One Owner 1.8l Cd Power Windows Power Door Locks Tilt Wheel Cruise Control on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Pair of perfect Honda NSX Type Rs go up for auction in Tokyo

While the original Acura NSX is a brilliant supercar in any of its iterations, we never got the best version of it here in America: the Type R. Those came with Honda badges and are right-hand drive only. Unless you're in Japan or are lucky enough to come see an imported example elsewhere, you're not going to come across one of these. To see two practically perfect examples go up for auction at the same time is an even rarer sight. Some first-generation NSX Type R models (1992-1995 model years) can be imported to the U.S. now that they have surpassed the 25-year mark. However, this 1995 model is still a hair too new. Should that stop you from buying it and waiting a few months to take U.S. delivery? Certainly not. This car being offered at Tokyo's BH Auction with a grand total of 534 miles on its odometer. The seller claims it's 100% original and in pristine condition. Honda did a lot to transform the NSX into the first Type R of many to come. To start, engineers cut 308 pounds out of the car by using aluminum in even more places than before, deleting sound deadening, eliminating the A/C and stereo and using carbon-kevlar Recaro bucket seats. The 3.0-liter V6 was balanced and blueprinted. Then the suspension was given a full makeover with stiffer dampers, springs, bushings and a larger front sway bar. There were plenty of other little things throughout, but we'll spare you the long list. The number you need to know most is the estimated auction price. BH Auction thinks this NSX Type R will go for $227,000 - $272,000. 2005 Honda NSX-R View 21 Photos Next up is the ultra-rare 2005 Honda NSX-R. This R was based-off the NA2 NSX, so it has a 3.2-liter V6 and six-speed manual transmission with the new bodystyle that ditches the pop-up headlights. The 2005 model year was the last for the first-gen NSX, meaning this R is just about as new as they come. Many of the modifications that Honda did for the first Type R were repeated here. This model used carbon fiber more judiciously, though, replacing the hood, deck lid and spoiler with the lightweight material. The auction house claims just 140 NA2 NSX-Rs were made, so this is an incredibly rare car. Sadly, nobody here will be able to import it and drive it on American roads for quite some time yet. The price is estimated to come in at $345,000 - $436,000. That's pricey but this NSX has an even lower odometer reading than the other at just 348 miles.

2017 Honda Ridgeline: Not a 'youth truck'

When the Ridgeline debuted back in 2006 I predicted it would be a game changer, that it would shake up and redefine the truck market, much like Honda's CB750 four-cylinder motorcycle redefined the big bike market back in 1969. Boy was I wrong. Or perhaps more accurately stated – hang on, because I still think it could happen with this new model. Maybe not to the same degree of the CB750, but I definitely think this gen-two model has the right stuff to make truck buyers give it a second look this time around. Also, the truck market has changed over the last decade. People have had a chance to see the Ridgeline in action, and many have come to the conclusion that, used as intended, it's really not so bad. ...And then look what's happened to the commercial van market: Euro-style vans – which are dramatically different from Detroit-style vans – have virtually taken over that market segment. Typically conservative truck buyers have shown that they are willing to accept new thinking – if they prove to be better mousetraps. In the last 10 years, Honda – and specifically Honda marketing – has learned a lot about what worked and what didn't work with the gen-one model. Yeah, it barely sold, but those who bought the truck absolutely loved it. So Honda was indeed on to something. The problem was not enough people knew about it. I blame Honda corporate and their marketing department squarely for that. After the initial customer reluctance, Honda gave up on it. There was virtually no money spent on advertising this truck. It literally died on the vine because it wasn't watered. Also, there were a number of factors going on here not specifically related to the Ridgeline. Honda, the corporation, was in a severe crisis. Sales were sliding, many of its products disappointed, and the styling of many of its vehicles was polarizing. Also, the Acura division was in a free-fall. In short, Honda had lost its mojo; and as such, money and efforts were re-diverted to righting the ship, and marginal models (Ridgeline) were abandoned in terms of promotion; or just abandoned, period. So here we are now in 2016. Honda has been in the process of exorcizing all the evil from it's products, and is again showing signs of life. They have a slew of new vehicles that look good and are getting good if not excellent reviews, and a new Ridgeline is soon to hit showrooms. The Honda mojo is back. This time around there is no attempt to hide its parentage.