Auto blog
Mazda's first-quarter profit slumps on weak sales in U.S. and China
Thu, Aug 1 2019TOKYO — Mazda reported a 79% drop in quarterly operating profit, falling significantly short of estimates, as it continues to struggle with declining U.S. and Chinese sales, while a strengthening yen also cut into its bottom line. Operating profit at JapanÂ’s No.5 automaker was 7.0 billion yen ($64 million) in the first quarter ended June, versus around 33 billion yen a year ago and less than half of an average forecast for 18.5 billion yen from analysts polled by Refinitiv. Mazda, however, reiterated its forecast for a 33% rise in operating profit to 110 billion yen in the year ending March. ThursdayÂ’s profit announcement marks MazdaÂ’s poorest first-quarter operating performance since the June 2012 quarter. The automaker has been struggling with falling demand for its cars over the past year or so, while it is also recovering from flood-related damage to its factories in Japan that led to a quarterly loss in the July quarter of 2018. The Nikkei business daily on Wednesday had reported that operating profit at the company would fall around 70% for the quarter due to lower sales in the United States. Mazda posted global sales of 353,000 units for the quarter, down 12% from a year ago. Its sales in the United States, its biggest market, fell 15% to 68,000 units, while in China, Mazda sold 54,000 vehicles, down 21% on the year. A trade war between the top two economies and slowing growth in China, the worldÂ’s biggest auto market, have prompted a broad-based sales downturn in the global auto sector. Automakers are grappling with easing demand for cars just as they must invest heavily in new technologies including electric cars, autonomous driving technologies and ride-sharing services to survive a major industry shift away from car ownership. Many of MazdaÂ’s rivals at home and abroad have been reporting disappointing quarterly results, with Nissan and Ford also announcing job cuts and possible plant closures earlier this month. The United States is a key source of revenue for Mazda, but it imports all its vehicles sold there, exposing it to a threatened hike in U.S. tariffs on imported cars from Japan. To limit its vulnerability to possible tariffs and currency fluctuations, Mazda is investing in a new plant in the U.S. state of Alabama, a joint project with Toyota.
Mazda2 refreshed for 2020 with new style and tech
Thu, Jul 18 2019The North American market Toyota Yaris is a badge engineered version of the Mazda 2. Now, the Mazda underneath the Toyota badging has received some updates in its home market of Japan, and it will be interesting to see if or when the U.S. counterpart will be refreshed with any of these updates. The 2020 Mazda 2, now indeed called "Mazda 2" instead of the older Demio name on the Japanese market, has received new front end styling to bring it in line with bigger Mazda models. The grille and bumper are new, as are the headlights with adaptive LED technology and LED daytime running lights. Apparently the headlights are constructed out of 20 individually controlled LED blocks to optimize light output and direction, which sounds awfully interesting for this class of vehicle. The front end design, just like the new 16-inch alloy wheels, is Mazda-specific and the Yarisized version is unlikely to benefit from them, especially since the headlights are also different on the Toyota. Cabin materials have also been updated, and the driver’s seat is available with six-way power adjustability for 2020. The MZD Connect infotainment has Apple Carplay and Android Auto support, like the Yaris setup. In addition, cabin comfort is said to have been improved with better soundproofing, which is sometimes sorely needed in this class of cars. Safety and convenience features include adaptive cruise control, which is impressive on a city car, and the Mazda 2 also has the G-Vectoring Control Plus system for high-speed stability. Both the diesel and gasoline versions will get Mazda's i-Eloop brake energy regeneration system. The Japanese market also gets an all-wheel-drive version, which is surely a hoot despite only being available with the automatic transmission. CarAdvice says the Australian market will receive the redesigned Mazda 2 early next year, which is probably in line with the rest of the global market that gets it as a Mazda instead of a Toyota; Mazda says Japan market pre-orders have started today and official sales will begin on September 12th. It pays to remember that the base car dates back to 2014, and that the 2020 refresh is a facelift instead of a ground-up redesign. Assuming the usually expected shelf-life for the facelifted edition, the 2 will have racked up respectable mileage from the “DJ” generation bodyshell.
Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch
Fri, Jul 12 2019Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models. According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.
