Mazda MX-5 Miata Sof Top, page #6

Auto blog

Mazda CX-9 Luggage Test | How much fits behind the third row?

We recently tested the luggage-carrying capability of one of the most spacious three-row crossovers, the Hyundai Palisade, and now it's time for one of the smallest. The Mazda CX-9 may look terrific and drive even better, but that zest comes at the expense of cargo capacity, as we're about to see. The big culprit is that rakish liftgate, which not only robs the CX-9 of luggage space, but third-row headroom as well. It's pretty dungeon-like back there despite competitive legroom, and there aren't any air vents or USB ports, either. But this is about cargo capacity, so let's see how much luggage will fit inside. According to the specs, the CX-9 has 38.2 cubic-feet with the third-row lowered. That's far less than the Palisade's 45.8 and Honda Pilot's 46.8. It's actually even less than the five-passenger Honda Passport (50.5).  The test car came with a $100 cargo mat, which is velcroed to the seats and folds OK with it, but the carpet also takes up some extra space ... and the CX-9 needs as much as it can get.  To raise the seats, lean inside and pull up/back on those two handles. There is 14.4 cubic-feet of space behind the raised third row. On paper, that is indeed one of the smaller amounts in the segment, but in practice, it seems even smaller.  You can free up space by removing the rigid floor panel. If you need to carry multiple pieces of luggage, it's almost a necessity.  OK, so I have two midsize roller suitcases, both of which would need to be checked. Then there's two larger carry-on roll-aboards and one smaller one. As a bonus, there's my wife's quasi-fancy weekend bag. It was a struggle to fit three of them aboard, and Tetrised together two formations. The first uses all three carry-on bags with the cargo floor removed. And no, the fancy bag won't fit atop the blue one because it'll run into the liftgate window. A smaller tote would definitely fit, however.  This is how I could fit one of the bigger check-in bags. The liftgate just barely closed. Again, you could fit a small tote atop the blue bag, plus some other items in the lower outboard regions.  OK, so how could you fit everything aboard? Lowering half of the 50/50-split third row is a must, obviously. Both big check-in bags then stack atop each other, and then stack the other four atop each other with the cargo floor in place.

A Mazda Miata with a Hellcat V8 exists, and it can be yours

Mazda Miatas with V8 swaps aren't unusual. Kits are available to drop in LS V8s from GM, and some even let you drop in an old Ford 5.0-liter V8. But a Miata with a Hellcat V8 is something special, and this one can be yours. As Automobile spotted, it will go across the block at the Barrett-Jackson Las Vegas auction. This particular 1999 Miata has a build history you can check out for yourself, too. It was all chronicled on YouTube channel KARR. Obviously the Hellcat engine does fit between the wheels, but the hood had to be cut open for the intake manifold and supercharger to fit. The front bumper and lights have been changed to the 2001+ NB Miata design. According to the listing, it has suspension components from V8 Roadsters, a company that specializes in Miatas with twice the normal number of cylinders. In the middle of the car is a manual transmission, which connects to a Ford 8.8-inch differential that's been welded up. With that much power and an essentially locked rear diff, it should make for an excellent drift car. Fortunately it also has 10-inch wide wheels for more grip, and upgraded Wilwood brakes to stop it. It will go for auction at Barrett-Jackson's Las Vegas event, which runs Oct. 3-5. There is no estimated price for the car, which is understandable since nothing like it has crossed the block before. It will go to a new owner, whatever the price, as it is being listed as "no reserve." So if you want to win burnout contests or get loads of stares at next year's Woodward Dream Cruise, you could do a lot worse than picking up this tiny monster. Aftermarket Dodge Mazda Convertible Performance Hellcat

