Sport Suv 2.3l Cd Awd Turbocharged Traction Control Stability Control Abs A/c on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Full 2016 Mazda MX-5 Miata pricing released

Take heart, roadster fans. The first 2016 Mazda MX-5 Miatas due for the US are now in production. To go along with that milestone, the Japanese automaker has finally released full pricing for the fourth-generation Miata. As previously revealed, the 2016 Miata in the base Sport trim starts at $24,915 (plus $820 destination), and for that outlay buyers get a 2.0-liter four-cylinder making 155 horsepower and 148 pound-feet of torque that's matched to a six-speed manual. The convertible comes standard with features like LED lighting and a Bluetooth-equipped audio system. For $1,075 more on all models, customers can spec a six-speed automatic gearbox, and keyless entry is another $130 but standard with the auto 'box. One rung up is the Club trim for $28,600, and it improves things with 17-inch wheels, a more aggressive body kit and a seven-inch touchscreen infotainment system. Order the manual trans, and the roadster gets a limited-slip differential, Bilstein dampers and a shock-tower brace. There's also a $3,400 package to make this version of the convertible even sportier with 17-inch BBS wheels, Brembo front brakes, side sill extensions and a rear bumper skirt. Among the regular trims, the top rung is the Grand Touring for $30,065 that adds luxuries like heated, leather seats, automatic climate control, rain-sensing wipers, and adaptive headlights. Mazda's i-Activesense is also standard and includes blind spot monitoring, rear cross-traffic alert and lane-departure warning. Finally, there's the Launch Edition, which is limited to 1,000 units, and it sells for $30,495 (or $31,570 for an automatic). All of them come in an exclusive combo of Soul Red with Sport Tan leather, and buyers get all of the Grand Touring's kit, plus standard keyless entry. The order site for these special roadsters opens on May 5, but hopefuls can pre-register now for a reminder. The first 2016 Miatas should hit dealers in late summer. That should provide some time for top down driving fun before it gets too cold. Related Video: U.S.-Bound 2016 Mazda MX-5 Miata Production Kicks Off Today - Mazda Also Announces U.S. Pricing for Entire MX-5 Lineup - IRVINE, Calif. (April 20, 2015) – The wait is almost over, as North America-bound 2016 Mazda MX-5 Miata production began today, signaling the imminent arrival of the next generation of the world's most popular two-seat roadster at U.S. dealers.