Toyota will build new SUV at Alabama plant it's building with Mazda
Wed, Jul 10 2019WASHINGTON — Toyota Motor Corp said Wednesday it will build a new sport utility vehicle at its $1.6 billion joint venture assembly plant in Alabama rather than produce Corolla cars. The largest Japanese automaker announced in January 2018 it would build the factory in Alabama in a joint venture with Mazda. Toyota said the shift is due to "a growing consumer appetite for light trucks and SUVs." Mazda announced in February 2019 that it would build a new SUV at the plant. Toyota said it still expects the plan to start production in 2021. Construction remains on schedule, and hiring has begun. The plant could create up to 4,000 new jobs and build 300,000 vehicles annually. Corolla production will remain at Toyota's plant in Blue Springs, Miss.
2019 Mazda 3 recalled because the wheels could fall off while driving
Mon, Jul 1 2019Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand. “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.
Are Toyota and Lexus planning to use Mazda's straight-six and new platform?
Thu, Jun 20 2019Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.
Mazda plans to launch an EV in 2020, plug-in hybrid by 2022
Sun, Jun 9 2019Thanks to an interview Automotive News Europe conducted with Mazda president and CEO Akira Marumoto, we have more insight on Mazda's plans to lower its vehicle emissions in Europe. This will undoubtedly bring changes to the U.S. lineup, too, but The Continent sees the first fruits in part because Mazda is well over the European Union's fleet CO2 emissions target for 2021 of 95 g/km. In response to how Mazda plans to achieve the necessary reduction, Marumoto said the carmaker will launch its first EV in 2020 and have a plug-in hybrid on the road in 2021 or 2022. First, some clarification on the emissions numbers and timeline. The 95g/km figure is based on the New European Driving Cycle (NEDC) emissions schedule being phased out next year; the AN piece cites JATO Dynamics findings that Mazda Europe's fleet CO2 average is 135.2 g/km. The new Worldwide Harmonised Light Vehicle Test Procedure (WLTP) schedule comes into full effect in 2020, the fleet CO2 target under that methodology translating to 114.9 g/km. The rules dictate that 90 percent of an automaker's range needs to meet the cap number by the end of 2020, the rest of the lineup must come into compliance by the end of 2021. Failure means enormous fines. Industry analyst IHS Markit estimates "average fines for those not complying could reach ˆ624 ($707) per vehicle at the end of 2020, with a further ˆ190 ($215) increase in 2021." The penalties quickly grow so large that Fiat will reportedly pay Tesla hundreds of millions of euros to pool their fleets and avoid an even larger bill. Mazda's most popular vehicle in Europe is the CX-5 with CO2 emissions ranging from 128 g/km to 150 g/km. On top of that, for a small automaker, the size of potential fines has material effect on the R&D budgets necessary to develop the technologies that will lower emissions, and whatever EV Mazda launches in 2020 needs to sway legions of customers into purchases to be of practical use. This will be challenging. A line in the IHS Markit summary about the industry in general states, "Once in 2021 and subject to full WLTP regulatory monitoring, only a seismic shift (over the baseline) in consumer demand for BEV ('Electric-Plug-In') and PHEV ('Hybrid-Full Plug-In) will result in the full mitigation of EU28 fleet level excess emissions premiums." Mazda hooked up with Toyota and Denso in 2017 on a joint venture called EV Common Architecture Spirit Co Ltd to develop EV technology.
Mazda's Skyactiv-X power and efficiency ratings released in Europe
Thu, Jun 6 2019Mazda's long-awaited Skyactiv-X engine is finally headed for production, though not yet for the United States. The Japanese automaker says "various European countries" will get access to the unique engine in the Mazda3 starting this fall. Still, the announcement is relevant to the rest of us because we now have official power levels and fuel efficiency numbers that we can use to compare the Skyactiv-X with other engines offered in the compact Mazda. First, the power. According to Mazda, the 2.0-liter Skyactiv-X makes 178 horsepower and 165 pound-feet of torque. By way of comparison, the 2.5-liter Skyactiv-G engine currently used in the Mazda3 here in the States makes 186 hp and 186 lb-ft of torque. Sure, it's a little less powerful, but note that the displacements don't match and remember that the real reason the Skyactiv-X exists is to reduce fuel consumption. And that brings us to the Skyactiv-X's combined rating of around 53.5 miles per gallon (converted from liters per 100 kilometers). That's around 8 mpg better than the 2.0-liter engine that comes standard in Europe. Before we go any further, it's important to note that these numbers represent official figures for the European NEDC combined cycle, which means they are not directly comparable to the ratings we'll get from the United States EPA. Our official ratings will almost certainly be lower. With that disclaimer out of the way, the 2.5-liter Mazda3 scores a combined 30 mpg here in the States. The obvious unanswered question is when the Skyactiv-X might actually come to America. And the unfortunate answer is that we don't know. Mazda has yet to make an official decision on timing for the U.S market's launch of the engine, but as soon as we know, so will you.
