2010 Mazda Cx-9 on 2040-cars

Auto blog

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Mazda to use rotary engine as a range-extender with its first electric vehicle

There's more news from Mazda at the Tokyo Motor Show, where the brand made a big splash, including new developments in its never-ending rotary engine saga. First, Mazda execs confirmed that the Japanese automaker will bring back the rotary engine as a range-extender and battery juicer for its first electric vehicle in 2019. But secondly, the company won't have a rotary-powered successor to its RX-7 and RX-8 sportscars in time for the company's centennial anniversary in 2020. Autoblog previously confirmed that Mazda is planning to have an EV in 2019 that will be available in both pure electric and range-extending versions. Now, the Australian website Motoring reports that the global EV will feature a powertrain similar to the experimental Japan-only Mazda2 (Demio) EV, which used a single-rotor engine as a generator to power the battery pack and increase its driving range. The publication says Mazda plans to release a series of plug-in hybrids based on existing models around 2020, then a pure electric car co-developed with Toyota and Denso in 2021 as part of the EV Common Architecture Spirit Company joint venture. A Mazda spokesman tells Autoblog the company couldn't confirm any details about future products. Meanwhile, enthusiasts shouldn't wait for a rotary-based production version of Mazda's RX-Vision concept from 2015. Motoring cites two executives who explain that the company simply lacks the capital necessary to invest in developing the new model in time for its 2020 centennial. Mazda debuted its rotary engine 50 years ago in the Cosmo Sport in part as a way to stand out from its larger Japanese competitors. The engine, which uses a spinning three-tipped rotor in place of pistons, is smaller and lighter than conventional piston engines, with a greater power-to-weight ratio and quieter, smoother operation. But it delivers less fuel economy and higher emissions — two weaknesses that could be improved via a stop-start system Mazda has developed, based on a pair of U.S. patents. The company has also been hard at work developing its next-generation Skyactiv-X engine, which uses highly precise combustion ignition technology to deliver significant gains in fuel economy and power.Related Video:

2016 Mazda MX-5 Miata configurator fulfills your droptop dreams

The first batch of 2016 Mazda MX-5 Miatas are already at dealers, but Mazda is finally launching a configurator for its completely revised sports car. Even if pricing doesn't come as a surprise, you can still have some fun creating one to your own specific tastes. The major equipment changes on the Miata happen between the Sport, Club, and Grand Touring trims, and options are generally kept light. The real standout is the Brembo/BBS package for $3,400 that's exclusive to the Club version. It adds Gunmetal 17-inch BBS wheels, Brembo front brakes with red calipers, side sill extensions, a rear bumper skirt, and keyless entry. On the Sport and Grand Touring, $1,200 buys the Appearance Package with a front air dam, side sill extensions and rear bumper skirt. There's also keyless tech for $130 on them. Mazda also offers a few items to dress up the convertible's looks. There's a choice of a black or body color rear lip spoiler for $350, and Soul Red Metallic paint adds $300. For protection, clear film for the front and rear paint is $125, all-weather floor mats go for $90, and wheel locks cost $55. Finally, a cargo net is $50. We ticked every applicable box on the Club trim above to make its $28,600 base price leap to $33,790, after the $820 destination charge on all models. Happy building. Related Video: