2000 Mpv, Leather, Sunroof, 4 Captain Seats, 6 Cd Changer, Rear A/c on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Perk up your Mazda Miata with BBR's new 248-horsepower turbo kit

For three decades, enthusiasts have argued whether the Mazda MX-5 Miata needs more power. For its part, Mazda seems fine with leaving the Miata as is, even reducing the horsepower from the third- to fourth-generation models, though the car lost a little weight. That's where tuners like BBR in the UK and Flyin' Miata here in the US step in, offering aftermarket solutions for those that crave a little more grunt. BBR announced today that its new 248-horsepower Stage 1 turbo kit is ready and waiting for the new 2.0-liter-powered ND Miatas, including the new Miata RF. BBR's first Miata turbo kit was released all the way back in 1990. Since then, the shop has been tuning and honing its craft, releasing ever-more potent variations its comprehensive power kit. This new version, like the previous ones, focuses not only on adding more power but maintaining the level of drivability and refinement you expect from all Miatas. The Mazda electronic safety features are retained, and the team is working on CARB emissions approval. That said, with BBR tune an ND Miata will hit 60 mph in just 5.0 seconds, roughly two seconds quicker than stock. To get the peak 248 horsepower and 236 lb-ft of torque, BBR does more than simply slap on a big turbo. In 2014, BBR began using a Mazda3 as a development vehicle in preparation for the new Miata's launch. A twin-scroll turbocharger is mounted onto a custom cast-iron manifold. A front-mounted aluminum intercooler keep things cool and doesn't require cutting up the bodywork. The engine breathes in through a K&N air filter and exhales through a stainless steel downpipe. The whole thing is controlled by BBR's Starchip / EcuTek RaceRom ECU software package. Other upgrades include silicone turbo pipes, an aluminum battery tray, a recirculating piston type dump valve, a carbon-fiber heat shield, and stainless steel oil and water lines. BBR is offering extended warranties from 12 to 36 months. In the US, the sole distributor is Flyin' Miata in Colorado. At $5,695, it's not a cheap proposition, but it is less expensive than one of Flyin' Miata's V8 swap kits. Less expensive (and less potent) performance kits are also available. Related Video: News Source: BBR Aftermarket Mazda Convertible Performance turbo tuner tuning

Car and Driver lists 10Best for 2013, same as it ever was

Forgive us for having the distinct feeling of déjà vu, but it certainly feels like we've been here before. By that we are referring Car and Driver and the announcement of its annual 10Best vehicles for 2013. To be sure, it's an impressive selection of cars that combine heart-pounding performance and frugal sensibilities, but it also represents something of a broken record on the part of C/D. We're not so sure that's a flaw, though, as the resulting list is tough to argue with.
Vehicles like the Ford Mustang, Porsche Boxster, and BMW 3 Series have maintained their high-horsepower spots on this list for several years now. Even on the more practical and nimble end, the Honda Accord, Honda Fit and Mazda Miata have not budged. These continued spots are even in light of redesigns for some vehicles such as the Accord, Boxster and 3 Series.
In fact, the only newcomer to the 10Best list this year are the Scion FR-S/Subaru BRZ twins, which knocked out the Cadillac CTS-V. We think it would have been a huge misstep to have excluded the FR-S/BRZ, even in light of the supercharged Caddy's lamentable departure from 10Best.