2006 Mazda 6 Mazdaspeed6 Sedan 4-door 2.3l on 2040-cars

Auto blog

The Mazda MX-5 Miata is truly a four-season sports car

For all intents and purposes, the Mazda MX-5 Miata is a product of California. I know it says Hiroshima on the shipping container, but the car belongs to the Golden State as it was dreamt up in Irvine and honed its driving skills on the roads near Santa Barbara. And logic would dictate the Miata would be useless in any situation other than direct sunlight. That's what drivers from other states would think, anyway. It's the time of year when those of us from the west coast fly out to places where it's snowy and icy and everyone laughs at us because the cold and white stuff essentially shuts us down. Make fun of Californians driving in the rain or freaking out when the outside temperature dips below 55 degrees. What can we say, we're just out of our element. Perhaps, then, it's surprising the Miata handles snow a lot better than I do. I found this out when Mazda sent me to Crested Butte, CO, for a little fun on a frozen track. Yes, there was a lot of sideways action, but it had more to do with the two California residents inside than with the car. The company really invited journalists to Colorado to get an idea of how its all-wheel-drive crossovers perform when things get snowy and icy. But the real show was watching how we navigated the autocross course they set up for the rear-drive Miatas that Mazda brought along. The Miata had a good heater, but it was my laughter caused by immense admiration that kept me from freezing my fingers off. Armed with a set of Bridgestone Blizzak winter tires, the Miata performs just about how you'd expect it to – if you're light on the gas and quick with the steering and have a good amount of patience in you. It all works well if you're a pro driver, less so if you're not a frequent track visitor, regardless of the weather. But fortunately we were using the fourth-generation Miata, which has to be the most forgiving sports car ever. On pavement, it behaves like a compact hatchback. Put it in sixth and it's relaxed and compliant, with a ride that doesn't beat you up and an engine that knows when you just want to get where you need to go. Provoke it, however, and it rewards you with predictable responses from the controls. It does the same thing on ice, if you have a firm grasp on how a car responds to the frozen stuff. Starts are tricky, even in second gear, if you underestimate the power from the 2.0-liter four.

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video:

2019 Mazda3 fuel economy announced for AWD, hatchback models

Although Mazda engineers gave us fuel economy numbers for one configuration of 2019 Mazda3 at the car's Los Angeles debut, there were still a few versions left out. Now Mazda has released the data for every body style, drivetrain and transmission configuration. That includes the all-new all-wheel-drive iteration, which we will have a full review of this week. Discerning these numbers is a tad tricky since there are three powertrain combinations for each 2019 Mazda3 bodystyle, and they all get slightly different fuel economy. We've listed the different combinations in a chart below: There are a few key takeaways, the first being that the sedan is always the most efficient version of the Mazda3, likely because of better aerodynamics compared to the hatchback. Second, all-wheel drive will cost you fuel economy due to the extra weight of the axles and differential, and the added drag on the engine. Third, the most efficient versions of each body have the same fuel economy numbers as the outgoing Mazda3. The manual transmission-equipped Mazda3 has actually improved fuel economy over the old version by 2 mpg on the highway, and 1 in combined driving. Also worth noting is that only one trim level of the sedan is available with cylinder deactivation and front-wheel drive, and that's the top-level Premium trim. Opting for all-wheel drive on any trim or body style will come with an engine with cylinder deactivation. The hatchback is also the only Mazda3 available with a manual transmission, and it's only offered on the front-drive version.