Mazda Other, page #6

Auto blog

Oliver Jarvis in a Mazda takes pole in star-studded Rolex 24 at Daytona

DAYTONA BEACH, Fla. — Oliver Jarvis broke a 26-year-old record at Daytona International Speedway in putting the Mazda DPi from Team Joest on the pole for the Rolex 24 at Daytona. Jarvis went to the top of the scoring chart early in Thursday's qualifying session with a lap at 1 minute, 33.685 seconds. It broke the mark by two-tenths of a second set by P.J. Jones in 1993 in a GTP-class Toyota. The Englishman spoiled a strong run by Team Penske, which qualified second and third for the twice-round-the-clock endurance race that begins Saturday. Ricky Taylor earned the second spot in Penske's Acura ARX-05, while teammate Juan Pablo Montoya was third in his first time qualifying the sports car for the organization. Team Joest wound up first and fourth on the starting grid with Jonathan Bomarito putting its second car on the second row. Felipe Nasr had the fastest Cadillac DPi-V.R in fifth for Action Express Racing. Nasr is the reigning IMSA champion and led the way for four more Cadillacs in qualifying. Jordan Taylor was sixth for Wayne Taylor Racing, ahead of Juncos Racing's Agustin Canapino, then Tristan Vautier and Stephen Simpson for JDC-Miller Motorsports. James Allen in an Oreca 07 Gibson for DragonSpeed won the LMP2 pole. In the GT Le Mans class, Nick Tandy put a Porsche on the pole as four different manufacturers qualified in the first two rows. IMSA GTLM champion Jan Magnussen of Corvette Racing was second, Ryan Briscoe in a Ford GT for Chip Ganassi Racing was third and followed by Davide Rigon in Risi Competizione's Ferrari 488. Marcos Gomes gave Via Italia's Ferrari 488 the pole in the GT Daytona class. Related Video:

2019 Mazda3 pricing starts at over $20,000, 2.5-liter engine standard

Pricing for the 2019 Mazda3 hatchback and sedan has been announced, and the base price has gone up by about $3,000. The new cheapest model is a front-drive, automatic Mazda3 sedan, and it starts at $21,895. The base Mazda3 now has the 186-horsepower 2.5-liter 4-cylinder as the standard engine, whereas the old model came with a 155-horsepower 2.0-liter engine and manual transmission as standard. Compared like-to-like, a 2018 Mazda3 in a similar spec would be slightly more expensive ($22,035) than the 2019 model. Opting for the hatchback on the base trim adds an additional level of equipment, with 18-inch wheels instead of 16-inch ones, Apple CarPlay and Android Auto, dual automatic climate control, leather wrapped steering wheel and shift knob. It also gets more safety equipment including blind-spot monitoring, automatic emergency braking, radar cruise control, automatic high-beams, automatic wipers and lane-departure warning with lane-keep assist. That all adds up to a $2,600 price increase over a base sedan. These features are available on the sedan for an extra $1,600 in the form of the Select package. For all other trims, opting for the hatchback adds $1,000. Higher trim levels add features such as better sound systems, real leather, a sunroof, heads-up display and power heated seats. In addition to pricing, Mazda revealed drivetrain options for the Mazda3, and they're not great for fans of manual transmissions. The Mazda3 hatchback with front-wheel drive and Premium trim is the only manual offering, and it starts at $28,395. On the upside, at least Mazda isn't relegating manual transmissions to the stripped out versions, but on the downside, there isn't a cheap manual option for those on a budget. And of course, if you want the sedan or all-wheel drive, the six-speed automatic is your only choice. Mazda has told us that it could match a manual with all-wheel drive, but clearly it doesn't see a market for that in the U.S. But like with the addition of the turbocharged Mazda6 and CX-5, if there's demand, such a combination could become available, but keep in mind the odds will still be slim. You can see the full breakdown of trims and prices below. The 2019 Mazda3 will be available in March.

2019 Mazda MX-5 Miata 30th Anniversary Edition coming to Chicago

While most people in the auto industry are fixated on the Detroit Auto Show just around the corner, Mazda is getting ready for the Chicago show next month. The company will celebrate the anniversary of the reveal of the original Miata there with a 2019 Mazda MX-5 Miata 30th Anniversary Edition. Mazda released a single teaser image of the car, and it took us a minute to realize it really was a photo of a car. Looking closely, you'll be able to make out the roofline of a Miata RF in bright red. It also appears to have some gunmetal metallic wheels. Based on those details, the car sounds similar to the 25th Anniversary Edition Miata. That model featured a special white leather interior and a matching Tourneau watch. Mazda seems to like giving out watches with its anniversary Miatas, having provided Seiko watches with the 10th Anniversary cars. Those were painted in a special blue with a matching blue top and blue and black leather interior. We're sure to have all the details on the new anniversary model's special features closer to the car's debut in February. Related Video:

