Jeep SRT8, page #22

Auto blog

Baby Jeep to join Renegade in FCA's plan for new Italian-built models

FCA is boosting its European production, introducing new models that will be built in currently under-utilized manufacturing facilities. Among the new models is a new small Jeep, smaller than the current Renegade, as Automotive News reports. FCA's Mike Manley mentioned the entry-level Jeep model earlier this year, also saying that the vehicle is targeted to European and possibly Latin American customers; in the summer, Autocar placed the launch date in 2022. The new "baby" Jeep would be made in the same factory in Pomigliano, Italy, as the small Fiat Panda, which is a top seller in Italy. The current generation Panda was introduced in 2011; if it gets a replacement in 2022, it could possibly share a platform with the Jeep model — or, the Jeep could be an eventual outright replacement for the Panda. One of Fiat's earlier core products, the Punto hatchback, was canned in August, and that production capacity will be used to make the Jeep Compass instead, at the Renegade-producing Melfi factory in southern Italy. The Compass has not previously been built in Europe. The Fiat model portfolio would be shrunk to just the 500 model family and the Panda — the 500 would also be FCA's key electric vehicle offered in Europe. It is not yet clear whether the electric 500 would be made in Turin, Italy, or in Poland; Turin might also get a Giardiniera-badged wagon version of the refreshed 500. As for the Alfa Romeo brand, it is set to gain an even bigger SUV model than the Stelvio, based on the Maserati Levante's platform. The Levante's sales have suffered recently in China, but Maserati does have light in the horizon: The Alfieri 2+2 grand tourer is still in the cards, with a launch expected for 2020 and both a convertible and an electrified version planned to follow. The Alfieri would be made in Modena, Italy, according to Automotive News' sources. None of these plans namedrop the storied Lancia brand, which has been shrunk to just the Ypsilon hatchback, based on the same platform as the current 500 and Panda. Despite that, the Ypsilon was again the second-bestselling car in Italy after the Panda in October. It is unlikely that FCA will be able to ignore this, but it is just as unlikely that any development money will be afforded to come up with a replacement for the Ypsilon, which is as similarly old as the Panda. Perhaps official announcements expected on Thursday will also clarify what will happen to Lancia.

Gladiators, Pilots, and Palisades, plus a couple boring crossovers | Autoblog Podcast #562

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Consumer Editor Jeremy Korzeniewski. The duo discuss the leaked Jeep Gladiator, Ford's Baby Bronco, the Aston Martin DBX, and then touch on other reborn names like the Honda Pilot. They also discuss how boring crossovers have taken over as the family car of choice in the United States and debate the merits of turbocharged V6 engines versus the classic American V8. Finally, we spend your money.Autoblog Podcast #562 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Jeep Gladiator leaked Hyundai Palisade and Honda Pilot teased Aston Martin DBX Ford Baby Bronco leaked Boring crossovers Ford F-150 2.7-liter EcoBoost Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: Podcasts LA Auto Show Aston Martin Ford GMC Honda Hyundai Jeep Truck Crossover SUV honda pilot jeep gladiator aston martin dbx hyundai palisade ford baby bronco

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Steve McQueen's U.S. Army Willys Jeep is up for auction

It's not a Bullitt Mustang, but this World War II Willys Jeep up for auction was still owned and driven by the famous Steve McQueen, and it could now be yours. Heading to the block with Silverstone Auctions, this 1945 Willys was bought directly from the U.S. Army by McQueen himself. The Willys was sold in 1984 as part of the Steve McQueen Estate Auction for a whopping $6,000, and then sold to its current owner some undisclosed amount of time after that. Currently, the Willys resides in the U.K. where it was completely restored to the state it would have been in during McQueen's ownership. The restoration process was completed by the Jeep experts at Jeeparts. It comes with a certificate of authenticity from the Steve McQueen Estate Sale to ensure its legitimacy. Silverstone Auctions is predicting a final hammer price of $105,00 - $131,000. That's pretty exorbitant for an old Willys, but there's certainly been a bit of excitement around the late actor here recently. Bonhams just auctioned off some old motorcycles owned by McQueen, and Ford has finally brought the Bullitt Mustang back to the market. If you're a fan with a little (or a lot of) extra change in your back pocket, this looks like a perfect way to have some off-road fun in a car with some seriously special history. The auction is taking place Nov 10-11 near Birmingham in the U.K. Related Video:

