Beautiful Starlight Mica Miata, Less Than 23k Miles! on 2040-cars

Auto blog

Mazda CX-5 in auto-brake accident on Japanese test drive

As we slowly march towards a world where our cars will drive for us, there will be mishaps. Systems will act up, not behave has intended or we'll simply forget to turn them on. We all remember when Volvo tested the S60's City Safety system. Now Mazda has had an issue of its own.
During a test of a Mazda CX-5's Smart City Brake Support on a dealership lot in Japan, a prospective customer and a dealership employee were injured when they hit a urethane barrier used for testing the system. According to Bloomberg, which spoke with the Saitama Prefectural Police, the impact with the barrier left the customer with an injured neck while the dealership employee suffered a fractured arm. Considering the injuries, we imagine this wasn't a small barrier.
"For any safety function, it's impossible to be 100-percent free of accidents. These technical functions aren't always the easiest to understand," IHS Automotive auto parts analyst, Hiroshi Ataka told Bloomberg.

Mazda explains the thinking behind the MX-30's small battery pack

Mazda's first production-bound electric car, the MX-30, relies on a 35.5-kilowatt-hour lithium-ion battery pack for power. That's relatively small, but the Japanese firm argued it's exactly what the model needs to let motorists drive electric while keeping their environmental footprint in check. Christian Schultze, head of Mazda's European research and development center, told Automotive News Europe the MX-30's battery is responsibly-sized. He explained engineers took a variety of factors into account when debating kilowatt-hours, including how much energy is required to build the pack, how much electricity is needed for a full charge, and the environmental impact of replacing the battery, which Mazda expects could be necessary after the MX-30 has covered about 100,000 miles. Sticking with a smaller pack yields total CO2 emissions on par with a turbodiesel-powered Mazda3. In contrast, using a 95-kilowatt-hour battery (which is close to what Tesla's bigger models use) would have increased the MX-30's life-long CO2 output considerably by requiring more energy to build, and needing far more electricity to achieve a 100% charge. We're not quite sure that math or battery longevity assumption hold up under scrutiny. In any case, small is the direction Mazda decided to go. The trade-off is that the MX-30 (pictured) is expected to drive for about 124 miles between charges, and that figure was achieved on the hugely optimistic WLTP testing cycle; real-world mileage will be lower. That's hardly a jaw-dropping number, and the crossover doesn't qualify for the coveted long-range label, but Schultze told British magazine Autocar it's more than enough to cover the daily transportation requirements of the average European motorist, which stands at a total of 31 miles. That's significant, because Europe will be one of the MX-30's key markets. Deliveries are scheduled to begin in early 2021. Mazda hasn't announced whether it will sell the MX-30 in the United States, or if it will wait until it has a longer-range electric car to enter the segment.

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.