2019 Mazda3 shows off factory bodykit, Miata gets a hardtop at Tokyo Auto Salon

The 2019 Mazda3 wasn't exactly lacking in the sporty style department when it was shown last month in L.A. But everyone, including Mazda, knows that doesn't mean it can't be even sportier. As such, the company is showing off a version of the new compact hatchback at Tokyo Auto Salon, a modified car and aftermarket parts show, with a body kit. It's a subtle one, consisting of a black front lip spoiler, black side skirts, and a longer, slightly upturned rear spoiler. Its low-key design fits in well with the Mazda3's taut, clean lines, and it makes the car look lower and more purposeful. The Mazda3 isn't the only car getting some love at the Tokyo Auto Salon. The company will display an MX-5 Miata with a removable hardtop made of carbon fiber. Now, you may remember that Mazda does offer a hardtop, but just for racing drivers. That top is a bit odd looking with a really high rear-end to clear motorsports-spec roll bars and cages. This top follows the lines of the roadster's soft top, looking much more sleek. Neither sets of parts here have been announced for production, but we wouldn't be surprised to see them show up as Mazda accessories. The Mazda3 body kit in particular seems a shoe-in, since the previous generation Mazda3 had a very similar appearance package available. The Miata top certainly seems as though it was designed with regular consumers in mind. Its future is less certain, though. For one thing, Mazda can point to the Miata RF if you want a solid roof. Then again, Mazda still offered a removable hardtop for conventional Miata roadsters even after the original power-retractable hardtop model was introduced. If it does come to market, though, expect it to be made from more affordable fiberglass and be painted in factory colors. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Mazda MX-5 Miata Drivers' Notes Review | A little power goes to our heads

The Mazda MX-5 Miata is nearly 30 years old. The current car — dubbed the ND — is in its fourth iteration and packs a number of updates for 2019, most notably a bump of 26 horsepower and 3 pound-feet over the 2018 model. The car now makes 181 horsepower at 7,000 rpm while redline has been raised to 7,500. That might not sound like a lot, but when you're moving fewer than 2,400 pounds of steel, aluminum and plastic, it feels plenty strong. Our test car was a Soul Red roadster with a brown top, an odd but striking combination. A power-retractable top is available as the Miata RF. This top-tier Grand Touring trim comes with features like automatic climate control, heated seats and leather seats. It might not be the most practical or versatile car on the road, but it might just be the most fun for the money. Senior Editor, Green, John Beltz Snyder: I was excited when I woke up to the Miata covered in snow in my driveway. After all, this tester came equipped with Bridgestone Blizzak winter tires. By the time I could pry myself away from my work and take the car for a spin, though, the snow had mostly melted. I still had fun flinging this around on the cold, wet roads. The first thing I noticed was actually what I didn't notice ... I wasn't wishing for just a little more power, for once. Chalk it up to the conditions, or to the extra 26 horsepower Mazda added for 2019, but this felt appropriately potent. If anything, it's just enough to help get the rear end to wiggle a bit and the tires to more readily chirp in second gear. The Miata, fresh from the factory, has learned to do the cha-cha. Oddly enough, though, my wife, who has been salivating over this generation of MX-5 since the first time I brought one home, has cooled on it a little bit. We went out on a date night, and she was hyper aware of the noise and bumps, and I was, too, frankly. Something about bundling up under an icy soft top can kill the mood of this convertible. In the summer, the sound of the engine and telegraphic feel of the road beneath you blend with the warmth of the sun and the tug of the wind in automotive harmony. It's still fun to drive in the cold, but it doesn't quite turn on the charm like it normally does. Associate Editor Reese Counts: I've spent a lot of time behind the wheel of various NDs over the past few years. The weekend I got married, my wife and I drove a Soul Red roadster from Los Angeles to San Francisco for a brief honeymoon.

Mazda boss says no to new-generation Mazda3 hot hatch

Mazda offered a hot, turbocharged version of the Mazda3 model during the car's first two generations, badging it either the MPS or the Mazdaspeed 3 depending on the market. The third generation car didn't get a hot-hatch variant, and now Mazda is saying there won't be one for the freshly revealed fourth-gen car, either. Mazda's new global boss, Akira Marumoto, told Australian motor journalists at the Los Angeles show that there won't be an MPS in the cards. As Drive quotes Marumoto: "Mazda is a small player, and if [you are asking whether] that segment has a high particular priority for Mazda, my answer would be no. Therefore we not planning for MPS in the future." Marumoto stated that Mazda would rather establish itself as a genuine premium carmaker comparable to its European rivals, stressing that this would be achievable through quality, comfort and refinement improvements in the existing lineup rather than expanding into other segments. As well as nixing the Mazda3 MPS, Marumoto also said that despite repeated queries, the function of the 2015 Tokyo Motor Show car RX Vision was to preview the evolution of the Kodo design language and not to herald the arrival of a new rotary sportscar. So, it's time to cue the Mazda Kills Rotary Sports Car Again headlines. Marumoto also told journalists that there won't be an EV sports car or a completely driverless car from Mazda either: He said he prefers the smell of gasoline to full electric power, and that Mazda will never build a car without a steering wheel. For Mazda, autonomous capabilities would serve to bring the car to a safe halt in the case of an incapacitated driver, instead of doing the driving. However — and there is a strong "however" — Mazda did tell us that the turbocharged 2.5-liter engine does fit into the new 3. Mazda representatives said that the header on the naturally aspirated version is big enough as it is, making it easy to shoehorn in the 250-horsepower turbo version without issue. They also said that the company is closely monitoring buyer demand, which originally led to the turbo being available on the Mazda6 and CX-5, along with justifying the introduction of all-wheel-drive in the new Mazda3. So: if there is a case for it, the turbo might come — just don't call it a Mazdaspeed 3, or view it as an overt hot hatch. But the shoe fits.

2019 Mazda3 gets only two engines in U.S.; here are details on suspension, AWD

We learned a lot about the 2019 Mazda3 hatchback and sedan when it made its debut at the L.A. Auto Show. It will still have a manual transmission, it will offer all-wheel drive for the first time, and it's a stunner inside and out. But we still had questions about some of the details, so we spoke with folks from Mazda, including a couple of engineers for details on engines, suspension and drivetrains. First off, of the five engines announced for the Mazda3, just two of them are slated for the United States. At launch, the Mazda3 will be offered only with a naturally aspirated 2.5-liter four-cylinder. It's mechanically pretty much the same as what you'll find in the Mazda CX-5 and Mazda6. It even features cylinder deactivation. The only real difference between this engine, its predecessor, and the one in other Mazdas is some minor engine tuning tweaks. Power is almost the same with 186 horsepower and 186 pound-feet of torque, gains of 2 horsepower and 1 pound-foot. Fuel economy is rated at 27 mpg in the city, 36 on the highway, and 30 overall for front-wheel-drive models. We would expect the all-wheel-drive model to have slightly worse fuel economy simply due to extra weight and having to power two extra wheels. The Skyactiv-X engine will become available later in 2019. It will be rolled out in Europe first, with America coming after. When it does come here, it will be offered in states with stricter emissions regulations before coming to other states. While we're on the topic of engines, we also probed a bit about the possibility of the turbocharged 2.5-liter engine coming to the Mazda3. We did get the typical response of not being able to comment on future product. However, they did confirm that the turbocharged engine does in fact fit in the new Mazda3, since it and the naturally aspirated engine are very similar, and the naturally aspirated engine still uses an enormous header, meaning turbo plumbing wouldn't be an issue. Everyone we spoke with at Mazda did emphasize that they are listening closely to buyers, which is what led to the turbo engine being offered on the Mazda6 and CX-5, as well as the introduction of all-wheel-drive to the Mazda3. So, if you, like us, want to see the turbo engine added to the Mazda3, let the company know. They might just do it. Now as for drivetrains, the company is still deciding which trims and which combinations of engines will be offered.

2018 L.A. Auto Show: 5-plus takeaways on Jeep, Honda, Porsche and more

The 2018 L.A. Auto Show is making a strong case that auto shows aren't dead. Carmakers are ladling out sports cars and SUVs featuring serious style and performance in Los Angeles, and it's a feast for the senses. We're talking the new Porsche 911, the long-awaited Jeep Gladiator and the stylish Mazda3. It's the best car show with the most important reveals since the 2018 Detroit Auto Show kicked off the year. Here are some quick reactions: The 2019 Jeep Gladiator is a rock star When the story went live on Autoblog, our traffic went straight up. I've literally never seen the graph go straight up. So yeah, you guys seem to like it. I do, too. It's everything I want in a vehicle, including enough of a retro feel that it satisfies my cravings for an old Cherokee XJ. It's more capable and likely more expensive than I originally anticipated, but Jeep is going to have to expand its Toledo factory to keep up with demand. Don't be fooled by whatever the politicians say when that happens. It's because people like Jeeps and pickups, and this is the hero sandwich of all of that. I'd likely go with the 3.6-liter and a manual transmission if I were buying a Gladiator, but the diesel is compelling, too. Gladiator is a great name, drenched in history. I like it better than Scrambler, which never felt right to me. Only issue: It's a little over-the-top. Imagine this conversation: "So, ready to go to Panera?" "Sure, let's take the Gladiator." I mean, it's a bit much to refer to your personal vehicle as the Gladiator. Unless Russell Crowe is driving it. Then it's fine. The 2020 Porsche 911 is conservatively brilliant Every time I drive a 718 Cayman, Jaguar F-Type or another 911 challenger, I wonder if the 911 may be over the hill. It's not. And it likely never will be. This latest generation, dubbed 992 in Porsche-speak, stayed the course. The back takes some Mission E stylings that give the 911 a more modern feel. The flat six gets a little more power. The digital-heavy interior looks futuristic and slick. But overall, it's a blocking-and-tackling update that should satisfy the purists and maybe draw in a few new Porsche fans. It's the right time for the 2019 Honda Passport This slots between the Honda CR-V and the Honda Pilot. That's serious segmentation, but it's another crossover, and it's undoubtedly what the people want.

The redesigned 2019 Mazda3 moves way upscale

Mazda didn't lie — the 2019 Mazda3 is a gently reworked production version of the Kai concept shown at last year's Tokyo Auto Show. In hatchback and sedan forms, you'll still quickly peg this a Mazda3. The dimensions barely change: The wheelbase grows by an inch, but the hatchback width and length carry over, while height decreases by an inch; the sedan is the same width but 3.2 inches longer and 0.7 inches lower. Nevertheless, the look and details have evolved throughout, yielding a much more potent and piercing hatchback, and a more sophisticated, accomplished sedan. Instead of using hard shoulder and swage lines to "draw" contour onto a flat profile, Mazda designed a car with contours that create real shoulders and hips. Shedding the illusion of surface depth for reality redefines the look and presence of the Mazda3. The new model erases the hash of lines and embossed panels in back of the current car so that the S-curved hatch has only its shutline for framing. After that, the highlights enhance the theme. On either side of the larger grille, single-lens headlamps get new accents; instead of a just plain silver bar, streaks of amber turn signals decorate the more dimensional units. The contoured taillamp housing holds highly structured, highly embellished twin circles that probably look even more sinister at night. On the sedan, those naughty taillights are surrounded by a refined rear valance with a more angled, muscular lip along the trailing edge. It's the same inside, a design based on results of Mazda's in-depth studies of human mechanics. The flatter instrument panel stresses clean lines along the horizontal. Trimmer steering wheel spokes with silver buttons line up with the central span across the dash housing the climate control buttons and vents. The new shift panel sits higher and more forward, making it easier for the driver to move a hand from the steering wheel to the lever. To raise perceived luxury, the center tunnel trim is a clear layer laid over a laser-engraved black layer, said to produce a "look of deep transparency," and similar to the effect found on the new BMW X5 and X7. The cupholders are now in front of the shifters, and the armrest is longer. There's no mention of that digital gauge cluster that leaked earlier this year, though. Buyers who opt for fabric will get a new "Greige" hue, a mix of gray and beige. Mazda designed a new leather grain with creases of varying depths and shapes depending on where it's placed.

Mazda's Apple CarPlay and Android Auto retrofit costs $199 plus labor

In relation to the rest of the market, Mazda was a bit behind with introducing Apple CarPlay and Android Auto to its model range, but it's trying to make up ground. But now, vehicles equipped with Mazda Connect from the 2014 model year and newer are eligible for a dealer-installed upgrade with smartphone integration capabilities. But it's not a free update. Mazda first introduced Carplay and Android Auto capabilities on the 2018 Mazda 6 and further extended the technology to the 2019 CX-9 and CX-5 utility vehicles. Now the company wants to make the smartphone interfaces available across the lineup. For $199, plus labor costs, owners can buy the upgrade. In addition to the updated Mazda Connect software, Mazda will also update hardware, including more powerful and faster-charging 2.1-amp USB ports. It is important to remember that Mazda's infotainment touchscreens do not function while driving, so even with Android Auto or Apple CarPlay, functionality will run through the command knob, buttons, or voice commands. For those interested in the upgrade, it is recommended to schedule an appointment for the upfitting. The service will take approximately two hours.UPDATE: A previous version of this story mistakenly said that Mazda's infotainment systems are not touchscreens. This is incorrect. The story has been updated accordingly.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2018 Mazda6 Turbo first drive