2018 Jeep Wrangler Rubicon Alaska Cannonball | At the edge of the Arctic Ocean

Our man Jonathon Ramsey is driving a Jeep Wrangler Rubicon on a 14-week, 14,000-mile journey across North America. Check out his first, second, third, and fourth installments. TUKTOYAKTUK, Alaska – The picture above merely hints at the magic turn the Rubicon Alaska Cannonball took after Port Orford, Oregon. The three dramatis personae are Shelby, on the right, an Inuit and Tuktoyaktuk local with a supernova smile, sitting on the hood of her 2014 Wrangler; Jason, a top Canuck who rode his BMW up from the Lake Louise area, takes the middle; I'm on the left, wearing an Inuit parka lent me by Shelby's father, John Steen. The parka, full of snow goose down and lined with wolverine fur, is the nicest piece of winter gear I've ever put on. Any kind of winter gear. Ever. We're effectively in John Steen's back yard, the sun setting on the Arctic Ocean behind us, pingos – earth-covered mounds of ice that Tuk is known for – in the background. I took this picture at the beginning of a long night of laughs, learnin', beer, whale, Northern Lights, extraordinary kindness, more laughs, followed by a long sleep in a man cave garage. But let's pick up right after Oregon. I drove to Seattle to regroup after the Trans-America Trail and visit a Jeep dealer for an oil change, tire rotation and balance, and a thorough inspection. For reasons neither Jeep nor I could understand, the dealer wouldn't do anything more than change the oil. The Jeep rep couldn't make the dealer budge. The punchline: as I left the service department, the service writer I dealt with turned to his colleague and said, "Another happy customer." My head exploded. And then I made an appointment at a Jeep dealer in Fairbanks, Alaska to complete the work. Google said Fairbanks lies 2,145 miles from Seattle. I wanted to be in Fairbanks in three days, so I hit I-5 north determined to chalk up 715 miles. Instead of taking the Alaska-Canada Highway (the AlCan), I turned left at Prince George to take the Cassiar Mountain route, and clocked about 830 miles before pulling into a rest stop in New Hazelton. That first day would be the only one on schedule. I don't know how Canada has managed to keep this a secret, but the western provinces are shockingly gorgeous. One of Canada's tricks: California's 163,707 square miles host 39.5 million people; Canada's 3.855 million square miles house 35.2 million people.

Fiat Chrysler prepares to produce plug-in hybrid Jeep Renegade

MILAN — Fiat Chrysler (FCA) said on Monday it's preparing to begin production of a plug-in hybrid version of the Jeep Renegade as the carmaker pushes ahead with its electrification drive to meet tougher emissions rules. The world's seventh-largest carmaker said in June it would invest 9 billion euros ($10.3 billion) in electric and hybrid cars over the next five years to become fully compliant with emissions regulations across regions. It also pledged to phase out diesel engines in European passenger cars by 2021. The Jeep Renegade plug-in hybrid, expected in the market in early 2020, will be produced at FCA's Melfi plant in southern Italy, which is already churning out the combustion engine version of the model and the Fiat 500X crossover, FCA said. More than 200 million euros will be spent on the new engine, the company said, adding workers would be retrained for the new technology and the plant modernized. By 2022, FCA plans to offer a total of 12 electric propulsion systems, including battery electric vehicles (BEV), plug-in hybrids (PHEV) and full hybrids, it said, adding 30 different models would be equipped with one or more of these systems. Former FCA Chief Executive Sergio Marchionne had long refused to embrace electrification, saying he would only do so if selling battery-powered cars could be done at a profit. He even urged customers not to buy FCA's Fiat 500e, its only battery-powered model, because he was losing money on each sold. But Tesla's success and the need to comply with tougher emissions rules forced Marchionne to commit to what he used to refer to as "most painful" spending. Marchionne died unexpectedly in July after succumbing to complications from surgery, but his successor, Mike Manley, vowed to continue the strategy laid out in June. ($1 = 0.8719 euros) Reporting by Agnieszka Flak

Jeep readying 2018 and 2019 Wrangler recall for bad frame welds

According to documents posted to the JL Wrangler Forums, Jeep is readying a recall for an unknown number of 2018 and 2019 model-year Wrangler SUVs. The issue revolves around the track bar mount, which on some vehicles is shearing off where it is welded to the frame. Since some affected vehicles may be unsold on dealer lots, the automaker has issued a corresponding stop sale. A Jeep spokesperson confirmed to CNET that there have been no reported accidents related to the issue, and Jalopnik reports that Jeep will inspect roughly 18,000 vehicles for the defect, though it believes only around 720 will be affected. As of the time this story was published, the National Highway Traffic Safety Administration had not yet posted this recall to its website. There have been a total of five recalls for the 2018 Jeep Wrangler, including one for a steering shaft that could separate due to improper welding. One 2018 Jeep Wrangler owner in North Carolina posted a video to YouTube, seen above, showing track bar mounts that have completely sheared away from the vehicle's frame. These broken welds may cause severe steering degradation and "can cause a vehicle crash without prior warning," according to a dealer notice that was posted to the JL Wrangler Forum. That owner has said Jeep is replacing his Wrangler, but it's not clear if other vehicles are being replaced or repaired. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Jeep Renegade gets new turbo engine and new styling