Mazda bringing electric car to the Tokyo Motor Show

In June this year, Mazda CEO Akira Marumoto told Automotive News Europe that "the first Mazda battery-electric vehicle will hit the market next year." Earlier this month, Mazda invited journalists to Oslo, Norway, to learn more about the automaker's EV plans and drive a prototype of the e-TPV powertrain, the letter designation standing for electric-Technology Prove-out Vehicle. Mazda had dressed the e-TPV production-intent powertrain under bodywork from the carmaker's new CX-30 compact crossover. Automotive News reports that Mazda will unveil its actual EV at the Tokyo Motor Show next month, which a Mazda spokesperson confirmed.     Mazda developed the powertrain in-house, engineered for buyers in dense urban environments. A 35.5-kWh lithium-ion battery powers a single electric motor wiith 141 horsepower and 195 pound-feet of torque. Range is said to be 200 kilometers (124 miles) on the city cycle, but that's likely on the Japanese or WLTP cycle that returns larger numbers than the U.S. EPA. The mechanical figures lie between the 28-kWh battery of the Hyundai Ioniq Electric and the 40-kWh battery of the standard Nissan Leaf. The EPA rates the less-powerful Ioniq for 124 miles of range, while the more powerful Leaf can go 150 miles. AN writes that Mazda's initial planned markets include Japan, China, and Europe where 124 miles is plenty for day trips. A version serving markets known for urban sprawl would employ a rotary engine range extender, a tech tidbit Mazda's spoken about regularly over the past year.   Iain Curry of Australian outlet Chasing Cars had good things to say about the e-TPV prototype he drove. Curry said the experimental car didn't offer strong regen braking and piped a mild four-cylinder soundtrack into the cabin to give drivers a connection to the ICE experience they're familiar with, but there's no word on whether the production vehicle will be set up the same way. Curry praised the handling, saying the e-TPV felt similar to a Mazda3 on the go and around corners. We'll get more concrete info next month in Japan. The show car in Tokyo will be a "brand-new model" on a new EV-specific platform, and don't be surprised by a compact crossover shape since the carmaker CEO said, "Our global crossover mix is currently about 60 percent."

Production Mazda Vision Coupe concept, GRMN Supra, new BRZ/86 coming

After writing about what's in store for the next-generation Subaru WRX, Japan's Best Car magazine is back with more spy work on what's ahead for the coming Mazda sedan, fighting-spec GRMN Toyota Supra, and next-generation Subaru BRZ/Toyota 86. All three are supposedly headed for previews at this year's Tokyo Motor Show before rolling out in 2021 and 2022. Mazda showed the Vision Coupe concept at the 2017 Tokyo show, then sneaked a mention of a rear- and all-wheel drive "Large Architecture" and two inline-six engines into a 2019 investor's report. Best Car says that concept's production version will house a 3.0-liter Skyactiv-X SPCCI inline-six with "M-Hybrid" 48-volt assistance. Output figures remain a mystery, but the mag says engineers are aiming for 345 horsepower. The real deal isn't slated for dealers until 2022, bringing what Mazda bills as a "BMW, Audi quality car at the price of Volkswagen." A further treat: Best Car says the Hiroshima automaker is laying out a two-door version on the same platform. Not even a month after 2020 Toyota Supra chief engineer Tetsuya Tada told us, "With a sports car, the promise is to offer more performance with each additional version," this report says the full-fat GRMN Supra will raise the stakes. Expected in the latter stages of 2021, the current 335-hp Supra will get an "output eventually close to 400 ps" (about 394 horsepower) from its BMW-source 3.0-liter straight-six. Along with that will come a lighter, stiffer body, and a sportier suspension tune to manage and make the most of the 60-horse increase. Best Car says the next-generation Toyota 86 / Subaru BRZ will move to a new platform, without specifying whether it would be Toyota's TNGA platform suggested by a report in April — not that there are many other options. Neither the footprint nor the body dimensions are predicted to change, and transmissions will continue to include a six-speed manual and a six-speed automatic. The new platform will hold a new engine, although it won't be the revelation many fans want. The magazine says the Subaru 2.0-liter FA20 will retire, making way for the Subaru 2.4-liter FA24. The FA24 is the same engine in the Subaru Ascent crossover, where it produces 260 hp and 277 lb-ft. There'll be no such fireworks for the sporty twins due in the first half of 2021, output reported to be "improved to 220 ps," or 217 hp — a 12-hp bump over the current figure.

