1969 Jeep Jeepster Commando on 2040-cars

Auto blog

Fiat Chrysler Automobiles recalls nearly 750k vehicles in two campaigns

Fiat Chrysler Automobiles is recalling a total of 747,817 vehicles in the US in two separate campaigns recently added to the National Highway Traffic Safety Administration database.
The first one covers about 434,581 units of the Chrysler 300, Dodge Charger, Challenger, Durango, and Jeep Grand Cherokee from the 2011-2014 model years with electric hydraulic power steering, the 3.6-liter V6 engine and a 160 amp alternator, according to FCA. In the affected vehicles, it's possible for the alternator to fail without warning and possibly cause the car to stall. According to the documentation submitted to NHTSA, the automaker began investigating the problem in August 2014 and has found possible evidence of one crash caused by the failures but no known injuries.
Customers will begin receiving notification about the recall next month, and obviously the repairs will be done at no cost to them.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

NHTSA investigating why Jeep recall fix is taking so long

Jeep's saga with the National Traffic Safety Administration and the voluntary campaign to repair 1.56 million vehicles for allegedly unsafe trailer hitches, is getting yet another chapter. The controversy appeared to finally be over in January when the automaker found a supplier for the replacement parts. Nothing is ever that easy, though, and the government regulator is now requesting documents from the company to clarify why the repairs are taking so long to begin.
Jeep parent company Chrysler has until July 16 to submit documents and answers to NHTSA explaining the situation. The regulator claims that despite its compromise to inspect and repair the models with improper hitches in June 2013, Chrysler didn't find a part supplier until December and didn't order the replacements until January. The government agency believes that the first components weren't manufactured until May of this year and vehicles may not actually be repaired until as late as August. According to the report, if the Chrysler doesn't supply what NHTSA is asking for, the agency could "take additional appropriate action as warranted."
Throughout this entire process, Chrysler has asserted that the vehicles met the applicable crash test standards of the time, and it has kept NHTSA abreast of the repair activity. In a recently released statement it said that the regulator analyzed eight rear impact reconstruction tests and found the replacement hitch to be safe. To keep up with the high demand for replacements, Chrysler is working with multiple suppliers, and they are running three shifts, six days a week to get the parts ready as soon as possible.