Jeep Grand Cherokee Laredo on 2040-cars

Auto blog

2018 Jeep Grand Cherokee vs. midsize crossovers and SUVs: How they compare on paper

In a world full of SUVs and crossovers all competing for similar buyers in similar segments, there are still some models that find their own little niches that lack such fevered fighting. The Jeep Grand Cherokee is one of those vehicles. It's an oddball in the sense that it's a midsize crossover SUV with a unibody chassis and independent suspension, but it still uses rear-wheel-drive and four-wheel-drive systems and has some off-road capability. It's also a midsize crossover, but only offers two rows of seats. Despite the Grand Cherokee's odd nature, we did come up with a few crossovers and a classic SUV that seem to match the Jeep in size and pricing. We looked at the numbers to compare them on paper. You can find the raw data in the chart below and deeper analysis after that. As always, this is just a comparison of specifications and you'll want to check out our driving impressions of each car if you're getting serious about one or all of these vehicles. And if you want to compare any of these against other vehicles, be sure to check out our comparison tool. Engines and Drivetrains When comparing base engines, the Jeep Grand Cherokee's 295-horsepower is the clear power winner, beating the next most powerful 4Runner by 25. But in torque, the 4Runner takes the laurels with 278 pound-feet, narrowly edging out the Edge's (no pun intended) turbocharged 2.0-liter four-cylinder's 275. That four-cylinder in the Edge will also be picking up another 5 horsepower for 2019, but it still won't win this power contest. Both Ford and Jeep also have another advantage in the fact that you don't have to settle for the base powertrain. Ford has two other engine options, a naturally aspirated V6 and a twin-turbocharged V6, the latter of which outguns the Grand Cherokee's gasoline V6 in both power and torque. That engine will also be bumped up to an impressive 335 horsepower and 385 pound-feet of torque. View 20 Photos The Jeep has the most engine options, though, and it's the only to offer V8 and diesel options. On most Grand Cherokees, the options include a 5.7-liter V8, which is only available with 4WD. It makes 360 horsepower and 390 pound-feet of torque, outperforming even the 2019 Edge's twin-turbo V6. The diesel engine doesn't make much power with just 240, but it makes up for it with torque at 420 pound-feet. And of course there are the SRT and SRT Trackhawk models with even bigger and supercharged V8 engines respectively.

2013 Jeep Wrangler Moab Edition

There will forever be a soft spot in my heart for the Jeep Wrangler. The last one I owned was red, and, as a 1990 model, had the square headlights derided by Jeep enthusiasts who grew up on the Civilian Jeeps that descended from their General Purpose military ancestors. As a teenager, I couldn't have cared less what shape its headlights happened to be - to me, a Jeep Wrangler represented freedom; a carefree do-it-all machine equally at home with the top stowed away in the summer or with the heater on full blast in the snowy clutches of Old Man Winter. In Dr. Seuss parlance, my square-headlighted Sneetch was just as worthy as any round-headlighted Sneetch.
All that said, I'll be the first person to advise against buying a Jeep Wrangler of any sort for owners who don't plan to use it as its makers intend. There's no good reason to punish yourself with a stiff and springy ride, a loud and somewhat drafty (though generally water-resistant) interior or the poor fuel economy expected of a block-shaped vehicle if you don't enjoy its other, more exciting benefits.
Of course, Jeep has done its darndest over the years to make the Wrangler as civilized as possible while keeping it as capable as federal law will allow. The 2013 Jeep Wrangler Moab edition is one of Jeep's latest attempts to attract attention from the upper reaches of the active lifestyle set, and I spent a week with one to see what makes the Moab special.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.