2010 Armada Se Used 5.6l V8 32v Automatic 4wd Suv Premium Bose on 2040-cars

Auto blog

Nissan Pathfinder, Infiniti JX in transmission safety probe

Nissan may be forced to recall 110,000 Pathfinder and Infiniti JX35 crossovers, due to a number of customer complaints. Consumers report suddenly losing power, with repair facilities blaming the issue on faulty transmission cooler line connections. Both the Pathfinder and JX35 use a continuously variable transmission. As of right now, the only vehicles being investigated are from model year 2013.
Nissan has been cooperating with the National Highway Traffic Safety Administration, according to a report from Reuters, and it has developed a fix for the affected vehicles. It's not clear whether this will develop into a full-blown recall, as there have been no known cases of injuries or crashes. But with a potential 110,000 vehicles prone to sudden power loss, a recall seems to be a likely outcome.

About 20k Nissan Pathfinder, Infiniti JX models recalled for potentially faulty brakes

The National Highway Traffic Safety Administration has issued a recall for the 2013 Nissan Pathfinder and 2013 Infiniti JX due to a problem with the front brakes. The problem is a result of the brake torque member (a part that attaches the brake caliper to the front suspension), which was cast improperly with a structural weakness that could possibly lead to "reduced braking, increasing the risk of a crash," according to NHTSA. How, you ask? If the part breaks, the brake caliper could move position and possibly make contact with the wheel.
Around 20,000 of these sister crossovers are being recalled, but it doesn't sound like all were equipped with the faulty component. Dealers will inspect vehicles built between December 3, 2012 and January 29, 2013, and replace components from the defective batch. The recall goes into effect next month, but until then, the official recall notice is posted below with information for how owners can contact Nissan.

Can a car be lifted using rubber bands?

It's quite amazing what it takes to lift a car. We already know the feat can be accomplished using just a pair of phone books, but what about rubber bands? To the Internet! A video series appropriately titled "Will It Lift" attempted to find out by using a massive crane and a Nissan Micra weighing less than 1,800 pounds.
Doing a little math, the trio determined that it would take 180 rubber bands to support the car. A metal bar was placed through the window openings and another was place atop the car, and then attached together using the rubber bands and hooked to the crane. Now these aren't any special rubber bands or anything. They're just eight-millimeters thick, but the stunt is testing the rubber bands' power in numbers.
We're not going to spoil it for you, so scroll down to check out the video of the stunt.