New 2013 Jeep Wrangler Sahara 4wd 4dr Unlimited - Free Shipping Or Airfare on 2040-cars

Auto blog

Petrolicious profiles an heirloom Willys Jeep CJ-3B

Things tend to move pretty quickly in the automotive industry, but some icons that endure. Most of them are off-roaders – the Land Rover Defender, Mercedes G-Wagen, and of course the Jeep Wrangler. The latter traces its roots, of course, to the CJ-model Willys Jeep, built for civilian use in the wake of World War Two where it cut its teeth on the shores of Normandy and kicking off a legend that still endures over half a century later. For its latest video, Petrolicious profiles one such off-roader, and the man who owns it. That man is Larry Shank from California, and his ride is a 1953 Willys Jeep CJ-3B hooked up to a 1947 Ken-Skill Kustom Kamper Model 10. Both belonged to his father before him, and they would take family vacations in the wheeled pair from when he was young. His dad taught him to drive and maintain it, and they bonded over the shared experience. Shank still enjoys driving down the dirt roads and off the beaten paths of the American Southwest, and to hear him speak of it, he wouldn't trade in his Jeep for anything in the world. Watch his story unfold in the eight-minute video clip above to see what an enduring icon looks like. News Source: Petrolicious via YouTube Jeep SUV Off-Road Vehicles Classics Videos petrolicious willys

2015 Jeep Renegade Trailhawk [w/video]

There are two avenues to the world of off-roading. Arguably the more popular is to pick up a second- or third-hand Jeep, Land Rover or pickup truck and go wild with the aftermarket. The opposite approach, though, is to simply buy new, which brings a warranty along with the most up-to-date off-road tech fitted by the factory (despite likely lacking the ultimate capability of an aftermarket-imbued vehicle). That second option has, traditionally, been pricey. Take our long-term Jeep Cherokee Trailhawk, which rings up at just over $38,000. A Ford F-150 SVT Raptor is going to be an even more expensive proposition, while the undisputed kings of luxury off-road performance from the factory – the Range Rover, Toyota Land Cruiser and Mercedes-Benz G-Wagen – will require ownership of a medium-sized oil well. With all due respect to those who take their Trail-Rated Jeep Patriot models off-road, the all-new Renegade Trailhawk is such an exciting proposition because it brings the cost of a warranty-backed off-roader down significantly, while also delivering a degree of trail-rated performance that should easily fulfill the needs of the average enthusiast. Drive Notes Before we get into what it adds, it's worth noting that the Trailhawk trim does have a small impact on the Renegade's on-road abilities. As we said in our original feature, the TH adds a significant amount of weight to the standard CUV, as it tips the scales at nearly 3,600 pounds. That mass, combined with the slightly higher stance, means the off-road model doesn't handle quite as well as a lesser Jeep. It also doesn't feel as fleet of foot, as it retains the same 2.4-liter, 180-horsepower four-cylinder and nine-speed automatic found throughout the Renegade range. Despite the downers, the Trailhawk trim does bring quite a lot to the Renegade package, most notably in the form of a bespoke version of Jeep's Active Drive all-wheel-drive system. The upgraded system features a dedicated 20:1 crawl ratio while the Selec-Terrain system is home to a new Rock setting. Beyond that, Jeep lifted the Renegade's ride height eight-tenths of an inch, increasing overall ground clearance to 8.7 inches and delivering 8.1 inches of wheel articulation. This is complemented by unique front- and rear-fascias, which up the approach and departure angles to 30.5 and 34.3 degrees, respectively, besting the Cherokee Trailhawk's 29.8 degrees and 32.1 degrees.

Chrysler to accelerate production of 2013 Ram and V6 engines

Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.