2020 Mazda3 hatchback starts at $24,620, a $100 increase

Car and Driver got the scoop on some 2020 Mazda3 pricing, and anyone waiting for the new model year had better bring more money. The Mazda3 sedan goes up by $500 to $21,500. After the $920 destination charge, that's a total of $22,420. On the sedan, however, the extra dosh pays for extra equipment. Every sedan trim gets Mazda's i-Activsense driver assistance tech, meaning adaptive cruise control, automatic emergency braking, blind-spot monitoring, lane-keep assist, and lane-departure warning. The i-Activsense suite had been an option the sedan's entry-level trims. The Mazda3 sedan in Select guise, one step above the entry-level model, increases $100 to $23,620. Starting price for the front-wheel drive 2020-model-year hatchback comes in at $24,620 after destination. C/D says that's a $1,020 bump, but we believe that figure is an error. Based on the fact that Mazda's U.S. pricing rounds off to the nearest hundred and destination is $920, it seems more likely the $24,620 price includes destination. In that case, the 2020 Mazda3 hatch only goes up by $100. The five-door models don't get any more equipment, but Mazda say's there's a new finish for the wheels on the top-tier Premium trim. All other trims hold steady. The 2.5-liter four-cylinder with a square 186 horsepower and 186 pound-feet of torque remains the sole engine option, a six-speed automatic is the standard transmission on all trims, the hatchback in Premium form offering a six-speed manual option. Buyers of the entry-level sedan are stuck with front-wheel drive, while every other trim offers all-wheel drive for $1,400. The sedans should hit dealerships this month, and the hatchbacks will roll in come September.

Welcome Audi RS6 Avant, goodbye Lincoln Continental | Autoblog Podcast #592

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and Assistant Editor Zac Palmer. Our editors cover a lot this week, starting with the news. They geek out over the Audi RS6 Avant coming to America, and mourn the loss of the Lincoln Continental. They address rumors of the Toyota Land Cruiser's demise, and analyze spy photos of the Ford Mach E electric crossover. They also honor the memory of the godfather of spy photography, Jim Dunne. Finally, they talk about driving the BMW Z4, Ram 1500 EcoDiesel, and another diesel, the diesel-powered Mazda CX-5 Skyactiv-D. Autoblog Podcast #592 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Audi RS6 Avant headed to U.S. Lincoln Continental discontinued Rumor: Toyota Land Cruiser to be canceled Ford Mach E spied RIP spy photographer Jim Dunne Cars we're driving: 2019 BMW Z4 sDrive30i 2020 Ram 1500 EcoDiesel 2019 Mazda CX-5 Diesel Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:      

2019 Mazda3 Hatchback AWD Premium Second Drive | Gushing about an exceptional car

The 2019 Mazda3 Hatchback is quite simply one of the best cars I've ever driven. During my week with one, specifically a range-topping Premium package version for $31,335, I struggled to come up with bad things to say apart from elements like rear visibility and back seat headroom that are directly related to its distinctive, avant garde design. That's an acceptable tradeoff in my book. So many of the new 3's elements can serve as a measuring stick for other cars. Not just its specific compact hatchback/sedan class, but all other cars, period. I had the Mercedes CLS 450 at the exact time, a car I deeply appreciate and that cost $69,000 more, and yet it was a struggle to decide which I wanted to drive. Perhaps not surprising given the 3's history, but the measuring stick is set first by the handling. It dances between corners with composure and feedback that you just don't get in cars any more Í– let alone at this price point. This is a car you feel through your butt, your heels on the floor and your hands on the wheel. Everything is just so right. And it should be noted that I came to this conclusion before remembering that Mazda switched to a cheaper, less sophisticated torsion beam rear suspension for this latest model. Perhaps you can tell the difference driving 10/10ths at a test track, but in the real world, I certainly didn't notice or log a complaint. Grip is superb. Even when the tires gave way a bit on my mountain road evaluation route, there was only a bit of squealing and it resolutely whipped itself through hairpins with shockingly little understeer for a front-drive-based car, helped no doubt by its all-wheel drive system. It would be interesting to see how much understeer the front-drive versions allow, and whether AWD is mitigating torque steer given the 3's not-insignificant power. As it is, the 3's standard 2.5-liter four-cylinder produces 186 horsepower and 186 pound-feet of torque, which is substantially better than virtually every other base engine in the segment. Its throttle response should be copied by everyone, as should the steering. OK, maybe not Porsche, which I keep finding myself drawing comparisons to whenever experiencing a new Mazda. Take that as the compliment it seems to be. I'd also like to note that the 3 has a six-speed automatic transmission rather than an easily confused eight-, nine- or eleventy-speed unit. Or a damn CVT.

