2003 Land Rover Discovery Ii Se on 2040-cars

Auto blog

Buy a Jaguar E-Type continuation, get a matching wristwatch

From time to time, automakers release special branded watches. Jaguar and Land Rover are no different. The latest from Land Rover isn't particularly remarkable, but one new Jaguar piece is pretty special. Jaguar partnered with British watchmaker Bremont for a line of watches, the most impressive being a 43mm watch that commemorates Jaguar's continuation series of Lightweight E-Types. Like the cars, only six of the watches will be produced, and they will be offered to the owners of those $1.5 million cars. Each watch features a serial number that matches a corresponding car, and the faces have been designed to look like the instruments aboard the E-Types. The same goes for the hands, which look like the gauge needles. The winding crown also has a tire tread pattern that wraps around the sides, with Jaguar's heritage logo on the top. And these timepieces are built with aluminum left over from the continuation E-Types. On the back is the most impressive part, though. Here is where the watch's automatic winding weight is visible. It's shaped like a vintage steering wheel, and the outer rim is made from real wood. The weight keeps the watch and its exclusive Bremont movement wound. If you can't afford this ultra-limited watch, Bremont has a line of other Jaguar watches with many of the same design cues, at prices ranging from less than $5,000 to more than $11,000. The Land Rover watch is a bit disappointing, since it bears little apparent connection to the vehicles. Zenith, the Swiss company that partnered with Land Rover for the piece, claims the design is inspired by the Range Rover. And Land Rover claims a connection in that a British explorer wore the same series watch while completing an expedition with a pair of Range Rovers. There's also the fact that the watch and the SUV are both made of aluminum, but otherwise, the Zenith watch doesn't look particularly automotive. The box sounds pretty cool, though, since it's fashioned from Land Rover wood and upholstery. Related Video:

Brabus takes on Range Rover Sport with Startech widebody kit

Of all the tuners this side of AMG, none are as close to Mercedes-Benz as Brabus. After all, when Daimler needed a tuner to spruce up the Smart car, it was Brabus that it turned to. But Brabus tunes vehicles other than Mercedes - it just uses, let's call it, a pen name. It brands them Startech, like the widebody kit it's developed for the new Range Rover Sport and will present at the Geneva Motor Show next week.
The modifications center around the carbon fiber body panels Brabus (excuse us, Startech) has developed for the British sport-ute that give it over two inches of added width. The wider fender flares encompass 23-inch wheels that are forged, ceramic-coated, skinned with low-profile rubber and fitted to a lowered suspension. The front and rear bumpers have been redone in plastic and can be fitted with or without the wider fenders, and there's a three-piece roof spoiler at the back.
Startech is also offering an upgrade for the 3.0-liter twin-turbo-diesel V6 that squeezes out an extra 31 horsepower and 59 pound-feet of torque for a total of 323 hp and 501 lb-ft, dropping the 0-62 time from 7.2 seconds to 6.9. The German tuner also has a wide array of interior modifications on offer, details of which you can read about in the press release below and scope out in the high-resolution image gallery above.

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.