Se Coupe 1.8l Cd 6 Speakers Mp3 Decoder Air Conditioning Manual Air Conditioning on 2040-cars

Auto blog

2020 Hyundai Sonata shows fresh shape among competitors

The Hyundai Sonata received a refresh for the 2018 model year, but it seems that version won't be around for long, because a 2020 Hyundai Sonata midsize family sedan has been spied testing. The new car was spotted in Las Vegas testing alongside the competition. This new Sonata also appears to be a complete redesign, since nothing appears to be shared with the current model. Up front, the new Sonata looks much wider than the current model. Part of this is due to the headlights being moved to sit inline with the top of the grille, as opposed to slightly above on the current model. And while we can't see it clearly, the grille will likely have a similar shape to that of the current model and other Hyundais. The fenders also wrap around the top of the car more, further contributing to the car's wide stance. The profile of this new Sonata is different, too. It's a bit more traditional in how the engine compartment area doesn't blend into windshield as much. The current Sonata blends the engine, passenger and trunk compartments more. There's also a curve to the bottom of the greenhouse on the new car that lends the car a more graceful, less upright appearance. There is still a fastback look to the rear of the Sonata, but it's stretched out more, again helping the car look less upright. This is the first time we've seen the next-generation Hyundai Sonata, but it does look as though it's pretty far in development. What we can see of it appears to be production ready. As such, we probably won't have long to wait to see the car revealed. It will probably show up sometime next year in time for the 2020 model year. Related Video:

Genesis G70 to reportedly get Sonata N-Line turbo engine

The Genesis G70 is still relatively new, but that doesn’t mean Genesis isn't going to tinker with it. This report from Car and Driver claims that the new 2.5-liter turbocharged four-cylinder going in the Hyundai Sonata N-Line will also be making its way into the G70Â’s engine bay. Hyundai estimates this engine will produce 290 horsepower and 310 pound-feet of torque in the Sonata. ThatÂ’s a significant improvement over the 2.0-liter turbocharged four-cylinder used as the base engine in the G70 today, which makes 252 hp and 260 lb-ft. Doing the math, the G70 could be getting a boost of about 38 horsepower and 50 pound-feet of torque. Increased power from the turbo four would make the 3.3-liter, twin-turbo V6 less of an upgrade at 365 hp and 376 lb-ft, unless Genesis squeezes out more power. We wouldn't complain about that. The news does casts doubt on the future of a manual transmission option. Genesis offers the manual in only one trim of the G70 now, and thatÂ’s paired with the 2.0-liter turbo four-cylinder. Take that engine away, and we can only hope that Genesis feels itÂ’s necessary to mate up a manual with the new 2.5-liter turbo. As of now, the Sonata N-Line is the only Hyundai announced to use this engine, and itÂ’s being paired with an eight-speed dual-clutch automatic in that application. Car and Driver says the manual take rate on the G70 so far is only 4 percent, which isnÂ’t a promising statistic. The most obvious time for this powertrain news would be paired to a mid-cycle refresh of the G70. As itÂ’s still a relatively new car, we donÂ’t expect to see that until 2021 or 2022. We'll let you know if any of this conjecture becomes reality.

U.S., South Korea strike a new trade deal

WASHINGTON — The United States and South Korea have reached agreement on a new trade pact, the White House said on Tuesday. "We have come to an agreement in principle, and we expect to roll out specific details on that very soon," White House spokeswoman Sarah Sanders told a briefing. Her comments were the Trump administration's first confirmation that the two sides had reached an agreement in trade talks covering revisions to the U.S. South Korean Trade Agreement (KORUS) and a South Korean exemption from new U.S. metals tariffs. Seoul on Monday announced a deal to limit exports to the U.S. of South Korean steel, while extending high U.S. tariffs on any possible South Korean pickup trucks and increasing U.S. automakers' access to the Korean market. But details of the agreement have not yet been released by the U.S. Trade Representative's office, which led the negotiations for the United States after President Donald Trump last year called the 6-year-old bilateral pact a "horrible deal" that had doubled the U.S. trade deficit with South Korea since 2012. The deal is expected to permanently exempt South Korea from Trump's tariffs of 25 percent on steel and 10 percent on aluminum, but South Korea will have to reduce its steel exports to the United States by 30 percent from its average over the past three years to about 2.68 million tons. South Korea was the third largest steel exporter to the United States last year after Canada and Brazil. The agreement also was expected to double South Korea's import quota for cars meeting U.S. safety standards — not necessarily Korean standards — to 50,000 per manufacturer per year from 25,000 previously. The big challenge now would be getting unimpressed Korean consumers to buy them. The 25 percent U.S. tariff for pickup trucks, which was due to begin a phase-out starting in 2019, would be extended for another 20 years, according to South Korean officials. This would virtually ensure that any pickup truck contemplated by Korean automakers Hyundai or Kia for the U.S. market would be built in the United States.Reporting by Ayesha Rascoe and David LawderRelated Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: Reuters Government/Legal Hyundai Kia