Mazda's first-quarter profit slumps on weak sales in U.S. and China

TOKYO — Mazda reported a 79% drop in quarterly operating profit, falling significantly short of estimates, as it continues to struggle with declining U.S. and Chinese sales, while a strengthening yen also cut into its bottom line. Operating profit at JapanÂ’s No.5 automaker was 7.0 billion yen ($64 million) in the first quarter ended June, versus around 33 billion yen a year ago and less than half of an average forecast for 18.5 billion yen from analysts polled by Refinitiv. Mazda, however, reiterated its forecast for a 33% rise in operating profit to 110 billion yen in the year ending March. ThursdayÂ’s profit announcement marks MazdaÂ’s poorest first-quarter operating performance since the June 2012 quarter. The automaker has been struggling with falling demand for its cars over the past year or so, while it is also recovering from flood-related damage to its factories in Japan that led to a quarterly loss in the July quarter of 2018. The Nikkei business daily on Wednesday had reported that operating profit at the company would fall around 70% for the quarter due to lower sales in the United States. Mazda posted global sales of 353,000 units for the quarter, down 12% from a year ago. Its sales in the United States, its biggest market, fell 15% to 68,000 units, while in China, Mazda sold 54,000 vehicles, down 21% on the year. A trade war between the top two economies and slowing growth in China, the worldÂ’s biggest auto market, have prompted a broad-based sales downturn in the global auto sector. Automakers are grappling with easing demand for cars just as they must invest heavily in new technologies including electric cars, autonomous driving technologies and ride-sharing services to survive a major industry shift away from car ownership. Many of MazdaÂ’s rivals at home and abroad have been reporting disappointing quarterly results, with Nissan and Ford also announcing job cuts and possible plant closures earlier this month. The United States is a key source of revenue for Mazda, but it imports all its vehicles sold there, exposing it to a threatened hike in U.S. tariffs on imported cars from Japan. To limit its vulnerability to possible tariffs and currency fluctuations, Mazda is investing in a new plant in the U.S. state of Alabama, a joint project with Toyota.

Mazda2 refreshed for 2020 with new style and tech

The North American market Toyota Yaris is a badge engineered version of the Mazda 2. Now, the Mazda underneath the Toyota badging has received some updates in its home market of Japan, and it will be interesting to see if or when the U.S. counterpart will be refreshed with any of these updates. The 2020 Mazda 2, now indeed called "Mazda 2" instead of the older Demio name on the Japanese market, has received new front end styling to bring it in line with bigger Mazda models. The grille and bumper are new, as are the headlights with adaptive LED technology and LED daytime running lights. Apparently the headlights are constructed out of 20 individually controlled LED blocks to optimize light output and direction, which sounds awfully interesting for this class of vehicle. The front end design, just like the new 16-inch alloy wheels, is Mazda-specific and the Yarisized version is unlikely to benefit from them, especially since the headlights are also different on the Toyota. Cabin materials have also been updated, and the driver’s seat is available with six-way power adjustability for 2020. The MZD Connect infotainment has Apple Carplay and Android Auto support, like the Yaris setup. In addition, cabin comfort is said to have been improved with better soundproofing, which is sometimes sorely needed in this class of cars. Safety and convenience features include adaptive cruise control, which is impressive on a city car, and the Mazda 2 also has the G-Vectoring Control Plus system for high-speed stability. Both the diesel and gasoline versions will get Mazda's i-Eloop brake energy regeneration system. The Japanese market also gets an all-wheel-drive version, which is surely a hoot despite only being available with the automatic transmission. CarAdvice says the Australian market will receive the redesigned Mazda 2 early next year, which is probably in line with the rest of the global market that gets it as a Mazda instead of a Toyota; Mazda says Japan market pre-orders have started today and official sales will begin on September 12th. It pays to remember that the base car dates back to 2014, and that the 2020 refresh is a facelift instead of a ground-up redesign. Assuming the usually expected shelf-life for the facelifted edition, the 2 will have racked up respectable mileage from the “DJ” generation bodyshell.

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.