2008 Gmc Yukon Denali Sport Utility 4-door 6.2l on 2040-cars

Auto blog

2021 Chevy Silverado, GMC Sierra fuel economy to go down due to global chip shortage

Production of the 2021 Chevy Silverado and 2021 GMC Sierra is continuing, but the global semiconductor chip shortage is resulting in a mid-year change. Or rather, an omission.  Basically, the availability of cylinder deactivation for the 5.3-liter V8 will be significantly reduced, resulting in a reduction of 1 mpg combined for affected models. This applies whether that engine has the six- or eight-speed automatic, as well as to both the regular Active Fuel Management and the more advanced Dynamic Fuel Management cylinder deactivation systems. DFM does remain with the pairing of 5.3-liter V8 and 10-speed automatic that comes standard on the LT Trail Boss and High Country. "Due to the micro controller shortage, the components that control AFM/DFM in the engine control module (ECM) have been removed," GM spokesperson Michelle Malcho told Autoblog. She also indicated that the engines will still have the AFM/DFM hardware in place, but that GM will not allow activation of the systems in the future with an ECM change.  Malcho also confirmed to Autoblog that the Silverado and Sierra's other engines will continue to have AFM and DFM, including the 2.7-liter turbo inline-four, 4.3-liter V6 and 6.2-liter V8. In an earlier statement to Reuters, she declined to say the volume of vehicles affected. "By taking this measure, we are better able to meet the strong customer and dealer demand for our full-size trucks as the industry continues to rebound and strengthen," Malcho wrote Reuters in an email. The change runs through the 2021 model year, she said. Malcho told Reuters it would not have a major impact on the Detroit automaker's U.S. corporate average fuel economy (CAFE) numbers. "We routinely monitor our fleet for compliance in the U.S. and Canada, and we balance our portfolio in a way that enables us to manage unforeseeable circumstances like this without compromising our overall (greenhouse gas) and fuel economy compliance," she said. GM's fleetwide fuel economy in the 2018 model year was 22.5 miles per gallon and was projected to rise to 22.8 mpg for 2019, according to a report by the Environmental Protection Agency. To meet federal CAFE requirements, automakers like GM often use credits from either earlier years where they faced less stringent rules and performed better than the requirements or buy credits from other automakers. GM said last month the chip shortage could shave up to $2 billion from this year's earnings.

GM investing $2 billion in Tennessee plant to build Cadillac Lyriq, other EVs

DETROIT — General Motors said on Tuesday it will invest $2 billion to convert its Spring Hill, Tennessee, factory to produce electric vehicles, starting with the new Cadillac Lyriq, alongside existing combustion-engine Cadillacs. Spring Hill will be GM's third U.S. electric vehicle factory, along with existing plants in Detroit and Orion Township, Michigan. The Tennessee plant was built in 1990 as the exclusive source for GM's now-defunct Saturn brand. The Cadillac Lyriq crossover is slated to go into production in Spring Hill in late 2022, according to AutoForecast Solutions (AFS), which tracks industry production plans. AFS said it expects some electric vehicle production will be announced at a later date for a factory in Mexico. Among additional investments, GM on Tuesday said it will spend $32 million at its truck plant in Flint, Michigan, to increase production of the Chevrolet Silverado and GMC Sierra heavy-duty pickups. GM will spend $100 million to shift production of the redesigned GMC Acadia crossover from Spring Hill to a plant near Lansing, Michigan. Spring Hill will continue to build the gas-engine Cadillac XT5 and XT6 crossovers. The plant also will build other future electric vehicles in addition to the Lyriq. The automaker's plans for investing in U.S. factories comes with two weeks left in the U.S. presidential election campaign. President Donald Trump and Democratic rival Joe Biden are competing for support from auto workers in Midwestern swing states. GM Chief Executive Mary Barra has outlined plans to invest $20 billion by 2025 in new electric vehicles and battery technology. The automaker is spending $2.2 billion to overhaul and retool its Detroit-Hamtramck factory to build a GMC Hummer EV electric pickup truck in late 2021, followed by an automated robotaxi and other electric vehicles. GM builds its electric Chevrolet Bolt at a large assembly plant north of Detroit.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.