2011 Jeep Wrangler on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

2018 Jeep Wrangler will have an aluminum hood and doors, leaked memo says

Earlier this year, FCA CEO Sergio Marchionne revealed that 2018 Jeep Wrangler would feature a heavy dose of aluminum, though he didn't specify how. Now, JL Wrangler Forums says the Wrangler will use the material for the hood and the doors, citing an internal bulletin from aluminum supplier Alcoa. According to the forum, the company says the next-gen Wrangler will utilize Aloca's C6A1 (an internal name) high form alloy. The SUV will also get 6022 and A951 from Alcoa that will be used on the SUV's front and rear doors, as well as for the hood. Alcoa's C6A1 is the company's new high form alloy, while its 6022 alloy sheet can be found on things like a car's hood, door, or closure panels. Alcoa's A951 is the company's pre-treatment aluminum sheet bonding technology that it uses on automobiles. "A team in the Farmington Hills (Michigan, USA) Aerospace and Automotive Products group is leading a new profitable growth opportunity with the 2018 Jeep Wrangler program. The next generation Jeep becomes the first to utilize our C6A1 high form alloy; we are currently the only supplier of this high form product. Alcoa will also supply 6022 and A951, including front and rear door inners, hood outer and inner." As Marchionne pointed out earlier this year, the 2018 Wrangler won't be made entirely out of aluminum. So Alcoa's contribution to the upcoming SUV's doors and hood could be the only components that use the lightweight metal – or Jeep could be using another aluminum supplier for other parts. Large changes lie ahead for the 2018 Wrangler, which include a pickup version, new engines, and aluminum. But we do know that the next Wrangler is that it will be built in Toledo, OH, as FCA announced plans to spend $1.05 billion to retool the Wrangler factory, while also adding another site in Illinois earlier this year. Related Video:

Jeep Patriot replacement adopts tiny Grand Cherokee styling

After almost a year out of the spotlight, we've finally snagged our second set of images of Jeep's new CUV. Set to replace both the Patriot and Compass, these latest images reinforce what we originally thought about Jeep's newest model – it's a baby Grand Cherokee. These 15 images provide the best look yet at the new sheetmetal, details, and interior. Starting with the skin, it's like Jeep's designers scaled down the Grand Cherokee's profile to fit on the new crossover's stretched Renegade platform. The headlights, grille, and taillights looked like shrunken items from Jeep's flagship crossover, too. This is good news – even after its 2011 facelift the Compass was a homely little thing, and the Patriot was boxy at a time when CUVs were going for smoother, more aerodynamic lines. Jeep's new CUV is avoiding those mistakes by aping one of the company's most popular designs. Only the driver's seat, steering wheel, and center stack appear in the interior images, so we can't tell how the stretched chassis impacts rear-seat legroom compared to the Renegade/Fiat 500X. But in front, it looks like a Jeep – FCA's corporate steering wheel and HVAC controls are present and accounted for, but the usual touchscreen display looks bigger the expected 8.4-inch unit. That could just be the camera angle playing tricks on our eyes. We can't make any judgments about the material choices, but we'd expect quality to be on par with the larger Cherokee. Under hood, our spies report that FCA's nine-speed automatic will be the only transmission choice. FCA will call on its new 2.0-liter, Hurricane four-cylinder engine, the spies claim, but we also expect the less powerful 2.4-liter, four-cylinder from the Renegade and Cherokee. Apparently, production will begin by the end of the year. Short of a shotgun launch immediately after a Detroit debut, that virtually guarantees a debut in Los Angeles (or possibly Paris). Related Video: Featured Gallery Jeep C-Segment CUV: Spy Shots View 15 Photos Image Credit: CarPix Spy Photos Jeep Crossover Off-Road Vehicles jeep compass jeep patriot