5 stars in Euro NCAP crash tests for 5 new cars available in U.S.
Wed, May 22 2019Seven new cars have received a full five-star rating in the latest Euro NCAP crash tests. Of these, five are available in the United States: the Audi E-Tron, Lexus UX, Toyota Corolla, RAV4 and Mazda3. The Renault Clio and the Volkswagen T-Cross also took part, also receiving five stars. The Mazda3 hatchback was the fourth car in Euro NCAP history to reach an adult occupant protection score of 98%, after the Volvo V40 and XC60 and the Alfa Romeo Giulia. No NHTSA ratings for the Mazda3 or the Audi are yet available, but the Lexus and the Toyotas have all received five-star NHTSA safety ratings as well. Those three were tested as hybrid variants by Euro NCAP. Audi's first fully electric vehicle, the E-Tron, scored 91% in Euro NCAP's adult occupant rating, with unavailable knee airbags bringing down the score. The Mazda and the Toyotas offer them for the driver only, and the Lexus has the passenger's knees covered as well. The Lexus UX managed a 96% adult occupant score, close to the Mazda, and it provided better pedestrian safety (82%) than the Audi (71%), despite neither, or none, of the test vehicles having an active hood to catch pedestrians. As for the Toyotas, the Corolla, tested in both sedan and hatchback guises, scored 95% for adult occupant safety, with the RAV4 a couple notches down at 93%. Still, the five-star rating means all these vehicles are a very safe choice in their respective classes. Michiel van Ratingen, secretary general of Euro NCAP, states how important it is that even family hatchbacks perform well and have the latest safety tech available. "It is encouraging to see that all manufacturers did well, regardless of type of powertrain or class of vehicle tested," said van Ratingen. "New cars on the market continue to offer more advanced technology as standard, systems that were not even considered an option a few years ago." More crash test videos are available on Euro NCAP's YouTube channel. Audi Lexus Mazda Toyota Car Buying Safety audi etron lexus ux
Trump declaration they're a security threat stuns Japanese automakers
Tue, May 21 2019TOKYO — Japan's automakers' lobby said on Tuesday it was dismayed by President Donald Trump's declaration that some imported vehicles and parts posed a threat to U.S. national security, as the industry braces for a possible rise in U.S. tariffs. Trump made the unprecedented designation of foreign vehicles on Friday but delayed for up to six months a decision on whether to impose tariffs to allow for more time for trade talks with Japan and the European Union. "We are dismayed to hear a message suggesting that our long-time contributions of investment and employment in the United States are not welcomed," said Akio Toyoda, chairman of the Japan Automobile Manufacturers Association. "As chairman, I am deeply saddened by this decision," Toyoda, president of Toyota, said in a statement. Trump has threatened to impose tariffs of up to 25% on imported cars made by foreign automakers, a move which automakers have argued would ramp up car prices, curb the global competitiveness of U.S.-made vehicles and limit investment in the country, the world's No. 2 auto market. The United States is a vital market for Toyota, Nissan, Honda and other Japanese car makers. Autos and components are among the Asian country's biggest export products. Most of Japan's major automakers operate plants in the United States. The Japan Automobile Manufacturers Association notes that its automakers build about 4 million vehicles a year in North America, or 75 percent of what it sells here. Many are built for export, helping lessen the U.S. trade deficit Trump is concerned about. Major automakers have announced a slew of investments in the United States since Trump took office in January 2017 and put pressure on the industry to create more U.S. jobs. For its part, Toyota has pledged to invest almost $13 billion in the United States between 2017 and 2021 to boost manufacturing capacity and jobs. This includes $1.6 billion for a vehicle assembly plant in Alabama jointly run with Mazda. Government/Legal Honda Mazda Mitsubishi Nissan Toyota Trump