2012 Mazda Mazda2 Sport Damaged Salvage Repairable Runs! Cooling Good Wont Last! on 2040-cars

Auto blog

Mazda starts production of new MX-5 Miata in Japan

We often regard a new model as having arrived when its manufacturer reveals it for the first time. But you might argue that nothing is official until actual production gets underway. And that's just what's happened now with the new Mazda MX-5. The fourth-generation Miata was unveiled a few months ago, and now the first examples have begun to roll off the assembly line at Mazda's Ujina plant in Hiroshima. The first ones are set to stay in Japan, where the new roadster is being introduced initially. Deliveries are set to launch in June. After that, we can expect the new MX-5 to proliferate to markets around the world, including our own. To date Mazda has sold more than 950,000 of its little roadsters, making it the best-selling two-seat sports car in the world. It shouldn't be long, then, before the new model tips it past the million-unit mark. 2015/03/05 Mazda Starts Production of All-new Mazda MX-5 HIROSHIMA, Japan-Mazda Motor Corporation today began production of the all-new Mazda MX-5 two-seater lightweight sports car (known as Mazda Roadster in Japan) at Ujina Plant No.1 in Hiroshima. The first models produced are destined for the Japanese market. Sales of the all-new MX-5 will begin in Japan around June this year and interested buyers can make an appointment for pre-sale discussions through a dedicated website from noon on Friday, March 20. Following sales start in Japan, the MX-5 will be progressively rolled out to overseas markets. The MX-5 is an iconic model representing Mazda's vehicle engineering philosophy: the pursuit of driving pleasure. With production exceeding 950,000 units as of the end of January 2015, the MX-5 continues to hold the Guinness World Record for the world's best-selling two-seater sports car. In order to respond to ever increasing demands for safety features and environmental performance while maintaining the element of fun that has always defined the model, development of the fourth generation MX-5 was carried out under the motto "innovate in order to preserve". In addition to incorporating SKYACTIV TECHNOLOGY and KODO-Soul of Motion design, development focused on enhancing the senses and sensations through which people enjoy cars. Moving forward, Mazda will continue to enrich the lives of its customers through a variety of touch points including the production of high-quality vehicles, and become a brand that maintains a special bond with its customers. Related Video:

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

2019 Mazda CX-3 crossover updated with a tad more power and refinement

NEW YORK — Mazda's smallest vehicle, the CX-3 subcompact crossover, is getting a refresh for the 2019 model year. Visually, you'd be hard-pressed to tell what changed, and that's because not much did. The grille now has slats that are grouped in pairs, and the rear taillights have been redesigned. But there are a number of changes aside from visuals that separate this model from the 2018. Under the hood is still a 2.0-liter naturally aspirated four-cylinder engine. It picks up two more horsepower and pound-feet of torque for totals of 148 for each, though Mazda says that it also picks up torque across more of the rev band and gets better fuel economy. Mazda didn't have official mileage numbers, though. The CX-3 will also now come with the G-Vectoring Control system that helps improve turn-in by reducing torque and shifting weight forward. The steering and suspension have been slightly retuned, and the tires developed to better absorb bumps. Deeper inside the CX-3, several changes should make the driving experience more calm and refined. These include thicker door panels and rear door glass to make things quieter. The seats are now wider with redesigned foam cushions for greater comfort. A new integrated armrest in the center console and one in the rear seats with cup holders help the same cause. Mazda will also add faux suede trim to the cabins of CX-3s for a more premium feel. Pricing hasn't been announced for the new CX-3, but the little crossover will go on sale in late spring. So expect pricing to come soon. Fuel economy numbers will likely be available soon, too. Related Video: