2010 Rts Used 3.5l V6 24v Automatic 4wd on 2040-cars

Auto blog

Don't drive some 2001-03 Hondas and Acuras with Takata airbags, feds say

The National Highway Traffic Safety Administration (NHTSA) on Thursday warned owners of certain 2001-03 Honda and Acura models to stop driving their vehicles immediately due greater risks posed by their defective Takata airbags. NHTSA says the airbag inflators have up to a 50-percent chance of exploding in an accident. Dangerous ruptures are more likely to occur in vehicles that spend a significant amount of time in high humidity. About 313,000 vehicles are affected. They are: The 2001 to 2002 Honda Accord and Civic, the 2002 to 2003 Acura TL, 2002 Honda CR-V and Odyssey, 2003 Acura CL, and 2003 Honda Pilot. All of these vehicles were recalled from 2008 to 2011 for being equipped with Takata inflators, but the feds are urging immediate action due to the elevated risk. The inflators in this group of cars have a manufacturing defect that "greatly increases the potential for dangerous rupture when a crash causes the airbag to deploy," NHTSA said. "The air bag inflators in this particular group of vehicles pose a grave danger to drivers and passengers that must be fixed right away," NHTSA Administrator Mark Rosekind said in a statement. Related video: News Source: NHTSA, Automotive News Auto News Honda Minivan/Van SUV Sedan airbag

2015 Pikes Peak Hill Climb: Practice Day 1

Based on what we learned from the first day of practice for the 2015 Pikes Peak International Hill Climb, the quickest race pace up the paved road to more than 14,000 feet above sea level may not be from internal combustion locomotion anymore. "If it all goes well, and the planets align, [under nine minutes] shouldn't be out of the question," said Paul Wilding, team manager for Nobuhiro "Monster" Tajima's Rimac Automobili Monster Sport E-Runner entry. Wilding added that if Tajima's car held up during the week it could finish first overall, which would be the first time an EV takes the overall crown at the hill climb. Last year, the gap between overall winner Romain Dumas' Norma M20 RD Limited and the fastest EV was just over two seconds. In the 2014 race, Tajima finished third in his class. "We think this car is the fastest way up now," said Wilding. "There's no affect from the altitude – this car is a monster, our driver is a monster." The practice, which isn't mandatory but is sanctioned by race officials, concluded Tuesday morning with a few surprises ahead of Sunday's race. Tajima will be racing for the fourth consecutive year in the all-electric modified division. Wilding said today's conditions weren't ideal and the race Sunday could be more challenging than initially expected. "It was a lot bumpier than we expected today," he said. "But today means nothing. It was all [reconnaissance]. Tomorrow means everything." The Honda ARX-04B LMP2 prototype brought to Pikes Peak had a difficult start to the week. Honda Racing spokesman Eric Mauck said the car struggled and didn't run in practice Tuesday. "We're looking for data and research more than anything else," Mauck said. "We're not going for Sebestain's record this year, we're just looking to gather information for years to come." Colorado-native, Honda driver, and Formula E racer Justin Wilson will pilot the LMP2 up the mountain Wednesday – assuming the car is ready. "He's obviously a guy that Honda thinks very highly of. Anytime we have an opportunity to put Justin behind the wheel of anything we want to," Mauck said. Honda driver Tetsuya Yamano, who is driving an all-electric Honda CR-Z in the exhibition class, echoed Mauck's assessment. "We're not making a racecar," Yamano said through an interpreter. "This is part of [research and development] and we're looking to get as much data back to engineers in Japan as possible ...

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.