2013 Sunroof Leather Bluetooth 16" Alloy Wheels Aux/usb No Accidents Certified on 2040-cars

Auto blog

Mini Cooper SE Prototype First Drive Review | This electric hatch is a suburban belter

MUNICH, Germany — A battery-electric Mini SE? Haven't we been here before? Well, yes: A decade ago, as part of its "i Project," BMW conducted a worldwide field trial of some 750 lithium-ion battery equipped two-door Mini Coopers. It was launched at the 2008 L.A. Show, and the lithium-ion battery pack took up most of the space normally occupied by the rear seats. Nevertheless, interest in the 450 lease vehicles offered in the U.S. (at $850 a month) was strong, with more demand than cars available. One result of the 2008-2011 trial was parent company BMW learned that the average owner of a two-door Mini drives about 25 miles a day, and the company is hoping the battery Mini will be an ideal (sub)urban-run-around for two- or three-car families. Now BMW is about to launch a production Mini EV (based on the two-door model, but with the full complement of four seats), which goes on sale at the end of the year. This will join the Mini Countryman All4 plug-in hybrid in the electrified Mini stable, but while the Countryman has an EV range of about 12 miles, this battery Mini will travel around 120 miles on a single charge. The reason we can't be too definite about the new Mini's capabilities is that BMW isn't allowed to "advertise" the car this far in front of its on-sale date. We caught up with the prototype model, mummified in camouflage tape, at an off-the-road driving event held at BMW's Munich driving center on the former military air base of Furstenfeldbruck, now known as Maisach. The drivetrain is based on the middle model of BMW's i3 range, the i3S, with its 135 kilowatt/181 horsepower motor and 94 amp-hour, 33 kilowatt hour battery. The battery is a 96-cell lithium-ion unit from Chinese supplier CATL instead of BMW's previous supplier, Samsung, and it weights 441 pounds. Unlike the team-built, mainly carbon-fiber i3, the Mini is a standard three-door model that runs down the production line in Oxford, with a metal subframe that houses the electric motor, inverter, transformers, and control electronics so they can be slotted into place like a conventional driveline. We can extrapolate a few things about the Mini from the BMW i3S. As well as its working range of 120 miles, the i3S has a top speed of 100 mph and will accelerate from 0-62 mph in 7.7 seconds. With over 360 pounds more to pull about, the 2,998-pound Mini EV will be slower, with less range, especially if used in cold conditions.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Next-gen Mini could sire 10 different models including PHEV

The first generation of the reimagined, BMW-backed Mini was a simple things, confined to two body styles - hatchback and four-seat convertible. It wasn't until the second-generation platform came along that Mini began truly expanding, offering a long-wheelbase model, a roadster, a coupe, a five-door crossover, and a three-door, um, thing?
BMW is aiming for 10 to 12 different vehicles from just two brands off one platform.
According to an interview between Automotive News Europe and the BMW board member that oversees Mini, Peter Schwarzenbauer, the funky British brand will be expanding far beyond the seven body styles it currently offers. "With the new ULK architecture, we currently have in mind eight to 10 models," Schwarzenbauer told ANE. That architecture he mentions, will also underpin the BMW 1 Series GT and the BMW X1, meaning that BMW is aiming for 10 to 12 different vehicles from just two brands off one platform (and that's only what we know about).