2013 Gmc Yukon Slt 8 Pass Nav Rear Cam Htd Leather 13k Texas Direct Auto on 2040-cars

Auto blog

2017 GMC Acadia loses 700 pounds, gains everywhere else

Ladies and gentlemen, welcome to Acadia. The 2017 version of the three-row GMC crossover has all kinds of newness. The 2017 Acadia has lost 700 pounds compared to its predecessor thanks to high-strength steels allowing redesigned parts, and the fact that it overall, the vehicle is actually smaller. Length is reduced by 7.2 inches on a wheelbase diminished by 6.4 inches, it is 3.5 inches narrower and sits 3.9 inches lower. The 2016 Acadia was 4,656 pounds, the 2017 is 3,956 pounds. GMC says it will still swallow people, but not as many: the eight-passenger option didn't make the transition, potential three-row trims permitting five-, six-, and seven-passenger configurations. While you lose space, you gain convenience with a split-folding second row featuring tilt-and-slide for both sections. The third-row seats fold flat into the cargo floor, and if the second row is folded as well, cargo capacity improves over the 2016 Acadia, 79 cubic feet compared to 70 cu-ft. A new 2.5-liter four-cylinder brings a second engine option to the spec sheet, returning an estimated 22 city miles per gallon and 28 highway mpg with the help of stop/start tech on front-wheel-drive trims. The new 3.6-liter V6 gets around 310 horsepower, a power bump of about 19 hp, and an estimated 25 highway mpg in front-wheel-drive guise. Towing capacity for that V6 goes down, though, from 5,200 on the current Acadia to an estimated 4,000 pounds. The optional Tow Vision Trailering system will make that pulling easier. Both engines are hooked to a six-speed automatic. Now we can get to its looks. Trademarks like the square, flared wheel arches, dark D-pillars, and wraparound rear side windows made the transition, everything else is new. While weight has gone down, safety's gone way up with internal changes like the splayed chassis members to confront the small-offset test. New active safety upgrades run from from three kinds of automatic braking systems to surround vision cameras, automatic high beam control, a safety alert seat, and a following distance indicator. Buyers can choose from a front-wheel drive, all-wheel drive, or All Terrain model, each with its own electronic drive selector modes. The Normal, Sport, and Trailer/Tow modes are common to the trio. The FWD gets a Snow mode, the AWD adds adaptive 4x4 and Off Road modes; on the AWD, the 2x4 mode disconnects the rear axle from the drivetrain.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.

Will GMC enter the subcompact crossover segment after all?

GMC last year categorically ruled out launching a subcompact crossover positioned below the Terrain, but the decade-old rumor refuses to die. The on-again, off-again model is back on track for production, according to a recent report. Citing anonymous sources, enthusiast website GM Authority claims the soft-roader is closer than ever to receiving the proverbial green light for production. It hasn't been approved yet, so development work hasn't started. What it will look like if it receives a thumbs-up from executives is up in the air, but GMC can take several paths into this lucrative (and increasingly popular) segment of America's new-car market. Chevrolet has two fighters in the ring: the Trailblazer and the Trax. GMC could feasibly choose one, put it in a brand-specific wrapper, and call it a day. It could also design its entry from scratch, though this option would take longer and cost significantly more. Either way, the model will allegedly be called Granite or Graphyte, and it will be positioned below the Terrain in terms of size and price, meaning it would likely start above $20,000. In 2019, GMC explained it ruled out expanding its range towards the bottom to position itself as a premium brand. It wanted to focus on high-profit models, like the Sierra and the Canyon, but the crossover's ever-increasing popularity may have proven too alluring to resist. Besides, small and premium aren't mutually exclusive, and downsizing would help the brand increase its annual sales. If you're experiencing deja vu, it's likely because we've heard murmurs about a city-friendly GMC since the Granite concept (pictured) made its debut during the 2010 edition of the Detroit Auto Show. It was approved for production that year, approved again in 2011 (tentatively on a Cruze platform), and abruptly canceled in 2012. GMC hasn't commented on the report, so we'll need to be patient to find out if it's accurate — and how it would differentiate its entry-level crossover from Buick's. In the meantime, the company is putting the final touches on the electric Hummer, which will be offered as a pickup and as an SUV, and it's about to unveil the 2022 Sierra. Featured Gallery GMC Granite Concept Rumormill GMC Crossover