We told you about the European-spec 2019 Jeep Renegade in June, but today we have the low-down on what the U.S. can expect from the refreshed crossover. New for 2019 is a 1.3-liter turbocharged four-cylinder engine that makes 177 horsepower and 200 pound-feet of torque. That means the 1.3-liter boosted four is actually more powerful than the outgoing 160 horsepower 1.4-liter. This engine will be standard on Limited and Trailhawk models but optional on the Sport and Latitude — those cheaper trims will get the carryover 2.4-liter naturally aspirated four-cylinder engine standard. If you option the 1.3-liter, it'll come with stop-start tech as well. Regardless of engine choice, you'll be getting a nine-speed automatic transmission because the existing six-speed manual is MIA for 2019. As a refresher from what we learned before, the Italian-built Jeep crossover gets new front and rear fascias plus new wheel designs to differentiate it from 2018. You can even get 19-inch wheels on Latitude and Limited trims. An available full LED lighting package brings LED headlights, daytime running lights, fog lamps and taillights. Driver assistance features including adaptive cruise control, parallel/perpendicular park assist and front parking sensors are optional as well. There aren't any pictures of the new colors yet, but you can get Slate blue, Sting grey and Bikini paint on your Renegade ... interesting name choice on the last one. Of course, the Renegade will be offered in both front-wheel and four-wheel drive, with the Trailhawk being the most capable of the bunch off-road. Jeep hasn't released official fuel-economy numbers for the 1.3-liter turbo, but it says the smaller engine and active grille shutters should yield an improvement over 2018. Pricing and availability remain a mystery, but we don't imagine it'll be much longer until that information is available. Featured video:

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.

2018 Jeep Wrangler Rubicon Alaska Cannonball | Oregon is on fire

Our man Jonathon Ramsey is driving a Jeep Wrangler Rubicon on a 14-week, 14,000 mile journey across North America. Check out his first, second, and third installments.Port Orford, Ore. – On arrival at Battle Rock, just off the southern coast of Oregon, I had completed the (other) Trans-America Trail. It's a worthy Bucket List endeavor even before you get to the bits that challenge a Jeep Wrangler Rubicon. The first tests came in western Oklahoma, tiptoeing through and around swampy farmland. Once I got to Colorado, the difficulty scale increased with each day's driving. By the time I hit wildfires and constant detours in Oregon, I was ready for the trail to end. Here are a few more notes from the last half: When I filled up in Columbia, North Carolina just before getting to Oregon Inlet, the odometer showed 12,294 miles. When I filled up in Port Orford before heading north to Seattle, the odo read 18,008, for nearly 6,000 miles in three weeks. GPSKevin says his trail covers 5,184 miles, but detours are an unavoidable part of the experience. Utah wins my vote for the widest variety of beauty. Crossing into southeastern Utah from Colorado, the landscape is full of desert farms and endless visibility to mountains at the ends of the Earth in Monticello. It's plush high plains greenery on the way up and down Geyser Pass, then the rocky red pioneer-killing cauldron of The Spanish Valley and Moab. Scrub-filled rock formations stretch to Salina, then back up to verdant forests in both halves of Fishlake National Forest. A final rocky stretch west of Sevier, Utah fell into a rolling golden land past Black Rock, another trip into sparer mountains, then the final comedown to Baker, Nevada. Moab gets all the Jeep love, but there's plenty of fun all over the state. In Ely, Nevada I met a Harley rider headed east out of Oregon who told me, "It's all on fire. Whole state. On fire." The haze began not long after leaving Ely. By the time I departed Battle Mountain, Nevada hills showed their own scorched-earth scars, and science-fiction gray skies hid entire mountain chains. Detours were already longer and lengthier in the West because of closed roads, locked gates, and "No Tresspassing" signs. Now fire-centric detours and turnarounds joined the routine. The last day on the trail in Oregon, a 114-mile route from Glendale, through the Rogue River Siskiyou National Forest to Port Orford, was the hardest.