2022 Mazda Cx-5 2.5 S Carbon Edition on 2040-cars

Auto blog

Junkyard Gem: 1986 Mazda 323 DX Hatchback

Mazda built generation after generation of the Familia, starting with the Giugiaro-styled machines of the 1960s. The first Familia that sold well in North America was called the GLC (for "Great Little Car"), and it began life as a rear-wheel-drive cousin to the RX-7 before the Familia went to a front-wheel-drive platform for the 1981 model year. The GLC name stuck around these parts through 1985 — and I've documented a few discarded examples of these now-rare machines during my junkyard travels — before getting the 323 name starting in the 1986 model year. It's no sweat to find 1990s 323s in junkyards, but I've been scouring the car graveyards of the land for the elusive early 323 and, finally, found this moss-encrusted '86 in a San Francisco Bay Area yard. BMW popularized the lower-case-i nomenclature for fuel-injected cars with the first 3-Series back in the 1977 model year, and Mazda wasted no time making "1.6i" badges to tout the futuristic technology under the hood of their low-priced econo-commuter a decade later. At a time when most Civics had carburetors (and the notorious "Map of the Universe" diagram to untangle the underhood vacuum lines), the electronically fuel-injected engine in this car was a major selling point indeed. It wouldn't be many more years before the wretched Subaru Justy was the final carbureted Japanese car available in America, but this 1.6-liter B6 four-cylinder (which evolved into the engine that, flipped 90 degrees, powered the early Miatas) was high-tech stuff for a cheap car in 1986. Just 84 horsepower, but they were clean and reliable horses. In the middle 1980s, the common perception in North America was that you had to buy a Honda or Toyota if you wanted an affordable car that could make it to 200,000 miles. This 323 held together just as well as most Tercels or Civics from 1986. Of course, I've seen a junkyard RX-7 with 393,854 miles, so you just never know. When you see lots of moss and lichens on a car in a Northern California junkyard, you know it spent years — maybe decades — languishing in a shady outdoor spot. Perhaps this car racked up 20,000 miles per year slogging through a harrowing Lodi-to-Sausalito commute, then got parked and forgotten in 1996. We'll never know. With the optional automatic transmission — nearly every early 323 I've seen had the 5-speed manual — this car wouldn't have been much fun to drive. Point A to Point B would have been fine, though.

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.

Toyota, Honda, Mazda and Nissan recall 3.4 million vehicles for faulty airbags

Most vehicle recalls that take place these days are a result of some problem that happens during the manufacturing process by the automaker, but as we see here, parts suppliers can also factor in to problematic safety issues. Automotive News is reporting that a total of 3.4 million vehicles produced by Japanese automakers between 2000 and 2004 are being recalled globally due to faulty airbags produced by an outside supplier, Takata Corp.
According to the report, vehicles from Toyota, Honda, Nissan and Mazda are being recalled because of passenger front airbags that do not inflate properly. Globally, Toyota is said to be recalling around 1.73 million cars including 510,000 in the US composed of Toyota Corolla, Matrix, Sequoia and Tundra as well as the Lexus SC430 for the 2001 through 2003 model years; this is the second time this year the 2003 Corolla and Matrix have been recalled for an airbag problem. Honda is recalling 1.14 million models, Nissan another 480,000 and Mazda 45,463. The article says that Takata supplied faulty airbags to non-Japanese automakers, but it did not specify which ones.
Honda and Toyota have released information on their own websites about the recall, while Nissan and Mazda have not yet commented. Read official press releases from Honda and Toyota, below, and look for updates as we have word from the others.