Jeep Grand Cherokee 4xe, page #23

Auto blog

2018 Jeep Wrangler scores 1 star in European crash tests

The Jeep Wrangler got a full redesign for the 2018 model year, and this Euro NCAP test we have here is the first official independent safety testing we've seen for the new model. Historically, the Wrangler has performed poorly in crash tests. The U.S. National Highway Traffic Safety Administration awarded the previous generation a three-star rating. Euro NCAP testing puts a lot more weight on driver assistance systems in its testing, an area where the new Wrangler is somewhat lacking. It lost points for not having things like automatic emergency braking and lane-keep assist — the Wrangler doesn't offer either of those things in Europe, even as an option. However, the 2019 model year Wrangler does (2018 does not) offer active braking for the U.S., a $795 package gives your Wrangler the ability to brake itself to a full stop if it senses the risk of a collision. This package includes adaptive cruise control, too, but lane-keep assist is not available. On top of the lack of active driver safety systems, its performance in NCAP's impact testing left a bit to be desired, as well. We did the math to see the raw Euro NCAP scores for a crash without it being dragged down by the driver assistance systems, and adult occupant safety came out to 56.7 percent. Child occupant safety was a tad better at 69 percent. These still aren't great numbers, so it's clear that the lack of driver assistance features isn't the only thing pulling the score down. We aren't particularly surprised by the Wrangler's numbers, but it's information potential buyers should know about the truck. For those wanting an even deeper dive, check out Euro NCAP's full testing results here. The Euro NCAP also released a video of its Jeep Wrangler crash testing, which you can watch above. None of it looks particularly egregious at first blush, especially compared to video of the Fiat Panda, which recently received a whopping zero star rating. Scoring zero stars in a crash test is always a red flag, but customers won't ever buy the Panda in the U.S. anyway. We'll be watching for crash test ratings from the NHTSA and the Insurance Institute for Highway Safety for U.S. market 2018 Wranglers to see if those tests produce different results. Related video:

Mahindra vs. FCA case rages on amid confusion from false reports

The Mahindra vs. FCA case is trucking on despite some reports from India that say otherwise. It was widely reported over the weekend that Mahindra had come out on the winning side of the U.S. International Trade Commission's investigation. However, that's not the case, and FCA says it expects a final decision to be made this month. Apparently, the reports used a brief filed by Mahindra that doesn't actually have any bearing on what the final decision in court is. The briefing was rather explicit in its language, but FCA released a similar brief following hearings. We'll list them both for you below. Mahindra: "FCA is contractually barred from pursuing this investigation if Mahindra's vehicles contain or use the approved grille design. The evidence shows that Mahindra's Roxor uses the approved grille design. Thus, the record supports a finding that Mahindra met its burden of proving by a preponderance of the evidence that FCA is contractually barred from pursuing this investigation." FCA: "Mahindra has failed to carry its burden in showing that all of FCA's claims fall under the narrow scope of the 2009 Agreement. The Investigation against Respondents should therefore proceed." These statements represent opinions of both companies, but not actual decisions made by the U.S. ITC. In case you were still wondering, this whole battle is about the Mahindra Roxor's front grille design. FCA says is looks too much like a Jeep, and is worried the Roxor will cut into Wrangler sales. The Mahindra Roxor isn't road-legal, which would make it difficult to steal actual Jeep sales from FCA, and there was also an agreement signed in 2009 between the two companies related to this issue. FCA agreed then not to bring about infringement claims against Mahindra as long as it used a grille design that differs from the classic Jeep trademark grille FCA approved of. One could argue Mahindra's grille is different than Jeep's design because it only has five slats instead of seven, but it sure does look a lot like an old Willys. It will be another month before official word is out on this case, and we'll be following to see whether Mahindra will be allowed to sell its fun, diesel off-roader in the U.S. Related video:

Alfa Romeo will gain a Jeep Compass-based SUV

It was reported earlier this week that FCA would invest into its Italian factories to ramp up production at currently underutilized locations. Those plans have now been clarified with official information from FCA, as reported by Automotive News. The entire investment is worth $5.7 billion. First of all, Alfa Romeo will gain a new compact SUV based on the Jeep Compass architecture. The still-unnamed model will be available as a plug-in hybrid, and it will be built in Pomigliano, Italy. No U.S. availability has yet been announced, but it would not be odd to see the Compass-based model sold below the Stelvio in the States. The last time Alfa Romeo had anything similar in its model portfolio was when it offered Crosswagon-badged four-wheel-drive versions of the 156 and 159 wagons. As for the Jeep Compass itself, it will begin to be built at the Melfi plant in Italy. The rumored small "baby" Jeep slotting under the Renegade has not yet been officially mentioned. Fiat will introduce a battery electric 500, built in Turin, and the Pomigliano plant that will make the compact Alfa Romeo SUV will also be used to build a mild hybrid version of the Panda city car. The 500X will gain a PHEV variant. The Stelvio platform will also spawn a corresponding SUV for Maserati, and FCA also mentioned Maserati will introduce a new, unnamed model it will make in Modena. Automotive News quotes Italian press as saying this will be the Alfieri coupe and convertible, also offered as battery electric versions. Related Video:

2020 Jeep Gladiator has lots of Mopar parts ready for launch

The 2020 Jeep Gladiator is here, and we've only had to wait a day to see how you can modify it with official Mopar parts. Some of the parts that will be available were already fitted to one of the Gladiators on the floor at the L.A. Auto Show. Jeep Wrangler owners aren't shy at modifying their beasts, and we can probably expect the same amount of enthusiasm from those who own the Gladiator as well. Many of the Mopar parts will be available right as the Gladiator goes on sale. Let's hope the best ones, like the 2-inch lift kit, rock rails and tube doors, make it there for launch. The steel tube doors sure give the Gladiator more character than other trucks on the market. Off-road LED lights, winch-capable steel bumpers and 17-inch beadlock-capable wheels should enhance its off-roading capability. Different storage solutions are also included in the available parts like bed-mounted cross rails, ramps, roof rack/carriers and tonneau covers. If you wanted your Jeep truck to look different from the rest, Mopar is offering side graphics, hood graphics and Katzkin leather seats. A cold air intake and Mopar catback exhaust are the only two power modifications available at the moment. Jeep claims they add power and torque but don't give any figures. Those are just the highlights as far as accessories go. FCA says there will eventually be over 200 different parts available. If you want more Gladiator news, we've got you covered. Check out the full details on the pickup here, and more background on the truck's name and purpose here. Related video:

2018 L.A. Auto Show: 5-plus takeaways on Jeep, Honda, Porsche and more

The 2018 L.A. Auto Show is making a strong case that auto shows aren't dead. Carmakers are ladling out sports cars and SUVs featuring serious style and performance in Los Angeles, and it's a feast for the senses. We're talking the new Porsche 911, the long-awaited Jeep Gladiator and the stylish Mazda3. It's the best car show with the most important reveals since the 2018 Detroit Auto Show kicked off the year. Here are some quick reactions: The 2019 Jeep Gladiator is a rock star When the story went live on Autoblog, our traffic went straight up. I've literally never seen the graph go straight up. So yeah, you guys seem to like it. I do, too. It's everything I want in a vehicle, including enough of a retro feel that it satisfies my cravings for an old Cherokee XJ. It's more capable and likely more expensive than I originally anticipated, but Jeep is going to have to expand its Toledo factory to keep up with demand. Don't be fooled by whatever the politicians say when that happens. It's because people like Jeeps and pickups, and this is the hero sandwich of all of that. I'd likely go with the 3.6-liter and a manual transmission if I were buying a Gladiator, but the diesel is compelling, too. Gladiator is a great name, drenched in history. I like it better than Scrambler, which never felt right to me. Only issue: It's a little over-the-top. Imagine this conversation: "So, ready to go to Panera?" "Sure, let's take the Gladiator." I mean, it's a bit much to refer to your personal vehicle as the Gladiator. Unless Russell Crowe is driving it. Then it's fine. The 2020 Porsche 911 is conservatively brilliant Every time I drive a 718 Cayman, Jaguar F-Type or another 911 challenger, I wonder if the 911 may be over the hill. It's not. And it likely never will be. This latest generation, dubbed 992 in Porsche-speak, stayed the course. The back takes some Mission E stylings that give the 911 a more modern feel. The flat six gets a little more power. The digital-heavy interior looks futuristic and slick. But overall, it's a blocking-and-tackling update that should satisfy the purists and maybe draw in a few new Porsche fans. It's the right time for the 2019 Honda Passport This slots between the Honda CR-V and the Honda Pilot. That's serious segmentation, but it's another crossover, and it's undoubtedly what the people want.

Why the 2020 Jeep Gladiator isn't called a Scrambler

After years of development and constant digging by spy photographers and forum users alike, there wasn't a whole lot surprising about the 2020 Jeep Gladiator reveal. But one thing that was a bit unexpected was the name. While never officially announced, the Internet had accepted the name Scrambler for the Jeep pickup and it was referred to as such until just before the reveal. There are reasons for the Gladiator name choice. Jeep representatives explained that one of the reasons for the choice of Gladiator is because of the Jeep Gladiator concept truck from 2005. That concept led to many rumors of a Wrangler-related pickup truck, and you can see some design influence from it on the current truck. Of course the concept was just a two-door extended-cab pickup. Also, besides the concept heritage, the Gladiator name was shared with the longest-running Jeep pickup truck line, the Gladiator and J-Series. The Jeep folks also noted that they wanted to avoid the Scrambler name because they felt the old Scrambler wasn't enough of a full-on truck, and the company wanted to emphasize that the new Gladiator is a true truck designed to be a truck. The original '80s Scrambler was effectively a stretched CJ-7, and practically called CJ-8, with a longer cargo area. It was mainly a truck because it was available with a half-cab top. But it was also available for a full-length wagon top eventually. So the Scrambler was more related to the first Wrangler Unlimited, which was a stretched two-door Wrangler, than to the new Gladiator, which has a unique frame, unique rear suspension and a separate bed and cab. If we're being honest, we don't think the Scrambler name would have been a problem. It's clear that Jeep fans are very fond of the name, and it would fit the idea of a Wrangler truck. But we also certainly don't have a problem with the Gladiator name either. It's equally historic, and even if it wasn't, it sure sounds great, evoking toughness and capability. Perhaps if people are really bothered by the truck not being called Scrambler, Jeep can roll out a graphics package as a tribute to the old models. Related Video:

Jeep Gladiator was designed as an outdoor lifestyle tour de force

LOS ANGELES — It's been more than 30 years since the last Jeep Wrangler-based pickup went out of production. And it's been more than a dozen years since a modern Jeep Wrangler-based pickup concept first taunted us with its chunky bed-shaped behind. But today, America's signature off-road brand has finally unveiled the production version of a Jeep Wrangler-based pickup. And it looks, rather predictably, like a four-door Jeep Wrangler with an open box in the back. (From some angles, it also looks like a Jeep that is towing itself.) "There were some key drivers that the designers had to work around," says Timothy Kuniskis, head of Jeep North America. "We wanted to not just go after Wrangler buyers, but after truck buyers. So this vehicle had to have four doors, four real doors. But the big thing was the bed. We know our consumer, the one who will be interested in this truck, and for them, it had to be the width of an ATV and the depth of two dirt bikes, so that dictated the size of the bed." This new trucklet is called the Gladiator, which is a departure from the name of the previous Wrangler-based pickup, the Scrambler. The Gladiator name does have Jeep heritage, having been the moniker of the full-size truck the brand sold from the mid-1960s to the early '70s. Since nomenclature is key in defining product and perception, we would be remiss if we did not note the key semantic differences between the names. A Scrambler is a go-getter (or resolutely confusing.) A Scrambler is nimble and scrappy. A Gladiator, on the other hand, is about vanquishing and conquest, and is typically gigantic. A Gladiator is domineering. Having only seen the photos, it was difficult to tell how big this thing is. Luckily, we've now seen it in person, and it is indeed big, but not huge. "It's a midsize pickup, a segment that is exploding now. Tacoma is and has been the dominant player in the category, but with GM coming back in and the Ranger joining soon, and now us, we're going to see this category get to 500,000 units a year very soon," says Kuniskis. "Everything that psychologically drives a consumer to a Wrangler, there's a sub-segment of those buyers whose needs push them toward a pickup. These aren't people who are going to fill the bed with mulch and boulders. It's not a work truck. It's absolutely a lifestyle choice. These are people who are into surfing, mountain biking, dirt bikes, side-by-sides." Jeep is in an interesting position from a design perspective.

2019 Chevy Blazer vs Honda Passport, other midsize crossovers: How they compare

The two-row midsize crossover market is a sizable one that just keeps growing. The two newest additions being the 2019 Chevy Blazer and the 2019 Honda Passport, additions we just recently drove. As such, it seemed like a good time to see how their numbers compare with the veterans of the segment: Ford Edge, Jeep Grand Cherokee, Hyundai Santa Fe and Nissan Murano. In this comparison to see where it lands in the numbers game, we'll take a look at everything including power, torque, towing, ground clearance, passenger room, cargo space, fuel economy and pricing. Cue the chart. Powertrain The Passport only has one engine option, Honda's trusty 3.5-liter V6. You can find this engine in both the Pilot and Ridgeline, and we like it in all its applications. But if you're looking for something more affordable or more frugal, you're out of luck. The Passport is one of just two that offer just one engine option. Most of the others have two choices, and Jeep even offers three. Compared with similar engine options, the Passport is pretty middling. The Ford Edge ST's turbo V6 makes the most power and torque at 335 ponies and 380 pound-feet. Next up is the Blazer, the only other to break 300 horsepower, and then the 295-horsepower Grand Cherokee. The Passport does beat the V6 Murano and the turbocharged Santa Fe, though. 2019 Chevrolet Blazer View 37 Photos For vehicles with smaller engines, the Edge wins again with its 250-horsepower turbocharged four-cylinder. The Chevy Blazer is next, but at 193 horsepower, it's barely ahead of the 185-horsepower Santa Fe. The Jeep Grand Cherokee has a couple of powertrain aces, though. It's the only vehicle available with a V8, and it makes an impressive 360 horsepower and 390 pound-feet of torque. There's even a turbodiesel model with 240 horsepower and 420 pound-feet of torque, the most twist of the group. The Grand Cherokee is also the choice if you want to tow much. The V6 models will pull 6,200 pounds, and the V8 and diesel can handle 7,200 pounds. Add 200 more pounds to the diesel if it only has rear drive. 2019 Honda Passport View 19 Photos When it comes to fuel economy, the front-drive four-cylinder Edge and Santa Fe are tied for the best, with the all-wheel-drive Edge getting one more mpg on the all-wheel-drive Santa Fe on the highway. The Murano comes up next.

