. My dad and some of our relatives worked for GM in various capacities, and we had our fair share of Chevrolet, GMC, and even Buick products in our humble driveway. However, it was my Uncle Ed that always had a vehicle from the one GM brand that always appealed to me the most: Pontiac. Seeing him pull up in his Pontiac 6000 and later the '90s era Grand Prix sedan that replaced it was always an exciting occasion, and both of these models also reflected the playful spirit that once defined the Pontiac brand. Back when Pontiac first got its performance groove on in the '60s, names such as GTO, Firebird, as well as Bonneville became iconic nameplates in the broader muscle car era. The '80s saw Pontiac lose some of its styling heritage, but also try new things at the same time including turbocharging as well as the mid-engine sports car with the flawed but still sleek Pontiac Fiero. When the Pontiac brand was shuttered in 2009, it was a mere few years after I earned my drivers license, and also when Pontiac was just beginning to regain some of its lost luster. Granted cookie cutter efforts like the Pontiac G3, (Chevrolet Aveo) G5, (Chevrolet Cobalt) and G6 (Chevrolet Malibu) certainly did not help matters during Pontiac's final years on the market, but two models in particular offered a compelling glimpse into what could've been for the storied brand. The first was the Pontiac Solstice roadster/coupe. Originally introduced as a concept back in 2004, and championed by everyone's fighter jet flying auto executive Bob Lutz, the Solstice was designed to be a serious competitor to the Mazda Miata, and while its interior ergonomics were flawed and the top solution not ideal. It proved to be a fun little car to drive, and also a sales success for Pontiac with initial demand exceeding expectations.This was especially due to its lineup of engines with the 2.0 liter LHU turbocharged four-cylinder engine delivering 260 horsepower in GXP variants. The second and (inarguably my favorite Pontiac model) was the Pontiac G8 sedan. Originating in Australia as the Holden Commodore VE, the G8 was designed to rectify the multitude of sins created by the last generation Bonneville. Front wheel drive was pitched in favor of rear wheel drive, and for the first time in a long time interior ergonomics and cladding free exterior styling were key building blocks for success.

Porsche Syberia RS rally car is what you make when you need a Hummer that's fast

Some history: The Porsche 911's first-ever race was the 1965 Monte Carlo rally, entered because Porsche's PR man at the time wanted to show how much the future icon could do. A year later, Porsche began selling an optional rally kit for the 911 that included Recaro seats, a roll bar, and adjustable Koni dampers. Porsche produced factory rally racers until the early 1970s, winning Monte Carlo three times in a row before letting privateers carry the torch so the factory could focus on campaigning in the East Africa Safari. After years of painful lessons, when Porsche took its brand-new 1978 911 SC to the safari, the 3.0-liter flat-six coupe was hours away from winning the race before damaging the suspension, demoting the car to second place. Porsche fans wanted their own replicas, and finding the new 911 to be an affordable option, the SC — built from 1978 to 1983 — went from denoting "Super Carrera" to "Safari Car."   Porsche took a big step up in with the 953 rally car. Built to win the 1984 Paris-Dakar, which it did, the 953 introduced the four-wheel-drive system Porsche would evolve for the 959 in 1985 and the 964-series 911 in 1989, as well as the now-unforgettable 911-based Rothmans livery. All of this is what's fueling today's 911 Safari Car revival around the world. Almost all of today's builds start with the so-called G Model 911s, produced from 1973 to 1989, usually focusing on the SC and the Carrera that ran from 1984 until 1989.  Fast forward to 2007 when a mysterious crew organized the TransSyberia Rally, a "sports-touring" event that stretched 4,500 miles from Moscow to the capital of Mongolia, Ulaanbaatar. Of the 34 vehicles that entered, 25 were Porsche's purpose-built Cayenne S Transsyberia Edition.  Put this all in a pot and you have the beginnings of the car that brings us here, the Syberia RS. It's said that a German fellow by the name of Kai Burkhard wanted to buy a Humvee, but the low top speed, around 50 miles per hour, put him off. So instead, he imported a 1986 911 "in collector condition" from Japan with the idea of rebuilding it to provide almost all the off-road fun he could have had in the H1. Burkhard tapped the Tailor Made department at German suspension designer H&R, and the two set to work creating a build like the 953 Dakar winner.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The owner's been mum on most of the details including engine revisions.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...