1999 Gmc C1500 Suburban Slt Sport Utility 4-door 5.7l on 2040-cars

Auto blog

Diesel details: Comparing Ram 1500 EcoDiesel, Chevy Silverado Duramax, Ford F-150 Powerstroke

With specifications for the 2019 Ford F-150 Power Stroke diesel already out, and the details on the 2020 Ram 1500 EcoDiesel and Chevy Silverado Duramax (and its GMC Sierra twin) trickling out, we felt it was a good time to start comparing the full-size trucks' light-duty diesels. Bear in mind, we've only driven one of these new diesel trucks, so we'll be sticking to numbers for now. Some numbers haven't been announced yet, either, but stay tuned, because we'll be updating this post with additional specifications as they become available. And if you want to compare any other versions of these trucks with other vehicles, be sure to check out our comparison tool. Now let's start comparing, starting with our big chart of numbers below. As we can plainly see, these trucks are quite closely matched. Each one has six cylinders, a displacement of 3.0 liters and a turbocharger to boost it. The output of each is somewhat close, too. The Ram 1500 EcoDiesel is the torque king at 480 pound-feet, 20 more than the GM trucks and 40 more than the Ford. The GM trucks win on power, though, with 277 ponies, 17 more than the Ram, and 27 more than the Ford. GM does report that you get their trucks' peak 460 pound-feet of torque from 1,500 rpm to 3,000 rpm, whereas the others only report peak torque at a particular point in the rev band, but all of these trucks should have wide, flat torque curves as you would expect from modern turbodiesels. 2020 Ram 1500 EcoDiesel View 8 Photos Engine output is only one part of the truck performance equation. We also have towing and payload capacity, as well as fuel economy. With towing, the Ram 1500 is the current leader with a maximum capacity of 12,560 pounds. That tops the Ford F-150's 11,400-pound tow rating by well over 1,000 pounds. The F-150 can carry 2,020 pounds in its bed, but we don't know yet whether that's better or worse than the Ram or the GM trucks. We also don't have numbers for the GM trucks' towing capacities. View 9 Photos As for fuel economy, the Ford F-150 manages a thoroughly impressive 22 mpg in the city and 30 on the highway with two-wheel drive. Choosing four-wheel drive drops those numbers to 20 and 25 respectively. The fuel economy numbers for the Ram, Chevy and GMC haven't been revealed yet, but for some comparison, we can look at the old Ram EcoDiesel. That truck's best fuel economy was 20 in the city and 27 on the highway with two-wheel drive.

2021 GMC Canyon gets AT4 trim and a 'more upmarket' Denali

The AT4 train continues at GMC, with the 2021 Canyon AT4 climbing to altitude in Vail, Colorado, to announce its arrival. The off-road package, teased during the Sierra HD launch last year and already rolled out on the Sierra and Acadia, replaces the Canyon All Terrain trim. The rectangular grille goes away, the new rig picking up a larger, Sierra-like grille with a dark chrome surround and vertically-oriented fog lights. And because nothing says off-road badass like red recovery hooks, of course there's a pair peeking out from under the tweaked lower bumper. Otherwise, all the All Terrain kit carries over, like the tuned suspension with Advanced Hill Descent Control, transfer case skid plate, automatic locking rear differential, and 31-inch Goodyear Wrangler DuraTrac® tires on 17-inch aluminum wheels. Inside, the headrests are embroidered with AT4 logos, and Kalahari stitching is exclusive to this trim. GMC also announced a more polished Denali trim, without providing any photos. The coming pickup adopts a grille with a "more sculpted and layered pattern," plus five-inch chrome assist steps, and 20-inch Diamond Cut aluminum wheels that we'll assume come in a different pattern than the current 20-inch Diamond Cut aluminum wheels. The cabin goes upscale with open-pore ash wood trim and aluminum trim, a new Cocoa/Dark Atmosphere color theme, and unique stitching. Both the AT4 and Denali offer the same two engine choices. There's either the 3.6-liter V6 throwing out 308 horsepower and 275 pound-feet of torque, shifting through an eight-speed automatic, or the 2.8-liter Duramax diesel producing 181 hp and 369 lb-ft, shifting through a six-speed auto. The 2021 trucks will be available later this year, pricing to be announced closer to the on-sale date. The 2020 Canyon All Terrain starts at $37,695, the 2020 Canyon Denali starts at $41,595. Featured Gallery 2021 GMC Canyon AT4 View 11 Photos Related Gallery 2021 GMC Canyon AT4 View 11 Photos GMC Truck Luxury Off-Road Vehicles

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.