2020 Jeep Gladiator pickup revealed: class-leading towing, diesel option, much more

Even though we've all pretty much seen the Jeep Gladiator, it's still exciting to finally see the officially unveiled pickup truck. And it does indeed look like a simple Wrangler pickup. It has fully removable soft and hard tops, doors and a folding windshield. The doors are the same as the Wrangler Unlimited's. It has round headlights, chunky fender flares and nearly the same interior. But it's more than that, blending much of the beloved SUV with some unique features for the pickup truck. For starters, the Gladiator features a new frame not shared with Wrangler that's a whopping 31 inches longer than the one under the Wrangler Unlimited. The wheelbase of the Gladiator is also 19.4 inches longer than a Wrangler Unlimited. The Gladiator continues to use solid front and rear axles, both of which are Dana 44s in two available track widths, but the rear five-link coil suspension is a unique design developed for better ride quality. Propelling this chassis initially will be the 3.6-liter gasoline V6 from the Wrangler with either a six-speed manual or eight-speed automatic transmission. It makes 285 horsepower and 260 pound-feet of torque. In 2020, Jeep will start offering a 3.0-liter turbodiesel V6 that is a thoroughly redesigned version of the engine found in the outgoing Ram EcoDiesel. It's down in power compared to the gas engine at 260 horses, but it more than makes up for it with 442 pound-feet of torque. The only other diesel in this small to midsize truck segment is the Colorado and Canyon diesel trucks. Their diesel four-cylinder engines only make 181 horsepower and 369 pound-feet of torque. All Gladiators with either engine send their power through a selectable part-time four-wheel drive system. Fuel economy for either engine option has yet to be announced. On the subject of capability, the Gladiator has some impressive towing and payload numbers. Maximum towing capacity is 7,650 pounds. That's 150 pounds more than the next best gas-powered truck in this segment, the Ford Ranger. Maximum payload capacity is 1,600 pounds, which isn't the highest in the segment, but falls right in the range of the Ford Ranger and Chevy Colorado gas models. The bed is 5 feet long and is made of steel with an aluminum tailgate. It has various tie-down points and power outlets. Regarding the towing and payload numbers, it should be noted that the top towing capacity is only available on a Sport trim with the 3.6-liter V6, eight-speed automatic and 4.10 final drive ratio.

Baby Jeep to join Renegade in FCA's plan for new Italian-built models

FCA is boosting its European production, introducing new models that will be built in currently under-utilized manufacturing facilities. Among the new models is a new small Jeep, smaller than the current Renegade, as Automotive News reports. FCA's Mike Manley mentioned the entry-level Jeep model earlier this year, also saying that the vehicle is targeted to European and possibly Latin American customers; in the summer, Autocar placed the launch date in 2022. The new "baby" Jeep would be made in the same factory in Pomigliano, Italy, as the small Fiat Panda, which is a top seller in Italy. The current generation Panda was introduced in 2011; if it gets a replacement in 2022, it could possibly share a platform with the Jeep model — or, the Jeep could be an eventual outright replacement for the Panda. One of Fiat's earlier core products, the Punto hatchback, was canned in August, and that production capacity will be used to make the Jeep Compass instead, at the Renegade-producing Melfi factory in southern Italy. The Compass has not previously been built in Europe. The Fiat model portfolio would be shrunk to just the 500 model family and the Panda — the 500 would also be FCA's key electric vehicle offered in Europe. It is not yet clear whether the electric 500 would be made in Turin, Italy, or in Poland; Turin might also get a Giardiniera-badged wagon version of the refreshed 500. As for the Alfa Romeo brand, it is set to gain an even bigger SUV model than the Stelvio, based on the Maserati Levante's platform. The Levante's sales have suffered recently in China, but Maserati does have light in the horizon: The Alfieri 2+2 grand tourer is still in the cards, with a launch expected for 2020 and both a convertible and an electrified version planned to follow. The Alfieri would be made in Modena, Italy, according to Automotive News' sources. None of these plans namedrop the storied Lancia brand, which has been shrunk to just the Ypsilon hatchback, based on the same platform as the current 500 and Panda. Despite that, the Ypsilon was again the second-bestselling car in Italy after the Panda in October. It is unlikely that FCA will be able to ignore this, but it is just as unlikely that any development money will be afforded to come up with a replacement for the Ypsilon, which is as similarly old as the Panda. Perhaps official announcements expected on Thursday will also clarify what will happen to Lancia.